Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
Hi ppl, im a newbie in this forum.
I have brought a Qtek 9090, and i have Windows Mobile 2003SE on my Qtek.
I need to find a ROM of Windows Mobile 2003SE (included on my qtek), becouse i will try to put WM5 or WM6 and, i need to have a backup of original ROM (Windows Mobile 2003) if i dont like the WM5 or WM6.
Anybody can help me? I search the internet but all links are broken, i really need my original ROM before upgrade, to downgrade if i dont like.
Sorry my bad english....:S
you can find here http://www.qtek.nl/9090_updates.asp or http://www.europe.htc.com/en/qtek9090/support/
cheers
indra9110
Sjogos said:
Hi ppl, im a newbie in this forum.
I have brought a Qtek 9090, and i have Windows Mobile 2003SE on my Qtek.
I need to find a ROM of Windows Mobile 2003SE (included on my qtek), becouse i will try to put WM5 or WM6 and, i need to have a backup of original ROM (Windows Mobile 2003) if i dont like the WM5 or WM6.
Anybody can help me? I search the internet but all links are broken, i really need my original ROM before upgrade, to downgrade if i dont like.
Sorry my bad english....:S
Click to expand...
Click to collapse
i hawe same problem but my qtek 9090 is in german leanguage now how can i got in enlish please
tnx
Thanks for this ...
man good work...
Is it so difficult to find a rom to upgrade from wm5 to wm6 ? can anybody help me please ??
Use this tutorial, it will explain everything. I used it with the same phone model!
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
try here
http://forum.xda-developers.com/showthread.php?t=427328
salam
I have pocket pc Hemalaya Qtek 2020 ; but i need Rom 2003
i setup Rom WM6 and WM5 i found same problem esp Cam
please give me Rom 2003
and thanks you for all memeber
im waiting
thanks
So would it not be better to post it in the RIGHT forum? the one above is for Himalaya & Andes i.e. Qtek 2020
NOT as this forum is for the Alpine i.e. the Qtek 2020i, there is a vast difference
I own a Qtek 9100 (G3) with OS Windows Mobile 5.0, would it be possible to upgrade to version 6.5 of Windows Mobile. How? There are real improvements with S.O 6.5?
anyone can me answer?
yes dear
yes dear you can
Hi,
I am a happy owner of a Qtek 9100 which originally had Windows Mobile 5.0 ITA.
course and following the upgrade guide I proceeded on my PocketPC (G3) with "Windows 6.1 beta 2 carbonara" I have to say is very stable.
The only thing I noticed is that after you upgrade your phone with the first ROM so I changed the values IPL and SPL but I do not put them equal, and that is me put them IPL 1.01 to 1.06 SPL I tried to upgrade 3 times and always successful but the values are always different.
So finally I decided to continue, I unlocked the CID with a dedicated tools and since I could not find a good link for the ROM T-LOVE I decided to directly load the ROM of Windows 6.1 to carobonara.
The procedure was successful and the phone is a bomb. I am very satisfied with this ROM, but my question now is:
I find myself with these values
IPL 1.01
SPL 1.06
gsm 01.12.10
OS. 4.0.0.
And 'normal IPL and SPL or need to be in the same? Is there a way to update only those? And from now on I can load any other ROM widzard for G3 even those with Windows 6.5?
Thanks again for your attention!
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
grishitu said:
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
Click to expand...
Click to collapse
you can update from 5.0 to 6.5 directly. .
first read this
http://forum.xda-developers.com/showthread.php?t=332320
after you done it, just download one ROM from this link
http://forum.xda-developers.com/showthread.php?t=492532
and that is that . .
p.s. for this you must have Windows XP and Active Sync 4.5
Help me whit a Qtek 9100
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
gracco said:
anyone can me answer?
Click to expand...
Click to collapse
yes,actually i have a qtek a9100 or htc wizard with windows mobile 6.5,and i think i´m very lucky because the rom works perfect! i downloaded from here,but i dont remember which one exactly,but leave me a message so i can send you by e-mail or something