WM6 (X7500) and Logitech v270 BT mouse - how to pair ?!? - Advantage X7500, MDA Ameo Accessories

Hi there,...
first of all... sry for double post on this topic. But I think I am more correct
that in the WM6 forum.
Topic = Recommendation: Logitech v270 bluetooth mouse
At this thread and where my first post was there is the recommendation that this mouse works. I also often heard that people used this on there X7500.
But I have the problem that I cannot pair this mouse with the Ameo i have.
I set the mouse in pairing mode and let the Ameo search,.. but after some time
I only got the message that there is no device found.
WM6 has integrated pointer but i stuck at first step... the pairing itself...
Maybe there are driver for HID i can install.... not Bluemouse (it doesnt work.. I tried it already... the may work if you dont have a point, but I am not that far )
Please anyone ?!?!? Any idea ?

skoehn said:
Hi there,...
first of all... sry for double post on this topic. But I think I am more correct
that in the WM6 forum.
Topic = Recommendation: Logitech v270 bluetooth mouse
At this thread and where my first post was there is the recommendation that this mouse works. I also often heard that people used this on there X7500.
But I have the problem that I cannot pair this mouse with the Ameo i have.
I set the mouse in pairing mode and let the Ameo search,.. but after some time
I only got the message that there is no device found.
WM6 has integrated pointer but i stuck at first step... the pairing itself...
Maybe there are driver for HID i can install.... not Bluemouse (it doesnt work.. I tried it already... the may work if you dont have a point, but I am not that far )
Please anyone ?!?!? Any idea ?
Click to expand...
Click to collapse
You have to press the connect button in on the mouse whilst you search. If this doesn't work change the batteries. If that doesn't work try pairing your x7500 with something else. If it doesn't work try restarting/ hard resetting. If this doesn't work it could be a hardware fault with your x7500. If pairing DOES work with another device then you could be looking at a faulty mouse.
WM6 does support HID out-of-the-box, I did experience the odd cursor 'dropout' in that sometimes the cursor would disappear and not come back - usually when using TCPMP. This did not happen with I/R mice connected via the 4-in-1 cable.

Hi Leoni,
it works... you are correct...
I am a little confused because when I paired it with my laptop I only have to
push the bottum once to put it in pairing mode and things were fine.
With the Ameo, due to your suggestion, I tried again and pushed the bottum
all the time.... surprise surprise... IT WORKS.
With 2 bottums and wheel support...
Now I feel a little like an idiot but anyway,,, it works.
(I thought I tried this before... but it seems I didnt )

Related

Logitech Dinvo Edge BT KB, working anyone?

Is there a way for me to use a regular PC Bluetooth keyboard for my TyTN II?
I have this keyboard that would really work well with the device.
It would prove to be a really cheap alternative to the keyboard that is made for the PDA's, plus, it would make alot of things alot easier.
I would assume you must make a program that can read the signals made by the keyboard, but is this possible?
Any help would be greatly appreciated
Bluetooth is Bluetooth, no? What happens when you try to pair the two devices? That's a sweet idea, by the way.
I think this might interest you as well. There's a way to connect a BT mouse to WM devices. I found it on Handango.com, although, strangely, it doesn't show up if you select the AT&T Tilt as your device (but it does show up with any WM5 device).
BlueMouse
I'm going back to grad school soon, and am loving the prospect of carrying 3 small devices that (almost) do the same thing as one heavy laptop!
EDIT: Just read through this thread, and WM6 actually has native support for BT mice! Except for Microsoft's own BT mice... lol. However, I think BlueMouse supports them.
Have a look at this link for a cheap alternative :
http://www.amazon.com/Stowaway-Ultra-Slim-Bluetooth-Blackberry-Handhelds/dp/B0002OKCXE
Buy it while stocks last, I would have brought one but I live in the UK and shipping will be too expensive along with any other taxes they may want to add unless one of you guys can send me one.
Pairing
I have a Logitech bluetooth keyboard with an integrated touchpad. But when I try to pair them, my device just doesn't find the keyboard.
Although I find it amusing, I believe it is even slower using a bluetooth mouse for my phone, than actually using the touch function
But we are atleast on the right track.
For now, I use pocket controller for using my keyboard. But the downside is that it's slow and you need your device connected to the computer at all times.
Imagine using a regular bluetooth keyboard! What a dream ^^
Have you tried using a regular bluetooth keyboard that doesn't have an integrated touchpad? There could be something about that configuration that WM can't handle.
Tec1106 said:
Is there a way for me to use a regular PC Bluetooth keyboard for my TyTN II?
I have this keyboard that would really work well with the device.
It would prove to be a really cheap alternative to the keyboard that is made for the PDA's, plus, it would make alot of things alot easier.
I would assume you must make a program that can read the signals made by the keyboard, but is this possible?
Any help would be greatly appreciated
Click to expand...
Click to collapse
Assuming your PC BT keyboard supports the HID profile (it probably does), it should work with the Kaiser right out of the box, as the WM6 Bluetooth stack has HID drivers built-in.
Connecting
3waygeek said:
Assuming your PC BT keyboard supports the HID profile (it probably does), it should work with the Kaiser right out of the box, as the WM6 Bluetooth stack has HID drivers built-in.
Click to expand...
Click to collapse
Ok. Now my device actually finds the keyboard, but I can't connect it. When I click connect, it asks for a password. I enter nothing, and it continues to where I can select the purpose for the keyboard. When I press finish, my device tells me that the keyboard wants to connect to my phone. Now I need a password to continue, so therfore I enter a random password, like 1111. Then my device waits for a few minutes, and tells me the keyboard has failed connecting.
I have a DiNivo Edge keyboard, if it's any help
Any ideas?
Thx ^^
Maybe...
Maybe I need a specific code, or a way to make the keyoard agree to the connection.
Difficult
Try 0000 -- that's almost always the default password for BT devices.
3waygeek said:
Try 0000 -- that's almost always the default password for BT devices.
Click to expand...
Click to collapse
Thank you, but I've already tried it. The keyboard behaves like a phone, making my phone waiting for the keyboard to input a password. Damn :\
Tec1106 said:
Thank you, but I've already tried it. The keyboard behaves like a phone, making my phone waiting for the keyboard to input a password. Damn :\
Click to expand...
Click to collapse
Sorry this may seem stupid, but have you got the user maual for the keyboard? Or tried the manufacturers site if not? They may have a general config for it (PC and WM device association key will be the same).
Otherwise, look around the keyboard (and even in the battery compartment of the keyboard) for a four digit number to try.
Farsquidge said:
Sorry this may seem stupid, but have you got the user maual for the keyboard? Or tried the manufacturers site if not? They may have a general config for it (PC and WM device association key will be the same).
Otherwise, look around the keyboard (and even in the battery compartment of the keyboard) for a four digit number to try.
Click to expand...
Click to collapse
No, it doesn't sound stupid Sometimes even the smartest person forgets the simpliest resolutions
But I have already tried that, except for the battery compartment. I have no idea how to open it, cause it's an internal rechargeable battery. But if there is an opening somewhere, I'll take a peek inside for a four digit number
Thanks!
Been looking ...
... everywhere on the net, but still haven't found a way to connect the keyboard :\ Anyone that has the DiNivo Edge keyboard, and could help me with this? It would be more than appreciated
Thank you!
Nothing works
I'm giving up
Tec1106 said:
I'm giving up
Click to expand...
Click to collapse
Don't,
I've looked up the Logitech Dinvo Edge and it looks as if it comes with a proprietory BT USB dongle for PC connection and all setup is done through an install CD (for the PC).
Do you have the CD because the 4-digit pin may be on the setup instructions. Failing that, it may be best to go to your first post on this thread and edit the title to be a bit more specific such as ' Logitech Dinvo Edge BT KB, working anyone?'
Give it a go.
Farsquidge said:
Don't,
I've looked up the Logitech Dinvo Edge and it looks as if it comes with a proprietory BT USB dongle for PC connection and all setup is done through an install CD (for the PC).
Do you have the CD because the 4-digit pin may be on the setup instructions. Failing that, it may be best to go to your first post on this thread and edit the title to be a bit more specific such as ' Logitech Dinvo Edge BT KB, working anyone?'
Give it a go.
Click to expand...
Click to collapse
Now, two months later, I am still clueless about how to get this working. Anyone having better luck than me?
I think you should enter your own passcode first on your PDA, and quickly typing the passcode on your BT KBD while PDA is waiting..
I could connect with Apple BT, Microsoft BT kbd..

Emulation of Logitech diNovo Mini

Hello,
some weeks ago I have this discovered this mini-keyboard, which you can link to the PC via bluetooth and use as a keyboard and mouse:
http://www.logitech.com/index.cfm/keyboards/keyboard/devices/3848&cl=us,en
http://es.youtube.com/watch?v=Dj0MF58-ElA
My first impression when I saw it, it was that this device looks similar to my TyTn 2, especially when the PDA has the keyboard open...
So, this is exactly my question. Exists any kind of software for my PDA that allows to link the keyboard of the TyTn to the PC and, for example, use its touch-screen as a mouse?
Thanks
very interesting i would also be very interested in this as well...
That is a pretty good idea. I got a freee BT keyboard from amazon though.
yea there is, but it uses wifi. I can't remember the name of it now, but I think it was posted already. I will look when I get home.
http://www.salling.com/Clicker/windows/
tried and hit wall
Last week I begun developing/experimenting on such an app, to use the kaiser as a bluetooth HID mouse.
I did manage to get windows to recognize and install it as a HID mouse, but could not establish a connection. The problem is that the M$ bluetooth stack does not seem to allow me to attach to the L2CAP layer and implement my custom profile (the HID profile in this case).
If anyone has more information on how to access the L2CAP, please share .
The kaiser would be a wonderful remote mouse/keyboard for my htpc configuration!
hypest

Bluetooth Mouse list..?

Hi i've been searching for a list of mice that work for our phones, i have a mouse program on my phone atm called BlueMouse. But for some reason the BT mouse i have isn't being picked up by my phone BT setting. And yes i have the bluetooth on, checked all the setting as well. The mouse i have atm is a Micro Innovations.
If any1 has any info please help.
Thankx
i would take a look at the troubleshooting page of the software, it looks like your mouse isnt broadcasting its id so your phone cant pair.
http://www.teksoftco.com/index.php?section=bluemouse&tab=info

Got The Logitech diNovo Mini Working With The Diamond

This should probably applies to all Bluetooth HID keyboards as well.
But anyway, I just bought a Logitech DiNovo Mini BT keyboard
http://www.logitech.com/index.cfm/keyboards/keyboard/devices/3848&cl=hk,en
I noticed that it was reporting as a typical Bluetooth HID device and thus I did the obivous thing and scanned for new devices with my Diamond. Lo And Behold it was detected! With a nice keyboard icon beside it too!
So I choose to connect to the device and then it asked me for a pass key, so I punched in the typical 0000, and the beach ball appeared.. and I waited... and waited... and waited..
"Error establishing device!" Damn!
I tried again cause I felt that it took too long to tell me that there was an error for it to be NOT WORKING And again I was greeted with an error.
So I scoured the net and I came across a Logitech KB article for their other Bluetooth keyboards, seems like to connect to it on Windows you'd have to TYPE the passcode on the KEYBOARD.
So again.. I got to the connection screen and then I keyed in 0000 in the diamond, pressed NEXT. Beachball came up, then I quickly typed 0000, ENTER on the keyboard.
"DEVICE CONNECTED!"
Woo hoo!!!
Downside is that since the keyboard doesn't have function keys, I can't access the soft menus on the screen.
Another more inconvient downside is that when the BT keyboard is connected. ALL FRONT BUTTONS on the Diamond are deactivated! Must be how the driver works. And since the DiNovo Mini doesn't have an off switch the only way to regain use of the front panel is to toggle the BT connection.
Inconvinient? YES...
Useful? ABSOLUTELY!!
hey marauderz, thanks for the heads up, i got a dinovo mini too (using with ps3) and after reading your post i'm going to try it out with my diamond.
I wonder what's going to happen when you have both ur PS3 and ur Diamond on at the same time? The box doesn't mention multiple connection sources
well just let us know, I haven't gotten home to try it out with my PC yet so I don't know about what happens with multiple sources.
WOOT it works just like you said!
About ps3, i'm not sure - i am using it in pc mode (switch at the back of dinovo) so it wouldn't work anyways if my ps3 was on. Later on i will try my laptop/dinovo and diamond/dinovo.
On the diamond, when i soft reset, i have to delete and remake another bt connection before dinovo would work again - toggling the bt would not make it connect. Bummer but hey this gadget is really cool!
Thanks again
Hi
marauderz said:
Another more inconvient downside is that when the BT keyboard is connected. ALL FRONT BUTTONS on the Diamond are deactivated! Must be how the driver works. And since the DiNovo Mini doesn't have an off switch the only way to regain use of the front panel is to toggle the BT connection.
Click to expand...
Click to collapse
I have also a DiNovo paired sucessfully with my Diamond, but the "bug" with the hardware keys is really a downer. I've searched MSDN and the Net but I didnt find anything to solve this Problem. I hope somone else can do this for me
vince
WOW!
just connected my Diamond to my Logitech MX5000 keyboard
marauderz said:
So I scoured the net and I came across a Logitech KB article for their other Bluetooth keyboards, seems like to connect to it on Windows you'd have to TYPE the passcode on the KEYBOARD.
So again.. I got to the connection screen and then I keyed in 0000 in the diamond, pressed NEXT. Beachball came up, then I quickly typed 0000, ENTER on the keyboard.
"DEVICE CONNECTED!"
Click to expand...
Click to collapse
I'm trying to do this w/my dinovo edge keyboard and it's not working? Can you please provide some more details? I'm assuming you keyed in a 4 digit code and pressed ENTER on the keyboard, then typed in the same 4 digits on the phone and pressed NEXT?
Good find, hope I can get it working too!
EDIT: I found specific instructions on how to do this. You have to enter the code in this order=>
It seems that the pairing procedure is as follows for devices that do not generate their own random passcode for use with the Dinovo, although I gathered this from experimentation:
Press Connect button on underside of keyboard
Search for Bluetooth devices with computer/PDA/phone
Select Dinovo from devices found
Enter a passcode on computer/PDA/phone if prompted (you choose the code), submit
Enter the same code on the Dinovo keyboard
It may be necessary to press ENTER on the Dinovo keyboard
Hopefully, the pairing will be successful.
smartphone - windows mobile 6
i would like to use the mini with windows mobile 6 - more specifically the tmobile shadow2. I can connect the device and my mobile recognized the keyboard as a form of input, but the keys on the mini are not working. are there any wm6 updates that i should find? I am on .net compact 3.5
National characters
Does somebody try to use Logitech Dinovo Mini for typing the national characeters? (like ľščťžýáíé etc...)

Compatible Bluetooth Mouse?

Has anyone found a compatible bluetooth mouse? I can't find a standalone bluetooth mouse that will successfully pair with my DB (I have tried a Targus Model#: AMB04US and a Think Outside BT Mouse).
Furthermore, all posts I can find relating to the subject are for a keyboard with a built-in trackpad but I hate trackpads. I want to use a standalone bluetooth mouse and don't want to have to buy a dock (I am using the Webtop hack that bypasses the need for a dock).
Thanks in advance.
I successfully used my MS Bluetooth Mouse 5000 on the web-top. But here's the thing that might be causing your issue with the other mice: When I went to pair the mouse with the web-top it was waiting for me to enter a pairing code on the phone screen window and since i had that window behind a Firefox window and I didn't realize it the pairing process kept failing.
Logitech has a mouse out meant for android tablets. Maybe give that one a try?
XDA Community: Please post other mice that have worked?
TheNinthPlayer said:
I successfully used my MS Bluetooth Mouse 5000 on the web-top. But here's the thing that might be causing your issue with the other mice: When I went to pair the mouse with the web-top it was waiting for me to enter a pairing code on the phone screen window and since i had that window behind a Firefox window and I didn't realize it the pairing process kept failing.
Click to expand...
Click to collapse
Thanks for the suggestion. I get the pairing code window, but when I enter 0000, 1234, or 4321 (per Motorola Support's suggestion), they all fail. Targus support says it is because there is no PIN required. So if I enter something then delete the pin I entered (just to get the OK button to activate), it still fails.
I'm glad to hear that the MS Bluetooth Mouse 5000 works though. It appears reasonably priced online. Motorola wants me to go buy their mouse for $40+shipping. Seems a bit steep for something that clearly isn't working due to software incompatibility.
XDA Community: Please post other mice that have worked?
I wanted to close out this topic by giving others the following insight:
The MS Bluetooth 5000 mouse works flawlessly with my Droid Bionic both in standalone mode (nothing attached) and in Webtop mode (with the WebtopMod_Hack that enables you to get to webtop without a dock). I purchased it for $18 from a seller on eBay and found other sellers listing it for $20-$25.
Hope this helps future purchasers out.
Same here...
I'd also like to chime in and say the Microsoft Bluetooth Mouse 5000 works just fine.
It really irks me though, because I have an older (ironically) Bluetooth Mouse 8000 which I really liked because it had an integrated laser pointer and presentation controls on the underside of it. I could never get it to pair.
Microsoft must have made some changes in the device firmware stack because now with the 5000, I could get it to pair to my Bionic using the passkey 0000.
No matter what I tried, the 8000 would not pair.
-Rob
I've just picked up Logitech's V470, and it works great! No issues
www(dot)logitech(dot)com/en-us/428/3287
Stock, rooted, web top mod
Ebay link for $19.95 Microsoft 5000 Bluetooth Mouse
http://www.ebay.com/itm/220875044915
Just thought it would be helpful for someone!! I just bought one thanks for the tips.
jlee1026 said:
I've just picked up Logitech's V470, and it works great! No issues
www(dot)logitech(dot)com/en-us/428/3287
Stock, rooted, web top mod
Click to expand...
Click to collapse
Identical setup (stock, rooted, webtop mod), identical results! In fact the V470 has worked on DX, Xoom, and now the Bionic for me with no issues.
Same problem with microsoft notebook presenter mouse 8000
Same problem. Imposible to sync MS Mouse notebook . (Asus Transformer Prime TF201)
robroy90 said:
I'd also like to chime in and say the Microsoft Bluetooth Mouse 5000 works just fine.
It really irks me though, because I have an older (ironically) Bluetooth Mouse 8000 which I really liked because it had an integrated laser pointer and presentation controls on the underside of it. I could never get it to pair.
Microsoft must have made some changes in the device firmware stack because now with the 5000, I could get it to pair to my Bionic using the passkey 0000.
No matter what I tried, the 8000 would not pair.
-Rob
Click to expand...
Click to collapse
I have the wireless Apple Mighty Mouse that I use with my Mac and that paired up well with the phone.
I'm running the latest CM9 SELFKANG. The cursor works fine. Scrolling with the trackball is great. Clicking is fine. But it lags and locks up horribly on stock. Anyone else notice that?
Mouse Acceleration?
Do you have any mouse acceleration with the mice you have tried? I just tried to plug in a Logitech MX518 to the USB-port and i have terrible mouse acceleration (when you move the mouse slowly the mouse sensitivity is really low, but when you move the mouse fast the sensitivity is much higher).
I need to find a mouse that does not do this (or a program that will correct it).
I found a solution to this maddening issue!!!
Solution is very simple!
1) Download an app called bluetooth pairing in Play Store, its in japanese but all you need to do is click the magnifying glass icon, then click your device and hit the big blue button that comes next..
2) Disable and enable your bluetooth on the phone, the device is already paired
3) Select the device and it works perfectly.
Discovered this fix accidentally..
I use the Microsoft Bluetooth Notebook Mouse 5000. Works awesome no need for a third party program the mouse cursor works fine and you can find tune the mouse cursor in the language and input settings of the settings menu. I really like using the scroll wheel and you can even use right click with in ES File Explorer.
I use this same mouse with my laptop.
Sent from my Nexus 7 using Tapatalk 2
Anyone tried a Razer Orochi mouse? That is the bluetooth mouse I want to pick up for my laptop since I hate dongles and am adding a bluetooth transmitter internally to the laptop. Would be nice to have a mouse that will work for both my laptop and for my DB with the lapdock. I know that with the lapdock most USB dongle wireless mice will work but I hate dongles and I know one day I'm going to lose the stupid thing and be SOL.

Categories

Resources