Related
Hi i saw a couple of days ago that my N1 do something odd when turning the screen to sleep mode, sometimes (not always) some thick and soft colored lines (light green or light red) appear and dissappear VERY quickly in the bottom of the screen... is this a normal behavior? Whut should i check to see if my screen is going to fail?
my screen works perfectly but... i really dont like this behavior
I have seen that too a few times; just don't give it too much importance.
Hey Fran!
I see you are latin american just like me!
If you like, you can ask for me messenger so we can chat about cellphones
Dude, im a little paranoic, does this happens very often to you?
have anyone faced this trouble too?
I just noticed this same thing last night. it happens maybe once every 6 times you turn off the screen. it happens on the bottom part of the screen.
however one observation, this does NOT happen if you are viewing the lock screen and then turn off the screen. it only happens when viewing the homescreen, or web browser, etc.
so because of this fact, it doesn't happen all the time, nor on every screen, so that tells me it might be some type of software glitch or power glitch. I don't think this means our screens are failing.
this is a VERY difficult issue to notice.
Thanks for answering Roger!
Im a little bit uncomfortable with this issue because it makes me think that my phone's screen will stop working any time... i may say that i have noticed that this is happening more often now than before...
I hope im just being paranoic about this!!
Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Actually you could either turn on the screen lock so that even if it turns on, it's locked and none of the buttons or screen touching will do anything, and the machine will turn itself off after a while.
Or,
you can install BSB tweaks and set it so that the phone doesn't turn on unless you tell it to.
Most of the time it's not the device, it's the user. Especially obvious when reading user reviews and most users claim features don't exist when in fact they never found them. Or phone is capable of certain things, but the user is not only unaware, they are angry the features are not there.
GET TO KNOW YOUR DEVICE or use available tweaks and information
use a loud ringtone, use vibrate, use a screenlock program... (S2U2 is excellent, but you may find it complex).
Or extend the phone ring time before it goes into voicemail (that's in phone settings I recall)
The phone is not perfect, but it can very easily be configured to avoid accidental answering or not noticing the call in the first place. That said, the standard options are not good...
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Faceeat said:
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Click to expand...
Click to collapse
First of all tweaking does not mean a phone was badly designed, tweaking or modding gives the option to add, remove, or change anything you want in your phone. With your logic every smart phone was badly design becuase everybody tweaks their phones. And what you are saying makes no freaking sense. How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol? How about you give more info on what rom you are using becuase what your saying makes no dam sense.
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
With your logic every smart phone was badly design becuase everybody tweaks their phones.
Click to expand...
Click to collapse
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol?
Click to expand...
Click to collapse
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Faceeat said:
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
For the 2nd time what rom are you using? 6.1 or 6.5? If it keeps being touched on your belt clip why not just keep your phone in your pocket instead? Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off? Also maybe the latest version of the lock app S2U2 V2.41 might solve your problems. I've had my phone for 8 month's and have never experienced what you are saying or herd of but then again I don't keep my phone on a beltclip I keep it in my pocket. It sounds like S2U2 2.41 should help because it gives access to those options you want to change in the S2U2 settings.
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
altae said:
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
Click to expand...
Click to collapse
My phone is the same way but I'm on a custom rom. He might have to flash is phone if nothing else works.
Faceeat said:
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Click to expand...
Click to collapse
Everyones different, every one wants something to work a little differently.
Faceeat said:
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
As mentioned previously there are many alternitive unlocking programs
Slide to unlock 2 (S2u2) is very good, customisable and free.
Here is the website http://ac-s2.com/ you can also find threads about it on XDA Developers.
I am currently using Throttle lock, Provides extra security without having to use pins, customisable, and free here is the website http://www.throttlelauncher.com/portal/Products/ThrottleLock/throttlelock-09
Once again you can find threads about it on XDA Developers.
to use either of these programs, just download the .cabs from the websites, transfer them to your phone and click on them to begin installation.
hope that helps.
For the 2nd time what rom are you using? 6.1 or 6.5?
Click to expand...
Click to collapse
6.1
Everyones different, every one wants something to work a little differently.
Click to expand...
Click to collapse
Yes, but I'm pretty sure no one wants their phone wasting batteries.
If it keeps being touched on your belt clip why not just keep your phone in your pocket instead?
Click to expand...
Click to collapse
What difference would that make? I keep other things in my pocket that are probably more likely to hit the touch screen. Besides, I got the phone before I got a belt clip. It was in my pocket first. I thought the belt clip would make it better. Since it doesn't I still prefer the belt clip for the phone's accessibility.
Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off?
Click to expand...
Click to collapse
On that screen in the settings there's an option to turn off the device after a certain amount of time. Before, when I was in those settings, I had it unchecked, thinking it would turn the phone off completely. But it does exactly what I want—it disables the touch screen after a minute.
Still, that's not a perfect solution, but it helps a lot. That plus the lock app should make it well within working standards. Thank you.
SORRY FOR WASTING YOUR TIME GUYS. I take back what I said. I'm now an enlightened individual. I can build rainbows with my mouth.
Faceeat said:
Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Click to expand...
Click to collapse
Maybe a magnet on your belt phone keeper
turns on the phone...........
Recently I also discovered that keeping X1 close to a second mobile phone MAKES X1 randomly open apps by itself....
Crazy but true!!!!
Once somebody calls you and quits,
without your reaction there's no way you can activate anything if your phone is locked with a code....
A short press of the power button suspends the screen? lol.
I was about to say it but sean0r beat me to it (by weeks lol)
I felt the same thing when I first bought the phone (1-2 hours).
I just usually set my backlight to turn off after 10-30 secs. (Settings->Power->Advance Tab)
And I also don't use the lock feature since I think it's more of a hassle then to just turn the screen off (power button, like sean0r said) then turn the screen on again when I'm about to use it. It basically does the same thing like the lock/unlock button, it help prevents unwanted screen touch, only I feel it's way way more faster than the unlock button (even if you configured the lock/unlock button, to lock quicker).
And since you're new, if you haven't used any of the great custom ROMs you should definitely try it!! Read the guides carefully though, I warn you it might be addictive =D
The custom ROMs and this great XDA community is what made me keep this phone despite this phone's poor poor poor poor poor...I mean horrible build quality! Sony should thank these guys...seriously...
Sorry for bumping an old thread...
I'll rebump - flash Mr. Rusch's Touch X ROM if you are a noob. It is slick, stable, and well configured by default.
It isn't the flashiest, but it is stable and convenient. I highly recommend for beginners.
Sounds like you're using the actual security lock with password, try just using the keylock where you slide it to use it. (Like iphone)
regardless, I think you should flash energie rom on your phone.
Ive flashed many many roms including spikegottis, 826x, and even various Titanium roms but energie is the best overall for speed, apps and reliability
as the title says i was reading when the menu started showing and hiding again and again i tought was some book issues but when i got to the homescreen it began to run apps i had on it, i have no idea of the cause of this problem
I've had this same problem. I believe it's just the software and not a deficient screen. If you look over on the nookdevs website, there's a page about recalibrating the screen. I've tried it a couple of times and it's definitely improved it. Every now and then something wacky happens, but I guess that's to be expected when you let B&N develop for Android.
I had this happen myself once, and it was pretty annoying... If I didn't have adb available I don't think I could have fixed it until I did. I wasn't able to tap the screen myself, it was taping all over the place.
I did manage after a few minutes to get multitouch paint installed and it was drawing weird dots, lines, angles, etc...
I now have the recalibrate command in gscript but not sure I could run it while it's acting up. Luckily it's only happened once, and it happened while plugged in but never seen it happen again.
Happens a lot on my NC, and I think every time its because my kids touch it with dirty fingers (sweets, chocolate etc), smearing small amounts of dirt on the screen.
The screen goes nuts within few seconds, thinks its being clicked etc...
Wiping/cleaning the screen helps to resore normal behavior, btw - while the screen is moist it does not work for me at all...
Ordered screen protectors, lets see if it makes a differencel
My screen randomly goes nuts as well. It seems like a sudden, rather than a gradual thing. The screen sometimes gets pretty dirty, but cleaning it didn't seem to make much difference. Odd thing is, what DID make a difference was taking it out of the aftermarket case. I have no idea why this would work, but it does. One thing this case does is that it pushes the power and volume buttons in, as it uses four elastic straps at the corners. Maybe holding these buttons a certain way recalibrates the screen, and if you're touching it at the time, it freaks out?
I've noticed my screen only bugs out when I have it plugged into the charger.
As long as its unplugged, its fine. As soon as i pop in the cord, the screen goes haywire.
Only the wall charger though, not when its plugged into the USB on the computer.
My screen was doing that until I got a screen protector.
Sent from my LogicPD Zoom2 using XDA App
Also, if you lock and unlock the NC it should stop acting funny.
I noticed that too. Mine hasn't gone REALLY nuts since I took it out of it's case, but sometimes when playing angry birds, it freaks out to the point where I can't play. Hitting the power button, and then hitting it again, and unlocking makes it normal. Wouldn't that indicate it's software instead of hardware? Maybe there's more than one problem?
RChadwick said:
I noticed that too. Mine hasn't gone REALLY nuts since I took it out of it's case, but sometimes when playing angry birds, it freaks out to the point where I can't play. Hitting the power button, and then hitting it again, and unlocking makes it normal. Wouldn't that indicate it's software instead of hardware? Maybe there's more than one problem?
Click to expand...
Click to collapse
Mine does the same thing every now and again. And like you, locking the screen and waking it back up fixes it every time. It's definitely software related.
Do your cases have a latch? With a magnet? Because I'm starting to think that may have something to do with it.
My case has a latch, but the magnet is not against the nook when I'm using it..
HotShotAzn said:
Do your cases have a latch? With a magnet? Because I'm starting to think that may have something to do with it.
Click to expand...
Click to collapse
Heh, I've considered that.. Also considered the mystery sensor to the left of the Nook button too.. Nook is afraid of the dark.
Seriously though, with the CPU guvna' set to ondemand and wifi turned OFF before I power it off I haven't seen it reboot yet. It rebooted once yesterday and I know it had wifi left on as I had just been using it and didn't turn it off before it went to sleep.
So totally making up numbers here....
Default CPU governor + wifi on = 30% chance it's gonna reboot when it goes to sleep..
ondemand governor + wifi on = 20% chance it's gonna reboot
ondemand govenor + wifi off = <10% chance it's gonna reboot (not gonna even say 0 here.. heh)
RChadwick said:
My case has a latch, but the magnet is not against the nook when I'm using it..
Click to expand...
Click to collapse
I tested this theory. When the Nook is in the case, I get crazy screen taps when i try to type something. Out of the case, its perfectly fine.
When I just rest the Nook on the open case (not inside the straps/holders), it will also get crazy screen taps.
One thing to note is I also did not have any problems before updating to 1.0.1. Not saying the update is the cause of the problem but its one of the variables.
Of course, this is about the Droid 3. Mine has had LauncherPro since day one.
I ran into an odd problem, and repeated it on another Droid 3, even with the new system update. I'm getting a random black screen whenever I turn the screen on from being off. It could be a few seconds, could be minutes, hours, or whenever. Slightly moving the "home screen" left or right allows it to show up.
The bottom task bar is unaffected. Any ideas on how/why this would be happening or how to fix it? I've tried various homescreen and behavior settings in LPro, but nothing has solved it.
Thanks,
yes i have this to, I think it is a gingerbread thing, cause I never had this problem on my D2, until after the gingerbread update, I also have this problem on my D3 as well.
Same here
Sent from my DROID3 using XDA App
I have this problem too but only when I exit an app.
Sent from my DROID3 using XDA App
Same sort of
I also have the dread blank screen (though it's not black, I can see the wallpaper) after exiting apps, especially camera apps, or web apps (e.g.Opera). Sometimes the homescreen stuff does flash on and off, once or more - sometimes bunches. Found that rebooting seems to restabilize things, but it is becoming more annoying over time.
Anyone out there got solution?
I usually just swipe to another home screen. That fixes it (temporarily).
the only time i have this issue is when i first turn the phone on. everything boots up, i swipe the unlock screen and get the black screen with the launcher and everything below in tact. i shift the screen a little to get it to show up and i dont see it again until the next reboot. i never see the issue while switching apps or anything like that. i have arctic grey theme if that says anything to the issue, tho it never really bothered me that much. i could see it getting annoying if it happened all the time.
This might seem like a dumb question but whenever I set my phone down and it is moved even in the slightest the Active Display lockscreen turns on. Is there anyway possible to disable that?
That's the cool thing about this phone. Don't worry about it
Chronos300 said:
This might seem like a dumb question but whenever I set my phone down and it is moved even in the slightest the Active Display lockscreen turns on. Is there anyway possible to disable that?
Click to expand...
Click to collapse
You will get used to it and come to love it. the great thing is that it doesn't adversely effect your battery, it uses the special built in processors. I thought it was weird at first but now I just tap my phone or bump the table to see my notifications.
I love it because I never have to push the power button to turn my device on. This is a great way to save wear and tear on your power button. A lot of devices that rely on one button all the time (power button) end up with that button not working anymore. If I didn't have this option I would be using my volume rocker to power up my phone.
Sent from my XT1060 using Tapatalk
This is easily my favorite feature about the Moto X. All I gotta do is pick up my phone and it automagically shows me any notifications and is ready to be unlocked. Power button? What's that?
Sent from my Nexus 5 using XDA Premium 4 mobile app
I like this feature. I usually tap my finger on the screen or press off to one side so the phone rocks slightly on the curved back to get the display to come on. As someone else said, it saves a lot of wear on the power button. I can't tell you how often I clicked my Razr Maxx on just to see what time it was, and clicked it off again immediately. The button never wore out, but it's nice not having to do it at all.
I do have a question though. I got the phone on Wednesday and didn't notice this at all until this morning, and I don't know if it's normal or not. While getting ready for work this morning I noticed the Active Display fire on and off a few times in a row. I thought since it was right at 7am that I may have gotten a few emails close together or something, and didn't worry about it.
When I got to work I set my phone on my desk and was reading emails and such and I noticed the display puling on and off about every 5-6 seconds. It fades in, holds for maybe 1 second and fades out. It only had one notification, for Plume (Twitter), which only polls every 15 minutes in the background, so I knew it wasn't getting new notifications repeatedly.
I can't remember if this was happening yesterday and I just opened it up right away to see what it was for, or if something actually changed. I disabled Plume from the Active Display list, which didn't change anything, I got the same result for email (Maildroid) and Snapchat.
I guess it kind of makes sense that it repeats, as there is no LED on the phone, but it seems a little excessive. I don't know how much power is saved by using white on black in the small area of the screen, but it's bugging me a little because I don't remember it doing this before.
Thanks for any input anyone has on this...
fury683 said:
I guess it kind of makes sense that it repeats, as there is no LED on the phone, but it seems a little excessive. I don't know how much power is saved by using white on black in the small area of the screen, but it's bugging me a little because I don't remember it doing this before.
Click to expand...
Click to collapse
It's normal. When you have a notification, the screen pulses instead of having a notification LED.
I haven't measured it, but it's my impression that it slows down the pulsing if the phone sits quietly for a while after the notification happens (I seem to notice that, if I ignore the notification, I don't see it as much). It really uses almost no battery, though, so don't worry about it.
Does the phone always light up when driving? I don't remember it happening on my old X but it's lights up at every bump on my new X.
Thinking I've frozen something I shouldn't have. Did not use assist on either phone.
binary visions said:
It's normal. When you have a notification, the screen pulses instead of having a notification LED.
I haven't measured it, but it's my impression that it slows down the pulsing if the phone sits quietly for a while after the notification happens (I seem to notice that, if I ignore the notification, I don't see it as much). It really uses almost no battery, though, so don't worry about it.
Click to expand...
Click to collapse
Thanks for the quick reply. I'm guessing yesterday I either cleared them quickly, or they were present long enough to go slower and I didn't notice the repetition.
I will have to play around with what I actually want notifications for. Plume (Twitter) is the worst, followed by email. I wish I could turn on different channels for Plume so that Mentions/DMs could go to Active Display, but regular tweets didn't, but still have it do all in the notification shade. I might have to just settle for not getting a notification for all new tweets. Or increase my poll time...
Email might get shut off too. I get too much spam to care, and rarely get any emails that are urgent enough to warrant it.
Yes, mine lights up when driving Lol. The second I press on the gas it lights up, tripped me out the first few days owning the device, but I'm used to it now.
Sent from my XT1058 using xda app-developers app