Database Develop

Using Wizard as remote for remote desktop

can i use my wizard to contol my server???
for example i use vnc and netsuport can i configure my wizard to conect the same way another pc would, give me a view of the screen and give me control of mouse etc???
I have looked through other topics and had no luck finding a solution, maybe im not looking hard enough. if iv missed a post please point me to it.
oh and anyone who has a working remote for tv dvd etc using the ir port also pleas let me know.
[email protected]
[email protected][/b]

VNCViewer for PocketPC
You can also use terminal services which comes preinstalled
Mocha Remote CLient Supports remote desktop and provides compression its 20 dollars so its not free but it works really really well.

VNC
Will this work over gprs??

Yes, Slow, but yes it will

vnc
sweet ok ill see if i can get it to run now.

ok well i installed vnc how do i get it to conect i see it needs a server ip i have this but its the next bit im missing as it shows 192.168.2.10:0 as an example ill use that as mine
i know my ip its the bit after the : i dont know so i have 192.168.2.10:?
what am i missing??

ok figured that out it was my conection port. DERRRR!!!!
the thing is this only works when i have the wizard plugged in to my pc via active sync. when its not it just leaves the program. not like when the conection fails and the little menu flashs up and then pops off, just closes
Any ideas???

Goto logmein.com and register for a free account.
Then log in on your wizard.
No brainer to setup.

Possible to remote desktop 2 tilts ?

Is it possible to connect 2 tilts via remote desktop that are not close together ?

Directly? Not that I'm aware of - however if you can remote to a PC that the Tilt is connected to, you can run the remote view software and see what's going on on the Tilt on the remote PC screen.

Look into a free software called Hamachi - it's a nice virtual networking tool. They make it for Windows Mobile as well as Mac and PC. I can remote desktop into my PC from my phone, never tried vice-versa. I have no idea if they have a remote desktop server for WiMo, but if they do Hamachi will allow you to be on a virtual network.

Hamachi is a VPN product of www.Logmein.com , which is what I think you were referring to. Logmein has a free version to remote into your PC from a WinMo device, but does not control a WinMo device. I thought I saw something like that though on Gizmodo during CES try searching there.

Pocket Controller Professional can connect to your PPC from your desktop via 3G or WIFI. It shows the actual screen on your desktop & is pretty slick. It takes a bit of work getting it going through the 3G/Edge/Gprs Connection though. Also, it doesn't allow for file transfer. Only controlling/viewing.

gatordent said:
Hamachi is a VPN product of www.Logmein.com , which is what I think you were referring to. Logmein has a free version to remote into your PC from a WinMo device, but does not control a WinMo device. I thought I saw something like that though on Gizmodo during CES try searching there.
Click to expand...
Click to collapse
Hey thanks that works pretty cool.
I had dad's tilt on line last night helping him set it up.

Does anyone know how to use Remote Desktop?

I downloaded the cab, but i dont know where to go from there. I am just a normal person with a laptop and a tilt.

Do you have a domain set up for your laptop? Probably not so there is no way for you to use the Remote desktop app there are other apps out there but most cost money

You dont need a domain setup to use it. You can just leave that blank. You need to know your IP address, and you need to have a password setup on your machine for remote desktop to work, you can not connect if you do not have a password.
If you are behind a router, you need to forward the correct ports for it to be able to connect to your pc as well.
After its setup, you just need to connect via ip address, through a connection that is not behind a nat, if you are using att, you need to have access to the isp.cingular apn, wap.cingular does not work.

This is a pretty loaded question. Along with the information from fastblack, you'll also need to ensure your version of Windows supports Remote Desktop and that remote connections are allowed. Also depending on the environment there may be other security settings on the machine you are trying to connect to that will need to be considered.
In short, if you don't know how to do this already, it might not be the right solution for you. It can get pretty complicated in some cases.

I have vista premium. Say was to use a router for my laptop and my tilt for wifi. How do i create a password for my computer?

unk3 said:
How do i create a password for my computer?
Click to expand...
Click to collapse
i can understand somewhat if someone comes here asking how to do something on a phone that is in the manual.......but now u're asking something about setting a password on your computer.......i dont use vista, so i can exactly tell you where to look but, i hear that vista comes with this brand new thing.......its called the help files, you should check it out

why not just use logmein (www.logmein.com) easier, faster, better

from logmein use hamachi mobile on the laptop and hamachi regular on the desktop to bypass firewalls....
Oh never mind, you would still need to know how to setup basic network security etc.
If this is the route you want to go pm me and I can send you some links to get started. It's not really that complicated but depending on the details there are alot of variables. Would post the links but would have to start googliny myself
But if you google you find allthe answers and any guide telling you how to RD from a normal computer to another - just treat the handhelp RD software the same.

This is how you do it in XP, Vista setup has to be very similar I bet:
Set the password for the windows user account you log on to on your PC. This can be done in Control Panel - in the User Accounts application.
Next you have to activate the remote desktop function. This can be found by right-clicking My Computer, go to properties, and then to the "Remote" tab. Check the "Allow Users to connect remotely to this computer" box.
Now check your local ip. this can be done by selecting the "Run" button in start, then type cmd and hit enter. In the that window type: "ipconfig" (without the quotes) and a line will read IP address . . . . . 192.xxx.xxx.xxx or something of the sort.
Thats the IP address you connect to, and when the prompt for username and password comes out, type in your Windows User Account respective username and password.
Good luck =)

delete. nm this

Jimmyy said:
This is how you do it in XP, Vista setup has to be very similar I bet:
Set the password for the windows user account you log on to on your PC. This can be done in Control Panel - in the User Accounts application.
Next you have to activate the remote desktop function. This can be found by right-clicking My Computer, go to properties, and then to the "Remote" tab. Check the "Allow Users to connect remotely to this computer" box.
Now check your local ip. this can be done by selecting the "Run" button in start, then type cmd and hit enter. In the that window type: "ipconfig" (without the quotes) and a line will read IP address . . . . . 192.xxx.xxx.xxx or something of the sort.
Thats the IP address you connect to, and when the prompt for username and password comes out, type in your Windows User Account respective username and password.
Good luck =)
Click to expand...
Click to collapse
this is correct assuming you are:
A. attached to wireless
B. on the same network as the PC you are trying to control
if you want to control your home PC externally, there would be 1 additional step, and two optional but recommended steps.
To access remotely (from anywhere in the world), you would have to go into your router configuration and map port 3389 to the ip address of your vista machine. now for the two optional steps that would make your life easier...
1. set a static ip on your vista machine that is out of dhcp range.
2. use a service like dyndns.org and either set this up in your router if compatible, or install the free update client on your PC.
with this setup you should be able to access all your pc resources from anywhere in the world, not only on your PPC device, but any windows PC with a Remote Desktop client.
security note - set a strong password on your vista machine. port 3389 is well documented and scanned for by hackers. if the option is there, while your in your router turn off ping reply.
if all this is foreign to you, find me @ www.insiteitsolutions.com and i will take care of you.

Cab??
I can't find the remote desktop cab anymore. I tried searching the forums. I've looked at Dutty's site and all the cabs. Can someone point me to it please. I think maybe I am just not seeing it for some reason. I'm sure it's there, I've downloaded it before. Thanks!

cliff_lusk said:
I can't find the remote desktop cab anymore. I tried searching the forums. I've looked at Dutty's site and all the cabs. Can someone point me to it please. I think maybe I am just not seeing it for some reason. I'm sure it's there, I've downloaded it before. Thanks!
Click to expand...
Click to collapse
this what your after?

thanks man... really works... I´m writing this from my Mogul... Remote Desktop way... way to cool... thanks a lot...

Setting up Remote Desktop Mobile..How?

I'm trying to Remotely access my computer with Remote Desktop Mobile. I have it built into my ROM and was browsing Youtube and saw Windows XP on this guys PDA..obviously RDM. What do I have to do to set this up. Thanks.

gqstatus0685 said:
I'm trying to Remotely access my computer with Remote Desktop Mobile. I have it built into my ROM and was browsing Youtube and saw Windows XP on this guys PDA..obviously RDM. What do I have to do to set this up. Thanks.
Click to expand...
Click to collapse
What is so special about the video, can you post the link? If your on your home network on wifi you can remote to your pc or connect thru the data connection if you have a public box.
-McMex

See this link for how to enable remote desktop on your PC, how to setup your router/firewall to allow it to connect to the outside world and DDNS services for name resolution. I've briefly read through it and have confirmed it provides all that you'd need to set up Windows XP to allow remote desktop connectivity from any device (RDP capable phone, Linux, PC, Mac, etc.)
If you need specific help for Vista, I'm sure Google will give you what you need, if you change my search parameters "remote desktop firewall" to include 'Vista'. I still think the link given above will still be of use, Vista or not...
Hope this helps!

there a reason you dont want to use the free edition of logmein.com ?

Im d/l'ing log me in right now. Thanks man appreciate it

can you tell me what setting you have on your tilt. So i can use the screen space on my phone to the max without making it look weird.

needing a different APP for remote access

Hello guys, I have searched for some apps to get the Remote Control, by my fuze to PC, I found remote control, remote pc, remote desktop mobile, and others of them.
The problem is that my home's IP changes every time, so the best app I found was z2remote2PC, becaus this you choose your username and password, and it is all necessary to log in, do not need the system IP, the problem was that I didint achieve the registration for it, I would like to know an APP like this without registration or with the crack/serial, anybody know?
thanks

basmareck said:
Hello guys, I have searched for some apps to get the Remote Control, by my fuze to PC, I found remote control, remote pc, remote desktop mobile, and others of them.
The problem is that my home's IP changes every time, so the best app I found was z2remote2PC, becaus this you choose your username and password, and it is all necessary to log in, do not need the system IP, the problem was that I didint achieve the registration for it, I would like to know an APP like this without registration or with the crack/serial, anybody know?
thanks
Click to expand...
Click to collapse
Can't you use a free dynamic DNS service like no-IP, or something?
Cheers,
Steve.

yes, I can.
But, How can I obtain it?

just registred on my-ip.com
what should I do now?
I dont know how to do

basmareck said:
just registred on my-ip.com
what should I do now?
I dont know how to do
Click to expand...
Click to collapse
Now you have to forward port 3389 to the internal ip address of you computer (192.168.1.X or similar) within your router. This website should help you out www.portforward.com . Once that is done, go into system properties ---> remote ---> and enable remote desktop. Download and install no-ip DUC (dynamic update client) and let it startup with your PC (this allows your external ip to be constantly mapped to XXXXXX.no-ip.org)
To access your remote desktop. type in XXXXXX.no-ip.org within the remote desktop window.
If you need any help. Feel free to ask!

make your life easier, just use logmein. all you gotta do is install the client on your phone and desktop and log in from your phone and you can access your desktop anywhere in the world.