Related
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.
Right. I bought this phone (second hand, flashed with shifu 4.2 ROM {I have no clue what this means}) and it worked perfectly. It didn't come with a sim, so I went out and bought two. An O2 and an Orange one. The O2 one had problem's activating, so I placed in the Orange one. The phone somehow screwed up, saying iLockV2.exe is corrupt/could not be found. So, I contacted the seller, he told me to do a hard reset, which I done. The phone worked fine from there.
This afternoon, the phone froze, so I took out the battery and put it back in. The same problem occurred with the iLockV2.exe thing above; so I tried to do another hard reset, it didn't work. After that, I was stuck at the HTC screen where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
.
I then took out the battery again, and the same thing happened. So I took out the battery once more, and when I pushed the power button it wouldn't turn on. So, I took the battery out and left it for about 4 hours, and put it back in, but now, I'm still stuck at the HTC boot screen (same code as above).
What do I do to make my phone work again?
koglaa said:
Right. I bought this phone (second hand, flashed with shifu 4.2 ROM {I have no clue what this means}) and it worked perfectly. It didn't come with a sim, so I went out and bought two. An O2 and an Orange one. The O2 one had problem's activating, so I placed in the Orange one. The phone somehow screwed up, saying iLockV2.exe is corrupt/could not be found. So, I contacted the seller, he told me to do a hard reset, which I done. The phone worked fine from there.
This afternoon, the phone froze, so I took out the battery and put it back in. The same problem occurred with the iLockV2.exe thing above; so I tried to do another hard reset, it didn't work. After that, I was stuck at the HTC screen where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
.
I then took out the battery again, and the same thing happened. So I took out the battery once more, and when I pushed the power button it wouldn't turn on. So, I took the battery out and left it for about 4 hours, and put it back in, but now, I'm still stuck at the HTC boot screen (same code as above).
What do I do to make my phone work again?
Click to expand...
Click to collapse
First of all, stop taking out the battery when the phone is on because that really screws up the files. You are doing more harm than good there.
Try a series of soft resets to try and fix it. If that doesn't work, try a series of hard resets to solve the problem.
If no luck there, go into bootloader ( tri color screen ), hold in power and camera button at same time while doing a soft reset. The try flashing a stock Orange rom ( found in the wiki ) Then re-flash with shifu rom.
Not letting me hard reset, so I'm just going to reflash (Y). I hope I do this right :\
EDIT:
My computer can't read my phone when connected via usb D:
koglaa said:
Not letting me hard reset, so I'm just going to reflash (Y). I hope I do this right :\
EDIT:
My computer can't read my phone when connected via usb D:
Click to expand...
Click to collapse
What does the phone do when you try to hard reset ?
When you put your phone into bootloader what does the screen say . When in bootloader, does the bottom of the screen change from serial to usb when you plug it in to your pc ?
denco7 said:
What does the phone do when you try to hard reset ?
When you put your phone into bootloader what does the screen say . When in bootloader, does the bottom of the screen change from serial to usb when you plug it in to your pc ?
Click to expand...
Click to collapse
The phone just soft reset's when I try to hard reset.
And yes, it does change from serial to usb when I plug it into my computer
Seem's like I was doing the hard reset wrong. Same thing is still happeneing, not getting past the part where it says:
Code:
R 1.71.09.01
G 25.75.40.02.
D 3.34.shifu
EDIT:
After 20 or so hard resets, I've moved onto the boot-loader, then it took about 5 minute's to load to the main OS. I think everything is sorted out now. Thanks
omg, this is getting really annoying now. The phone keeps on crashing at random interval's and can only be recovered by hard resetting :\
Well if it keeps happening try a different ROM just make sure you follow F.A.Q for ROM your flashing.
The thing that it's saying is corrupted is S2U2 and to me sounds like it just can't find the .lnk in Windows StartUp.
Flash OEM Rom before the new one and if you have 2GB or smaller SD Card flash using the SD Card method.
stylez said:
Well if it keeps happening try a different ROM just make sure you follow F.A.Q for ROM your flashing.
The thing that it's saying is corrupted is S2U2 and to me sounds like it just can't find the .lnk in Windows StartUp.
Click to expand...
Click to collapse
It happen's when the phone freeze's and I soft reset it :\
koglaa said:
It happen's when the phone freeze's and I soft reset it :\
Click to expand...
Click to collapse
I'd go with what Philux-X says "to which is why i said F.A.Q" try and flash a stock ROM prior to flashing custom so as to clear nand.
The corruption due to stalling sounds pretty normal as the phone does not get to shut down via the usual method.
stylez said:
I'd go with what Philux-X says "to which is why i said F.A.Q" try and flash a stock ROM prior to flashing custom so as to clear nand.
The corruption due to stalling sounds pretty normal as the phone does not get to shut down via the usual method.
Click to expand...
Click to collapse
I'll do that next time it crashes .
Thanks for all your help guys
Hello, i was tired of duttys rom so i decided to install the orginal 6.5 windows rom.
It got to 16% and then it got stuck, i tried again a couple of times but it stopped at 16% all the time.
Then i tried to hard reset it, nothing.
Now i tried to install the newest dutty rom.
Now i'm stuck at the "Touch diamond 2" loading screen.
How the hell do i fix it?
Also it loads the RGD thing, but then it just freezes
Please help :s
What does your SPL show?
My spl? Do you mean the RGD thing? if so:
R: 4.49.25.91
G: 61.44etc.25.35U
D 2.53.Dutty
No, put the topaz in bootloader and you can see your actual SPL
SPL-1.33.0linex (stupid 5 mins for edit..)
- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode with band tricolor
Thanks for the help. You sure saved my weekend.
(Got help over pm)
**Deleted**
Nuggi, would you be so kind and share the info with the rest of us, as I have exact same problem as you did in the first post.
Phone dropped to ground, screen got bit smashed so I thought to send it to repair. I put original SPL and 6.1 rom inside and boom, doesn't boot anymore.
EDIT: Found this post, checking now if it works. http://forum.xda-developers.com/showthread.php?p=7191733#post7191733
EDIT2: Success! The software started all fine.
Hello. I'm new in here. half hour ago I got registered. so i have a problem with my HTC. For about 1-2 weeks now the device was restarting. 2 days ago the device never opened again. yesterday I tried the hard reset sequence and the device open to the message that i will lose everything and if i agree to press send but when i press it i get a green screen and nothing more. what can i do? what might be the problem? I uploaded also a video (but I can't post it cause I am a new user so ask me to send it as a pm) and a photo of the green screen.
thank you very much.
By all means, if you don't mind losing data that you had on the ROM memory, then hardreset.
Hard resetting I think is the best possible solution for you.
So press that green phone button when it tells you to ^>^
I already did a hard reset. that's why i have that green screen. I did a hard reset about 4-5 times now. thanks for your answer.
Ah, I see.
Try this:
Soft reset your phone while holding the camera button.
Does this get you to a screen where it's Red/Blue/Green/White Screen?
If it does, try plugging in a USB cord. If you get this far and see the word 'USB' in the lower left hand corner, then I think we can continue on.
I did it and it shows usb. what next?
Awesome, I'm glad.
Next, Download and run the .exe:
http://rapidshare.com/#!download|16..._4.17.405.2_4.1.13.44_02.94.90_Ship.exe|56629
After this, all should be well.
Now if you want to flash custom ROMs like the ones that I make, just follow the directions on any one of my ROM threads from Top to Bottom ^>^
before i continue. after the installation i will have the OS back? I will have to install it again? i had WM6. thank you very very much for all the help.
error 300: INVALID UPDATE TOOL.
THIS UPDATE UTILLITY CANNOT BE USED FOR YOUR PDA PHONE. PLEASE GET NEWER UPDATE UTILITY.
that's the message i got.
Hmm, okay, try searching mediafire for the user aizend1985 and look for an .exe entiled Wing something or another.. I'm out right now, so cant get the link for you.
Download and run.
i can't find the user. i'll try again. when you have the time please send me. again thankl you very much. have a great time.
Here you go mate, try this:
http://download1152.mediafire.com/he785npun6pg/yj1oz2m3mzm/TMo_Wing_RUU_Update_4.26.531.4.exe
If this doesn't work I'll try to do some research for you and see what we can do.
Error 244: Invalid model id.
Okay. The last thing you can do is to try the dutch vodaphone herald version:
http://rapidshare.com/#!download|18..._4.21.172.1_4.1.13.44_02.94.90_Ship.rar|52629
Download and run the .exe from the Red/Blue/Green/White screen.
If this loads onto your device, then what we do is we HardSPL next.
*crosses my fingers for ya*
If this doesn't work, then have HTC try to repair it. Because I don't think there is anything else to do for it :1
:'( Error 244: Invalid model id.
thank you very much for everything. at least I know that it can be fixed.
you reflashed your phone in some custom roms?
but it didnt work still and you tried the hard spl too.... can you tell me the history of your phone before it went like that, i am a technician and might help you on your problem.... what was the last thing you did on your phone? i will wait for your reply if it's ok....
dear [email protected]
I have the HTC P-4350 for the last 5 years. the last 1-2 weeks the phone started to freeze and the screen went white slowly and then restart. after the 2 weeks the phone closed and didn't open again but the hard reset is working until the part that said format done (or something like that) and then i get a green screen (see the photo I have attached here). after that i made this post and the friend Tribulattifather (member of the site here) helped me with some info and gave me some files to try and install but the first file gave me this message
"error 300: INVALID UPDATE TOOL.
THIS UPDATE UTILLITY CANNOT BE USED FOR YOUR PDA PHONE. PLEASE GET NEWER UPDATE UTILITY."
and the other gave me
"Error 244: Invalid model id.".
there isn't something else. any idea?
thank you.
what is your spl number and ipl....
did you do the HARDSPL on your phone????
do the hardspl first and then flash your phone using a micro sd....
tell me if you already did that.... i will wait for your reply....
i also want to know if you dropped it or something before it went like that.... plz tell me the whole history of your phone....
to my perspective, the phone's problem can be resolve in flashing....
tell me if you hardspl it,,,, because you cant flash it on some ROMS if it's not HARDSPLed...
hi [email protected] i had a problem with my internet that's way I answer now after all that time. I droped it a couple of times by accident but that is a long time ago. the IPL is 4.17.0001 ans SPL 4.17.0000. i never did anything like hardspl. i changed the flex cable 5 months ago. when i first got the phone 5 years ago it had WM5 and after 5 months when i bought it I got WM6 at service. i never got the phone to service cause never anything happen. i can't remember anything else know.
I have an update for my device. now it doesn't open with anything. i mean i can open it to hard reset or to see the spl. it doesn't respont to anything.
May be time to put the phone to rest, mate u.u
I'll play the taps..