Hi guys!
I need help... i'm new on this things I try to upgrade my p3600 with WM5 to WM6 but when I run the RUU I got the error Invalid Vender ID.
Now my p3600 is stucked on the bootloader :'(
IPL-0.50
SPL-1.07.0000
Can you helpme to get back at originaly WM5 ?
thanks
Ok, I install the Hard-SPL and works. It's a live again.
Now I would like to try the WM6. Where I can find a stable EN rom for the p3600.
thx
Related
Hi,
Having an English Qtek 9100 (WWE) of a friend and wanting to update to the Dutch version of the OS using XDA Developers FTP: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe".
The update process starts and suddenly stops with message: "INVALID VENDER ID - CHECK UPDATE UTILITY".
How do I by-pass this error and get this 9100 into Dutch?
Thanks a lot!!
JayRayMee.NL said:
Hi,
Having an English Qtek 9100 (WWE) of a friend and wanting to update to the Dutch version of the OS using XDA Developers FTP: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe".
The update process starts and suddenly stops with message: "INVALID VENDER ID - CHECK UPDATE UTILITY".
How do I by-pass this error and get this 9100 into Dutch?
Thanks a lot!!
Click to expand...
Click to collapse
Have you followed these steps:
Enable RAPI
Unlock CID
Backup OS ROM and Extended ROM from device
At last run: RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe
?
Greets,
ReeJ
Yes I tried that and I already succeeded.
Never did a Windows Mobile ROM update before and using "aWizard" I managed to do the job.
Thanks anyway!!
i have the same problem. Also my activesync doesnt work. can u tell me exactly what to do
Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.
Hi,
My charmer is stuck at the bootscreen after trying to flash the charmer_touch rom. First I did a cid unlock and then the update. It finished without errors.
Then I flashed the official AKU3 update from tmobile (because the charmer is tmobile germany branded). Flashed without problems (in bootloader mode) but then the same problem! Even with the AKU 2.x update.
When trying to hardreset I only get "format error".
What can I do?
Thanks in advance.
Read this:
http://forum.xda-developers.com/showpost.php?p=1340773&postcount=32
Hi,
Thanks, this looks great. But I can't find a no-id ruu.
So... where can I find it?
Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Yeah, thanks. How can I integrate it in the RUU package? Because when I unpack the update and start it from somewhere of my HDD it won't work! Where is the standard directory to run it from?
Any idea?
you should place it in the same folder where the contents of the RUU were unpacked
rgs
The problem is, that I cant see/decide where the RUU is unpacking itself. When it unpacks and waits for my input, I tryed searching for the files that were unpacked, but no luck! Strange.
So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.
Megabug said:
So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.
Click to expand...
Click to collapse
can you tell me the rom you take to fix it
have the same problem Format failed and stop @ boot screen
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
try this one and tell me
after 1 % i get an nbf file error
i have
ipl 3.08
spl 3.08.0000
gsm 02.69.21
os 3.8.2.22
after hard reset i get format failed
what can i do??
i fix it
i get unlock code from imei-check
then CID unlock
and then i make sd card backup with MTTY_updateROM.exe
after next start it copy all back to the mda and now its all ok
and now format works
Charmer Stuck At Splash Screen
vlodeck said:
Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
ACTIVE SYNC NOT CONNECTED WITH MY MDA C2
i got a wiza200 t-mobile , it show only t-mobile and phone reboot
i try to flash using ruu_prodigy_226102_22610105_022511_tmous_wwe_ship
but it show me error :"" invalid vender id""
any solution to repair this phone ; or any working rom
thx
Which Rom was on it before,a wwe or some other language version ? if it was other language version,than replace the RomUpdateUtility (RUU) in the present WWE Rom with ROMUpdateUtility_Wizard_NoID.zip and flash.
Hi boss i have problem with my kaiser it stops at bootloader and when ever i try to flash it ,it says INVALID VENDER I D and the information that comes on the bootloader are
KAIS130
SPL-3.28.0000
CPLD-8 Any help plss thax in advance
ticcarsgsm said:
Hi boss i have problem with my kaiser it stops at bootloader and when ever i try to flash it ,it says INVALID VENDER I D and the information that comes on the bootloader are
KAIS130
SPL-3.28.0000
CPLD-8 Any help plss thax in advance
Click to expand...
Click to collapse
Have you hardspl your device?
No he's got stock SPL, if you are flashing a stock ROM then they are carrier specific, if a cooked ROM then you need Hard-SPL.
Flashing Your First Kaiser Rom (For Noobs)
thax for the reply when i try SPL it ,it can't read any help plsssssss thax in advance
It giving me this error {262}any SPL to solve this problem plsss that in advance
ticcarsgsm said:
It giving me this error {262}any SPL to solve this problem plsss that in advance
Click to expand...
Click to collapse
Stylez just point you to the right direction, read. What are you trying to do? flash to a cooked rom? upgrade your stock rom? give us more info. Kaiser Stuck at Bootloader