Related
anyone tried to get the backpack workin on wm6?
I installed the wm2003 drivers, but just like wm5... it didn't work out..
i think if wm5 dont play nicely with it nor will wm6
it dont have drivers in it for other devices then what build in
so the question is wm6 is more likely to work with 2003 drivers
then wm5 is
@Bstard have you tried if the backpack at least does add battery life?
I installed the wm2003 driver and nothing happend, the system didn't recognize the battery ;-(
didn't test if there is extended battery life with the backpack attached
Bstard said:
I installed the wm2003 driver and nothing happend, the system didn't recognize the battery ;-(
didn't test if there is extended battery life with the backpack attached
Click to expand...
Click to collapse
hi, i tried to on my Wm6, also didnt work.
Can you upload driver?
i want to try that makes work.
I tried this morning. To my surprise the VGA output from the backpack works. Unfortunately that's the least important feature for me. I can't find a CF card and it doesn't show up in battery status.
Unfortunately there are some other good reasons to uninstall these drivers now:
-phone dialer and/or xcpuscalar keep on popping up when I close other programs
-activesync refuses to connect
I very much appreciate Asukal's offer to look into it, I tried to upload the drivers I own but I get the error message "Upload backpack.zip failed" time and time again
Update: several versions of drivers can be downloaded from this thread on buzzdev:
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,6,267,1580#msg-1580
BTW Rictec is the only person that I found so far in any forum saying he had backpack battery status running in WM5
Several people have VGA output running under WM5 and WM6
I haven't found anyone who claims to have CF card functioning
I uploaded the backpackdriver.sa.cab in the uploads/himalaya folder
Bstard said:
I uploaded the backpackdriver.sa.cab in the uploads/himalaya folder
Click to expand...
Click to collapse
thanks guys,
i tried to install it as it 1st on my Himalaya with Helmi WM6,
Then assemble Back pack, OS has freeze same as WM5.
i will check it
I uploaded the VGApack software to
ftp://xda:[email protected]/Uploads/Himalaya/VGAPack.zip
Happy New year to everybody...
Mine has started off bad, I just returned from my X-mas/New year break and I can no longer sync, install or uninstall programs ?
when I connect my PDA to the PC it sees it, but it can't sync, if I go to remove/add programs it shows empty nothing installed.
I can even brows the PDA but I can't copy files to or from it?
I'm lost, can anyone help me out on this I really don't want to do a hard reset.
Thanks.
Anyone.........?
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
edi said:
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
Click to expand...
Click to collapse
Hi Edi, No I haven't installed anything, but I think my problem might be something else (worse), I just realised that I can no longer copy move or delete files from either the PDA or the MC, I get an "access is denied" error.
Anyone have any idea what might have caused this? and better still, is there a fix.
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Audio said:
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Click to expand...
Click to collapse
Hi Audio,
Thanks for the reply, but I do have the latest version and I never had a problem with it until this week.
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Audio said:
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Click to expand...
Click to collapse
Hi Audio, I use both, AS at work and WMDV at home, both used to work fine.
And do you experience the issue on both?
EDIT: Apparently, there may be a problem with ActiveSync 4.5. Just take a look at this list of complaints about it lol.
One user stated:
"I was using AS4.2 with my ETen M700, everything was fine. I wanted to upgrade to WM6 and teh instructions said I needed to use AS4.5 I installed it and tried to connect my device - disaster! The rapimgr.exe process runs at 99% and slows the computer to a crawl.
After 3 attempts, I uninstalled it, and re-installed AS4.2 (available from www.microsoft.com) and now things are working again. "
This may be worth doing to see if this soilves your problem...
Audio said:
And do you experience the issue on both?
Click to expand...
Click to collapse
Yes I have tried it on three different machines, I can see the PDA but it won't sync or let me move or copy files.
It look like I might have to do a hard reset, but I'm hoping not
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Audio said:
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Click to expand...
Click to collapse
Hi Audio, I don't know what to do, I started another thread about no longer being able to either copy, move, delete, install or uninstall anything, I really don't think it's a sync problem anymore. I will wait another day or so and then I'm going clear storage and start again.
what really pisses me off is my wife has no problems at all? perhaps my PDA is ******.
Exactly the same has just happened to me - I tried to connect to ActiveSync this morning to copy a file across via bluetooth, but it refused to connect. I plugged in the USB cable, nothing - the phone charges but ActiveSync does not want to know.
I deleted the device in AS, tried to add a new one - nothing found.
I last sync'd up fine 4 days ago.
I am using Dutty's DualTouch v1.1 release.
I am using AS 4.5.0 build 5096
If I discover services via BT from the kaiser to the computer it finds the ActiveSync service.
I have done a soft reset, no difference, restarted the PC, same. I haven't applied any Windows Updates or made any changes since it stopped working.
I might try rolling back to AS 4.2
Edit: Same with AS4.2
Think it might be clear storage time
Cleared storage and then it worked fine...will take the opportunity to upgrade to dualtouch v2
Hi Blaze, damn it's annoying isn't it, my next move is clear storage as well.
Hope mine works again.
It's bloody happened again I reflashed the rom with Duty's Dual Touch V2. Much better rom, but activesync has just given up again via BT and usb. Maybe it's some inherent problem with WM, or with Duty's roms - which are you using Dave?
I've tried it on a fresh build of XP Pro on an old machine with nothing than AS & Outlook 2k3 on - same, AS sees the device, but wont sink. Problem seems with the device...
Dave... said:
perhaps my PDA is ******.
Click to expand...
Click to collapse
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Brilliant! Lmao! :d:d:d
unwired4 said:
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Click to expand...
Click to collapse
Good Point I didn't even notice, put it down to stress...
PS: For anyone who's interested, I ended up doing a hard reset, reinstalled my apps, restored my backups and it's working fine now.
Did you have F-secure Mobile installed? If not, I could take that away from possibilities that's causing this problem
So I can crash windows mobile in areas of my town where there are lots of wireless access points. The wifi is on when the crashes happen. I propose that WM6.1 can not handle the large volume of aps in these areas. HTC is giving me the run around and saying it is a hardware problem. It only happens when I am in range of many aps(I would guess approx. 30).
To get the crash I boot the phone up with wifi already on and with 30sec to 1 minute. I get a "We're Sorry" box from Microsoft telling me something crashed.
I will attach my dump files in hope that someone here can read the dump files.
Has anyone else seen this happen?
I am using the below rom but skipping customizations install after the flash.
Rom:3.57.502.2 Radio:1.65.21.18 OS:19214 Build:19214.1.0.4
well is it telling you what app is crashed, and is it stopping your from connecting to an ap and browsing?
Ok so what app crashed. I am aware that on some of the dumps navizon was open at the time. So it may say that it crashed. But some of the other dumps I had no programs open.
Any suggestions on why it crashed and what i can do to prevent it from happening.
Anyone else have any suggestions or able to read the error logs.
wzc
Hi,
I own a SE Xperia, and I have a similar problem. At my desk at work, there are more than 40 nearby access points, so when I turn on wifi, I get the device.exe crash, and I cannot connect to any of them. I think the problem is in the wzc of windows mobile. Becasue when I use odyssey access client, it can scan and connect to aps without any problems. I tried using different wzcsvc.dll, I tired playing with the tnetw12511 registry settings, but couldn't find a solution.
Any suggestions?
I went to a custom rom and it fixed the problem. Either the custom rom drivers or the extra 20mb of ram that are now available caused the problem to go away.
drewcam888 said:
I went to a custom rom and it fixed the problem. Either the custom rom drivers or the extra 20mb of ram that are now available caused the problem to go away.
Click to expand...
Click to collapse
Which rom did you use?
I have used about six tilt roms and none have frozen. Listing them doesn't do you any good since you don't have a tilt.
drewcam888 said:
I have used about six tilt roms and none have frozen. Listing them doesn't do you any good since you don't have a tilt.
Click to expand...
Click to collapse
Could you please extract and send me the "TNETW1251.dll" and "wzcsvc.dll" files under windows?
Thanks in advance
I don't have the WZ file. The other is attached.
Hi everyone..
I am a somewhat profiecient Tilt user.. had a few windows mobile phones before.. and had my tilt over a year.. I never had any problems with the WM 6.0 rom so I never upgraded it.... But now I ahve a problem... Today my GPS wasn;t locking on so I reset the phone, and as usualy it fixed the problem.. but now my messaging (and email) won;t work...
I have the HTC Home Installed (been installed a long time) and I use the buttons on the clock screen on it to access my MMS and Email... I went to send a txt and it did nothing.. I thought hte phone was froze.. but other stuff works.. I tried email next.. same problem... It also says the MSVC has encountered a problem and that is not working either.. it all happened at the same time....
The real problem is I have my phone EXACTLY how I wanted it.. with this tweek and that tweek... This program and that program.. this setting & that setting... sigh... I have an odd provider (Einstein PCS) so I had to set up all custom MMS, Email, Internet, and other setting that took a long time to get them all just "right"... I thought the SD card may have went, but other software that I know is on the SD card runs fine (including tomtom)... Any suggestions from anyone before I do hard reset? Please.. I don;t want to have to redo everything...
Retrace your steps
Hi
I have found that when something stops working after installing new software, if I uninstall any software, in the reverse order it was installed, this usually restores functionality. Uninstalling one piece of software at a time and running trials in between uninstallations usually helps to identify the culprit. If you haven't actually installed new software to co-inside with the failure then this advice is no good for you.
For future reference I would recommend using Sprite Backup (I think that the latest version is 6.5 and can be found on their website). With this software you can make a back up of your existing configuration prior to installing any new software. Then, if anything goes wrong you can just hard reset and run the backup file (stored as an .exe file) from the storage card and you'll get back to exactly where you were before the install.
Hope all that helps.
Cheers
andrew-in-woking
Thanks for the advice but I did nto install anything.... I will get that sprite backup though for future use... thank you.... What I did find this morning is this...
http://www.htcwiki.com/thread/107262...&maxResults=20
It seems many other people have had MOST of the same problem... When I followed the directions and deleted the inbox om my SD card, it fixed everything... even the Microsoft Voice command.. no idea how they are related, but it must be.... The only problem is that now after doing all this research on new ROMs, I found one I want to try... now I gotta decide if I want to go through all that work if I don;t have to... I think I will do the sprite backup.. download a default at&T 6.0 rom if I can find one.. then TRY The new rom.. if I hate it.. install the default rom and resotre my settings.. Thansk for you help though
Teej53214 said:
Hi everyone..
I am a somewhat profiecient Tilt user.. had a few windows mobile phones before.. and had my tilt over a year.. I never had any problems with the WM 6.0 rom so I never upgraded it.... But now I ahve a problem... Today my GPS wasn;t locking on so I reset the phone, and as usualy it fixed the problem.. but now my messaging (and email) won;t work...
I have the HTC Home Installed (been installed a long time) and I use the buttons on the clock screen on it to access my MMS and Email... I went to send a txt and it did nothing.. I thought hte phone was froze.. but other stuff works.. I tried email next.. same problem... It also says the MSVC has encountered a problem and that is not working either.. it all happened at the same time....
The real problem is I have my phone EXACTLY how I wanted it.. with this tweek and that tweek... This program and that program.. this setting & that setting... sigh... I have an odd provider (Einstein PCS) so I had to set up all custom MMS, Email, Internet, and other setting that took a long time to get them all just "right"... I thought the SD card may have went, but other software that I know is on the SD card runs fine (including tomtom)... Any suggestions from anyone before I do hard reset? Please.. I don;t want to have to redo everything...
Click to expand...
Click to collapse
Do you have your Einstein settings. I haven't been able to get my Fuze to connect reliably. I'd certainly appreciate it. Thanks!
Hey guys,
I bought a HTC Touch Diamond in Dec 2008 and it was more or less fine until a few weeks ago when it just messed everything up. I brought it back to the store and got a new one last Friday. I was busy setting it up the whole weekend (installing Skype, Palringo, Fring, registry editor, .cab-file to get rid of the problem that the keyboard is not changing back to letters (was stuck in numeric mode), Google maps didn't work etc etc.
But now I have a new weird problem. After all the installations, everything worked fine. Then I started to put some pictures via bluetooth on the device, all fine, but out of a sudden, it's so sloooooooow!!! First I thought it's not working at all anymore, but by now I found out that it just takes ages to open programs, e.g. File Explorer, Browser, Settings... or when I receive a sms or email and click on it to open it fully... doesn't matter what I do, except using touch flo, this is working fine. And when the programs are finally running (after no joke about a minute), they are running very fast.
I have a Vodafone branding but am using it with an o2 sim. I never did a rom update or anything.
Does anybody know what that could be and could you help me???
Of course I could just return it again, but it would really suck as I just set it up, put all the contacs on etc (Active Sync isn't working as my pc has vista...), so it would be really great if anybody could help me!!!
Cheers,
mondiera
mondiera said:
Hey guys,
I bought a HTC Touch Diamond in Dec 2008 and it was more or less fine until a few weeks ago when it just messed everything up. I brought it back to the store and got a new one last Friday. I was busy setting it up the whole weekend (installing Skype, Palringo, Fring, registry editor, .cab-file to get rid of the problem that the keyboard is not changing back to letters (was stuck in numeric mode), Google maps didn't work etc etc.
But now I have a new weird problem. After all the installations, everything worked fine. Then I started to put some pictures via bluetooth on the device, all fine, but out of a sudden, it's so sloooooooow!!! First I thought it's not working at all anymore, but by now I found out that it just takes ages to open programs, e.g. File Explorer, Browser, Settings... or when I receive a sms or email and click on it to open it fully... doesn't matter what I do, except using touch flo, this is working fine. And when the programs are finally running (after no joke about a minute), they are running very fast.
I have a Vodafone branding but am using it with an o2 sim. I never did a rom update or anything.
Does anybody know what that could be and could you help me???
Of course I could just return it again, but it would really suck as I just set it up, put all the contacs on etc (Active Sync isn't working as my pc has vista...), so it would be really great if anybody could help me!!!
Cheers,
mondiera
Click to expand...
Click to collapse
To save you a lot of time. You do not have to install some kind of ActiveSync on Vista. It is included and called DeviceCenter. Just a new name but with the same functionality as ActiveSync.
Did you soft-reset the device when noticing that it takes to much time to load an application?
Did you disable TouchFlo (eats a lot of RAM) for some time to see what happens?
Hey,
Thanks for answering so quickly... Yes, I did MANY resets, but it doesn't help. I also deleted a lot of files again, but didn't help either, and there's not much on the device anyway (data storage 51.45MB full, 34.37MB free, program storage 64.14MB full, 46.90 free, internal storage just 37.72MB full). And yes, I also enabled touchflo but it didn't help as well. As I said, touchflo is working fine, when the programs are running they are very quick within the application (quicker than my old device was), but UNTIL they are open, it really takes about 40-60 seconds - just not acceptable!
And thanks for the tip with the Vista Device Center, but I just connected the phone via usb, opened this Vista Device Center, clicked on settings, chose usb/bluetooth etc, the device asked whether to connect via Active Sync which I confirmed but now nothing is happening? And Vista Device Center says it's not connected...? This phone is really driving me insane! Seems like I have to return it again because I really can't work with it being sooo sloooooow :-(
mondiera said:
Hey,
Thanks for answering so quickly... Yes, I did MANY resets, but it doesn't help. I also deleted a lot of files again, but didn't help either, and there's not much on the device anyway (data storage 51.45MB full, 34.37MB free, program storage 64.14MB full, 46.90 free, internal storage just 37.72MB full). And yes, I also enabled touchflo but it didn't help as well. As I said, touchflo is working fine, when the programs are running they are very quick within the application (quicker than my old device was), but UNTIL they are open, it really takes about 40-60 seconds - just not acceptable!
And thanks for the tip with the Vista Device Center, but I just connected the phone via usb, opened this Vista Device Center, clicked on settings, chose usb/bluetooth etc, the device asked whether to connect via Active Sync which I confirmed but now nothing is happening? And Vista Device Center says it's not connected...? This phone is really driving me insane! Seems like I have to return it again because I really can't work with it being sooo sloooooow :-(
Click to expand...
Click to collapse
I think you should. Maybe you should first try to connect to ActiveSync with your next device and after that start installing.
I'm sorry that I can't help you out.
You hav a faulty memory chip. Get it replaced.
-------------------------------------
Sent via the XDA Tapatalk App android
Thanks guys, I think I will... I really can't keep it like that. And if even you don't know a solution, I will get it replaced. Thanks anyway!!