word txt file - Tilt, TyTN II, MDA Vario III General

Hi there - after I`ve done a hardcopy and bevore I start my backup file I do have WORD as a program - but after the backup it is gone. The consequence of this I can`t read the txt files !!!
This is not so nice ...How can this be solved ?
Is there any possibility to reinstall word ? or what is wrong with my Kaiser and word ???
Thanks do much for your help
myrin

peter7 said:
Hi there - after I`ve done a hardcopy and bevore I start my backup file I do have WORD as a program - but after the backup it is gone. The consequence of this I can`t read the txt files !!!
This is not so nice ...How can this be solved ?
Is there any possibility to reinstall word ? or what is wrong with my Kaiser and word ???
Thanks do much for your help
myrin
Click to expand...
Click to collapse
Could you please rephrase your post? Are you saying that you cannot read txt files after you have done a hard-reset and then restore your backup?

Exactly this is the case - I do a hard-reset and I can read the txt files - than I run my backup and I can`t read the txt file and the word programm is gone !!!

peter7 said:
Exactly this is the case - I do a hard-reset and I can read the txt files - than I run my backup and I can`t read the txt file and the word programm is gone !!!
Click to expand...
Click to collapse
I think there are two things happening. First, when you restore your previous backup, the txt file association to Word is gone. You can fix this by changing the registry or using one of the tools like SKTools. As far as Word being gone, I think it's just that the shortcut is gone. You can create a new shortcut to \windows\pword.exe and it should work.

Sherpa, thanks so much- the last thing I did already but can you describe in detail how to and where to do the change in the registry with sktools ?

I do not know to change the registry - could you pls tell me where and what in concret ???

peter7 said:
I no how to change the registry - could you pls tell me where and what in concret ???
Click to expand...
Click to collapse
The keys you need to modify are:
\HKEY_CLASSES_ROOT\txtfile\shell\Open\Command\Default (change the string value to pword.exe %1)
\HKEY_CLASSES_ROOT\txtfile\shell\OpenDoc\Command\Default (change the string value to pword.exe -opendoc %1)

Sherpa - I don`t have the "txtfile" - so do I have to add it ? but how ???

or could you export the two files for me and I just import them - will that work ???
Thanks a lot !!!

peter7 said:
or could you export the two files for me and I just import them - will that work ???
Thanks a lot !!!
Click to expand...
Click to collapse
I have attached a zip file. Copy the two files included in the zip file and just execute both of them (tap or double-tap). Then, confirm that you want to add these keys. Once added, hold your power button until you get the prompt to turn off your phone. Do this (ie. turn off your phone) and then turn it back on. That should be it.

Many thanks I will try !

I extracted the files under windows but it didn`t work ???

peter7 said:
I extracted the files under windows but it didn`t work ???
Click to expand...
Click to collapse
Does it not prompt you to add the keys when you click on the individual REG file?

no it does not

Both files are under windows

peter7 said:
no it does not
Click to expand...
Click to collapse
You can extract the two files anywhere. Just like how you would tap on a program to execute, you would do the same with these two files. Try extracting these files on your desktop first and then copy the individual files to your device. If tapping does not prompt you to add the keys then try Resco Registry or SKTools to import the keys.

finally it worked - thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

peter7 said:
finally it worked - thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Great to hear that!

Related

How do I remove smartdial from tuma 1.3

Hi, can anyone tell me how to remove smartdial from the tuma 1.3 rom, it's slowing down my dialing speed and it is really annoying when I have to dial a long number. Thanks much for anyhelp. and oh yeah, I can't seem to remove the file that's reponsible for the graphics of the soft keyboard, it says it's in rom or something like that, I wouldn't mind it so much except it doesn't have a graphic for the letter d.
b130
b130 said:
Hi, can anyone tell me how to remove smartdial from the tuma 1.3 rom, it's slowing down my dialing speed and it is really annoying when I have to dial a long number. Thanks much for anyhelp. b130
Click to expand...
Click to collapse
Bring up the phone keyboard, select Menu, select Smart Dialing Options, Deselect Smart Dialing, and your done.
b130 said:
and oh yeah, I can't seem to remove the file that's reponsible for the graphics of the soft keyboard, it says it's in rom or something like that, I wouldn't mind it so much except it doesn't have a graphic for the letter d.
b130
Click to expand...
Click to collapse
My keyboard is just fine.
Thanks for the smartdialing issue
rschell said:
My keyboard is just fine.
Click to expand...
Click to collapse
I think it only shows when you use large keys.
b130 said:
I think it only shows when you use large keys.
Click to expand...
Click to collapse
I was able to confirm the error. It actually occurs with large keys and use gestures selected.
Attached is a revised .dll with the bit map corrected. You will need to:
1. Unpack the attached rar
2. rename the "msim.96.dll.0409.mui" in the windows folder to something else like "msim.96.dll.0409.old".
3. copy the attached file to the windows folder
4. then reboot
Hope this helps.
Hi, the problem is that the file msim.96.dll.0409.mui cannot be deleted. When renaming it a new file is created but the old file is still there. It can't be overwritten either. This is very frustrating... lol
b130 said:
Hi, the problem is that the file msim.96.dll.0409.mui cannot be deleted. When renaming it a new file is created but the old file is still there. It can't be overwritten either. This is very frustrating... lol
Click to expand...
Click to collapse
I've used Resco file explorer, it complains that it can't delete the rom version but it renames the ram version of the file anyway. You can then copy the new file to ram.
rschell said:
I've used Resco file explorer, it complains that it can't delete the rom version but it renames the ram version of the file anyway. You can then copy the new file to ram.
Click to expand...
Click to collapse
Yeah I used resco file explorer too, the included windows one doesn't even have a rename option. However when I finished renaming it, a popup windows says, can't delte file, and a new one is created. Where did you find the ram version of the file?
Lets try a more automated method.
Execute the attached cab file and then do a reboot.
Cool, it's working now, thanks for the program

Can I import a *.reg file into registry?

I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
logger said:
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
Click to expand...
Click to collapse
Install FdcSoft's Taskmanager (it has a built in Regedit), by DotFred. In there you can associate .reg files with it. Then just run them to import.
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
logger said:
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
Click to expand...
Click to collapse
Dont worry. I spent 10 minutes trying to use PHM before I gave up.
Dot Fred's TaskManager is a kick ass task manager as well as a reg editor (amongst other stuff).
P.S. Easiest way to associate is: Open TaskMgr, tools, options, Create RegEit Shortcut. This will ask do you want to associate.
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
logger said:
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
Click to expand...
Click to collapse
Don't know. I just leave the exe in My Docs, and run it from the shortcuts.
Okay. Will do same. thanks..
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
this is the steps i usually take when entering in a reg file. I use resco explorer for all this. I double click. Then I make sure I close resco through the menu exit and not the X button. Then I continue to play around with my phone for a while opening up menus and stuff. Then I soft reset. Doing these steps, I for sure get my stuff to work. There might be some unnecessary steps I take, but I end up with what I want. Many people have trouble keeping their registry stuff to stick. The steps I take, I never worry about that.
GSLEON3 said:
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
Click to expand...
Click to collapse
Thanks for the tip. Was not aware you could make shortcuts this way. Running from the card appeals because the .exe will still be there after reflashing a new ROM and I will only need to move/copy the shortcut. Being a newb I have been somewhat reluctant to run apps from the card but I am gathering that is is a quite an acceptable thing to do.
Is there a way to place registry keys inside a CAB so that they will get imported when the CAB is launched? Whilst the above DotFred association method works a treat for me with ".reg" files I would like to find a standalone method to import registry info. So that I can pass a single file to someone else and without any extra config they can import the contents into their registy.
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
thomassster said:
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
Click to expand...
Click to collapse
Thanks for the link thomasster. Does the job well. Probaly an overkill (and therefore overpriced for what I need), but I got it to work OK. Also from using it, I learnt that the process simply converts the registry keys to provxml. So now I am looking to manaully create the "_setup.xml" and then use iexpress.exe in Vista to create the CABs.
Is there a way to undo changes made by import .reg file?
I imported a reg file using DotFredd's Taskmanager. Now I want to undo it? Is it possible? How?
Thanks

[Fix] InCall Volume Control

Hello Friends
Sorry for my bad English
the problem of volume control during call in Wm6.5
you can fix it now
1- copy this file
http://rapidshare.com/files/223666094/HTCVolumeControl.dll OR
http://www.megaupload.com/?d=RYRN064U
to (windows) directory and overwrite
2- Soft rest
and make a test call , and try to control the volume
have fun
Thanks thanks thanks!!!!...
fazalali110 said:
Thanks thanks thanks!!!!...
Click to expand...
Click to collapse
You welcome my friend
SmS4SYR said:
You welcome my friend
Click to expand...
Click to collapse
that volume thing was a real pain in the A**, and your fix FIXED it
Sorry but this did not work for me.....
Do i have to make any other changes????Because i replaced the dll and i made the soft res....but unfortunately nothing....
are you use wm6.5 ?
Yes i use 6.5 and specific this ROM :
http://forum.xda-developers.com/showthread.php?t=506533&highlight=original
Can not overwrite the original, even using Totalcommander.
what gives?
anybody knows how to cook this into rom ?
Not able to overwrite. The file in Windows is Read Only. Any idea??
Yeah, my Diamond volume is too low with the new ROM, but I can't overwrite that DLL no matter what.
Can someone make a cab or something?
Update: What seemed to work was rename in Windows and then copy the new file with Totalcommander on the cellphone.
HOWEVER, while the new volume manager shows up, it's still not quite loud enough for me.
Could you add just a tad more, in case I am in a noisy environment?
otacon said:
Not able to overwrite. The file in Windows is Read Only. Any idea??
Click to expand...
Click to collapse
use resco explorer and i think total comander makes it possible to overwrite system files....
thanks for the fix... i kiss the soil you walk on...

Unicode on ATT Fuze

Hello
I wonder if anyone has figured out how to display foreign language font on ATT Fuze? I've understand that it has something to do with unicode. I was able to do that with the ATT Tilt by installing the tahoma fonts but no luck with the ATT Fuze.
Thx
i got chinese to show and write using sunglobe(view only)... forgot the name of the one that lets you write.
Thx
I just need to read Viet and Chinese for now.
Any other suggestion
attached is unicode-tahoma. you need to copy the files to both \windows directory and \windows\fonts directory. hope this will work. good luck
file attached
iosky said:
file attached
Click to expand...
Click to collapse
Thx will give it a try.
iosky: I unzipped it and put in the fonts folder but still doesn't help.
Any other advice.
Thx
i am using the files on my att-fuze. i can read/write my phone book, compose text in ms-office (word, ppt and excel) and typing sms. all in vn with no problem. you need to copy the files to both windows\ and windows\fonts directories. btw, i am using rom from master NRGZ28 (http://forum.xda-developers.com/showthread.php?t=536751). this is the best rom out there.
iosky said:
i am using the files on my att-fuze. i can read/write my phone book, compose text in ms-office (word, ppt and excel) and typing sms. all in vn with no problem. you need to copy the files to both windows\ and windows\fonts directories. btw, i am using rom from master NRGZ28 (http://forum.xda-developers.com/showthread.php?t=536751). this is the best rom out there.
Click to expand...
Click to collapse
Hello: I just copy those 2 files to the fonts folder and the windows folders but still nothing change. I am using the ATT stock rom. Could it be the reason the Tahoma fonts can't display properly?
thx
you may try to use Total Commander instead of win-explorer to perform copy and paste. win-explorer is useless.
iosky said:
you may try to use Total Commander instead of win-explorer to perform copy and paste. win-explorer is useless.
Click to expand...
Click to collapse
Thx will give that a try
Iosky: Thx I just figured it out
nice to hear that. how was your setup? here is a kb to type in vn.
Copied and pasted, did not work
Hi I am looking to solve the same issue. I have the FUZE but I am in China right now and my phone cannot read chinese characters. I dled the tahoma fonts and pasted them into the windows directory and the fonts directory but it did not work. I used Total commander. I also am not clear on whether to the folder vn_tahoma or the files themselves into the directory? I did both but it did not work. Thanks.

Use the Slider as Scrollbar. How to?? on SBP Mobile Shell

...did anyone know how i can set the Zoom-Slider as a Scrollbar. I use the SPB Mobile Shell and have Try this with the DiamondTweaks but it does not work...
pinkjones
Not for all apps, you can use this:
http://www.freewareppc.com/utilities/voldpad.shtml
k THX...i'll try this tomorrow. But this is a additional programm ...is there mybe a REG Hack , a new DiamondTweaks or something else where i can do this??
pinkjones
Actually, it's not a program. It's an .exe file, that is temporarily changes registry, until you deactivate it or make a soft reset.
okay i've try this but it does not work like u can see on the pic
pinkjones
On mine works.
I'm not sure, but I think that you are trying to run it from your pc and that's wrong. Just put .exe file in your card. First click activates it, second deactivates it.
NO! that what u see on the pic is my MobilePhone screen!!!
i installed (the .cab) @ my MobilePhone!!
There isn't any .cab file. Only a .zip and an .exe inside it.
I have not tested with MobileShell, but this reg edit sets Smart Touch to work on all supported apps instead of only registered apps.[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\SmartTouch]
"OnlySupportRegisterApp"=dword:00000000
fighter7139 said:
There isn't any .cab file. Only a .zip and an .exe inside it.
Click to expand...
Click to collapse
i have load the Vesion from the Website: beemer.sesma.eu and there it was a .cab File!!!
@Bruce: i' ve try the regKey Setting but not your .cab file... It works now... BUT not in the Program "CorePlayer" u know that? there i need this realy...
any Idea what i can do??
pinkjones said:
i have load the Vesion from the Website: beemer.sesma.eu and there it was a .cab File!!!
Click to expand...
Click to collapse
Use Mirror2 (rapidshare).
pinkjones said:
i have load the Vesion from the Website: beemer.sesma.eu and there it was a .cab File!!!
@Bruce: i' ve try the regKey Setting but not your .cab file... It works now... BUT not in the Program "CorePlayer" u know that? there i need this realy...
any Idea what i can do??
Click to expand...
Click to collapse
Yes, it just fast forwards Core Player.
No idea how to change that behavior.
@all: The Problem is fixed!!! Today on the way to my Work i used the CorePlay and ..what can i say: IT Works!! I don't know why but it works with the Tip of Bruce
THX

Categories

Resources