Internet Sharing over Wifi, New all in one program! - Tilt, TyTN II, MDA Vario III General

Thanks to Chainfire we have a new all in one program that lets you use ICS via wifi to tether ! You can turn your phone into a wireless router!
Here it is, please read this first - new version 0.6
Here is the Info about everything you need to know
Once again thank you Chainfire

Turning off nat??
Is there a way to do the wifi teathering without nat? A better way to put it is, would there be a way to set a dmz for one computer associated to the phone?
The reason I ask is back in the day with a older htc phone the dun tethering would give my actual edge ip to my tethered computer and there were so many neat things I could do since my provider actually was assigning me a public ip address.
A response to this is appreciated!

Related

Internet Sharing via wifi

Hi there
My Laptop does not have wireless and I am trying to use my Touch Diamond to connect to the wireless at uni so that I can browse the internet on my laptop at uni. I am having two problems figuring this out.
I can connect to the wireless on my diamond at uni to the work connection like the instructions tell me to. But I cannot seem to use this connection to browse the internet. I am not sure what I am doing wrong.
The next issue I have is that if I start the internet sharing tool I only have two options for the connection to share. The first is Telstra internet and the second is Telstra MMS I do not want to use these connections as i am on prepaid and all my credit would be gone in less than a minute.
I hope someone can give me some ideas as to what I am missing in this setup.
Thanks
Telstra Internet
I have now set the internet connection back to telstra but it doesn't want to load the telstra home page anymore. That is why I gave up last time. I wish I could use wifi when I have it and browse the free sites when I don't Telstra is very annoying.
Information
Hello, soon im gonna write a small guide as to how to use your phone incondunction with a router to allow all devices connected to the router to connect via the mobile phones internet connection. I understand that this is not what your askings as from my experence you will not be able to what your are asking. But if you have a unlimited data allowence then this would be a good option.
you need a router
you need wireless on your laptop (dongle/built in)
and some minor knowledge on setting up networks manually
keep your eyes out for the thread.
regards Vic
stretch4x4 said:
Hi there
My Laptop does not have wireless and I am trying to use my Touch Diamond to connect to the wireless at uni so that I can browse the internet on my laptop at uni. I am having two problems figuring this out.
I can connect to the wireless on my diamond at uni to the work connection like the instructions tell me to. But I cannot seem to use this connection to browse the internet. I am not sure what I am doing wrong.
The next issue I have is that if I start the internet sharing tool I only have two options for the connection to share. The first is Telstra internet and the second is Telstra MMS I do not want to use these connections as i am on prepaid and all my credit would be gone in less than a minute.
I hope someone can give me some ideas as to what I am missing in this setup.
Thanks
Click to expand...
Click to collapse
try to use wmwifirouter - it can use phones wireless and BT/USB connection to pc it will be a router for pc
Unsure
Thanks for your ideas although I might not have made myself clear.
The laptop does not have wireless. And I do not want to use the data connection on my phone as that will cost a fortune.
I wanted to get my phone to connect to the uniwireless and then allow my laptop to connect to the uni wireless for free internet via the phone.
I think I might just give up and buy a usb adaptor for the laptop.
Cheers
wmwifirouter does this !
Thanks
Oh ok, well I would have a look but i don't want to pay for it so im not going to try, especially as every time i have touched my network setup my free browsing stops working.
Thanks

GUIDE! your diamond or other wm6.1 device as the main internet access via your router

Hello This guide is made up from the knowledge i have build up from advice given on XDA and information on other sites.
I have found this very useful in my home and hope you do to.
First off, this guide explains everything you need to do to use your diamond as the access point to the internet at home for all devices. (PC's, PS3, XBOX360, Wii)
It is highly recommended that you have a unlimited data allowance!!!!! Otherwise you could have a hefty bill at the end of the month.
Right what you will need :
A Diamond with an unlimited data allowance tariff,
A WiFi router (i have used an old router that was installed with Tiscali BB)
WMWifiRouter version 0.80 (please find this your self i will not provide it)
and some basic knowledge of networking on PC's and your devices.
Thats it. Please don't be put off by the networking side of things its really easy to do.
Right first off we need to get your diamond taking to your router.
switch on your router and let it do its thing for 2-4 mins
Connect your diamond to the wifi router by switching on your wifi in settings, communications on touchflow, when prompted, connect to your router and enter your network key.
THIS IS THE SAME PROCESS AS CONNECTING TO A WIFI HOTSPOT.
Its that simple.
Next switch off your wifi in settings, communications.
Install WMWifiRouter version 0.80 (Simple and stable)
once installed open WMWifiRouter and press connect.
This should then setup your phone to be used as a access point and connect to your wireless network all at once.
Once it says connected you can turn off your phones main screen by pressing the off switch at the top and put your phone where there is best signal! HSDPA is needed to get up 7.2mbps (little H in signal area)
Right now you need to setup your laptop or device to talk to the phone via your router!
So here are the settings you need to setup in either TCP/IP (manual connection) or a manual connection on your device (PS3, Wii, XBOX360).
I will use a laptops connection as a example because all you need to do is to copy the settings to another device using a different IP address.
If you use wifi or a hardwired connection, right click the telly with the wifi connection in the bottom right of the screen and click open network connections (XP only dont know for vista), Or if the telly is not displayed in the bottom righthand cornner of the task bar then click start, control panel, network connections.
Click on the connection you wish to use i.e local area connection or wireless network connection (you can setup both connections by repeating these steps on each connection)
this should bring up a general tab of this connection, click properties.
This will bring up another box with the network properties, all you need to do is manually enter your IP settings and DNS settings so double click on "internet protocol [TCP/IP]"
Another box appears.
Click "use the following IP address"
In IP address type "192.168.0.xxx" xxx being the unique 3 digit code of your choice, write this down for your firewall settings on other devices if you run a networked drive etc. Each new device will need its own unique 3 digit code ie PC = 192.168.0.100, XBOX360 = 192.168.0.200, Wii = 192.168.0.123 etc.
In Subnet mask type "255.255.255.0"
In Default gate way type "192.168.0.1
Now click "Use the following DNS server address"
In preferred DNS server type "192.168.0.1"
Thats it, press ok and ok on any other boxes still left open.
Your network device will rest your IP and DNS settings to the ones you have just entered, thus allowing you computer to access the mobiles phones internet connection via your router
On all your devices Manually setup all your connections using these settings and they will all use your mobile phone to connect to the internet.
Using DHCP to configure your network is not advised as its unreliable at finding your phones connection.
Now if you want to start using your phone as a phone again, open up WMWifiRouter again if its not already and click options Quit.
To get internet access on other devices via your phone again all you need to do is to start WMWifiRouter and press connect. Start using the internet!!!
If you wish to use your laptop on another hotspot, you will need to reset the TCP/IP settings back to automatic, otherwise it will not work.
Using this process sometimes causes the phone to disable its own internet connection, so a soft reset after exiting WMWifiRouter is recommended.
Have fun, im sorry if its all a little messy but i have never been very good at writing these guides.
If any modd wants to add or edit this post then please feel free. any persons wanting to add to this guide please do so.
Yes i know you can connect your phone to your laptop by USB, Bluetooth, but this method allows multiple devices to use the same phone to access the internet at the same time and via a access point at the highest possible speed, so games consoles can use it!!! Brilliant if you get a good HSDPA signal and live in the country.
Oh one last thing! if you are a youngster and wish to try this, please do so on other equipment, don't use your family's main router and laptop or PC unless its no longer in use!!!
Thank You
i haven't tried it myself but thanks for posting the guide.
Cheers
Thanks for reading
Its does work, In my home i no longer have a land line or cable broadband i just have one bill a month which is my phone bill of £41 including insurance on my device and i get every thing, i have saved my self a fortune per year doing this, that was my reason anyway hehe L8rs
mgs333 said:
i haven't tried it myself but thanks for posting the guide.
Click to expand...
Click to collapse
I also havent tired it because i have broadband at home, but i am moving out soon and so will have a period of time where i have no internet so will use this guide.
Cheers for writing it up. My networking knowledge is above basic and all your steps made sense - good work
:>
Thank you good luck with the move
kaos_king said:
I also havent tired it because i have broadband at home, but i am moving out soon and so will have a period of time where i have no internet so will use this guide.
Cheers for writing it up. My networking knowledge is above basic and all your steps made sense - good work
Click to expand...
Click to collapse
kaos_king said:
I also havent tired it because i have broadband at home, but i am moving out soon and so will have a period of time where i have no internet so will use this guide.
Cheers for writing it up. My networking knowledge is above basic and all your steps made sense - good work
Click to expand...
Click to collapse
Because the data going through the phone will really heat up the phone, as a side benefit you'll be able to use it as both a heater, and a stove until your appliances are hooked up.
Just how many torrents does it take to boil 1 cup of water?
I tried out wmwifirouter with my laptop and I must say it's quite slow compared to connecting the phone with USB and using internet sharing, any clue why? Nice guide btw, will be used when needed
:>
your are correct, if you use WMWfiRouter directly with with your computer it does seem slow and you also get a lot of drop outs as well for that reason i stopped using months ago and was using bluetooth edr. But using this method respose times are much much quicker (to be honest i dont know why) and it is just as fast as using with USB, i know i have tested it. Im on orange UK, i get constant 1.6mbps down and 360kbps up with two bars connected the HSDPA network.
Im using it right now to reply to this thread, i got rid of my land lane and broadband connection because this is that stable and fast!
As for heating issues (poster above) once its connected and you turn off the screen, i have never had a issue. i even keep it in its HTC pouch in case it falls of the shelf its on lol.
The only problem i have come across which is more of a annoyance than anything is that when someone phones you it can slow your connection not always though, a soft reset fixes the issue.
Any more questions feel free.
chribruu said:
I tried out wmwifirouter with my laptop and I must say it's quite slow compared to connecting the phone with USB and using internet sharing, any clue why? Nice guide btw, will be used when needed
Click to expand...
Click to collapse

Reverse tethering?

Quick question; is there any way to do a reverse tethering session?
Problem is that 3g is blocked on my works sim. Also when I am in the office my phone can't logon to the wifi network.
So I want to create an internet connection via my laptop, to check my private mail on my Nexus, it's more discrete
thanks in advance for any suggestions
There's software that turn your laptop into a wi-fi router. Use that and then connect your phone to the laptop "virtual router".
Its been discussed on this forum before but seems to be a dead end --> http://forum.xda-developers.com/showthread.php?t=613038
also: http://forum.xda-developers.com/showthread.php?t=637534
another:
http://elmurod.net/wps/?cat=29
Thierry Parent has put up a working solution here ...
http://www.codeproject.com/KB/android/UsbPortForwarding.aspx
Worked great for me !
Cheers,
Vikram.

AdHoc Network Creation

Folks at XDA, for so long now I have been in awe of your expertise and today I must pick your brains....
I have HTC Portal on my Hero, and as I am getting a little sick of the tiny keyboard for texting etc, was wondering if it were possible to:
Create an Ad-Hoc network on the phone, connect my iPad to it, and use HTC Portal to send messages etc without removing the phone from my bag.
I have wireless tether for when i want to share my Data connection with the Pad, but what about the other way around?
When it was connected like this, i wouldnt be interested in any internet transfer, just a link....
any ideas? ive had a google about but with no joy
not sure if this would work but try this
thats the software that ive got, but i want to create an adhoc network so i can tether the phone to the ipad and control it without a router..... it seems there isnt a way to create an ad-hoc network with the phone

[Q] USB Tether Passthrough

Well, I've done some digging around and can't really find anything specific so I thought I'd ask..
The stock USB tethering built-in to Froyo & GB.. I was wondering if it was possible to use it for, let's say VNC?
I tried to connect in to a computer that was tethered to my phone using VNC.. But it didn't work, connecting out seems to be just fine but using my phone's internet to HOST the connection wasn't workin..
It's probably a Tmo port thing, but I was just curious if it was controlled with the app itself?
its most likely the way the tethering works, it sort of makes the phone act as a router at home works, it acts as the central point to your modem and then assigns everything behind it in its own network its own address. if you check the ip of the pc that is connected to your phone youre probably going to show 192.168 something. whatever tethering method youre using would need to incorporate some sort of port forwarding so you can direct the vnc traffic to the pc that is tethered to the phone. i use my phone to tether a bit while im out on the road and as you say, i can remote out a lot and quite freely, i cant see really if this would be reliable at all to connect into the pc that is tethered since the cell networks can go in and out and will probably pretty frequently change the ip address of the phone. ive never really kept track of my phones cell network ip...

Categories

Resources