Related
Okay. I completed the following steps on my new Cingular 8125
1. Used Loki .2b to do CID and unlock - Don;t have another SIM to test but seemed to work
2. INstalled Cingular_RUU_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST
3. Installed the 2.25 radio from kypher (sp) update.
Everything seems to work great and response times seem stellar so far but I do have a few questions...
A. When I go into Remove programs I see the following programs
FdcSoft PPC ContactsMgr
ammar Wireless Today Plugin
Summ Summ
What are these, what are they for and can they be deleted since I don't seem to find matching entries in programs for them?
B. Under Programs there are three called Clock200 240 and 252. I am guessing these are overclockers but clicking on them does not seem to do anything. How do these work?
C. Should I delete the cab file I x-fered over for the Loki unlock?
D. While some of the sound files that came on the ROM are cool, I would like to get rid of most of them. How do I do this?
General questions
Is there a profiles setting where for example I can choose a sleep profile so that the phone rings but e-mails don't do anything or is this a 3rd party app deal?
Has anyone ever had issues with having two different IP addresses for your exchange server? It seems that when I put in the IP address into Active Sync that I use to get Outlook Web my phone connects fine when out and around but when using USB errors out. If I put in the exchange server name my IT guy gave me I get the opposite. He is kind of helpless and clueless so any help here owuld be greatly appreciated.
I can help a little, The wireless today plugin is the one that appears on the today screen showing wifi on off and bluetooth on and off. The clocks are overclockers and they dont show anything happening but it does overclock your phone. Sorry I can answer the rest but hopefully what I have said helps some.
Hey every bit helps, thanks!
dcdivenut said:
A. When I go into Remove programs I see the following programs
FdcSoft PPC ContactsMgr
ammar Wireless Today Plugin
Summ Summ
Click to expand...
Click to collapse
FdcSoft PPC ContactMgr is a replacement on the contacts of the phone - less buggy than the stock one, and no - don't remove it.
Summ Summ - is the alternative task manager that you see in programs. If you wish, delete that one. Personally I like it, because when you close it, it actually closes.
dcdivenut said:
B. Under Programs there are three called Clock200 240 and 252. I am guessing these are overclockers but clicking on them does not seem to do anything. How do these work?
Click to expand...
Click to collapse
They are overclockers, and yes they do work, but generally there's an omap that you run in conjunction with other programs. There's an omap.exe file that you can re-do on shortcuts that will have a manual clock setting on simply just the program itself, but I'd find the thread that discusses omap overclocking.
dcdivenut said:
C. Should I delete the cab file I x-fered over for the Loki unlock?
Click to expand...
Click to collapse
Leave it...
dcdivenut said:
D. While some of the sound files that came on the ROM are cool, I would like to get rid of most of them. How do I do this?
Click to expand...
Click to collapse
Not sure you can delete some of them, because they're taking up ROM space, but not other memory. Check windows\ringers and see if they're in there and deletable.
dcdivenut said:
General questions
Is there a profiles setting where for example I can choose a sleep profile so that the phone rings but e-mails don't do anything or is this a 3rd party app deal?
Click to expand...
Click to collapse
Can't really say I can help with this one, but from my experience with the phone, there's nothing in it that has different profiles other than just ring, vibrate, and sleep. Try looking for some third party aps.
dcdivenut said:
Has anyone ever had issues with having two different IP addresses for your exchange server? It seems that when I put in the IP address into Active Sync that I use to get Outlook Web my phone connects fine when out and around but when using USB errors out. If I put in the exchange server name my IT guy gave me I get the opposite. He is kind of helpless and clueless so any help here owuld be greatly appreciated.
Click to expand...
Click to collapse
Can't help with Exchange setups, haven't touched them in forever =)
Hope some of this helped.
THanks a bunch Brian....
I have noticed a few things.. I seem to be getting the error where the time zone drifts. In my case it tries to put me in Indiana. Was there an easy/common fix for this.
Also, it seems to not hold a wifi signal very well anymore. Is this the problem you were experiencing. I installed Wififofum2 but did not get much time to play with it, but in the time I did could not get it to pick up a network at all.
I'm having wifi issues as well with a belkin pre-n, and my srx router doesn't hold its session and ip info.
The fix has been that summiter release a test2 rom, which I'm about to flash my unit with. There is also discussion of trying to get a seperate thread on radio roms which i believe deals with wifi as well, and you don't have to re-flash your entire os just to get a new radio rom.
Also, here are the images you may be interested in:
http://www.legolascs.com/images/wizard/upgrade_aku2.3/
Thanks again Brian
dcdivenut said:
Thanks again Brian
Click to expand...
Click to collapse
no problem man. as I type this message from the fresh test2 rom that summiter updated the gsm radio with, I'm finding that it is staying connected to my srx, and on the middle performance setting. what I am also noticing is my reception here in my room, dear god, I use to get to bars being lucky, but now man, jesus, full bars, its amazing. I do notice the reception does jump up and down a lot more but that's fine with me. overall the radio version in test2 seems to rock my sox. we'll see if it holds out for this really long post.
well scratch that on the wifi problem, had to reconnect to my router again... ugh, but better reception for cellular!
mengesb said:
FdcSoft PPC ContactMgr is a replacement on the contacts of the phone - less buggy than the stock one, and no - don't remove it.
Click to expand...
Click to collapse
I will have to disagree with that. The PPCContactMgr caused scrolling problems with my contacts, and I wasn't the only one this happened to. For example, if you hold down the D-Pad in while in contacts, it scrolls the the alphabet in very large letters allowing you to stop easily at a certain letter. This program screwed that up for me. It worked OK if I just scrolled through a few letters, like to "D", but if I scrolled all the way to "T" for example, then selected a name, it would throw me back at a random name much earlier in the list.
Removing this program fixed the problem.
The only thing this program really gives you is the ability to "select all contacts", if you wanted to delete them. It's not worth the problems. I'd remove it.
I did search first, and my problem isn't the normal "multiple alarms at one time"...The reminders are going off like they should AND at the time of appt (not normal). Anyone encounter this? Is that a system setting I accidentally changed?
Things I've done lately:
- Loaded Kaiser Tweaks, made some recommended changes.
- Loaded the Tilt Cab for SPB Mobile Shell (enables themes to work).
- Some appt. times were off an hour, so changed time zone back and forth.
- Loaded Chartcross GPS Test
- Loaded then removed the HTC Keyboard/Dialer Cab
I do us MemMaid all the time and remove duplicated entries...
I don't know if this is the reason for your issue, but Windows Mobile by default is suppose to play a reminder X min/hours before the start time (whatever you set) and then if you DO NOT "Dismiss" that reminder it will play again at the start time of the appointment.
Are you maybe not dismissing the first reminder?
Thanks for the reply - Yes, I am. I even made a Test Appt - for 10am, with a reminder of 15 minutes. It went off at 945am...I dismissed...all was quiet until 10am.
happens to me too
I have a tilt, and I'm running the latest tilt unreleased official rom from the upgrading forum here.
ROM Version: ATT rom aku 0.4.4 build 18128
Radio: 1.27.14.09
Same exact thing happens to me. This was also happening with the rom that came on the tilt originally. when I dismiss an appt, I get a notification at the time it is supposed to happen too.
I checked under notifications after dismissing one, and I did not see the appt. in the list. I did see "enrollnot" at the appt. time, but that was it.
I haven't looked too much through the registry for a switch to turn this off, but it is pretty annoying.
This is happening to me too. It's not really a big problem for me even though I use my appointments constantly for work. It's just a minor annoyance. A fix would be nice though.
Then I guess this behavior is normal now, and I didn't necessarily screw something up. Having used a WM device since 2001, I just never encountered that - and I just got the Tilt this week and assumed it was me since I couldn't find any forums reporting the "problem".
Thanks for the replies, and I agree - it would be nice to have a setting to allow this "feature" or turn it off.
This is especially annoying for birthday reminders. I have them set to remind me 7 hours before (i.e. 5pm the night before). Problem is that even though I dismiss the reminder, I get woken up at 12am since these are all day events. Ugghhh...
Happens to me too.
emmett said:
This is especially annoying for birthday reminders. I have them set to remind me 7 hours before (i.e. 5pm the night before). Problem is that even though I dismiss the reminder, I get woken up at 12am since these are all day events. Ugghhh...
Click to expand...
Click to collapse
I have the same exact problem!
mine too and I'm using the original AT&T ROM...
Unless this is a new feature to WM6, I've never seen this happen on any other version of WM.
For those of you having this issue, do you have the following software running:
AlarmPal
AlarmToday
PhoneAlarm
or some other calendar or reminder enhancement app such as SPB Pocket Plus w/ Repeating Alarams addon installed?
smittyofdhs said:
For those of you having this issue, do you have the following software running:
AlarmPal
AlarmToday
PhoneAlarm
or some other calendar or reminder enhancement app such as SPB Pocket Plus w/ Repeating Alarams addon installed?
Click to expand...
Click to collapse
I am experiencing the same thing, and I don't have any of the mentioned apps running. Nothing more than the built-in calendar and tasks, actually.
FIXED on my tilt
I compared the registry entries for the calendar between my tilt and 8525. I found some differences between them, and modified the tilt registry settings. this problem has now gone away for me. I think it was because of one of these bits under DEFAULTS in this key, but you never know.....
Here's what I changed:
old tilt with repeated reminders at appointment time:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar\Reminder]
"DEFAULTS"=hex:1e,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,04,00,00,00,00,\
00,00,00,00,00,00,00,a0,44,03,00,00,00,00,00,00,00,00,00
"WAVEFILE"=""
new tilt today that does not repeat reminders:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar\Reminder]
"DEFAULTS"=hex:1e,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,04,00,00,00,00,\
00,00,00,00,00,00,00,60,72,04,00,00,00,00,00,00,00,00,00
"WAVEFILE"=""
maybe someone with access to the WM6 manuals has the decode for this key.
wwwes said:
I compared the registry entries for the calendar between my tilt and 8525. I found some differences between them, and modified the tilt registry settings. this problem has now gone away for me. I think it was because of one of these bits under DEFAULTS in this key, but you never know.....
Here's what I changed:
old tilt with repeated reminders at appointment time:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar\Reminder]
"DEFAULTS"=hex:1e,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,04,00,00,00,00,\
00,00,00,00,00,00,00,a0,44,03,00,00,00,00,00,00,00,00,00
"WAVEFILE"=""
new tilt today that does not repeat reminders:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar\Reminder]
"DEFAULTS"=hex:1e,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,04,00,00,00,00,\
00,00,00,00,00,00,00,60,72,04,00,00,00,00,00,00,00,00,00
"WAVEFILE"=""
maybe someone with access to the WM6 manuals has the decode for this key.
Click to expand...
Click to collapse
FYI.... make sure to use the CODE tags when adding registry entries. Look carefully and you will find extra spaces in your post above. If someone were to copy/paste that code, they would get the extra spaces making the key not work properly. By adding the code tags, this won't happen.
HMMMM....fixed? maybe, maybe not
I think I had this happen again today, after a few days of no repeats I got one today. Not sure if this fixed it or not. YMMV.
I'm going to let it simmer a few more days and see if it was a fluke, or if it really didn't fix the issue.
I think it's a WM bug because mine will do this off and on. I've never really noticed it until this thread was started but I've kept my eye on it and I get one that's multiple one time, then the next notification won't be. No ryhme or reason to it.
I agree, seems to be sporadic.
I'm on the stock AT&T 1.60 Tilt ROM and thought this was consistantly happening for me. So yesterday, rather than doing the Snooze for 15 mins, I just hit dismiss. 30 mins later I realized it never went off again and I missed my meeting . So yeah, it doesn't seem to consistent...
A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
mavado said:
This solution helped for me:
The problem was in the registry of QuickGPS.
I changed the region settings of my PPC to Dutch, but QuickGPS doesn’t get this settings. So I assume it’s downloading the wrong GPS information.
After I changed the following registry setting I had a fix almost immediately :
[HKLM] - Software\HTC\QuickGPS\region changed from -- to NL
After using GPS Test I got a fix very fast.
Using:
Kaiser
OS DCS 1.4 WM6.1
R 1.64.06.04
Click to expand...
Click to collapse
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
spaanplaat said:
A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
Click to expand...
Click to collapse
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
XML file
kjb86 said:
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
Click to expand...
Click to collapse
Then I will look into the kaisertweak’s XML file and try to remove the QuickGPS settings and see if it works. Will keep you guys updated.
edit: Okay, this does not make any difference. So we have to find a way to set the user setting on every wake-up or boot. Does anyone know how to do this?
edit: Thought I had the answer, turns out... I didn't
spaanplaat said:
edit: Thought I had the answer, turns out... I didn't
Click to expand...
Click to collapse
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
kjb86 said:
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
Click to expand...
Click to collapse
No I found that answer using search, but doen't work with kaiser
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
_Alex_ said:
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
Click to expand...
Click to collapse
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
I'm using the standard ATT ROM and the wierd thing for me is that I used the GSP (TomTom) on Tuesday with no issues. I tried to use it today and am unable to connect at all to the GPS via TomTom, Google Maps, or QuickGPS.
kjb86 said:
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
Click to expand...
Click to collapse
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
_Alex_ said:
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
Click to expand...
Click to collapse
ahhh
No, still did not work. But thanks for trying, and yea that task manager shows a lot of programs that you can't see running
If you use Alexs kitchen, i think you can edit the Rgu file under region to reflex where you are and cook the package back into your rom and it would always reflex the region you choose?
I've not tested it, but would a MortScript in the startup folder not do the job?
I made a little MortScript and added it to startup:
Code:
While (1)
Sleep (60000)
If NOT regKeyEqualsString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
RegWriteString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
EndIf
EndWhile
This works and keeps the "SE"-setting (for Sweden), but having the script running constantly isn't exactly optimal as it uses processing power and thus adding to battery-drain. Anyone have any ideas on a different way of making the script, which is more effective/power-saving? Or is there an even better way to make the registry key stick?
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
i1135t said:
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
Click to expand...
Click to collapse
I don't understand the link between:
- the registry key "HKLM", "Software\HTC\QuickGPS\", "region"
- and what you said about GPSTool
In the end how do you solve the problem with the region ?
Chris
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
i1135t said:
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
Click to expand...
Click to collapse
Hmm good solution now its takes less than a min to start tomtom. thanks.
Is this problem in all wm6.1 roms....Im certain that this is the issue with mine as once i downloaded data my fix was much more rapid then without (1.5-2.5mins, no tall buildings around clear line of sight). Any wm6.1 not have this issue??
i1135t said:
But I eventually decided to use the GPSGate application which solved my problem
Click to expand...
Click to collapse
What exactly is it that GPSGate does to solve the problem? Any specific settings you need to apply in GPSGate?
every 2 or 3 days when my alarm sounds i get no onscreen noticfication to dismiss the alarm, only the symbol in the status bar.
When i look into sounds notification/reminders i see the "display message on screen" box is unchecked again so i recheck it.
What causes this to uncheck itself?
are you experiancing this behaviour or have any insight into the cause?
thanks
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Anyone knows how to disable Missed Alarm Alert (symbol on the status bar) so I don't need to go to status bar console and remove it every morning ?
drdoc said:
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Click to expand...
Click to collapse
I believe i was having this problem before i had installed Diamond TF3D.
The search continues.
Im having the problem on TLR3 ROM and i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
I'm using TF3D Config and also 1.93 ROM but I don't seem to have this issue?
Although I have never used it to apply a 'theme' only, to change date/time format and apply one of the performance tweaks.
Have you guys updated your TF3D config via apptodate and also tried restoring defaults (within TF3D config) and then tried applying your settings again?
i too only use TF3D config to format the date, i have updated it using apptodate.
I may uninstall it and see what effect that has, im not really sure that TF3D is the cause of the problem.
rumpleforeskin said:
i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
Click to expand...
Click to collapse
Yes, I'm on the original 1.37 ROM and am seeing this - bl00dy annoying too as it seems such an odd 'bug'....
Mathew
Had this happen again today, really annoys the wife as i spend time trying get the phone to shut up.
I have made no progress determining the cause, but it does only seem to uncheck the box after a soft reset, but strangley not after every soft reset..... the plot thickens
This problem only happens after i reset the device, but not every time.
As i cant find the cause i was thinking of a way to fix the problem.
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
and i have the values for the box checked and unckecked.
I have been googleing for the past hour but having no luck with what i want to achieve.
I would like to write a batch file to open a reg file that will change the dismiss box registry entry to the checked value, but it seems batch files cannot be run from the windows start up folder.
Im not very technically skilled with programming so could someone more knolegable point me towards the correct way of doing what i desired, which is change a rehgistry value at start up.
rumpleforeskin said:
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Click to expand...
Click to collapse
I could write an executable that will restore the registry entires on start-up but I can't find the registry value that controls it.
Which value are you editing?
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
pegaz said:
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
Click to expand...
Click to collapse
If that was in reply to me, I'm looking for registry entry!
This thread seems closest to the problem I have.
For me it is always that on alarm there is no popup where I can dismiss the or snooze the alarm
I always have to unlock the phone (by entering password), tap the status bar, then choose the alarm button and then the pop up appears as it should have done by itself.
This is always, no matter if I reset or not. And, I have checked on "display message" when I look into the settings.
This is freaking weird and annoying.
I've noticed the box unchecks after the sync process via Activesync.
I'm pretty sure it's caused by particular side software we have installed on our Diamons. I propose to post the side software list we have and then point out the pattern.
My list:
MS Voice Command
Finix Battery Icon
Splash ID
Sprite Backup
Diamond Tweak
Resco Explorer
Yandex Maps
Skype
CorePlayer
G-Alarm
Manila Calculator Skin
Yota TV
Nice idea but already flawed given you've not published an exhaustive list. A case in point being Activesync - that's a resident piece of software and furthermore one which you suspect as possibly being responsible!
Or are you certain it is a non-Windows issue? That's quite a leap of faith given we've all previously been scratching our heads...
I don't mean to come across negative, but I also don't want to see a futile attempt at finding a solution!
Mathew
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
I suspect G-Alarm, got to try to play around with it being uninstalled.
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Moonsower said:
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
Click to expand...
Click to collapse
That's a very good point, although it could quite simply be down to a combination of i) a limited number of people using the alarm, ii) affected users not being bothered by the issue, and/or iii) affected people not realising they are being affected!
I suspect G-Alarm, got to try to play around with it being uninstalled.
Click to expand...
Click to collapse
For what it's worth I've never used G-Alarm...
Mathew
Polluxus said:
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Click to expand...
Click to collapse
I had it on 1.93 and still on 2.03
Ok, throughout the day I noticed that the Media Net (EDGE) starts up (two little E's at the top of the tilt displaying) for several min. When I tap the E, it shows "Media Net (EDGE)" connected. Sometimes it stays connected for 15 to 45mins, other times just a few min. When I go to task manager, it does not show anything running. I do not have anything updating, the only two programs I have I update manually which is SBSH weather and a POP email account. How can I tell what it is looking for or what data it is transferring etc.. Why is it connecting?
So with this, how can I figure whats going on and how do I fix it, or this normal.
I do have KasierTweak, is there something in there I can adjust?
Thanks
and yes did a search, I guess I could not find the proper wording to get the right result's
swatcop1 said:
Ok, throughout the day I noticed that the Media Net (EDGE) starts up (two little E's at the top of the tilt displaying) for several min. When I tap the E, it shows "Media Net (EDGE)" connected. Sometimes it stays connected for 15 to 45mins, other times just a few min. When I go to task manager, it does not show anything running. I do not have anything updating, the only two programs I have I update manually which is SBSH weather and a POP email account. How can I tell what it is looking for or what data it is transferring etc.. Why is it connecting?
So with this, how can I figure whats going on and how do I fix it, or this normal.
I do have KasierTweak, is there something in there I can adjust?
Thanks
and yes did a search, I guess I could not find the proper wording to get the right result's
Click to expand...
Click to collapse
try fdcsoft task manager and try to look on the processes that are runing in the background
I have MemMaid, I will check running programs when it kicks on again then post them?
swatcop1 said:
I have MemMaid, you think it may pick it up?
What am I looking for?
Click to expand...
Click to collapse
?? I have used mamaid long time ago, so I dont know.
Its most likely the updates(weather).
But I dont know what u want now, do u want to stop it?
Edit: are u sure u have the auto updates turned off?(in weather)
could u post all installed apps?
Ok, all my weather updates are turned off.
Memaid will show all programs running and running processes.
Which one should I look under when the Media Net kicks on?
Question what will I'll be looking for, what specific program or what will Media Net (EDGE) look like. Will it say Media Net or something?
Like for instance, right now they have 14 processes running
all .exe processes
swatcop1 said:
Question what will I'll be looking for, what specific program or what will Media Net (EDGE) look like. Will it say Media Net or something?
Click to expand...
Click to collapse
No, it won't appear there. When it connects on its own look at the running processes and try to guess if you can find one that might require net access.
Another hint, you say you have a POP e-mail account set up. Check that it isn't defined to check for mail automatically each X minutes. If I remember well this can get enabled by default when you add an account.
Ok, this is what is showing in the "running processes" before the mediaNet kicks on. I have not been able to catch it yet while running. Anything in here looks suspicious that should not be there?
device.exe 2.75mb
cprog.exe 2.63mb
gwes.exe 2.37mb
filesys.exe 2.34mb
shell32.exe 1.87
Transport.exe 315.76kb
services.exe 295.67kb
connmgr.exe 147.71kb
MortScript.exe 115.90kb
HTC ActionScreen.exe 47.90kb
poutlook.exe 31.90kb
saddaemon.exe 31.90kb
NK.exe 0Bytes
Thanks
I've never seen "Transport.exe". A quick search tells me about some Arcsoft program. Maybe it's checking for updates?
As Mikulec asked, a list of the programs you've installed could help... we don't know about all the programs out there...
The programs I have installed;
Kaisertweak
HTC Home plugin
Live Search
Opera
HHC Customize
ILauncher
Pocketweather
HTC Diamond Qwerly
Battery Status
Memaid
Finger Friendly Friends
Again guys thanks for your time and help.
MediaNet just kicked on and I went to running processes and I did not see anything different than what I listed above. Will check again though to be sure.
kilrah said:
I've never seen "Transport.exe". A quick search tells me about some Arcsoft program. Maybe it's checking for updates?
As Mikulec asked, a list of the programs you've installed could help... we don't know about all the programs out there...
Click to expand...
Click to collapse
me either. Arcsoft is messaging program and it could be MMS related. Maybe its downloading mms.
Do u send and receive mms?
kilrah said:
Another hint, you say you have a POP e-mail account set up. Check that it isn't defined to check for mail automatically each X minutes. If I remember well this can get enabled by default when you add an account.
Click to expand...
Click to collapse
this is probably the culprit for your dilemma unless you are accidentally selecting the weather tab on htc home
ok guys went through a rechecked all my settings, I did check the HTC home screen weather to make sure it was on manual update (i do not use the weather program) also made sure that all my auto settings on pocketweather is turn off. I did make one other adjustment though, will see if this helped.
Funny thing is that when MediaNet kicks on, it doesn't appear to effect my battery.
Again, thanks for the replies. Will advise the outcome.