Database Develop

Bluetooth status indicators and WIFI Toggle

Hi all,
I often have seen in this forum screenshots of two things I cannot find for the life of me:
1.- A little headset icon by the Start button (I assume that one comes on when your BT headset is paired and active),
2.- And a Wi-Fi toggle app (I have tried VJVolubilis, but it doesn't work on a Wizard yet)
Any help and pointers would be greatly appreciated!
Thanks!

Any takers? Please?

try vijay555's website http://www.vijay555.com/
He as done some great work!

Yom said:
2.- And a Wi-Fi toggle app (I have tried VJVolubilis, but it doesn't work on a Wizard yet)
Thanks!
Click to expand...
Click to collapse
VJVolubilis works on my wizard but you have to turn it on once first through the comm manager. Then it turns it on and off fine after that.
Mike H

holmanm: thanks for that. I didn't know it did even that much
Unfortunately, until I get a Wizard to play with, any non HTC Universal support is purely hypothetical (ie crap).
V

The only issue i've had with VJVolubilis is the toggle wifi, you can get round this by putting two icons on the task bar for on and off, and assigning both function to the voice recording button (it has press and hold functions).
As for the bt icon I've not seen it on my wizard I used to see it on my magician, but it only appears in the phone app on the wizard, if you find out how to make it appear let us know!
R

holmanm said:
Yom said:
2.- And a Wi-Fi toggle app (I have tried VJVolubilis, but it doesn't work on a Wizard yet)
Thanks!
Click to expand...
Click to collapse
VJVolubilis works on my wizard but you have to turn it on once first through the comm manager. Then it turns it on and off fine after that.
Mike H
Click to expand...
Click to collapse
Still no workie for me :-( It doesn't give an error if I turn WIFI on first, but it doesn't do anything either.
Many thanks to all responders, and more suggestions are of course very welcome!

This is exactly what I am looking for (As far as the BT headset icon):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this icon part of phoneAlarm, or Vijay's skin?

That icon comes up for me when my A2DP headset is paired... in other words I don't think what you've seen is any sort of addon, just the default behavior in AKU2 when an A2DP device is connected.

treybomb said:
That icon comes up for me when my A2DP headset is paired... in other words I don't think what you've seen is any sort of addon, just the default behavior in AKU2 when an A2DP device is connected.
Click to expand...
Click to collapse
I only use a mono BT headset... does this mean I am SOL?

Yom: the bluetooth headset icon - I can't remember where I got it from, I think I made that one myself... The rest are basically stock icons screengrabbed or ripped from the OS dlls, although I used artistic license to "improve" them slightly.
All the icons are available but jumbled higgledy piggledy in my PhoneAlarm skin here (near the end of the first, loooong post):
http://forum.xda-developers.com/viewtopic.php?p=149481#149481
eg
V
PS: hee hee: "Vijay's skin"

vijay555 said:
Yom: the bluetooth headset icon - I can't remember where I got it from, I think I made that one myself... The rest are basically stock icons screengrabbed or ripped from the OS dlls, although I used artistic license to "improve" them slightly.
All the icons are available but jumbled higgledy piggledy in my PhoneAlarm skin here (near the end of the first, loooong post):
http://forum.xda-developers.com/viewtopic.php?p=149481#149481
eg
V
PS: hee hee:
"Vijay's skin"
Click to expand...
Click to collapse
Yo! Dude! You ROCK! Thanks!
Any updates on making VJVolubilis work with WiFi on the Wizard?
Thanks again!

Tray Launch Removal from T-Mobile Wing (WM6)

I have a T-Mobile Wing and I've been playing with customizing my own rom (removing programs adding in - etc) and what I've come up with is a cross between the Touch and the Iphone - I use the iLock and the iContacts, and all of the other themes and apps from the Touch as posted in the Touch for Wizard thread (http://forum.xda-developers.com/showthread.php?t=311225)
Now my problem is: I want to remove the annoying taskbar that holds the battery status (OEM) and etc on the bottom because I do not need it anymore. Anyone have any ideas on how to do this?

WarezAppz said:
I have a T-Mobile Wing and I've been playing with customizing my own rom (removing programs adding in - etc) and what I've come up with is a cross between the Touch and the Iphone - I use the iLock and the iContacts, and all of the other themes and apps from the Touch as posted in the Touch for Wizard thread (http://forum.xda-developers.com/showthread.php?t=311225)
Now my problem is: I want to remove the annoying taskbar that holds the battery status (OEM) and etc on the bottom because I do not need it anymore. Anyone have any ideas on how to do this?
Click to expand...
Click to collapse
Just delete the try.ink in \windows\startup
lol

My Wing didn't have that in the StartUp.
Renaming this entry stopped it from loading...
HKLM/init/TrayAp.exe

The registry hack is on my blog here.

sskarlatos said:
The registry hack is on my blog here.
Click to expand...
Click to collapse
Thanks so much for your information.

sskarlatos said:
The registry hack is on my blog here.
Click to expand...
Click to collapse
Hey all
I have TrayLaunch
but am not able to Add Programs to the tray
I dont have a Icon in my Programs List
so how do i get to Options ?
the cab I got says - HTC_TrayApp
& othetr cab I got from says - PHM PPC PowerToys
Is there a ful version or something wht am i missing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ilordvader said:
Hey all
I have TrayLaunch
but am not able to Add Programs to the tray
I dont have a Icon in my Programs List
so how do i get to Options ?
the cab I got says - HTC_TrayApp
& othetr cab I got from says - PHM PPC PowerToys
Is there a ful version or something wht am i missing
Click to expand...
Click to collapse
Maybe if you install BatteryStatus - there is a traylaunch option in that where you can add and remove icons.

sphinxy said:
Maybe if you install BatteryStatus - there is a traylaunch option in that where you can add and remove icons.
Click to expand...
Click to collapse
Tell me where is it ?
I dont seem to find that option
Plz

you need the ext version of battery status and then there is a tray tab. the ext version is skinnable so i just add what i need to it other than in the tray though.

khoffice said:
you need the ext version of battery status and then there is a tray tab. the ext version is skinnable so i just add what i need to it other than in the tray though.
Click to expand...
Click to collapse
Thank You soooo Much
coculd not find full version
if u do have a Link Plz do post
& im still keep trying to look
Or just tell me the version that would help
cos i tryed a few & still not the Full version

Kaiser Options

Hey fellow Kaiser users,
I'm currently using the Tilt, with Dutty's touchflo rom. I have a few things that I was wondering whether or not can be done within the device. Can these be done? If so, how?
1. Setting TCPMP as default player within the HTC Home Plugin to be able to control the next and previous options from the home screen (assuming just using it for audio purposes) or use a skin on top of TCPMP that looks similar to that of HTC Audio Manager
2. Set S2U2 to startup with device so that you don't have to select it in order for it to run. If this is not possible, is there a way to change the items included in the quick launcher, so that S2U2 or some other program can replace some items included in the launcher?
That's all I can come up with right now, any help would be greatly appreciated.
Oh and by the way, Dutty, your custom ROM is awesome, glad I found it.

I can't help you with TCPMP but if you use a program like Battery status it will give you the ability to set up a tray launcher which will allow you to set up s2u2 there which is what I do along with some other apps. Heres a picture of it in the middle it gives you meters you can set up at the bottom is the tray launch.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

For tcpmp, to set it as default, go to options>settings> slect page>file association> check all that you need. Exit the program. Reset the device. and you should be good to go.

I've set all the file associations within TCPMP, but this doesn't set it within the HTC Homepage Plugin and allow you to control it from the homepage. If I could get this to work, it would be awesome, but it may not be possible. If that's the case I guess I'll just have to use TCPMP's not-very-aesthetically pleasing interface. . But I can deal with it, it works, so I guess that's good enough.

The HTC Home plugin only works with Windows Media Player or HTC Audio Manager.
S2U2 loads up fine for me after a soft reset. It can be selected to be used in the Home Plugin in the normal way or assigned to a hardware button or soft key.

For some reason mine doesn't automatically load after a soft reset, I have to either launch the configuration tool or the application itself in order to use it. Does anyone happen to know if there is a way to, or exist a theme similar to the appearance of the HTC Audio Manager?
Thanks for all your help everyone!

slickvic621 said:
For some reason mine doesn't automatically load after a soft reset, I have to either launch the configuration tool or the application itself in order to use it. Does anyone happen to know if there is a way to, or exist a theme similar to the appearance of the HTC Audio Manager?
Thanks for all your help everyone!
Click to expand...
Click to collapse
You should be able to set it to come on by defult with "S2U2 Setting" (most likely found in your "system Tools" folder). Make sure you have the faollowing set to ON:
-Start on wake up
-Start on backlit off
then click:
-Save
-Yes
That should do it.

[Plugins] Titanium WP7 Style [JMLPanex]

WP7 Titanium Theme​Utilitzing JMLPanex/ Showaco Weather/ Built-in Calendar/ Music/ Pictures​
Preview
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WP7 Titanium
Changable Background Tiles
Changable Wallpaper
Changable Music Tile
Changable Picture Tile
Weather Tile updates to current weather condition
QVGA, WQVGA, VGA, WVGA (Portrait Only)
Note: This theme does not replace Titaniums default CPR's​Installation
Disable Titanium
Install Mortscript if not installed already
Install JMLPanex
Install WP7_Titanium on Device
Enable Titanium

WP7 Styled Plugins w/ working buttons utilizing JMLPanex, also with Color Changing Tiles​
Post 1-Genereal Information
Post 2-Installation
Post 3-Customizing
Snapshots
WP7Phone Plugin with Notifications
WP7Messaging with Notifications
I need some poeple to test it and let me know how it works. I am using QVGA and know that it works.
Thanks CLHatch for your work on the scripts
9-18-10
Found missing > in .plg. Corrected it and reuploaded.
PLEASE DOWNLOAD NEW ONE IF IT DIDNT SHOW UP.

Note: Either you need to edit the .cpr or install one that is edited to display correctly. Both expanded and condensed tiles are the same size. Pocus area is a little larger.
Installation
Install Mortscript
Install JMLPanex
Install Plugin
Refresh HomeScreen for plugin to show up
Once the plugin is installed Click on the right softkey "Install"
Select the plugin you just installed, Select OK
Select Page 1, Select OK
Now the panex is functional and you should have "Menu" in right softkey
You then need to soft restart the phone.

Reserved

Yet another

very cooooooool
tnks

Found error in .plg and fixed new version is there and took down bad one.
Monday I will have time to post more about customizing and aslo put up the WP7Messaging plugin.

Added messaging plugin
Will add .cpr this weekend and more to come

thanks man for your work, does it works in VGA?

patacayre said:
thanks man for your work, does it works in VGA?
Click to expand...
Click to collapse
Yes, It is for all resolutions.

How many plugins are supported by the skin? I see no support for cComm, cFacebook, Coffice ect ect ...
great skin proves it on a HTC Touch XL

I have a version that I haven't uploaded. It has my two plugins included. JMLLauncher and the Titanium Calendar, Pictures and Music. I could possibly upload it as well as work on some other plugins.

Chomers Windows Mobile 6.5x Titanium Blackout Theme

CHomers Blackout Skin.
Windows Mobile 6.5
Will work in Landscape, but not finished yet.
All resolutions WVGA WQVGA QVGA VGA
*All plugin supports credited to fellow XDA Developers
CanalogClock- rpereira / CDigiClock- chriscsh
TitaniumWeather & Chome Editor- Showaco
System Panel- dgaud007
SP- A_C / Playit- Zanix
JMLPanex- JMHL
Weather Icons - Iconsoft
If I forgot someone please let me know.
Here's a older screenshot of it loaded up... May differ slightly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to:
First you will need to have Windows Mobile 6.5x
Do a search if you have not flashed your phone yet. (flashing for dummies)"noob" ect.
This won't work on 6.1 Roms
Disable Windows Default Start/Settings/Home >Items
Install Chomers Blackout Version
When Prompted Restart
After Restart
How to Set up..
After it loads go back into Start/Settings/Home >Items
Enable Windows Default
Clock:
Now go to... Start/Utilities/CDigiClock setup
Click + to open Program Files
Highlight CDigiClock Folder and Hit Ok
Setup Clock as desired and Hit OK
If you have a tweaking clock hit reload then Ok
Weather:
Click the Sun to open T-weather
Hit Menu, Enter Zipcode and hit Save/Exit
When Prompted "Exit and Run Full Update" Make sure Wifi or Data is active
CComm:
Click on the Wifi icon or other and follow the prompts
Select preferred options
CLauncher4x: Example shows .ink setup
you can also enable original Clauncher with Chome editor
Click Add (select .ink) Hit OK
Choose Program to Add (Shorten name if needed)
Navigate to Clauncher folder and Click + then highlight the icon folder
Choose Matching .png icon
Everything else is pretty self explained if you have ever used Cplugins.
To remove: ("DISABLE WINDOWS DEFAULT" Can't stress this enough)
Uninstall normally then restart
After restart Goto File explorer and remove the following.
Windows/Start Menu and delete Utilities folder
Windows/Startup Appointment and checkstatus
Restart
Terms of use:
Leave a comment so I can make improvements
Update:
Added a cab version without Fullscreen weather
Installs/Setup the same way.

will this work on 6.5 qvga device?

WQVGA?????

Should work on all 6.5 roms VGA WVGA WQVGA QVGA
I have been working on this for a while on another forum, and thought I should post it up here to get some suggestions. I am no programmer I just put it together.
Theres alot of hype for the new os designs but I always like Titanium so I made it as finger friendly as I could allowing custom icons to be easily changed.
I have a WVGA Device so would be nice to know how its displaying on other devices.

Bro as always awesome the black clock is the best. Ill post pics. Thanks again love it!

Looks like an awesome mod. I will try this sometime...thx for sharing...

Thanks I have a finished version if anyone wants to give it a whirl.

Would this work on a non-touch wm 6.5 device such as HTC Dash 3G / Maple?

thanks.i got a windows 6.5 phone recently.