Is there a way to let the Tomtom navigator screen come back (main screen)
when a phone call gets connected?
Now the phone pad stays in view and I have to shut it down with X or hang up the phone then it gets back automaticly.
Or is there a program how can do this for me, so minimize phonepad on connection and Tomtom screen in front...
On WM5 this worked with no problems
I miss this feature too.
On my Ipaq 6945 (WM5) tomtom screen popped up as soon as the call connected. But on the Kaiser it's bit of a hassle to get the tomtom screen to the front.
I would expect if you mapped a button to a task manager, you could use it to switch back to the tomtom app. I have a button mapped to this... I'll test it out when I have a chance.
I did test it, and it does work. I'm using AE Button plus to map multiple functions to various buttons. I have a double-click of the windows start button mapped to switch to the next application, and a press-hold mapped to bring up the AE task manager. Either one works: double-clicking toggles between the open apps, and press/hold brings up the task manager with a list of apps, and clicking on the desired app brings that one to the front. In either case, the phone call stays active, but I'm able to toggle the screen between the phone app, and TomTom.
Related
Hi everybody, my first message here
few days ago i got my new Qtek 2020i... but i have some problems with it..
1) sometimes (expecially when activly using) I hear single flicks(sounding very likly elecric discharges) from device...(even when sound is off)... last time i noticed that it sounded at the moment I quit program and memory it used was released... but sometimes it flics just when standing in cradle.... does anyone have same noisy sounds? or it's damaged device, and I should replace it?
2) I can't close dialing screen... I installed spb plus plugin which makes programs really close when you press X button.. it works, but it refuses to close dialing screen - when i press top rignt corner shortly - it blinks with phone screens I just used(exacly them - if I pressed on "quick call" button, then returned and clicked on history of calls and returned again - it will fastly show that 4 screens in that order) and returns to dialing screen again.... I can exit it only by holding top right corner button for 3 sec's or start button... but it still holds "phone" task in memory(spb plus shows it.... but there is now such task until I use phone for the first time after soft reset) - and if I use phone again - the number of screens I'll see on exit will increase and increase untill I make soft reset.... Of course I can always exit by long pressing the button... but it's annoying, and maybe there is another solution?... is that my software problem? or it's windows bug?
ps thanks for nice forum, I already found a lot of usefull info here =)
Hi experts, I was using ArtZ's Widcomm WM5 rom and radio 1.15 for a week with no problem. I think after I uninstall the HTC SmartDial and problems came up. The Answer(Green Phone Button), Hang up(Red Phone) buttons and D-pad including action button in the center of d-pad are not functioning as they should. When I press answer button in WM5, first start menu, contact and calender all pop-up. The rest of the buttons including D-pad starts different programs. I tried to reflash to Ivan's WM5 rom and downgrade to WM2003, but the buttons still won't function properly. Help, I can't even answer the phone or hang up using buttons.
YEAH! FIXED itself.
I took out the battery and leave it over night while the backup runs out. I put back the main battery and buttons works again. It is nice to map the Answer button to voice activate or something else. Does anyone knows how the change the phone buttons or D-pad to some other functions?
Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419
Sorry if this has been discussed already, but is there a way to disable the Start Menu, and for that matter EVERYTHING but the dialpad while on the phone? I used KaiserTweak to keep my phone awake, but now everytime i go to use the dialpad while im on the phone, my ear has managed to open the start menu or some program and its very annoying .
TIA
I just knock the power button to disable the screen - then flick it on again if I need to tap keys.
I tried this but it doesnt really work. The phone seems to turn itself back on at some point during the call, and then when i go to hang up or use the keypad, i have google maps or some other app opened up. Major pain in the butt. If someone has a way to make the dialer app "always on top" or disable the start menu and/or taskbar when the dialer is open, that would be awesome for me.
by default, the screen is suppose to shut off after a few seconds while you are on a call. Have you made a reg hack to change this? or are you suing a cooked ROM? Most cooks will turn off this feature. Also, it's the first option in Kasier Tweak.
i've tried with it on and off. The problem seems to be that if you hit the wheel on the side (to adjust the volume) the screen turns back on...so if you want to adjust the volume, you have to pull the phone away from your face first, and then hit the power button again when you're done.
I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.