Database Develop

No Sound

I have no sound whats so ever?
I think i know the answer to my problem - i'm just not sure how to fix it.
Basically part of my headset is stuck in the headset port. It's the little tiny tip section of the jack end. I think the phone thinks there is a headset plugged in and thats why the speaker is not working - also when taking calls i cant hear the other person and they cant hear me.
Problem is, what do i do about it? It's an awful small jack fitting in the first place - never mind trying to get the smallest part out of that hole?
Any idea's? I want to avoid returning the phone to O2 because when they last had it (the touch screen stopped working) it took 4 weeks before i got it back and I need the phone for GPS everyday!

OOooooo errrr.
Thats got to be the worst of luck.
I can only siggest two possible things to do and they're nasty, very nasty!
1. Get a cocktail stick and dip the smallest possible amount of SuperGlue on the end(and I mean the smallest dribble.) Infact put a drop on a ceramic tile and dip the cocktail stick into it for a really small amount. Then insert and hold for a few minutes. You may have enough bond to ease out the remains.
2. If you dont use the jack you could shove a nail in there and gently wiggle if for quite a while to break the solder points carefuly and then pull the jack off, thus disconnecting the headset.
Sounds rough and nasty but thats what I'd do and then if it failed I'd put the jack on the remaining headset and send it back to O2 for replacement.

X1 3.5mm socket broke my headphone jack :(

Hi,
Wanted to ask if this was a common problem. The 3.5mm socket on my Xperia has worn two pretty significant grooves into my headphone jack. It's now so bad that the right channel doesn't work half the time. The problem persists when I use the headphones in other devices to it's definitely managed to damage the heaphone jack.
I experimented with the included microphone lead and it has also managed to scar that a little so I immediately stopped using it.
Has anyone else encountered this problem? FYI the headphones are AKG K414P.
Thanks
Tome

The socket sucks. It ALMOST broke my in-ear headphone's jack. It's too tight.

yeah the socket is really tight on mine as well, haven't streaked any headphones yet though, maybe I haven't used them enough?

I have something like this. I think I have the same problem.

It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/

dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
That's what happened to me. Be sure to grab that rubber very tightly.

ksian said:
I have something like this. I think I have the same problem.
Click to expand...
Click to collapse
Same problem here, i think this is a common problem on all XPERIA. The socket is too damn tight.

Anyway once you know that you start taking care and you won't break anything. And it's clearly an advantage that it's so tight, if you're using big headphones and your X1 slips out of your hand, it won't touch the ground (Assuming the cable is not too long and you ain't too small ). I like this.

I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel

tome_1 said:
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
Click to expand...
Click to collapse
I DO have BOTH problems. My plug has quite deep scratches. But no loss of audio so far. I think this will get better with time, the socket will also lose some material If your headphones are expensive and break quickly (and you absolutely want to keep your X1 as Mp3player) you might want to use a very small extension cord to avoid damage to the headphones themselves. Extensions of say 2" exist.

dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
Same thing it did to mine, killing my Creative Aurvanas's 3.5mm jack rubber housing. They still work but the rubber is loose.
Ah well, because of that I am actually looking at some Shure E530's (the Xperia is a pretty good source IMO). They have a detachable extension cord so i can use a L-plug instead of a straight plug.
Really, use L-plugs, they are a lot more durable against the tight socket. Its just because the sound is really great for a phone, hell, I bet its better than most MP3 players, else i would be very mad, killing my favourite IEM's . Very clean sound, although sensitive IEM's will hiss but that is expectable from such a 'noisy' thing like a fully packed-with-features phone.
But hey, a tight socket is better then a loose socket, or a proprietary extension cord like the HTC's.
Apart from killing my Aurvana's I still think the 3.5mm socket is High Quality Stuff. It just feels 'right' when you plug in your IEM's/headphones.

Keep in mind that you shouldn't keep the extension plugged in all the time because the phone actually detects this and routes certain sound events from the speaker to the headphones. For instance if you pick up a call with the extension plugged in but no headphones, you will not be able to hear the caller.

yeah i was thinking that i might have to make/buy a short extension to save my expensive headphones
it's like you guys are saying, the sound is good enough that i want to put good headphones on so i'll have to find a way to protect them. I wonder if the included handsfree extension is resistant to the phone's socket?

I use the stock extension. It gets scratched as well (have xperia for 2 months). As for the sound quality, I'm thinking about repairing my good old Ipod nano for listening mp3's. I do think, that it has better sound quality and more than that the battery of the phone won't die out so fast (playing music for about 2 hours a day).

Lol. Would not have noticed this without you guys. Who would look at their earphone jacks? Either they are very bored or something about their earphones is screwed up.
Does other HTC phones have these problems? Oh wait, only the THD has 3.5mm.

The jack has ground grooves into the jack on every single pair of earphones I own,and based on this alone, I'd say SE, give me my freakin money back!
Is it serious? Probably not. But is it supposed to do that? Hell no.
I don't want to use the stock extension cable, otherwise I wouldn't choose a phone with a 3.5mm jack, Jesus bleeping Christ.

I have the same problem here. I used a nokia handsfree and after 2 days I had that scratches and sometimes I couldn't here well, the sound was faded and i had to turn the jack in a certain position. Today I tried an Iphone handsfree and it doesn't work well..
I don't know why... Is it to thin? It's new but the sound is faded. I don;t get it? Has anybody tried this apple headphones? (The one with microphone, so 3 stripes on the jack)
LATER POST: I TRIED ANOTHER HEADPHONES AND THE SAME BLURED SOUND...SO I GUESS MY SOCKET IT'S SCREWED

well, then again the apple handsfree is thiner i guess, because i tried some Lg headphones and they were ok. the apple headphones are functioning conected on laptop. I don't know what to believe... I really wanted to use the apple stuff on this phone, i should buy an extender.

use your xperia handfree as an extension, have been doing that for over a year now, and even though it's scratched like hell, it works fine, without damaging my beats

Could you please tell me wich model of headphones by SE are they? I mean the x1 headphones.
I found out that iphone's 3.5mm socket is not like the others so the x1 is not like the others and maybe that;s the reason i can;t use the apple headphones.
ok...got it.."If they have a mic, then they're useless for anything but an iPhone.
Apple decided rather than follow the industry standard of Right/Left/Mic/Ground, they would make their own up. They chose to make their socket Right/Left/Ground/Mic, which means your N900 is trying to ground the headphones through the mic, which clearly will not work.
In short, they won't work on anything except an iProduct."

(HELP) xperia stuck in headset mode

its been a few months now and still no parts for my xperia so i cant get it fixed.
i have been wondering if its possible for someone to make a cab to turn off/on hardware headset jack or forcibly use handset speaker when in a call orsomething?
BTW i have tried all possible fixes using the "search feature"

Are you describing the problem where even though there is nothing plugged into the 3.5mm jack, the XPERIA thinks you've got something plugged in? If so, I'm having the same issue and have found that a quick way to fix this is to take the stylus and wiggle it about at the bottom of 3.5mm jack. This clears it up.

well yeah that worked before but my jack is kinda broken but working
some of the metal in the jack is really loose and the jack has a small broken part.

I had the same issue where my headphone jack reported that there was a constant headphone plugged in, it happened after I plugged a damaged headphone port into the phone.
It took many hours of research and a very intricate and careful dissasembly to fix the issue. I meant to take photos, but my primary camera ( my X1 ) was in pieces at the time..
Anyway, there's a little connector inside the headphone jack that makes contact with a pad, closing a circut, if the connector is bent too far out of the way, it doesn't make contact, and the phone thinks there is a headset inserted.
If your connector is actually broken, you'll have to jerry-rig a wire or something between the two plates to force it to know there's nothing in, but then you lose all headphone functions.
I had to bend the strip of copper to -exactly- how it should be, and it worked out for me, my phone is back how it used to be.
I hope this is of some help to someone, if it happens to me again, I'll document it properly, unfortunately I was in a rush this time, so I didn't have time to prepare properly, I went gung-ho and ripped it to pieces to get it right again.

what about a "software" method of fixing this problem?
doesn't windows mobile support turning headset off, from the registry, for example?
while using radio you can still redirect the sound to the main speaker, (this option is available on the radio panel) something like this feature can help us, i think..

Same problem here. I have tried some suggestion over here but didn't work. You may try it: http://forum.xda-developers.com/showthread.php?p=4485113#post4485113
I'm tired with annoying wire headset and now using a BT headset to be able make/receive calls.
Hope somebody can help us before we send back for repairing.

It happened to me, simply insert a clean "cotton buds" and pull it out again. I think, a dirt just got stuck causing some hardware short circuit or something. Don't know....but it definitely worked for me. I have tried those hardresets, softresets, tweaks and unfortunately none of them worked.

try to drain the battery and charge it back up.

Sometimes would be nice to combine some of the threads because they refer to the same problem
http://forum.xda-developers.com/showthread.php?t=529449
Anyway from my knowledge there are two reasons for this problem.
You may guess
1. Hardware:
This issue had been described very often. Of course the jack is a delicate piece of hardware, which could be damaged physically due to some bad plug or violent force.
2. Software:
It's obvious that the connection is controlled by a piece of software.
I realized that the problem had gone with the latest update.
Maybe it would be helpful to know about the firmware version you got on your phone.
P.S.: Anyone out there who may add this issue to the wiki?
scholbert

Good microphone for head units ?

Hey guys,
I bought a Chinese head unit a while back with an external microphone included, plugged with a jack. It's taped closed to the speedometer on my car, so that it's closer to my head, for better sound strength. The cable isn't in the way either, which is nice.
However the result is quite bad, with lots of noise, and I'm forced to speak rather loudly so that my interlocutor might hear me.
Is there anyone with an external microphone like me that is satisfied of it's performances ? Something with noise reduction maybe ?? It might be good to have a system that would remove the engine noise as well as the sound of my interlocutor voice through the speakers... not sure it's available or efficient though. I'm not willing to spend more than 30$ on this.
Also, I don't want any Bluetooth stuff. Cables only.
So far, this is what I found that might work. But I doubt the quality of the sound is that great :
https://www.amazon.com/Bluetooth-Receiver-Adapter-Hands-Free-GOgroove/dp/B008XMV05G
It's Bluetooth OR wired.

Hey!!
I have the same issue.
Have you solved your issue with your new external mic?
thank you

No I didn’t buy it on the end, nothing progressed do far, sry...

I found with mine that placement was the ultimate game changer in usability. I routed mine up through the A pillar and to the headliner right above the head unit and it works flawless after having nothing but issues all over the dash and center console. I have just an average cheapo mic too.

RUGGNATION said:
I found with mine that placement was the ultimate game changer in usability. I routed mine up through the A pillar and to the headliner right above the head unit and it works flawless after having nothing but issues all over the dash and center console. I have just an average cheapo mic too.
Click to expand...
Click to collapse
After looking for the same info, the consensus for best placement I found as you describe - A pillar, headliner as the windscreen acts as a parabolic reflector. This position yielded the best results in my scenario.
The advice I found was to not place on a pillar due to wind noise etc, which I found was good advice.

Bad network quality after changing mic and usb c board

Hello,
my microphone was broken and i ordered and replaced my board with usb c and microphone, and after that my network is totaly bad. In my appartement i do not have network. After i noticed this problem i put back my original board and see there is no netowrk too, so i am now confused where can the problem be? At last i see that on the mid frame some little copper squares falled and i think there can be the problem but i dont unterstand how....
Thanks to all...

Antennas today are black stickers, sometimes connected with little copper springs, sometimes coax.
In a recent hardware restructuring of a tablet the GPS antenna was a sticker on the back of the speaker!

Renate said:
Antennas today are black stickers, sometimes connected with little copper springs, sometimes coax.
In a recent hardware restructuring of a tablet the GPS antenna was a sticker on the back of the speaker!
Click to expand...
Click to collapse
Thanks for your reply but how i dont have network after replacing this?

Maybe you ripped a sticker or bent a little copper pin. Some antennas are on the back too.