Database Develop

I stepped on my Tilt! do you think its just the LCD? (See pic)

So my tilt fell off my clip while I was out in the yard and before I realized it, I had walked all over it. Everything seems to function but the LCD colors area all jacked up. It is faded (mostly white), funky colored, and hard to see what is going on. Attached is a picture of it. Do you think it is just the LCD? (I can replace that for 70 bucks from blackberry8100parts.com). Or do you think I've killed something else?
Any advice would be fantastic before I waste 70 bucks getting a new LCD.
Thanks,
Alan

I just want to know what kind of clip you had?

knytphal said:
I just want to know what kind of clip you had?
Click to expand...
Click to collapse
It was seidio's holster. I really like it but it is def easy to knock the tilt out of it.

If you are willing to open the tilt up to replace a broken LCD then I would go ahead and open it NOW and see if you find other damage. You are looking for anything cracked. There are manuals for the unit in the wiki. If you haven't cracked anything else then your probably ok but the only real test is to buy and LCD and try it out. I assume that slide action of the keyboard tray is as it was before you stepped on it? It it anyway stiff or off? Does it tilt up the same way and with as much ease as before?

Everything seems to slide and tilt up without a problem. There is no looseness, friction, resistance, etc.
I have read through instructions on how to take it apart. Only thing is that I'm going to get a new LCD, I need to use the phone till I get it It is usable, just a bit tricky ;-) I'm a bit nervous taking a part twice. I also don't have the right tools which would come with the LCD.
Guess I'm just going to have to buy the LCD. I can always resell it if need be.
Alan

Maybe try and open it up to see if you have a loose connector because that color thing is weird. Usually you would have a crack on the screen and you would see the crack but instead you seem to be missing some colors which leads me to think that the connector might have become unseated a little.

Any update on this? Something happened to my tilt last night and it's doing the same thing!

Probably just the LCD but it might just be a loose flat multi connector. If there's no warranty then as suggested above you could dismantle just to be sure you do actually need a new LCD. In the worst case scenario you could find that compnents on the d/pad daughter board are damaged. You can only really tell by internal inspection.
Mike

I went ahead and purchased a new LCD from fonlogix figuring I could always keep the LCD as a just in case or even resell it. It was suppose to have come with the t5 torx driver and the case opener but the case opener wasn't in the package. I emailed them and they said they were out and didn't want to hold the shipment. They are suppose to be sending me one though. I would rather not try dismantling without it because I don't want to risk anything (nor do I want to try with my finger nails). I'm hoping to receive the tool very soon so when I do and I get it dismantled, I'll post back.

I think just maybe the ribbon cable that connects the LCD to the mobo has come lose.
I know on my Hermes, this was located under the center buttoin, and when I would press it hard enough it would make a secure connection, and it would display normal color quality, and when I let go it would become like a 2bit color quality

Fixed! I went ahead and replaced the LCD and now it works. I examined all connections as best I could as I went along and didn't find any loose ones so I'm not for sure if it really was a loose connection or a broken LCD. Regardless, I'm not going to take it apart again to find out! I'll keep my old LCD as a backup and if it becomes necessary, test it out
Thanks!
Alan

in the future you could use a program like my mobiler I have attached it to check out your tilt that is what I did when the screen broke you can view your tilt on your pc with out the screen

you should post a video on how easy it is for the tilt to come out of the seidio holster... i was actually thinking about getting it.... but i play a lot of sports so if it would knock out easily then it wouldnt really be good for me.

The problem with the seidio holster is that it is open at the top on the sides. Thus, if you or something hits or puts pressure from the side at the top of the tilt (where the power, ptt, and ok buttons along with the wheel are), it pops out of the case.

Tilt LCD Replacement Video
www.blackberry8100parts.com
now has Tilt LCD Video replacement instructions in High Definition.
check it out

belize2004 said:
www.blackberry8100parts.com
now has Tilt LCD Video replacement instructions in High Definition.
check it out
Click to expand...
Click to collapse
Thanks for the link. Did anyone download the plugin? I'm getting tired of all these diffent plugins, they will slow your system down over time.

Moving couch = Broken Tilt

I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks

well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.

brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya

pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?

This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.

I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.

Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.

brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !

pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$

brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help

Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.

congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"

brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it

I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.

When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...

DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.

I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together

kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????

Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF

here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot

[Q] Screen Problem-Anyone Seen This??????

I bought the Pure in November. Since then its been in a case 100% of the time, NO drops, NO water damage. Last week it developed the "spot" shown on the picture. It looks like a thumbprint, almost. Its unlocked, hard spl'ed, and was running a custom ROM but I reflashed to stock ROM in desperation. I am just stumped and more than a little ticked off-I mean I bought it unsubsidized and it crapped out quicker than my husbands $20.00 Nokia. The touchscreen does function normally though. I contacted HTC, who told me to contact AT&T. I'm guess I'm trying to figure out if its worth trying to replace the digitizer or just sell it to gazelle.com for the 50 bucks they offered. Thanks for any help you can offer.

Hello, I've had this problem on my diamond2, I took it to my operator and they program from replacing the front panel, the problem is that the digitizer glued to the screen. Good luck and I hope I have helped!

Thank you, that does help! I'll call AT&T now.

I had the same problem just sent it into ATT to get fixed.

Screen Problem
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....

Hardstarburst said:
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....
Click to expand...
Click to collapse
Search for newton rings, you may be able to fix it by applying duct tape and trying to separate the layers.
Otherwise you will find digitizer replacement instructions if you search here.

its same to meee
how to fix it

I had this problem before, after my phone had a 1 feet fall to the ground. Surprisingly, it slowly went away. After a few days, it's totally gone! Lucky me!

Hardstarburst said:
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....
Click to expand...
Click to collapse
That's LCD internal bleeding, fixed a few with that issue.
LCD is simple to replace & the digitizer is a little harder as it is bonded to the front casing.
The LCD % digitizer are totally separate & are not bonded as some people suggest.
The Diamond 2 is one of the easiest HTC devices to dismantle which is fortunate as the quality of LCD & digitizers mean you need to dismantle them frequently.

witch1 said:
I bought the Pure in November. Since then its been in a case 100% of the time, NO drops, NO water damage. Last week it developed the "spot" shown on the picture. It looks like a thumbprint, almost. Its unlocked, hard spl'ed, and was running a custom ROM but I reflashed to stock ROM in desperation. I am just stumped and more than a little ticked off-I mean I bought it unsubsidized and it crapped out quicker than my husbands $20.00 Nokia. The touchscreen does function normally though. I contacted HTC, who told me to contact AT&T. I'm guess I'm trying to figure out if its worth trying to replace the digitizer or just sell it to gazelle.com for the 50 bucks they offered. Thanks for any help you can offer.
Click to expand...
Click to collapse
this is definitely the digitiser problem. I have the same problem for almost one year, but i manneget to overcome it with the solution i have discribed here:
http://forum.xda-developers.com/showpost.php?p=5496201&postcount=78
i do not exactly what it is and why does it happening. but you can order a new digitiser from ebay for 5-10 USD and install it by your self, of course if your have applied for waranty repair already and they have refused to you.

Mister B said:
That's LCD internal bleeding, fixed a few with that issue.
LCD is simple to replace & the digitizer is a little harder as it is bonded to the front casing.
The LCD % digitizer are totally separate & are not bonded as some people suggest.
The Diamond 2 is one of the easiest HTC devices to dismantle which is fortunate as the quality of LCD & digitizers mean you need to dismantle them frequently.
Click to expand...
Click to collapse
Mister b, did you say you fixed a few of the ATT HTC Pure with this issue?? It seems fairly straightforward to replace, all except for the lower portion of the case. I can take the screws out of the top and I see how it comes apart, but it is still somehow attached at the bottom and I have pulled as hard as I dare. This phone is my "daily driver" I can't destroy it in an attempt to fix it. Any idea where I can get a take-apart manual or vid for the Pure, or do you know how the bottom portion attaches?

Hardstarburst said:
Mister b, did you say you fixed a few of the ATT HTC Pure with this issue?? It seems fairly straightforward to replace, all except for the lower portion of the case. I can take the screws out of the top and I see how it comes apart, but it is still somehow attached at the bottom and I have pulled as hard as I dare. This phone is my "daily driver" I can't destroy it in an attempt to fix it. Any idea where I can get a take-apart manual or vid for the Pure, or do you know how the bottom portion attaches?
Click to expand...
Click to collapse
I think on your model mentioned 2 lower screws are hidden under removable trim panel under buttons !
Youtube for a dismantling guide or look in wiki section.

[Q] Screen Cracked [Question(s) on how to fix it]

Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
So I immediately began looking for a solution and repair shops said 300$ to fix when I purchased my phone for just a little over 300$. So that is out of the question, unless its truely my last resort. So I began looking on how to fix it, youtube failed me the only thing that was helpful were the breakdown videos of the HTC One teaching me how to take apart the phone (The only part I was interested in was on taking out the glass).
The only solution I currently can think of would to repair it myself. So here are my questions.
1) The screen is cracked only, the touch screen works fine etc.. so can someone show me the listing on ebay/amazing (I prefer amazon) of the kit or things I would need to fix it.
I Saw this one:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
Because it looks like exactly what I Need, BUT I'm no expert so would that fix my problem? Or is it the wrong thing since all I need is the glass and thats the "Digitizer Outter Glass" or something? I dont know my terms that well but to me it seems like what I need because its the "Outter Glass" haha.
But I'm confused about that because it says Digitizer outter glass and in the picture has the connection cord thing, Would this be replacing every part having to deal with the screen? (i.e I take a suction cup and take out the screen, and unplug the connection from the phone to the screen, would what I having in my phone (cracked screen with cord..) be the same thing as what Ill be ordering from that amazon thing but NOT cracked?)
-----------
2) How would I replace it step by step? I already seen videos of taking the phone apart and replacing iPhone screens but I havent seen any towards the HTC One in regards to replacing the screen. So would someone mind pointing me in the right direction, or giving me a text tutorial on what to do? I can pretty much figure it out by reading it since I have videos n pictures to compare it to sorta.
-----------
3) I never done a repair before but it doesnt seem that hard, just have to be gentle and know what youre doing (Thus why im asking so many questions), is this my best option? Or what should I do...
-----------
4) When I seen videos regarding the iPhone screen replacement it was showing things like Screen Seal / and him literally taking off the glass from the this other thing and replacing just the glass itself instead of the thing below it.
Would I have to also use a type of screen seal / or have to take glass off like you would do in the iPhone or is it a 100% different conecpt / idea?
----------
Remember: I basically need to know what I need to fix the cracked screen of my phone, I think this is what i need:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
So if it is, then may someone tell me how to replace my phones cracked screen using that and explain it to me what im actually doing and watch each part is etc.. (like what im buying and whats cracked with my phone, so I know its what I need)
and if not, can someone tell me what I need and how to do it?
PS I understand I cant post outside links, but its amazon and Im not trying to advertise i just need the link as a comparison / example

This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Edit: In your original post, you wrote that you had watched videos on the Iphone. Since this is a different phone with differences in assembly, I suggested a video concerning this specific phone. Not trying to be rude, but if I was taking apart my HTC, I would view specific videos concerning my phone. I thought that the specific video might give you clues as to the parts involved in assembly and what procedures were necessary. The video I was referring to concerned their taking apart an HTC One. Every bit of information might be helpful to you trying to fix your problem.

Wolf said:
This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Click to expand...
Click to collapse
Not being rude but I'm pretty sure I already stated the fact that I seen the videos and tutorials regarding the tear down of the phone. So how do you expect that to "maybe" help me out? If I'm trying ti find out the part(s) I need to replace since I don't know the full termology.
I know how to take my phone apart (For the most part), I Just need to know mainly what I need to replace to fix my cracked screen, or whats my best solution. + The questions i stated in the thread.
Thank you.

Unfortunately you will have to change the whole screen assembly.
This will cost you a little ... http://www.etradesupply.com/oem-htc...itizer-assembly-with-front-housing-white.html
You could try also just the LCD+ digitizer (if the front aluminum parts are still intact: http://www.etradesupply.com/oem-htc-one-lcd-screen-and-digitizer-assembly.html
If you scratched the back of the phone, those guys have the back assembly also ... about 24 USD ... ( http://www.etradesupply.com/oem-htc-one-rear-housing.html )
You could TRY replacing only the digitizer ( http://www.etradesupply.com/oem-htc-one-digitizer-touch-screen.html ) but I would not go there. In between the digitizer (what is actually cracked in your case) and the lcd there is a special "jelly" glue which is VERY hard to remove w/o breaking the LCD. I tried that on a N7 and now I'm waiting for a new LCD to be delivered ...
Good luck!

Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)

JohnVerde said:
Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)
Click to expand...
Click to collapse
Let us know how it went. :good:

Not sure if it's worth it. HTC will fix it for you somewhere around $180.
Sent from my HTC One using xda app-developers app

JohnVerde said:
Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
Click to expand...
Click to collapse
Hi,
I posted a lengthy thread on how to do a repair here
http://forum.xda-developers.com/showthread.php?t=2387992
Did it well over a month ago and it is still running fine.

You might want to call you household insurance, and tell them someone in your household (not you) dropped the phone while cleaning for example.
Here in the Netherlands, they will pay the repair even the same day.
I didn't had to send them anything, just tell them on the phone how much the reparations would cost, and they transfered the complete numeber right away!
Too bad I found that out after spending more than $100,- on phone reparations.
It might be worth the shot, since they may reimburse it for you.

[Q] Guide: Xperia V disassembly, how to repair broken display?

Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube, but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!

Display removal
grisu59964 said:
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...

display is connected to body with really strong glue. Remember that it is impossible to remove old display without breaking it. Second thing is that with new display the phone most likely will not be waterproof

hakanW said:
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
Click to expand...
Click to collapse
Hi! I broke mine last night. How did your repair go when the part arrived? I also could only find the russian video without the screen being removed
How hot did you have to make the screen? I was thinking of using an iron with a cloth around it.

Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?

canuck82 said:
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
Click to expand...
Click to collapse
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.

Daryl_tt said:
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Click to expand...
Click to collapse
I just ordered this: http://www.parts4repair.com/complete-screen-assembly-for-sony-xperia-v-lt25i/ I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...

Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.

Update
Daryl_tt said:
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Click to expand...
Click to collapse
I replaced the screen - had it working for two days and dropped it again - cracked screen, doesn't even light up.
I now have another replacement screen and a better case - at least now I'm getting quicker at taking the phone apart....

screen help
canuck82 said:
I just ordered this: I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Click to expand...
Click to collapse
Hi this wont work, I went through the exact same issue, and its impossible to attach the new screen properly. your best bet is to try and find a second hand screen via ebay. it has to have the "housing part with it. otherwise you are wasting your time. it cost me so much to fix mine as I ordered two screens in the end I could have bought a new phone on special....
Try Ebay, and make sure you see the one with the screen and front housing on, I am unable to port the correct link on here as I haven't made 10 posts yet.
Search for the following on ebay : Genuine Sony Ericsson Xperia V LT25i front+digitizer touch screen+LCD display
This should let you find the correct screen
Look at the picture you will see the side housing for the front is also installed, the one you have ordered is the incorrect one as its only the LCD and the Digitzer, without the front housing that it gets "glued" onto. You can see the main difference where the earpiece is its shown as black, hence the mesh is there. that would be the correct one to order. Unless you have the means of getting yours glued back on the same way as the factory, I see you will struggle to get it done otherwise.