I've been trying to map the back button (delete key) on my hardware keyboard to my OK key so that I can navigate one-handed in PIE using my scroll wheel and my OK key. I'm using AE Button Plus, and I'm trying to use VJkeypress to map the virtual keypress for this event.
However, the virtual key 08 isn't working.
I have a .lnk file with 52#"\Program Files\vijay555\VJKeyPress\VJKeyPress.exe" 08 and it doesn't work. If I change it to 91 then I can get the start menu to pop up.
Is there a different set of virtual keys for WM6?
I currently have a long press of my OK key to the left softkey, and this allows me to navigate back, but I can't use it in fullscreen mode in PIE.
Anyone have any ideas?
I wrote this short MortScript and then mapped it to the side OK button (just take the .txt extension off). If you're in PIE, it presses the back button. If you're in any other application, it clicks on the "X" in the top right. That way I can use the left-side controls in PIE. Hope this helps.
Thanks for the script. However, it doesn't work in PIE if you use full screen, which was the same issue I was having just mapping the left soft key to the OK key.
Is there a way to simulate a keyboard press (backspace) in Mortscript instead?
Try the command "SendBackspace" (without the quotes). I think that will do it.
Related
Only two buttons are available to be re-difined. Can't be register hack way to Re-defined OK button? Or add more buttons into selected key.
ukukuk said:
Only two buttons are available to be re-difined. Can't be register hack way to Re-defined OK button? Or add more buttons into selected key.
Click to expand...
Click to collapse
I think have three buttons
I am using AE Button Plus. UI is not that intuitive, and it's not free, but it allows OK button remapping (among others.) Here are my button functions:
Voice speed dial button: 1 press: Run App (Fullscreen Keyboard), 2 presses: Run App (Photo Contacts), 3 presses, Run App (AE Button Plus), Press and hold: Rotate Screen (Can rotate in any of four orientations)
Camera button: 1 press: M$ Voice Command, 2 presses: Camera, 3 presses: CorePlayer, Press and Hold: Xn ViewPocket (photo viewer)
OK button: 1 press: Close App, 2 Presses: Switch App, 3 presses: Soft Reset, Press and Hold: (doesn't seem to work)
Left soft key: 1 press: Left softkey (but mapped to WMP on today screen through Tweaks2K2), 2 presses: TomTom 6, 3 presses: Resco File Explorer, Press and Hold: StarCaddy (I'm a golfer)
Right Soft Key: Could remap all, but "Right Soft Key" command within AE ButtonPlus doesn't seem to work and I don't want to loose that button's soft key functionality. So I've left that one alone.
Start Menu Key: AE button plus cannot seem to add both the OK button and the Start Menu key at the same time - so this one is not touched either.
It also doesn't seem to play nice with CorePlayer: AE dominates and doesn't let other programs remap while they are open. I'm adjusting though.
Hope this helps. I've tried other mappers (VITO didn't work at all for me, and Double Launcher limited me to only 2 buttons) and this is the best I could find to date.
If anyone else has a different or better solution, please post it so we can all get maximum functionality from our little pets!!!
Hi all,
Anyone can help to remap the hard button??
I want to change the Home key to Alt-tab, and the Back key change to OK/Close (1 press for ok and long press for real close the application). I have tried AE button plus, but not function very well.
Attached is the Alt-tab s/w i have used.
Don't know why HTC put a Home and Back key in WM pro device
Thank you very much,
did you reset the device after you changed the settings?
yes, but still doesn't work
There's a software called Hbutton. You might wanna try it.
Just tried Hbutton, but it doesn't work on diamond.........
Awww.. now how am I gonna survive on the diamond without Hbutton?!
There's another software called SmartSkeys (or something oike that) Not sure of it'll work.
Anyone got any suggestions on which software to use to map diamond buttons to many functionalities?
This one works on Diamond: AE Button Plus.
To my understanding from testing AEButton on the Diamond, I have realized that:
The HOME key cannot be remapped.
The Back key is essentially a "WIN" key. You can create a new button and remap the Back key. HOWEVER, the shortcuts DOES NOT WORK when you are at today screen. So here is what I do, I remapped the Back key single click to "Escape". double click to close program, long click to close all programs.
Thats the only logical thing i can think about using the back button due to the limitations.
Any ideas?
Escape = ok/close ?
With AEB Plus I managed to map "action long" to "task manager", but the setting doesn't seem to survive a soft reset.
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Tried AE Button Plus 2.6.3, the "ok" button in AE Button Plus list can refer to back key, my setting is press 1 to minimize, long press to close current application. However, AE Button Plus can't handle the Home button. I already sent a request to them, hope their next version can sort it out.
I'm posting here to find this later. I use AEB on all my devices and want a Diamond. Hopefully it gets "worked out".
tkhs said:
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Click to expand...
Click to collapse
Yes, the mappings worked when TouchFLO was disabled. But when TouchFLO was enabled again, the mappings then didn't work.
Can someone please help me?
I use a golf GPS/Scoring program on my diamond (mobile golf scorer) and on it there is an option to use hardware button to turn display on/off, this keeps the gps active permantly. Its mapped in the program as 'button c' which from what i can tell should be the 'right hardware button' on a usual ppc.
I'm trying to map it as 'back button' using AEBPlus but it will only work on the main diamond screen or 'today' screen. I've tried mapping it to various buttons on the diamond but When i start the golf program it does not work.
Has anyone any ideas? I need to remap a button that will turn the display off no matter what i'm running.
Thanks again
I'd love to change the function of the "Back Button" aswell,
it has been annoying me since the first day I got it.
HButton seemed very promising, but sadly, it doesn't work.
Do hardware keys also have a registry number like the softkeys?
Like 112/113 for the softkeys?
Wondering anyone will use "Home" and "Back" button regularly....Maybe u guys can share your experience on how to smartly use this 2 buttons as I don't have any idea.........
Hello everyone!
This topic is very actual especially on all russian forums (hpc.ru 4pda.ru 4pda.info). Did anyone overcomed this difficulty with remapping hardware buttons? I tryed AEButton Plus but I was unsuccessfull in remapping the dimaond's "back" button - is there any one who did it? Please share the experience - it would be very very usefull to remap this button and to bind it to launching Dynamo3 task manager.
Thanks in advance.
ILya.
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
aydc said:
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
Click to expand...
Click to collapse
so this method willn't work too? http://forum.xda-developers.com/showthread.php?t=355141
the silly part on the htc side is to have 3 of 4 hw buttons do almost the same - if you are in an application, pressing home, back or hang-up button will act as "escape". am i wrong?
for one thing, it would be at least useful to have an "ok" button.
the ideal setup for me would be to use the "go to the tf3d home tab" function of the home key by pressing the "hang-up" button and use the home key as "ok"...
Anyone got this working on the Diamond. Working fine on my old SE W850 - dont know where to start with the Diamond
I'd like this too.
Can only think about doing it via web browser
I use the k800 version and remaP my left and right hardkeys to act as softkeys but the text is tiny!
How do you download the K800 version of Sky Remote?
Sky doesn't let you chose a particular phone during online setup.
Sky By Mobile Java App
Here's the Java app download.
http://mobile.sky.com/SBM/SonyE_novid/SkyMobile_SonyWithoutTv.jar
All I got to do now is try to remap hardkeys!
Got AE Button Plus, but a bit scared of all it can do.
Can Ericsson68 tell us how he remapped hard keys?
Is running TF3D, cos that seems to overwrite hard key functions when run?
Just got round to trying this.
How do i run the file as .jar files are not assosiated with any apprication?
Put .jar file on Diamond first using activesync.
Then run Jblend first and install and run java apps or .jar files from there.
I still can't get it to logon yet.
fillippe said:
Put .jar file on Diamond first using activesync.
Then run Jblend first and install and run java apps or .jar files from there.
I still can't get it to logon yet.
Click to expand...
Click to collapse
Have you looked at
http://www.digitalspy.co.uk/forums/forumdisplay.php?f=35
I know that people have had problems. You might find the answer there.
Hi
I used AE button and then remapped the left and right ring keys to long presses = left and right soft keys. I never do long presses on the left and right ring keys so this made sense to me.
Prepare to need a magnifying glass when you do get logged in though. And from experience put your password in before the user name. For some reason doing it the other way around often crashes it.
Ok! Got application working - am able to enter password and user name.
Have tried remaping keys, but dont understand how or why. Could you go through it step by step.
Have a copy of AE Button Plus installed.
Thanks
Another jar file
This one allows the soft keys to work but doesn't actually manage to login for me.
I attach the file for you to try.
Solution!
trice1921 and colthekid worked this solution out at http://forum.xda-developers.com/showthread.php?t=507152 for the Touch HD / Blackstone. It works for the Diamond as well. I'll copy the solution here and hope the mods don't mind.
The java file is here http://mobile.sky.com/SBM/SonyE_novid/SkyMobile_SonyWithoutTv.jar
The HasKeyboard reg key is important and you will need to disable the volume control in S2U2 if you use it. Enjoy!
Firstly, follow the instructions in the original article posted by gears ie. register on the web for sky mobile and download and install the java software and SkyMobile_SonyWithoutTv.jar file.
Also register for "Remote Record" via your Sky+ box (instructions on the Sky.com website)
Next, as the HD does not have a hardware keyboard, we need to "spoof" the OS into thinking the HD does have one. This is done in one key in the
registry (which I found completely by accident while looking for a different one!).
Goto... "HKCU/Software/Microsoft/Shell" and change the value of "HasKeyboard" to 1
Soft Reset the phone.
We will then need to map some of the buttons to give us up/down/left/right, Enter and Left/Right Soft keys. As NickMilner suggests above, i use "AE Button Plus" and my mapping instructions assume that's what you will use. (the program does cost but i don't know of any other one that provides double, triple and long press options for each key and appears to work well enough in free/trial mode anyway!)
Map the following in AE Button Plus
Volume Up button: Single press - Volume Up
Double press - Press Up Arrow
Triple press - Press Left Arrow
Long press - Press Left Soft Key
Volume Down Button: Single press - Volume Down
Double press - Press Down Arrow
Triple press - Press Right Arrow
Long press - Press Right Soft Key
Green Phone Button: Single Press - Press Green Button
Double Press - Press Enter
I would have liked to use the Red Phone button, but whatever selection i made, the red button always acted as an "Exit" button in the java app, so I went with the above. It's a bit complicated I know with all those double and triple presses, but IT WORKS and i've soon got used to it. I'm sure you could chose your own combination of presses, but the above ones work.
Well, there you go, see if it works for you (I Bl**dy hope so...this has taken me ages to write!!)
Click to expand...
Click to collapse
Is there a way to map 'e' hard key to open /windos/Start Menu/Programs/Quick Access folder ?
I tried using Settings->Personal->Button. But that way I can only select programs and not folders.
Then I created Quick Access.lnk and put 43#"\Windows\Start Menu\Programs\Quick Access" in there. Then I assigned it to 'e' button. The Quick Access.lnk works fine when I tap on the link. But when I try to use 'e' button, it gives error. Is there any way to map folder to the button ?
Thanks
i havent tried this yet, but you can try AEBPLUS. its a button mapping program, and lemme put it like this.
Assuming you have 3 hardware buttons on your phone you want to map, you can map about 12 different things on them, for double click, triple click, long press etc.
good luck
AeButton is a paid program. I am sure there is way to do this without payware.
tahdor said:
AeButton is a paid program. I am sure there is way to do this without payware.
Click to expand...
Click to collapse
have you tried schap's advance config tool? i don't know if it allows mapping to folders but it has alot of choices built-in.
I moved Quick Access.lnk to \windows\Start Menu. Now When I press System key (bottom left key), the menu comes up and Quick Access shows up at second position. I then use down arrow key and middle pad key to open uick access menu.
Couple of extra key press, but still achieved what I wanted for now. But I will keep searching to map the hardware key.
Advance config is built into my ROM (Garmin DK-10). But it does not have any option to re-map harware key.
Regarding the UK version of this keyboard, I can't seem to figure out how to input '~' or '#' symbols with the key that displays '~', '#', '|', '\'.
Anyone figured this out?
'Pg up', 'Pg down', 'Home' and 'End' can be emulated by holding 'ALT' and pressing the directions but only sometimes.
e.g. 'ALT' + Left arrow will execute the back action in Chrome browser.
Same for 'Esc' when holding 'ALT' and pressing the top left button. This does not seem to be just the escape function when using VIM in a terminal.
This is quite frustrating because I purchased this setup to do server work and I use these keys quite often.
I don't know how to help you, but can't you install the KeyMapper app to set key combinations for the missing keys?