I have just got my Vario III but am having problems setting it up to be used as a wireless (bluetooth) modem for my laptop computer. I am running Vista Ultimate and have not installed any driver software for the phone.
Can anyone please assist?
Wireless modem using Vista and TyTN II
First you should create a partnership between Vista and TYTN II. Then you run the Internet Sharing using Bluetooth and choose the "Connect To" menu at start menu and select connect to a Bluetooth PAN. You should see your mobile phone in the list. Just click connect. Boom !!! You're connected !
BT PAN
I can get Bluetooth Internet sharing to work on my AT&T device it is just a bit clumsier than by USB. With USB I just launch the Internet Sharing app on the Tilt and select PC Connection via USB. I then get an immediate 3G data connection on my laptop. Cool. As others have stated to tethering or extra data plans required.
To get this to work via Bluetooth I must do the above but select BT AND then connect the Network Access Point connection in my BT connections from the PC side. Isn't there some way to get this down to a single connection initiated solely from the Tilt side?
BTW: AT&T Tilt device and ROM, Toshiba BT stack, Windows XP SP2.
Related
has anyone tried internet connection sharing via HSPDA to a PC using activesync or bluetooth yet? any issues?
I use USB/ActiveSync and it works fine.
Just follow the manual. I followed it and got no problem.
One thing though, in the manual, it said "execute 3gnetopt.exe in the PC to optimize it for 3G connection".
It seems, after that it changed the routing automatically and can slow down your internet connection when not using the ICC via PDA.
Well, that's easy, just disable the "additional" network interface in the PC.
i could get the usb internet sharing to work but bluetooth internet sharing doesnt work. my pc is able to detect a local bluetooth pan network without internet access. anyone got their bluetooth/internet to work?
I have internet sharing working via bluetooth on a tablet and laptop (both running XP). First I tried DUN and it worked which suprised me. Then I set up a PAN connection and got Internet sharing running. After that DUN will no longer work, it looks like it trys but then fails. But Internet Sharing is faster and works fine over bluetooth.
It can be tedious at first, you need to create a BT PAN Connection on the PC, you need to create a BT partnership with the Kaiser in your Bluetooth manager on the PC. You need to set the Kaiser's Internet sharing to "Bluetooth PAN" and have the Network connection set to go to your ISP's GPRS internet AP.
Once I have PAN setup on the PC, it's showing "Network Cable Unplugged"
I then Start the Kaiser's Internet Sharing and press connect, it starts a GPRS connection.
I then open the Bluetooth Manager on the PC, select the Kaiser's Connection Icon, right click and select connect.
Then the two devices connect and I'm off and running.
With 3G I have been able to answer calls and talk on my Jawbone BT headset while still connected to the PC via BT as well, pretty much MAGIC
bluetooth still cant work with those instructions, i'll just stick to USB for now.
how do I ensure that HSPDA is working and its not just 3G?
My 3G icon changes to H when it connects hi-Speed. I'm wondering what Bluetooth Stack your PC has, I had issues with my tablet and Hermes until I got new BT Drivers from Fujitsu support. Your PC may need updated BT profiles? My laptop is Dell (uses a Toshiba BT Stack), the tablet is Fujitsu (also Toshiba BT Stack). Just a thought.
On the Plus side, using a USB cable will keep the phone charged, which is good because HSPDA is a power hog anyway.
i'm using a bluetooth dongle with my PC running vista
Both USB and BT ICS work great for me. I've used it on Edge, 3G, and HSDPA.
Both USB and BT ICS work great for me. I've used it on Edge
Internet sharing only working on 2G and not 3G
I am connected right now via internet sharing using my USB cable. However, this is working only if I have a 2G signal showing on my tytnII. When I am in a 3G location, the internet sharing program sits with the message "waiting for network"....this is just after the message "checking USB cable".
I have tried many things including a hard-reset, not having a full sync relationship between the PC, just connected etc. All to no avail.
I am using a new Dell laptop running Vista Ultimate.
Unlike previous PDAs I've had, I don't know a way to force the tytn II to stay on 2G, so when I am at work in a 3G environment, I cannot get internet sharing to work.
Help!
Anyone can help me to use bluetooth and internet with my desktop pc?
TYVM
Are you talking about using your TyTN II as a modem to connect to the internet through your PC?
If so, is your PC running XP or Vista? And is it wirelessly enabled or do you need a bluetooth dongle for your PC to recognise othe bluetooth devices?
Nopes, i mean in the past in my old palm tx with a bluetooth adaptor plug to my pc i use internet with a pan connection i think, that can be done with the tytn II?
To use device to connect : Just turn on Internet Connection SHaring on your device (selecting BT) and then connect to it as a BTPAN on pc
To use pc to shre web with device, just connect activesync over BT and the device can then use the pc's web connection.
Hi, where can i find "internet conection sharing"
using wm6
its internet sharing and you can find it on programs menu
Is there anyway to access internet on the HTC if you just have a PC connected to internet ?
using WM5 it's possible using active sync, but after i upgraded to WM6 it's not possible..
any clues ?
upgrade activsync
well....i downloaded the active sync from internet..
my IE on the desktop is using a proxy.. not sure if i need to configure something on the phone.
thanks for the reply
Is Active Sync required?
My nephew doesn't have AS installed (doesn't have a WM phone) and I wanted to be able to conect to the net without having to remember to taked an AS disk with me.
it's possible using wifi and routing the wifi from the pc to the isp
otherwise it's not possible
The only way how i know is whit bluetooth
Whenever I travel I take a bit of internet with me so I can use it in emergencies.
Another way to access the "computer's" internet over your phone is to use internet sharing from the laptop and create an ad hock wireless network between the laptop and the phone. That works great for me in places where there is no wireless but wired internet.
Check out this link if you would like to learn how to setup Ad Hoc Internet Sharing.
I can access the Internet whenever I have the HTC connected through my PC via USB and ActivSync.
Accessing the internet normally engages the GPRS data path, but with the USB to the PC (assuming the PC is connected to the 'net) it connects without engaging GPRS and routes through the PC.
It works on Vista and XP without any problems.
Another neat trick is using the HTC to allow me to access the Internet from my laptop when I'm away from the Office i.e. HTC -> USB -> Laptop -> IE Browser -> Internet. By using 'Internet Sharing' in programs folder.
Don't you just love technology !
this is what u need
http://www.wmwifirouter.com/
and check this thread as well
http://forum.xda-developers.com/showthread.php?t=357152
I'm trying to set my laptop up to use the td2 to get a connection to the internet. can this be done either via bluetooth wiFi or USB. I have tried to add a bluetooth network connection but the laptop keeps giving an error saying could not connect to the remote device.
When I plug mine into my laptop via USB, I get an option on the device to 'internet share'. Does this not happen for you? I'm not sure whether Windows Mobile Device Center is also needed, but it may be!
I did this today using a Macbook. The USB did not work on the Mac but Bluetooth did. I had to connect to the phone from the computer using ordinary bluetooth first (without network). Then I had to choose Internet Connection on the phone using Bluetooth PAN - which I assume is Bluetooth network. Also had to select Bluetooth PAN on Macbook - was a bit fiddly but it worked. Anyway it does work with USB on the PC see post 16 of the thread here.
cheers both, i will check out the other thread but when I connect the phone via USB to this (work) laptop, I get nothing. My home one uses Vista and Mobile Device Centre, but my work one uses XP.
typically, after a reboot the phone gives of the option to shart internet sharing but the laptop wants to install a rndis connection, but the only way to do this is connect to internet. ironic.
Ok, finally have a proper Interenet connection and downloaded Activesync 4.5 from MS. This looks like it will resolve the situation.
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Not sure that Internet Connection sharing in WinMo supports that...just wondering, why the heck would you want to surf the web on a 2.8" screen when you have a full PC available to you?
You can use the remote desktop facility via wifi. But as previously posted... why?! Bluetooth doesn't support a high enough datarate for it to work properly.
Connection at my location is 3G at best so bluetooth is defininitaly fast enough to accomidate my needs just simple stuff.
metalman0581 said:
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Click to expand...
Click to collapse
The best way to get the connection on your kaiser throught the pc is when you connect it using the USB and being connected to the active sync on your pc besides there are no settings need to be made for using this way. I'm not sure if you can connect the kaiser to you active sync on the pc through the bluetooth.anyway let me try it and if anything pops up, i'll let you know
Nope, no additional software required. Just go into Start - Programs - Internet Sharing. Hit connect and connect up your USB cable and you're done.
_Wait for ActiveSync to connect and then exit the programme._________________
Max confusion
What a jumble this thread has become . The O/P wanted to access the internet that's already on his PC and channel that through his TyTN II - NOT the other way around. As already mentioned in one post, one way of getting this is via an Activesync (or WMDC if it's Vista or Win 7 on the PC) connection. For greatest speed this would be via the USB cable but it is possible to have an Activesync or WMDC connection via Bluetooth for greater mobility if there's a need to carry the phone up to 10 m from the bluetooth hub. The other (more straight forward) way to do this is just to connect the phone via WiFi directly to the landline/broadband router (assuming there is a WiFi capable router avail).
Internet connection sharing is only for when the phones internet connection eg GSM/3G or HSDPA is feed to a desktop PC (say if the landline/broadband connection is down). In the O/Ps second post, the reference to Bluetooth speeds made it look like this was what was being saught.
I have done all of these with my TyTN II and had things working well in each case.