Crash when upgrading my trinity - P3600 Software Upgrading

Hi everybody,
I have a problem with my pocketpc.
I have flashed my trinity with the radio version 1.41.00.11 and the ROM WM6 2.2.
At this step, all is OK but when my pocketpc restart, I have the HTC screen and next the pocketpc is blocked with a write screen.
I have done a hard reset, and the result is the same.
Can you help me, please ?
Thanks a lot.

Flash again the rom

thanks for your response
I can't flash again because the pocketpc is unavailable
I can't access to the phone explorer via windows
Do you know by which way I can flash ?
Thanks

you might find the answer here http://trinityguides.info

Related

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn

big problem,need help!!!

i cant enter my device anymore.
i secured it with an password,but now i try to enter the device after giving the password,but it gives me an error,wrong password.
the password isnt from the phone,but its an programm wich i installed on it,to secure my phone
and i tryd to update it again to wm 6,but after the update,same problem comes again,need password to enter the phone
its an blueangel
thank you,
amir
HardReset - this is your only possibility. BTW: WM6 has problems with password. Dont use this security method.
jakubd said:
HardReset - this is your only possibility. BTW: WM6 has problems with password. Dont use this security method.
Click to expand...
Click to collapse
i already did hard reset, the same passowrd screens appears up again,im getting paranoid here,realy need help
Could you flash another rom on it?
I think this could solve the problem...
gnatto said:
Could you flash another rom on it?
I think this could solve the problem...
Click to expand...
Click to collapse
could you please give me another rom then,cause i really couldnt find another rom for my blueangel,before,it was an mda3 ,but i flashed it into htc blueangel windows mobile 6,so please,could you give me another blueangel rom,not the windows mobile 6,or could you explain me ,how i get back to my mda 3 rom,please.]
thank you verry much,
amir
p.s I ALREADY TRIED MDA 3 ROM FROM WEBSITE WWW.T-MOBILE.NL
but i couldnt put it in there,i tried to flash it,while it was on bootmode
Here is your ROM
I used below file to upgrade my MDA III.
Please note that I will remove the link after jan15, 2008
http://www.zerger.com/XDAFiles/HELMI_BA_WM6_R0_Public.RAR
Good Luck
zerger
You dont need another rom. Just hard reseset and chose format storage and clean reg hive from the menu. You must press the multimedia and the record buttons before the os/radio version appears for you to get the menu.

Need HELPPPP plzzz

hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'

no gsm on boot

hi all,
i am having a problem with the trinity i unlocked sim with a tool i found here and then upgrade rom to 6.1 using hardspl 1.30 by oli till now everything is fine and working i decide to upgrade the radio rom and the flashing went 100% but when the device rebooted it was showing no gsm and it would start windows and get stuck in windows loader i tried to refalsh spl to 1.2 to des and always flashes 100% but 1.30.olipro stays tried to reflash with every radio rom i found for trinity and always flashes 100% but still no gsm i tried os cooked and official but with no avail. i found the original spl 1.06 but its .bin any one know how to load it on the device.? i found too some other people with same problem but i cant find any solutions i checked the device with mtty there is no bad blocks but when i do checkimage it gives me a error on radiorom checksum timeout..... does anyone has a solution for my problem please ? any help would be really appreciate it !!!!
no GSM FIX
hi all to all of you who have my same problem ... after hours and hours hours of searching and trying to find a solution i manage to get trinity back working ehat i did i used this tool attached found here on xda. its made by POF which i thank very much!!! i used it and downgraded the spl to 1.2 olipro after i could flash ant radio rom..... and was back in the game!! hope this could help you all who have the same problem
Hi thanks for this info I have the same prob. Would you plz tel me which ROM did you use to revive your trinity.
thanks
hi,
i have the problem of no gsm ...i download your tools but i dont khnow how to use them ...pleas help me ...
sorry for my english

How to install WM 6.5

I tried to instal 6.5 by theese steps but it wont work! gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now
how to do this?
I wanted to install ROM something like this forum.xda-developers.com/showthread.php?t=517300
what is the problem occurs? explain
When i go to step 15. in this manual: gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now
My HTC stuck in load screen with 0% loaded!
I tried it lot but nothing!
You need to update ur hard spl with - SPL-1.40.OliNex
see
http://forum.xda-developers.com/showthread.php?t=416211
I tried it but it`s not working!
I started ROM Update Utility... next..next...then shows my image version (2.03.414.2).. Update To 1.40.OliNex..next.....next....then starts update.. 0% .. and ERROR The Update Utility cannot connect to your PDA Phone....
Don`t know why it`s not working
"Because you're an idiot"
It's Vital that you READ the guides on XDA for flashing your phone.
All your problems are answered in the forum so you really didn't need to post this. Upgrading your phone from a WM5 to 6.5 is a big leap and Don't expect it to magically fix any issues you may already have with the current version of WM.
You will need to learn how to MTTY if you plan on flashing your phone after a 6.5 rom upgrade because it's not as easy as it used to be.
There is a helpful serach function on the forum I suggest you use it before anyone else wastes their breath.
I have bad in english that`s why i cant find the correct answer in search!
And i dont understaand all the abbreviations like XDA MTTY and lots of others.
I don`t have WM 5 but WM 6.1 and its not so big leap ti WM6.5
That`s why i post this!
And i have no problems when i upgraded my last phone to 6.5 and i dont know why i have problems with HTC Diamond!?
SPL & MTTY
You should have used Olinex SPL before even thinking about flashing your phone
Thinking about it now... you should have bought the diamond unlocker as it's a better solution.
You have to use the MTTY method before flashing with a 6.5 rom as your memory space can be changed to acommodate more/less modules for the ROM. If you don't use MTTY then your phone will fail.

Categories

Resources