Database Develop

All messages open at end of message. Please help...

I'm using an AT&T Tilt with the default ROM, no modifications, just added software. My text and email messages are opening at the end of the message. The scrollbar is scrolled all the way down. On really long messages, like long emails, it won't be scrolled all the way to the end, but down quite a ways. Does anyone know what might be causing this, or how to fix it. Any help would be greatly appreciated. Thanks...

did ya install kaisertweak? I read somewhere on this forum that that tool is causing that problem

No, I haven't installed that. But thank you for asking. I may check those references and see if anyone with that problem has found a solution...

try this , and please let us know!
http://forum.xda-developers.com/showthread.php?t=337968&highlight=messages

That was it. Thank you for pointing me in the right direction! Your original hunch was probably correct. I haven't installed that program but I did manually edit the registry to do that tweak. I didn't even think it was relevant cause I thought it only affected PIE. Looks like I have lots more reading to do at these boards. Thanks again for your help, and quick response...

I posted this in another thread, I have the Tweak installed on my Tilt and have the 4-Way Nav already set to 1. It still does this, very annoying. Any other suggestions?

didn't work on my HTC TyTN II either the suggested registry value value was already 1. I've been fiddling with KaiserTweak earlier.

working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)

patr!k said:
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What did you do? Please do share!

TheFuzz,
just follow this hint

patr!k said:
TheFuzz,
just follow this hint
Click to expand...
Click to collapse
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.

TheFuzz said:
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
Click to expand...
Click to collapse
Same here. Did you find anything?

jahnotto said:
Same here. Did you find anything?
Click to expand...
Click to collapse
Nothing new, so I use Pocket CM now to do my texting, works much better anyways and has threaded messaging!

att startup screen on tilt

how do you get rid of the att/3g on startup on a tilt?

ill add a question to that
or can someone tell me how to get rid of the sound

I'm also new here, but you guys are about to get nailed for not using the search for this question.... Hold on and take it like a man...

DSmithZ28 said:
I'm also new here, but you guys are about to get nailed for not using the search for this question.... Hold on and take it like a man...
Click to expand...
Click to collapse
hahaha you are sooooo correct...they definitely should have used the search because its there...in fact, I already answered the sound issue...PLEASE search the site using google and i guarantee youll find what youre looking for if its there...here is your one freebie...http://forum.xda-developers.com/showthread.php?p=1595539

Doug2873 said:
hahaha you are sooooo correct...they definitely should have used the search because its there...in fact, I already answered the sound issue...PLEASE search the site using google and i guarantee youll find what youre looking for if its there...here is your one freebie...http://forum.xda-developers.com/showthread.php?p=1595539
Click to expand...
Click to collapse
Doug,
Thanks a bunch for this tip! I was wondering the other day if it was possible to silence that annoying sound. Much appreciated!
Thanks.

Didn't someone make a thread... and a MOD made it a STICKY just for ATT TILT NEWBIES? I know pressing a search button and typing a key word into a box is difficult, but there is also a sticky just FOR YOU.
I think you should have to take some type of IQ test before having a TILT.
(This is actually more of a universal question, but...) How do I disable the annoying ass AT&T animation at startup?
You need a mobile registry editor to do this:
go to HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation
just set the "enabled" value to 0 and that will get rid of THE most annoying startup animation/sound ever (thanks to myself)
GO HERE
The thread to address ALL TILT-specific questions It was made JUST FOR you:
http://forum.xda-developers.com/showthread.php?t=341024

May not be my place...
Some of you are a bit harsh. This is a forum and it is here for a purpose; supposedly for seeking help.
Thanks Doug - I didn't know about that tweak either.
For those who use KaiserTweak you can add this to your XML file instead of using a registry editor:
<tweak>
<title>ATT Startup Animation</title>
<value disabled="disabled" advised="advised" value="0">Disabled</value>
<value default="default" value="1">Enabled</value>
<key>HKLM\Software\HTC\StartupAnimation\Enabled</key>
<description>Enable or disable the ATT startup animation.</description>
</tweak>
Click to expand...
Click to collapse

DSmithZ28 said:
I'm also new here, but you guys are about to get nailed for not using the search for this question.... Hold on and take it like a man...
Click to expand...
Click to collapse
LOL!!!! Well put.

grizzley said:
Didn't someone make a thread... and a MOD made it a STICKY just for ATT TILT NEWBIES? I know pressing a search button and typing a key word into a box is difficult, but there is also a sticky just FOR YOU.
I think you should have to take some type of IQ test before having a TILT.
(This is actually more of a universal question, but...) How do I disable the annoying ass AT&T animation at startup?
You need a mobile registry editor to do this:
go to HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation
just set the "enabled" value to 0 and that will get rid of THE most annoying startup animation/sound ever (thanks to myself)
GO HERE
The thread to address ALL TILT-specific questions It was made JUST FOR you:
http://forum.xda-developers.com/showthread.php?t=341024
Click to expand...
Click to collapse
no excuses. i should have known better, but thanks all for the help.

Haptic Feedback?

Does anyone know how i can enable haptic / vibration feedback for virtual keys while SMS or Email?
TIA!

up? is possible?

I don't think it is possible. Haptic was included in test versions of the Diamond but poor user receptiveness meant that it was taken out of the final build. I've had a dig in the registry and can't find anything that hints it's still there but you never know there are some clever people here!

I have haptic feedback in the dialer dialpad. It works great

@mooooooa
what are the steps in order to get that?

SecureGSM said:
@mooooooa
what are the steps in order to get that?
Click to expand...
Click to collapse
I second that!

For the dialpad, it should be the same reg edits as for any WM5/6 phone. Do a search for DTMF or VIBRATE in the Kaiser forum, and you'll find it.

I have a feeling he's using a 3rd party app...

View attachment phonepadvibratewm6.cab

I tried this and find the vibrate to be too strong. Instead, does anyone know how to enable the feedback which happens in Teeter, the 'bump' you feel when the ball hits an object?
DT

@daren1
v0.15w0.15v0.15w0.15.
vibrate for 0.15s, wait for 0.15s, vibrate for 0.15s, wait for 0.15s.
replacing *vibrate* with combination as per above. soft reset might be required.
not sure if that one works. should provide softer vibration if works.

SecureGSM said:
@daren1
v0.15w0.15v0.15w0.15.
vibrate for 0.15s, wait for 0.15s, vibrate for 0.15s, wait for 0.15s.
replacing *vibrate* with combination as per above. soft reset might be required.
not sure if that one works. should provide softer vibration if works.
Click to expand...
Click to collapse
This did not work. After modifying the registry as you directed, there was no vibration at all. If you have any other suggestions, let me know and I will give it a try.
Thanks for your time.
DT

mooooooa said:
View attachment 96383
Click to expand...
Click to collapse
Works great
But how can I uninstall it? It's not appear in the installed programs list...

daren1 said:
I tried this and find the vibrate to be too strong. Instead, does anyone know how to enable the feedback which happens in Teeter, the 'bump' you feel when the ball hits an object?
DT
Click to expand...
Click to collapse
Excellent idea! I'd really love that

pedmond said:
Excellent idea! I'd really love that
Click to expand...
Click to collapse
Second that...

me too!!!!

Please guys
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.

sgbmad said:
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.
Click to expand...
Click to collapse
I believe it doesn't install any files, it's just a reg tweak, so the only way to "uninstall" is to return these registry keys back to their default values. You might wanna do a search in the kaiser forum, but I'm not sure of that.

sgbmad said:
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.
Click to expand...
Click to collapse
You can change them back without manually editting the registry. Just go to Start > Settings > Phone, and change the Kepyad tones to 'None', press OK, then reselect your preferred (None, Long or Short)
Hope this helps

@mcwtrekkie, slicker:Thank you very much

How to automatically detect if "Optical Pad Mode" is enabled?

Hello,
I was wondering if anyone had an idea on how to tell if the optical pad is currently enabled on the Xperia X1 programmatically? Is there a registry setting somewhere that shows the current mode (D-Pad or Optical)?
...I actually don't have an X1 at the moment, otherwise I would have have been able to investigate this more. I've checked through the xda forums and on Google and haven't found any hints on this.
Hopefully, someone has already come across this setting and will be able to point me in the right direction?
Also, a second question... does anyone have any thoughts on how to detect whether the current device is an "Xperia X1"? I'm guessing there would be a registry setting for this.
Thank you -- any information would be very much appreciated.

I know for one that the device info is a .txt document in the windows folder. I have no idea about the D-pad though. I can't imagine you'd be able to tell through the registry, as modes aren't usually controlled through the registry - which is rather used for fixed variables. I think only the driver "knows" the current status. Won't be easy to extract.

Angelusz said:
I know for one that the device info is a .txt document in the windows folder. I have no idea about the D-pad though. I can't imagine you'd be able to tell through the registry, as modes aren't usually controlled through the registry - which is rather used for fixed variables. I think only the driver "knows" the current status. Won't be easy to extract.
Click to expand...
Click to collapse
Thank you for your prompt response Angelusz. Do you happen to recall the name of the .txt file with the device info?
As for the location of the optical/d-pad mode setting, I actually wouldn't be at all surprised if they stored it in the registry. The setting has to be stored on the system somewhere, and the registry is as good a place as any.
(Sometimes, it's actually beneficial to store things in the registry since then you don't have to worry about creating your own custom file format, or writing file read/write classes.)
Anyone willing to check the registry for such a setting? Or perhaps do a search using the Remote Registry Editor ("Edit->Find")? Maybe a search for "optical" or something?
I'd probably assume that there would be something stored in "HKEY_LOCAL_MACHINE\Drivers"...
Really, any help with this would be great.
Thanks again.

ModelName.txt - it just sais X1i - or X1a if it's an X1a ofc.
I searched the registry for "dpad" - no results.
Checked HKLM/Drivers - no results.
I still think I'm right.

Angelusz said:
ModelName.txt - it just sais X1i - or X1a if it's an X1a ofc.
I searched the registry for "dpad" - no results.
Checked HKLM/Drivers - no results.
I still think I'm right.
Click to expand...
Click to collapse
Thanks for the additional info on the filename and it's contents. So, (just to confirm) the only thing in that file is "X1i" or "X1a"? Or would I have to parse for anything else in there?
Also, thank you very much for doing that search, much appreciated!
Hehe... well, I'm not saying that I'm 100% sure you're wrong, but it wouldn't surprise me if you were ...I'm just saying that the driver has to look somewhere to see whether the optical pad is enabled or not.
They can either use a file or the registry, that's pretty much it. Otherwise a soft-reset or battery drain would cause that setting to be reset.
Okay, one more request, if you don't mind.
Would you (or anyone) be willing to do a registry search for the term "optical" with "Values" and "Keys" checked, in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE?
I realize that this is a lot to ask, so please feel free to say no. In any case, I really do appreciate all of the time you've spent on this so far.
Thanks again for all of your help!

----------

it is under settings, there you can see the optical pad icon to change the settings.
you can put it on/off and there is a option if you want to use it in ie (internet explorer) and you can adjust the sensitivity.
peace to all
p.s. sorry for my useless english i am from hollan

EGMine said:
Thanks for the additional info on the filename and it's contents. So, (just to confirm) the only thing in that file is "X1i" or "X1a"? Or would I have to parse for anything else in there?
Also, thank you very much for doing that search, much appreciated!
Hehe... well, I'm not saying that I'm 100% sure you're wrong, but it wouldn't surprise me if you were ...I'm just saying that the driver has to look somewhere to see whether the optical pad is enabled or not.
They can either use a file or the registry, that's pretty much it. Otherwise a soft-reset or battery drain would cause that setting to be reset.
Okay, one more request, if you don't mind.
Would you (or anyone) be willing to do a registry search for the term "optical" with "Values" and "Keys" checked, in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE?
I realize that this is a lot to ask, so please feel free to say no. In any case, I really do appreciate all of the time you've spent on this so far.
Thanks again for all of your help!
Click to expand...
Click to collapse
Yes, just X1i or X1a.
That finds some settings, just some strings. A filename, OpticalJoystick_Setings.exe (the app below post describes) and that's it.
gizmo1908 said:
it is under settings, there you can see the optical pad icon to change the settings.
you can put it on/off and there is a option if you want to use it in ie (internet explorer) and you can adjust the sensitivity.
peace to all
p.s. sorry for my useless english i am from hollan
Click to expand...
Click to collapse
That was not his question.

Angelusz said:
Yes, just X1i or X1a.
That finds some settings, just some strings. A filename, OpticalJoystick_Setings.exe (the app below post describes) and that's it.
Click to expand...
Click to collapse
Wow, sorry about the super-delayed response - I didn't see a notification of any new posts come into my email...
Anyway, thank you very much for confirming the data in the text file, Angelusz; and for running the additional registry search. This is very useful and I thank you deeply for taking the time to look into all of this stuff for me!
blackice168: Thank you for your post as well... I saw what you wrote before you deleted it and it was actually quite helpful since I didn't know that about the X1. Turns out that I was asking the wrong question... heh
gizmo1908: Thank you also for your post; and don't worry, your english is actually quite good!
Based on the various posts I now know what to do with the X1; so thanks again everyone!

Thirteen "not obvious" questions about using X1i

Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!

Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list

PhoneX can do these two.

WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)

BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.

J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer

orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.

WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.

Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe

spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.

orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.

orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.

WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .

J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??

orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager

J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.

orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...

J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!

If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?

VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer