hi again..
now i did something too badly..
i tried to flash touch it 2.0,- it did not worked.
then i flashed it back to official wm5, it worked.
here, i did something-i do not know what, but next hard reset, my pda stucked in bootloader mode:|
(and the bootloader was not tricolor, just green and black (??) )
next HR:
since then it is tricolor..
i tried hard reset, soft reset, turn it to bootloader mode, and flash it again with official:
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
they said:
error 300
the ruu cannot be used for your pda, get newer ruu.
??
i flashed that roms twice yesterday..
so i did something too badly
please help me
nh not a brick to me
just flash the padviet rom
or the touchit
boh are fine and will deal the problem
it asks a password:|
the official roms: error 300: invalid update tool, get newer one, but where?
at htc.com, that is the only one update tool and it doesnt works!
3.5.*.*
help help help me please
Related
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
felixflo said:
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
Click to expand...
Click to collapse
As long as its getting into Bootloaders (RGB) nothing to worry.
Most probably you have a weak or dead battery,recharge it fully and flash the official stock rom in Bootloaders,it'll recover back,but if the battery is gonner,get a new battery.
thx
now when i try to flash the rom...ERROR invalid update tool
....
Download it
Down load a RUU from the TNT's ROM i think is the better Ruu for wizard but search it men or try the Mun's one!
Hi ,i have put ruusigned_072stockspl ( i rename it to kovsimg.nhb ) image into my card and bot it up , but it says loadin ..... all the time , and i have bean waiting about 4 hours
what shall i do to make these work
did it flash? i hope not because if it did flash you will be most likely hanging in bootloader ALL the time you start your phone.
flash your stock spl only with RUU over windows...
if that is the case search for mTTy and the required instructions.
they can be found in the hard spl thread.
it was something with 'set 14' and 'set 16'.
regards
yes i'm stucked in botloader every time when i turn on the phone , and mtty doesn't work , it says : USB port cant open
Try to flash a stock rom
i used mtty tool and i fixed boot up screen , it s ok now
thanks guys
omg , it looks like i havent fix the problem complitely , i just managed to turn the phone on without going automaticli into bootloader , and now it doesn't want to flash custom rom , it stuck's into white sreen with loading on it
That could be because you messed up the spl. Try to reinstall the hard-spl. If you manage to do that your problem should be solved
Finaly i made it work after doing hard spl just as recomended , at first it didn't want to do a hard spl but after 1 hour i managed to make it work , and than i flashed custom rom and now it works great
Thank's guys for your help!!
Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed
somehow i change the HardSPLWrapper from 1.56.OliNex to 1.14.OliNex.
then my HD stoped working and its show me the "red,green,blue,white" screen with this MSG :
BLAC100 300
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgreade ROM code error please try again.
Click to expand...
Click to collapse
if i connect the cable its show me USB.
when i try to update the ROM version or update the SPL to 1.56.OliNex. it show me the MSG in the attachment.
plz tell me what to do. this is the second day without my HD. + im in philippense those days i dont know where to fix it.
thanx
Hard reset.
Try some hard reset and then do flash again to higher hard spl 1.56.
Rom.
If the hard reset doesnt help flash with stock rom and do te hard spl again.
mcnaget said:
If the hard reset doesnt help flash with stock rom and do te hard spl again.
Click to expand...
Click to collapse
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
Not sure if it helps, but maybe you can try flashing stock ROM using USPL?
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
yes try USPL 2.5
ill go through it with you
CaponiND + jigners
thank you.
i tried the USPL 2.5
but still it show me spl-1.14.
and after updating the ROM.
its stuck on the setup screen : tap the screen to setup your device.
+ something wrong with the screen color.
Boot.
Remove battery for some time,try to get in to boot loader from device not from windows,restart windows if there are any usb connections or processes in windows that prevent from flashing. Insert usb cable in different usb port. Try on a different pc.
the boot problem is finished. after i change the USB port.
i update to SPL-1.56, then i update the ROM.
but still its stuck on :
tap the screen to set up your windows phone.
when i tap the screen, the screen comes bright. but nothing change.
and its vabirate for a second. from time to time while its on the set up screen.
thanx mcnaget but still i need a help.
Battery.
Remove the battery for 24 hours and try again.
24 hours more
ok ill try, thnx alot.
Battery.
I have read in some post that this could help but if it is a hardware damage than none of this would help.
I wish you best of luck to bring him back to life.
Regards.
thanx
still stuck at set up screen.
i notice some thing when i update, usually it show me in the box :
verify that you want to update the ROM version :
from :
Image Version : "the previous ROM"
to :
Image Version : "the next ROM".
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
See the attached Pic.
Rom.
Have you try manualy to go to boot loader.If you already have olinex 1.56 try some different stock rom.
yabdoo said:
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
Click to expand...
Click to collapse
This is normal behavior when flashing from/to custom made ROMs, at least with USPL (never tried HSPL )
Hi guy's...
I need you help please.
So I have this phone for a while and sort of got bored with the same look everyday and thought I should change the rom... Was looking for the most compatible one for this phone and I had to do some steps before flashing the new rom. I got to the point where I need it to flash the custom recovery and there I got in trouble.
I was using SP Flash Tool v5.1628... but after the flashing I was thinking let me quick turn the phone on to check something, and I see that the phone won't turn on ... and there I got mad... my fault of course but tried to flash all stock roms for this only model... Starting with: 0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.01.401.8_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
Then:
0PM1100_A32MG_DUG_K44_SENSE53_htc_asia_1.03.707.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
After:
0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.06.401.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release
And the last:
0PM1100_A32MG_DUG_K44_SENSE53_htc_europe_1.07.401.1_Radio_MOLY.WR8.W1315.MD.WG.MP.V62_P4_Release_2_4
Nothing happened but all worked till the HTC logo loop with the message at the bottom : Tool DL Image Fail.
The phone is rebooting itself all the time and can't turn it off except if I format the phone with SP Flash Tool.
Can someone please help me I trully need this phone and don't want any custom rom anymore just the stock and a working phone.
Thank's a lot...