hello!
i would like to create my own reg settings and performance settings .cab file with cab manager.
i have some registry keys (exported with tcmd), but i cannot find owner name..
does anybody know it?
also i am searching for "hungary - regional settings & 00h:00m:00s format"
thanks,
pulyka
Try searching through your current registry for your name (or whatever info you have under the owner section.)
i tried it, but unfortunately it did not helped
thx anyway
\\HKCU\ControlPanel\Owner
Owner is binary and will contain EVERYTHING. Try filling it out then exporting that key. That's what I did to create my own personal information cab file.
thankyou!
i will try it tomorrow!
Related
Somebody please help me in creating a cab file for my gprs settings. I like to run it from the extended rom. Here is my connection details.
Name - AirTel
Access Point - airtelgprs.com
Connection Location - My ISP
Also I need to add a string to be included in the cab for this connection to set it to "alwayson" as "1".
Nishad
60 views and no reply...oh no please help
Please tell me how can I create a operator settings cab file.
Nishad
It's not that easy. What I'd do is to reinstall the latest ROM that worked on your device, install TotalCommander, go to \\extended_rom, find your provider's GPRS cab and copy it to your storage card....
(That's what I did)
There is no cab provided by our GPRS provider (Airtel). I'll try and make a Provisioning File with those settings nishadks.
It will be usefull for me too
hitu said:
There is no cab provided by our GPRS provider (Airtel). I'll try and make a Provisioning File with those settings nishadks.
It will be usefull for me too
Click to expand...
Click to collapse
Please hitu...that will be great. I was looking around the forums on how to create the provisioning cab file but end in vain.
- Nishad
I would also like to create Brazilians Operators CABS.
If you have not made a cab file before i would say use a cab builder to make it!
funman said:
If you have not made a cab file before i would say use a cab builder to make it!
Click to expand...
Click to collapse
I know how to build a cab funman. I use wince most. Just I want to know where can I get the setup xml file template and how to modifiy it.
-Nishad
What registry keys should I change to configure it?
ATHelp said:
What registry keys should I change to configure it?
Click to expand...
Click to collapse
I dont know if you did try already but it took me 2 sec to go to the FTP find a cab file and extrat the eml file!!! It is not hard, why are you using up place when you could have done it along time ago if all you want was the xml file!!!
You know that if you would like help with something you have to show that you have tried!!! Like the other day i could not get a xml file to work for me, so i posted the script on here and i had the problem solved within 2 mins!!! Just show that you have tried and people will help you quicker!
You can look at it like this or chane the end to xml!
TIM Brazil Network Configuration
I have created a cab to configure TIM Brazil GPRS, WAP. MMS Client Configuration will be available in the next release.
I would like to ask for those who use TIM Brazil and can test this cab. Just remember that this is a Beta version. I already tested in my Wizard and worked but you never know...
funman said:
I dont know if you did try already but it took me 2 sec to go to the FTP find a cab file and extrat the eml file!!! It is not hard, why are you using up place when you could have done it along time ago if all you want was the xml file!!!
You know that if you would like help with something you have to show that you have tried!!! Like the other day i could not get a xml file to work for me, so i posted the script on here and i had the problem solved within 2 mins!!! Just show that you have tried and people will help you quicker!
You can look at it like this or chane the end to xml!
Click to expand...
Click to collapse
Funman, you are correct. I was attacked by a strong laziness. I asked without putting my brains to work first. Thanks for everything.
I have update TIM cab file and created another two for Oi and Claro Brazilian operators.
To avoid any problem, please run RemoveAll.cab in the first place.
I have just purchased an HX4700 and downloaded a WM6 rom....there are some very talented people out there. I have searched the web for any other rom to get the 'transcriber' functionality back but am not having any luck. I apologise if there is already an entry about this however I have not found it.
I did down a CAB file and copied to my pda, clicked on the setup...got a screen like html text, did a soft reset but nothing changed. It was called MS_transcriber. Any help would be very much appreciated.
Read this and this.
Download.
Thankyou CWKJ for the help.....excuse my ignorance but I'm not sure where to go with the info in the other threads.
I am running wm6.1. I extracted the 'Input Method Fix' and copied the files to my PDA. I then double clicked on the '_setup.xml' file and a list of text like html ran. I then did a soft reset of the device but the transcriber functionality is not listed as a input option.
Do I need to physically alter the registry file and if so how? I have done it on a PC many times but not a PDA.
thankyou for your patience.
By installing the cab, the registry should be correct.
There are tools like TotalCommander (freeware, google and you will find) which I use can help read registry, but do not try to meddle registry for new comers.
For both Recognizers, check if msim.dll is in \windows\ directory.
For Transcriber, check if TranscriberSip.dll is in \windows\ directory.
Using file explorer to check the files may not work as the files may by hidden. If you cannot find them, use TotalCommander as file explorer to check.
If it is not there, I will send them to you, and you just need to copy them into \windows\ directory.
I downloaded total commander. Ran a search for the "TranscriberSip.dll" file however could not find it.
I would appreciate it if you could send it to me thanks.
Shane
.....I had changed the preferences to look for hidden files as I did find the "msim.dll".....still need the "TranscriberSip.dll" from you if you could assist.
Tks, Shane
27/5/08: Disregard my last as I have solved the Transcriber issue. Was a *.cab install issue.
Tks again for the help.
Hey, i had a question, the TP has got many tweaks, you have to manually put them into the registry, my question is: is there a program that can do al the tweaks that i want automatically? i know there are some programs like advanced config, diamond tweak etc etc. but i only want a to put all the "Queries" in 1 txt file just like SDCONFIG.TXT. sorry for my english! hope someone can help me or make a program like this! i think a program like this could help many people, especially the people who are afraid of editing the registry.
thnx in advance
Using an XML file, you can accomplish this with SDCONFIG.TXT and a provisioning XML, see this post: http://forum.xda-developers.com/showpost.php?p=1896955&postcount=2
Da_G said:
Using an XML file, you can accomplish this with SDCONFIG.TXT and a provisioning XML, see this post: http://forum.xda-developers.com/showpost.php?p=1896955&postcount=2
Click to expand...
Click to collapse
ok thnx for your help!
now can anyone make a XML files with the best working tweaks for the TP ???
Use Diamond Tweak
You could use advanced confic and then select export provisioning or something like that and then select witch items you want to export and then put that into your sdconfig worked perfect for me using sashimi witch does the same thing basicaly as sdconfig just easier to add and delete cab's and whatnot.
If you know all of the registry tweaks, you can use my QuickCab utility to create a cabfile. Just put your registry tweaks in the cab file, and install it like a regular program.
Here's the thread and I'm working on a new version that should be ready for testing soon.
IABovine said:
If you know all of the registry tweaks, you can use my QuickCab utility to create a cabfile. Just put your registry tweaks in the cab file, and install it like a regular program.
Here's the thread and I'm working on a new version that should be ready for testing soon.
Click to expand...
Click to collapse
nice going to see that topic!
You can export/import also parts of the registry with Resco Explorer and Registry add-in. Best software for PC I can recommend is Registry Workshop to join/split/compare registry entries,etc...
I have several e-mail accounts configured in Diamond Messaging and I lose a lot of time everytime a change ROM to put again user, password, pop3 and smtp servers, configuration, etc.. in each e-mail account
Is there any way (program, save Register keys, ...) to make a copy of the e-mail configurations and restore them automatically after changing ROM?
I have tested with SPB Backup and PIMBAckup, but it does not save/restore the settings of e-mail accounts.
Thank you very much in advance.
Search for "Makisu". This is what you want.
Makisu
Thank you. I just have download Makisu, but I am not able to find documentation (video , documentation and creenshor links are not valid).
Please, can you explain me what and how does it work or send me any documentation or tell me wher can I find it.
It seems to create xml files with the configuration, How do you import these files to Windows Messaging from Diamond?.
Thank you.
I use Sashimi, which in turn uses Makisu to script these details, after a bit of fiddly setting up works a treat now.
reg files
I have get a lot of information about Sashimi but i think that it is useful if you have reg files for your programms and so you do not have to activate and to configue them everytime.
But I think that it is a little bit difficult to get reg files.
Is it enought to copy HKEY_LOCAL_MACHINE\Software, HKEY_LOCAL_MACHINE\Software\Apps, HKEY_LOCAL_MACHINE\Security and HKEY_CLASSES_ROOT\CLSID Register keys or it is dangerous?
Must I have to copy any other one Register key?
Is ther any information about reg for activation code and configuration for common programs?
Thank you
The Sashimi site has good tutorial on how to use windiff and PHM Regedit to find the changes to the registry.
It's not always the easiest, but it's not too hard.
I would advise not backing up large swathes of the registry and restoring as it may differ between different ROMs.
montarelonf said:
Thank you. I just have download Makisu, but I am not able to find documentation (video , documentation and creenshor links are not valid).
Please, can you explain me what and how does it work or send me any documentation or tell me wher can I find it.
It seems to create xml files with the configuration, How do you import these files to Windows Messaging from Diamond?.
Thank you.
Click to expand...
Click to collapse
Makisu video and links to website are here:
http://www.youtube.com/watch?v=iRJ9-LaddRk
Using Sashimi
Thank you.
I have learn a lot and now I know, more or less, how to use Makisu ans Sashimi. I think that it is a very useful tool.
I have some doubts:
1.-Programs that i put in exe folder are installed in device or in storage card ? Can i chooose it? How?
2.-How can i use it to copy files to Storage Card? Root folder is only for copy files in Device, is it? I say this because if you have a program installed on storage card and you reinstall it after a hard-reset, this new installation overwrite all your previous files and, perhaps, you want to maintain your configuration in your old ones..
3.-Some times during Auto cab installation a screen with error from Sashimi appears. I think that it is because the cab ask for an user action (license agreement, reset,...), how can I solve this problem?
Thank you
1) - Unsure, anything I install are CABs and in the CAB file.
2) - CAB/SD 'should' install it on the SD card, but I attempt this with S2P and it still installs it on the Device. Most config lives in the Registry and you can import this as well.
3) - Not sure I don't get this error. What CAB is it that fails.
Sashimi
Thank you.
1.-I am going to try to get all programs in cab
2.-I will copy these files directly
3.-I thnik that this problem is cause by the txtLicense string of SASHIMI.mscr that is missing for my language (spanish), i think i have to put txtLicense="licencia" just in spanish "if" section of SASHIMI.mscr (about line 250).
In many forums i have read that you can change the operator name using this registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\RIL\OPERATOR NAMES
then you create a create a "String Value" with Name as your operator code and the value is the word that u want to be changed....
But in my case, OPERATOR NAMES do not exists
Can you please take a look at this:
Im using BsB rom, can u please help me?
try searching for a program called "Personalizer" its a small cab file that automatically changes your operator name to whatever you type in the text box that pops up when you run it so no need to mess with the registry!
i have used personalizer, but i would rather do it this way, can someone help me please?