Is your Kaiser wobbly / sloped ? - Tilt, TyTN II, MDA Vario III General

Been very happy with the Kaiser so far, including on the GPS front ;-) but I'm getting slightly annoyed by two hardware nits :
1. wobbly : in portrait mode when I tap on the screen the right side tends to "hit" the keyboard part underneath and looking closely it's easy to understand why, there is a tiny gap between the two parts, likely for the slide/tilt mechanism
2. sloped : when I pull out the keyboard, the right side of the screen goes out more than the left side so it is slightly sloped. It improved a bit when folding the screen. Again I think this is a constraint of the slide/tilt mechanism
I'm thinking it's a general quirk because I had to change my first model (stuck key) and it had the same problems.
Anyone else noticed that ?

in portrait mode my kaiser seems to be spaced the same all the way around and doesnt push on the keyboard when tapping the screen. I do notice what you mean by the keyboard appearing to be farther out on the right side but after taking a closer look it just seems that way because of the face plate not being uniform all the way down (part where it flares out on the left side). Mine is exactly pushed out on both sides.

Lavachild said:
in portrait mode my kaiser seems to be spaced the same all the way around and doesnt push on the keyboard when tapping the screen. I do notice what you mean by the keyboard appearing to be farther out on the right side but after taking a closer look it just seems that way because of the face plate not being uniform all the way down (part where it flares out on the left side). Mine is exactly pushed out on both sides.
Click to expand...
Click to collapse
Mine's the same as this. It sounds like yours may not be quite right and I'd consider getting a replacement. Of course, if you can live with it, and the functionality is all there then it's entirely up to you.

For the sloping I've had two and they were both the same, so it's probably a design constraint, no biggie.
For the "wobbling", it comes and goes, I can only really feel the "knocks" when I hold the left side tight and tap on the scroll bar on the right, again, no biggie.

solution
iv had the same problem of one end sticking out,
iv gone around it by inserting some tiny smugged paper into the sliding slots at the back, resolves the issue quite well.

I don't seem to have either problem (TyTN II version).

Related

screen leans to left when keyboard out?

Hello -
I have noticed that when I expand the keyboard on my Tilt, it's tilted slightly to the left. The upper right corner is just a hair higher than the left, even when the screen isn't actually tilted. This doesn't really affect anything but since the Tilt is brand new, I want to exchange it for a new one IF this is a real problem and could indicate that the hinges are off, etc.
Has anyone else noticed this?
thanks, Dave
It's the same for me, I don't think it is a defect, depending on how much it is tilted. For me it is bearelly noticable...
Same for me too. It was (I thought) very noticeable when I first got it, and now I only notice it now and again. No-one else that I've shown it to has.
Hmm... Well, it IS pretty subtle! I can live with it no problem, and I didn't notice for the first day or so. I just want to make sure it's not a defect because i wanna exchange it right now (while I can) if it is.
I've noticed that I can make the screen perfectly horizontal by pushing down slightly on the upper-right corner of the screen when it's expanded/tilted. It just springs back a couple of millimeters when i let go!
Anyone else have this issue?
Perfectly normal

Screen alignment/Slide issues

On my ATT Tilt when ever I close the sliding screen now it does not line up properly. The screen sites a few millimeters to the right of where it should. I called ATT and they said that Slide issues aren't covered under warranty. Anyone else having a similar issue?
No problems here, although keyboard sliding is a bit easier to move since the day I bought it and it sometimes moves when I don't expect it to...
Yeah it def slides easier, but it doesn't line up properly.
I've dropped mine many times (only onto carpets so far, happily) and on occasion have found the top half of the phone slightly misaligned with the rest - resulting in a lip at the top, bottom, or right hand side. I've found that with a little gentle but firm nudge the other way, it usually fits back into place. I think there's a little movement designed into the whole thing, to allow it to take repeated sliding and the odd knock without the stress damaging anything.

Is this normal?!

Hey everybody. I've been using my Xperia for about 2 months now. However, while messing around with it the other day, I realized that it's kind of shaky. For example, if i "press" against the silver finish all the way to the right of the screen, the top part of the phone shakes a little (like it moves kind of inward). Also, when I press the bottom right soft key, the same thing happens. It shakes a little, and it's not too big of a deal but it's annoying.
Another thing is that the keyboard also slides out very easily. Like way too easily. While using the touchflo 3d with one finger (sliding to the right), for instance, unless my finger is completely dry and moving on the screen very smoothly, the screen moves to the right slightly (the way the keyboard opens).
Also, when the keyboard is out, if i "press" towards the top part of the screen, it also shakes. It feels kind of loose.
I just wanted to know, is this normal? If not, what should I do, as I bought this phone from ebay.
Other than this problem, I love my Xperia. It's very functional and like a mini PC. If it wasn't for this place, though, I think I would have probably been VERY, VERY dissatisfied with my Xperia (with the stock rom).
Thanks in advance. Any help would be appreciated.
Edit: My phone is a silver, Xperia X1i model.
I don't think that's normal. Do you tend to slide out your keyboard a lot? Have you noticed any cracks near the stylus btw?
Holy-!
How much force are you using on the screen?! My slider is exceedingly solid. Absolutely no give, and even if I use TF3D it doesn't move.
rickysio said:
Holy-!
How much force are you using on the screen?! My slider is exceedingly solid. Absolutely no give, and even if I use TF3D it doesn't move.
Click to expand...
Click to collapse
I think that's out of normal
My Black X1 has about 1mm play, on the left side. On the right side it is less, but it can be felt, exactly as you mention.
As for opening, I have no problem with that, it gives just reasonable resistance.
i try to peat as least pressure as possible while using tf3d. i also dont slide out my keyboard THAT much. and no, no cracks near stylues.
apparently, this is not normal. any advice?
redo the screen calibration, now applying as LITTLE force as you can to get the press registered, and try again. Xperia has some sort of vario force meter on the touchscreen - the more force you use during calibration, the more force you need during normal usage.
another issue i have with my phone (not hardware related) is the fact that when i use high quality on my youtube app, watching the video is sooooooo laggy. is there any fix for this
It's a limitation of the current app, most likely it's incapable of taking advantage of the native hardware decoding the MSM7200/7201/7200A/whatever chipset offers.

Screen Distortion / Ripple

Does anyone else have this problem:
When you're just pressing a bit harder than the usual touch, on the top and bottom Left side bezel, it causes the Screen to ripple (fluid wave effect).
Not even pushing down too hard, just a firmer press than usual. This is easy too see on a darker background, like the default background when the device wakes up and still in locked mode.
Yes I realize it's a LCD screen, plus this Corning glass is thinner, and we're not always pressing it that hard to notice anyway.
But the Right side bezel and other areas are mostly fine,
So I'm wondering if it's a defect on my device or not (the left side being too sensitive)? would this cause further problem in the future? And it could be a concern if I carry the Nexus 7 in the backpack and other items pressing on it.
Other reports on this:
http://www.theverge.com/2012/6/29/3125396/google-nexus-7-review
"the display can give a little and cause the LCD to ripple if you really press hard against the screen"
http://forums.androidcentral.com/google-nexus-7-tablet-forum/191040-screen-distortion.html
I wonder if I try the Fix on the other thread, taking off the cover, but instead, loosen the screws a bit on the left side, would that help?
Thanks!
Hi,
My device has this too. Mostly on the left side & a little less on the right side but hardly any on the top or bottom.

A multi-touch issue masquerading as a touch sensitivity issue?

Ok, so I thought I was having a touch sensitivity problem on my Nexus 4, because often a touch or a swipe would go unrecognized...
Then I realized I was noticing it especially in these two situations:
-Turning wifi slider switch on/off
-Swiping back to a previous tab in chrome
Turns out, what was going on was when I reached that far with the thumb, my palm was touching the curved edge of the screen, making it think I was already touching with a different finger. This "numbed" the screen from my intended touch until I shifted my hand slightly, releasing the unintended multi-touch situation. This made the issue seem sporadic.
I am not saying this is what all other people are experiencing, I am just putting it out there in case someone else is unknowingly doing the same thing. I could also imagine typing errors on the far side of the keyboard for people with certain hand shapes.
It seems almost unavoidable due to the thin bezel and rounded edge, but I would think problem could be avoided with some clever "palm touch near edge" recognition code, but until then I just have to get used to not gripping the phone so tight.
-copperwatt
I think that might be the case also. In some instances, it seems like I can't tap on the screen, but it can swipe and if I reposition my hand, it will work.

Categories

Resources