hey,
i was in the process of flashing to the htc rom, when for some reason activesync disconnected and i got an error message in the program??!!! now my phone is stuck on that rainbow colored screen... what should i do?? thanks
omar
took out the battery and turned it back on and its back to normal, scared the hell out of me... but why the hell would the activesync connection just quit all of a sudden??? now i'm scared to try it again..
helps if you tell people what version of phone you are using. SEARCH is a great feature too.
here's a fun link. http://forum.xda-developers.com/showthread.php?t=334679
although i bet you'd really love SSPL ;-)
i followed those instructions and my phone is cid unlocked...
Related
ok so ive discovered i didnt brick my phone..i did a reset and now its on the tri-color boot loader menu...i plugged it into my usb and it says usb down on the bottom left...now i wanna install a different rom...i was thinking about the basic t-mobile one from their website because i just want my phone to work again my front buttons dont work with this rom ive installed from one of you guys on this forum...it runs pretty slow for being the kinda phone it is( my old non-updated rom ran faster) so what are some suggestions for me to do? Currently my phone is in front of me ready for anything you guys can tell me to do...oh yea and when i tried installing a rom from exlencin or whoever and it is acting like theres nothing connected when its trying the first part of the installation on a windows command processor screen...so what im getting at is im ready to try anything at this point because i went from my trusty wizard to a ****ty old motorola flip phone and i take it most of you guys have some type of phone like the wizard or the wizard itself so you all know how im feeling about the downgrade!!! Thanks in advance to anyone who is willing to help me with my problems i know i sound like a noob
http://forum.xda-developers.com/showthread.php?t=285435
and put molskii/faria aku3 rom on it after u did the whole procedure
and check for wisbar 2
and dont forget to hard-reset it when ur at the part of having this t-mobile usa 2.26 rom on it incl bootloaders and stuff which are ipl&spl 2.26
Alright i need a bit of help here people...
i attempted to flash my xda mini s with faria's REAL THING WM6 rom, followed instructions, it went up till 99%, i was a good boy and i didn't touch anything, then the screen said there was a problem with installing
it took me through a recovery process but it didn't really work
now my phone is stuck in the rainbow screen, i tried to flash it again anyway but it won't work, sez there is a ERROR 300 or something.
my phone is a IPL2.21, SPL 2.21 so i assume it's a G3?
i have already read thru the forums and its not of much help...
please please help me.
(semi-newbie)
Read the suggestions here http://forum.xda-developers.com/showthread.php?t=303065
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
wr450f said:
Hello.
I am new here and I have to say, that I have to manage a big problem.
Whats happend?
A few days ago I get an Vodafone branded Kaiser and yesterday I tried to falsh a new unbranded ROM. So downloaded the HardSPL Tool an the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship ROM.
I have connected the Phone via ActiveSync and installed HardSPL first.
Everythings looks fine and I started flashing the new ROM.
While the flashing process was during my PC crashed and the flashing process has been interrupted.
I have started the phone and the PC again but the phone was locked since then.
When I start the phone I get only a screen divided into four colors (red, green, blue and white) without any function.
In the red field I can read
KAIS130
SPL-1.56.0000
CPLD-8
The phone has since no function. I can#t switch it off an I can't use any of the buttons.
If I try to connect the phone with my PC for re-flashing the ROM ActiveSync does connect to the phone and would not be green highlighted.
What I should I do? Who can help me solving this problem?
Many thanks to all, who are willing to help me.
Click to expand...
Click to collapse
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Another thread regarding the problem:
http://forum.xda-developers.com/showthread.php?t=354553
Mikulec said:
Go to kaiser rom development and read the first thread there. There should be topis about bad flash.
I think this is about bad flash too:
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
wr450f said:
You are the GREATEST. Thanks a lot. It works again.
I'll pray for you when I go to bed.
Click to expand...
Click to collapse
I am glad to help u and welcome to xda.
PS: MY post no. 500
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
hey guys, few days back i strung the courage torgether to flash rom.
everything was going well till i noticed that my xperia was updating the rom and seemed to take forever to load the rom.
at present it switches itself on and off and says continuing to update rom and then a white screen with blue text says loading.
I need to find a solution to this as if i tell my dad that the device is cooked im in deep, and i also do not have insurance of which was a dull thing.
so please any suggestions and tips whould be much appriciated ty. x
I am no expert. But have you HardSPL your phone before flashing the ROM? That is a requirement.
For the current prob, I can imagine taking out your SDcard (if you are using card method) should stop it from reading the image. You prob have to hard reset the device for it to boot properly.
hey thanks for reply,
Iv tried removing the sd card but to no evail, when i do this the xperia is stuck at the bootload mode and says continuing to update rom, my battery has drained so i cnt switch the phone on, it has to be dne when on the charger.
and a hard rest does nt work.
Did you HardSPL? If not, you will need to do that first.
Anyway found few threads on it.
http://forum.xda-developers.com/showthread.php?t=540459
http://forum.xda-developers.com/showthread.php?t=455553
yes sorry i didnt metion, yer i did hardspl, and i just tried hard restting and nothing happend the screen stayed on bootload and then few seconds later went to loading please wait . . . ?,