I need your help urgent as my kaiser is the first pocket pc for me as I was using nokia communicator before; and I need any fax program to use it with my kaiser urgent as my line has the fax service enabled from the opreator please help ms as I need this service urgent
emad.ibrahim said:
I need your help urgent as my kaiser is the first pocket pc for me as I was using nokia communicator before; and I need any fax program to use it with my kaiser urgent as my line has the fax service enabled from the opreator please help ms as I need this service urgent
Click to expand...
Click to collapse
Seems that KSE Truefax (v3.01 which should run perfectly on WM6 although it's from 2004) is about the only solution there is to find out there... Google some more maybe
Moaske said:
Seems that KSE Truefax (v3.01 which should run perfectly on WM6 although it's from 2004) is about the only solution there is to find out there... Google some more maybe
Click to expand...
Click to collapse
I already tried KSE Truefax but it does not work at all, is the mode enabled on kasier ?
Related
Hello,
I bought the Herald because I wanted to use VOIP on it eventually.
But then it doesn't seem to work quite as expected. The main problem is that the sound doesn't come from the earpiece but from the speakerphone instead...
Has this problem been solved???
Thanks in advance!
/Stig
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
cgigate said:
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
Click to expand...
Click to collapse
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
zerodiscount said:
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
Click to expand...
Click to collapse
anyone bother to read around a bit...
it uses the same dialer for GSM and for VoIP calls.
anyway - fring is the best solution
Hi there I have problem with Infra. I tried both version of WM6 but still when I want conect or send something via IRDA my Himalaya freezes. But I have instaled NoviiRemote deluxe and it is working. Only one think I have to do is change port wehere is IRDA throught menu-preferences-IR setup-autodetect. Can somebody help me.
PS: With WM5 IRDA working properly
PSS:Sorry for my dry English
I use NoviiRemote Deluxe 4.11, but it doesn't work on my PDA. I don't know how to make it work on PDA
NoviiiRemote Works perfectly with my PDA i.e. xda2..u have to make it learn it ur desired remote control..just place both irdas in front of each other and press the desired button on PDA first and then on Remote..when u hear a beep voila ur done
Ather90, thank for your suggesion, it is working now. Sorr for my mistake, I am noobie
I have another software which is connected to IR e.g Vito Osciloscope. If you have experience with this sofware, could you please comment to this software whether working or not in WM6
sorry but i havent used this software..u can read more about it here : http://handheld.softpedia.com/get/System-Utilities/IR-Apps/VITO-Oscilloscope-5029.shtml
but i will try to install it on ma device and post back
ORIGNALLY WRITTEN AT VITO TECH'S WEBSITE : The same requirements as for VITO Remote. You can try VITO Remote for free and if it works, VITO Oscilloscope will work as well.
ARM or XScale based Pocket PC
Operating System Pocket PC 2000/2002/2003 (+ Phone Edition)
Click to expand...
Click to collapse
SEE THIS..IT MEANS THAT IT COULD WORK PERFECTLY
ather90 said:
SEE THIS..IT MEANS THAT IT COULD WORK PERFECTLY
Click to expand...
Click to collapse
But It doesn't work is it working in your device ? I can install it but When I tried to receive IR radiation from TV remote control , it didn't give any signals
i cant download it..but i will try A.S.A.P
ather90 said:
i cant download it..but i will try A.S.A.P
Click to expand...
Click to collapse
Yes of cource, from your link, it was deleted, you can find only help file I will send you later
no needs i have downloaded it will try it A.S.A.P
I have just installed it..i have the same problem..i cant recieve any signal detection
ather90 said:
I have just installed it..i have the same problem..i cant recieve any signal detection
Click to expand...
Click to collapse
Thank you to give me information soon so it is clear this software doesn't work.
The idea of this software is very good for engineering. As I know, I don't see any software which have the same function like this one.
Same Problem with my phone too
hi mate
i have already post the problem as i have tried everything with phone even with hardware testing too, seems its only the software problem in this rom
i have my xdaII with broken cahrging base and cannot connect to active sync anymore now but if i want to sync my phone with irda or bluetooth phone just freeeeezzzzes........
always needs to restart again for the wireless access ...
if possible some one can help me with sync Tracks for XDA 2 so tht i can try soldering the only charging and sync track atleast....
please help..........
tofclock
ROM VERSION 6.00
ROM date :09/08/07
RADIO :1.08.00
EXT rom__________
hmm
Hi there is screen shot from IR setup in novii after IR autodetect is it normal?
Yes its normal...
hi,
Can someone tell me how to connect to WLAN ?
the connection disconnect every few seconds, why ?
thnx
Maybe you used wrong settings, you are (nearly) out of range or the accesspoint uses a MAC-Filter.
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
what ecltech said. And YES you need activesync installed or else your pc won't realize your device and ask you to add new hardware. With activesync it updates the usb drivers to recognize that you are connecting your device and sharing its internet.
Haven't tried the Bluetooth way yes so I wouldn't have an answer for that one.
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
Thxs ill try it
Bluetooth works fine. When you configure the Bluetooth on your laptop use advance configuration so you can use the WAP setting. Otherwise it defaults to the modem and asks you for dial settings/etc.
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Couldnt do it
Can anyone give me step by step instructions
PLEASE
Hello chefs and others,
I'm looking for voip support from wm6.1 build 20721, meaning these 3 files (AFAIR): dnsapi.dll, voipphonecanvas.dll and rtcdll.dll.
Tried a few roms so far and neither of them supported voip, and i need it for my SIP
Tried to install various voip cabs (win6voip.cab, destr0_VOIP_WM61__SIP_Config_1.1.cab), but they all kill my gps.
There are some threads about this but non of them gave me an answer.
I hope you can help me. I don't want to choose between SIP and GPS.
regards,
--
Dragilla
When you say it kills your GPS what do you mean??? Just installing the cab or actually using it at the same time??
I use VOIP all the time and I haven´t noticed any problems with my TomTom although I never have them running at the same time
I mean just installing the cab causes the gps to be dead. It's not seen by any app. HTC_GPS_Tool doesn't show any NMEA frames, GPS Test pauses detecting gps on the port on which the gps should be.
I don´t have this problem and I use VOIP everyday.... so try my cab and let me know.
The only problem I have is the sound doesn´t come thru the internal speaker... but hey I´ve had this problem with Kaiser, Polaris and now Diamond so I´m used to it . The only device I had it working with the internal speaker was the Hermes.
Interesting
With standart win6voip.cab i had the sound through internal speaker. The SIP worked fine... only the gps was dead.
Will try your cab in a sec
I wonder if this matters that I use a never windows build... it could matter IMVHO...will see
Seems to solve the problem for me
Though I have the same problem with the sound coming out of the externat speeker, but I can live wih that
PS: in sip conf tool i can't set the registry entry saying i want to use sip on 3g as well, but that doesn't seem to matter because sip works on 3g anyways
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Thank you all for help - hopefully we can fix the speaker problem some day.
regards,
--
Dragilla
dragilla said:
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Click to expand...
Click to collapse
Schapps adv conf. also does that
dragilla said:
Seems to solve the problem for me
Though I have the same problem with the sound coming out of the externat speeker, but I can live wih that
PS: in sip conf tool i can't set the registry entry saying i want to use sip on 3g as well, but that doesn't seem to matter because sip works on 3g anyways
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Thank you all for help - hopefully we can fix the speaker problem some day.
regards,
--
Dragilla
Click to expand...
Click to collapse
Glad solved your problem!!! Maybe you can change the title of this thread and say this CAB at least solves the GPS compatibility problem.
No idea how to change thread title. I'm affraid only moderators can do that
dragilla said:
No idea how to change thread title. I'm affraid only moderators can do that
Click to expand...
Click to collapse
It´s fairly easy just edit the first post with Advanced editing button....
1. step press edit on post
2. at the bottom of that screen press Go Advanced
3. then you can edit the title
You can do it from here http://forum.xda-developers.com/forumdisplay.php?f=430 with double click in the end of line on your thread.
panosha said:
You can do it from here http://forum.xda-developers.com/forumdisplay.php?f=430 with double click in the end of line on your thread.
Click to expand...
Click to collapse
I never knew that.... that´s good to know. Thanks Panos. How are you anyway??
Done
Thanx for the advice.
UNLOCKING VoIP SIP Capabilities on Windows Mobile 6.1 XPERIA kills GPS
Regarding: iGO8 problems on XPERIA and WINDOWS MOBILE 6 PDAs and SMARTPHONES.
Anybody who unlocks the SIP VoIP capabilities of Windows Mobile 6.1 on an XPERIA X1 phone and wonders why GPS doesn’t work anymore – here’s your solution.
1) If you’ve already done so and now have a dead GPS hard reset your phone. All your data will be lost.
2) Use christonge’s CAB for unlocking VoIP SIP on WM 6.1, which can be found here: http://forum.xda-developers.com/showthread.php?t=422038 (Thank you christonge, saved my day!!!)
3) Test if GPS now works with GPS Test tool http://handheld.softpedia.com/get/GPS/GPS-Test-34335.shtml
Good luck!!!
Keywords: dead GPS iGO8 XPERIA X1 SonyEricsson VoIP SIP Windows Media 6.1 unlock
No sound while calling through VoiP
christonge said:
I don´t have this problem and I use VOIP everyday.... so try my cab and let me know.
The only problem I have is the sound doesn´t come thru the internal speaker... but hey I´ve had this problem with Kaiser, Polaris and now Diamond so I´m used to it . The only device I had it working with the internal speaker was the Hermes.
Click to expand...
Click to collapse
Hi,
I have the problem, that I can't hear my partner, when I'm calling via VoiP.
I can dial normally, the phone of my partner rings, but I can't hear anything. The phone recognizes, that my partner picked up the phone and starts the clock. When I speak, my partner can hear me, but not in the other direction. I can't hear anything.
If I call my Voip-number, my diamond also doesn't ring.
Is there anything I forgot?
Thank you!!!
Hi mates! Excuse me for my bad english, i'm an italian boy and i havn't sudied english wery well when i was at school...
I have an HTC TyTN II with WM6.1 (Boid 19212.1.0.3).
I've tryed to install varoius voip and sip config tool cabs but after each install my gps goes dead.
After each install i must do an hard reset to return to have the gps running.
The cab in the first page solve the gps troubleshooting?
In alternative, there is a cab that permitt to use voip and gps?
I would use internet calling and i need to use gps.
I won't hardreset never again.
Thank to all...
hi my name is Branko. I have same problem with X1 and sip and GPS. I downloaded that .cab file but when I installed it, I couldnt find program on my phone. Can you tell me what should I do?
I bought blueangel and Im a complete n00b i must admit. Ok so i heard that i can upgrade wm and i would like to read complete step by step text about that + i need files files for that. Thanks in adv
btw can someone tell me how to setup wifi, my isp told me that i need to put ip in qtek... ????
and some1 pls tell me whats up whit led lights what does it means
ok, so ive read a little and now i have wm6 but I cant connect it to a active sync... whats up with that?
I have activesync 4.5 and cant connect, i have read all of possible solutions and i didnt solve the problem, is there some other program that could be in the same use???
is there some1 who can answer me???
Hi Sorry someone hasnt answered you
There could be lots of reasons why the device isnt synching - have you restarted the PC and the XDA?
When you put the PDA in the cradle what does the PC say does it detect the PDA at all? - It would help if you can tell us
1) what version of the WM 6 rom you have
2) exactly what device you have and what sort of cradle /cable you are using to synch
PS there are good people on here and given time you will get the help you need
Kind regards
John P
i found a problem in firewall!!! its working now, but do u know some good links for games programs and rest??
I found tons of them just by doing a google search.