Related
bit of a problem here... my pc crashed and i'm forced to use a new one... after connecting my BA using the cradle, my pc recognized the new hardware but was not able to install the driver for RNDIS BA... tried using the companion cd but the driver is not included there... already googled for it on windows.com and any other site i can think of but still cant locate it. d/led from ms.com the RNDIS USB kit 2005 but have no idea how to use it, the driver is not also in there. btw, the pc i'm using is not yet on SP2 so AS 3.2 is installed here.
so i used a laptop, upgraded to [email protected] and was able to install AS 4.2. connected my BA there and still cannot install the RNDIS for BA on laptop also... how come? do i have to downgrade first to 2003 so that it can be installed then upgrade back to wm5? hope someone can help me, or at least point me in the correct direction. thanks
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
GiNkAnO said:
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
Click to expand...
Click to collapse
actually the pop up window will say there is a problem with your hardware and it is not installed and your new hardware will not work properly... not sure why, i didn't change anything in my BA...
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
still can't fix the problem... FOund new hardware wizard says hardware not installed because wizard cant find the necessary software. will try it out later when the laptop comes home... whay puzzles me is that this never happened before.
hi
istall this driver
hi i miss the attachments..try dis one
meehaa said:
hi i miss the attachments..try dis one
Click to expand...
Click to collapse
thanks meehaa, i downloaded that file but when i try to redirect the wizard to where the .sys file is, it won't recognize the file...
also tried to direct the wizard on all folders inside c:\windows hoping to get lucky but still no dice...
is it the device itself that has the problem? i can easily downgrade to 2003se and upgrade but since i'm not sure it will work, i'll just screw myself
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
meehaa said:
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
Click to expand...
Click to collapse
sorry for the late reply... but after posting my last msg i got pissed off and reformatted the pc.. thank goodness there's such a thing as norton ghost after SP2 upgrade the pc was finally able to recognize the BA. but thanks for your help meehaa, i'll try your fix on the laptop since i have the same problem there. hopefully that will fix it without needing a reformat
Windows XP Generic RNDIS Driver
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
Thanks for the tip... It works great!
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment ActivSync4.5setup.rar
izulthea said:
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment 476500
Click to expand...
Click to collapse
Are these drivers you are looking for...
When I run the wizard update for rom or radio or anything it says one of two things on my pc, 1. that there is a connection error and or 2. That the program needs to close because it says so. Im sure there is a simple fix to this issue but i just dont know it.
Thanks
I think I know why
After reading through the posts I discovered why I am having so much trouble. Reason being last week I upgraded to Vista, which would explain alot.
Anyone know a way arround this problem?
irishmatt12 said:
Anyone know a way arround this problem?
Click to expand...
Click to collapse
Downgrade to XP...
There are lots of issues with the rom updater and Vista. Unfortunately until a new version of the rom update utility comes out (or some other new method) its going to be an issue.
Not only RUU, WMDC itself sometimes get problems in Vista.
When I connect the Wizard to PC, sometimes WMDC does not show up, and the PPC is not present in My Computer, and you will see a yello exclamation in device manager!
The only thing I can do is to remove the device complete from device manager and let it detects again, then I can use it again for several times.
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!
I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.
hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.
Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.
I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.
have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone
Hi there,
I don't know anything about installing fonts or whatever, I have a HTC Touch Diamond 2 with Windows Mobile 6.5 I guess..
But I can't see any chinese characters its all blocks.. can anyones help me or explain me in simple way/steps how to do it or with printscreen or anythings else so I will understand easier..
Thank you!
same problem, using the Energy roms, I USE to use CE STAR, and it worked fine for other 6.5 roms such as Dutty, Tess, but iuno why donest work for energy roms,,, any help??
try this...
There is a chinese font that you can install i have a topaz with windows 6.5 and it works fine, but i don't need it because i have a singapore phone i'll upload it. let me know if it works for you. if all else fails go check out zta4 v 2.8 it is chinese input but it eliminates xt9.
for tianzhi: if you are unsure how to install...sync your phone with your computer. open up "my computer" and select my windows mobile device and find a place that you can easily remember to transfer the cab file. then on your phone go to file explorer and find the place you put the cab and then open the cab file. it will ask you where you want to install, select it then wait a few moments for it to install. after its done soft reset your phone and your chinese characters will not have a problem at least on stock devices or officially upgraded devices through htc. i am not sure about cooked roms.
Woaaah!!! thank youu!!
it works great!! =)
iTianZhi said:
Woaaah!!! thank youu!!
it works great!! =)
Click to expand...
Click to collapse
Glad it worked for you.
itianzhi said:
hi there,
i don't know anything about installing fonts or whatever, i have a htc touch diamond 2 with windows mobile 6.5 i guess..
But i can't see any chinese characters its all blocks.. Can anyones help me or explain me in simple way/steps how to do it or with printscreen or anythings else so i will understand easier..
Thank you!
Click to expand...
Click to collapse
刷中文的系统啊·哈哈哈·看不懂的我话请google翻译·中文是我的母语不想用英文回答
zeta1988 said:
刷中文的系统啊·哈哈哈·看不懂的我话请google翻译·中文是我的母语不想用英文回答
Click to expand...
Click to collapse
那就不要用英文吧， 好像我们都会中文。就不是我的母语！哈哈 其实安装手机输入法更好，但是有时候那个输入法不会自动的安装字。
whtguitarguy said:
There is a chinese font that you can install i have a topaz with windows 6.5 and it works fine, but i don't need it because i have a singapore phone i'll upload it. let me know if it works for you. if all else fails go check out zta4 v 2.8 it is chinese input but it eliminates xt9.
for tianzhi: if you are unsure how to install...sync your phone with your computer. open up "my computer" and select my windows mobile device and find a place that you can easily remember to transfer the cab file. then on your phone go to file explorer and find the place you put the cab and then open the cab file. it will ask you where you want to install, select it then wait a few moments for it to install. after its done soft reset your phone and your chinese characters will not have a problem at least on stock devices or officially upgraded devices through htc. i am not sure about cooked roms.
Click to expand...
Click to collapse
TY soo muchh =]]]
楼主，这个对Energy的Rom适用么？一直想用Energy但是乱码.
能不能回答我一下。还是乱码。
我用的rickymsyh6.0full还加了个chinese_support(No_Font)的程序，现在能凑合着用，乱码出现的情况不多