MMS setup with Rogers/TyTN II - Tilt, TyTN II, MDA Vario III General

I have a baked Dutty Tytn II using on Rogers Wireless here in Toronto.
a) I have the Rogers Vision plan, so am enabled with all the high tech trans fats including MMS.
BUT I have scoured the virtual earth and beyond on setup info for MMS/Rogers and still can not get it working.... anyone?
b) I also have a sim card with TWO phone numbers, but can only ever dial out from the primary number because there is no option on the phone to switch numbers. However Rogers phones have this option built into their ROM... any suggestions?
Thanks in advance

http://forum.xda-developers.com/showthread.php?p=1306107#post1306107
use the cab here

Wowzers
just like that MMS works like a charm!!
HUGE Thanks to Lurch as well for creating the .CAB
Anybody have any suggestions on the 2 line simcard question?

I read somewhere on this forum that someone had two lines working on their kaiser.
http://forum.xda-developers.com/showthread.php?t=346431

Northred said:
just like that MMS works like a charm!!
HUGE Thanks to Lurch as well for creating the .CAB
Click to expand...
Click to collapse
Update: Streaming Video and Music no longer works OTA with this CAB installed (was working before install)... MMS works though... tradeoff?
Bug?

Related

TMobile AIM/MSN/Yahoo on Cingular 8125?

I'm new to the wizard world and read though tons of posts about backing up and restoring ROMs, but I couldn't quite find the answer to this question. Is it possible to take the instant messaging programs from the TMobile extended rom and install them on the Cingular 8125?
Should I assume from the lack of response that this isn't possible?
Use AgileMessenger. One IM client works with all the IM services. Pretty good!
From the T-Mo USA Ext Rom I used these 2 CAB files to get the program to work. Signed_Move_IM_Link.sa.CAB and Signed_OZPocketPC.Cab. and now i have the program working fine. Let me know if that works for you.
mlynch01 said:
From the T-Mo USA Ext Rom I used these 2 CAB files to get the program to work. Signed_Move_IM_Link.sa.CAB and Signed_OZPocketPC.Cab. and now i have the program working fine. Let me know if that works for you.
Click to expand...
Click to collapse
where did you get those as i can't find them :\ thanks.
I just tried this. It works great. I assume this program works via a Proxy? If so, is it a tmobile proxy or OZ proxy?
PS. found it on ftp.xda-developers.com/uploads/
perhaps this one:
ftp://xds:[email protected]/Uploads/TMo-US-Ext_ROM.zip
i'm gonna try this as well
so i got those cabs installed on 8125 but how do you make it connect?
can make it work over edge or wifi? proxy no proxy?
its not working on either edge or wifi on my 8125 on the cingular network
if someone could figure this out this would be a huge solution to alot of 8125 users
See this post:
http://forum.xda-developers.com/viewtopic.php?t=41550
It appears that this program uses text messaging instead of the internet.

Palm Threading App on keiser

I installed the Palm thread app ripped from WM6 device board and everything works except sending MMS I keep getting out of memory errors. I made sure that the pic is under 300k but as soon as I hit Send I get the message. I'm with cingular/at&t. I have searched regarding this but I noticed that for some people it works fine and other not so its hit or miss. But I wanted to know if anyone else has tried to use this on there kaiser.
Thanks
i tried it and no, you cant send any MMS's (I tried some of the other varients found elsewhere on this forum but none work better). In fact I found that this app had knock on problems all over my TYTN II and slowed down the machine considerably. Since this isnt an app you can just remove I had to do a hard reset.
Thanks for the reply hopefully someone figures out a fix for the slowness and mms not working on the tytn II
No one else has tried Palm threading app on there Keiser yet? and has mms working with AT&T??
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
jhernand1102 said:
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
Click to expand...
Click to collapse
I am experiencing the same. Luckily I don't use MMS very much so if I absolutely need it I can Uninstall Threaded SMS and fetch the incoming MMS then re-install threaded sms. I had same issue with Cingular 8525..Too bad, this is the best threaded sms app out there to me. I can't understand why they haven't built a threaded sms app that comes pre-installed. So basic. Everyone uses SMS. What are they thinking?
any updates on this one yet? I miss my threaded SMS/MMS
**** it doesnt work for me either
****ing BS...please shogun mark, HELP!!!
i wanna stress how important this app is to me.....i was sooo ****ing excited to go from 8525 to kaiser. this actually almost makes me wanna go back.... even though the kaiser is soooooo much sweeter. im beggiing someone to please please work on a fix for this!! please
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
austinsnyc said:
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
Click to expand...
Click to collapse
Which version of Palm threading app are you using?? I have tried to setup the correct settings for the ATT mms part and still as soon as I try to send a mms i get the "out of memory error"
if anyone gets it to work they are brilliant...i have the shogunmark version from windows mobile 6
ttttttttttttt
It is a known bug in the app. Just be thankful we have what we have. To better understand, go here:
http://forum.ppcgeeks.com/showthread.php?t=621
Works for me. The Shogun version thats circulated around doesnt work. You need the full version. Do a search and you might find it. THe problems are the same on most WM6 devices, and not just the Kaiser.
P.S. Some f-in patience might make people actually want to help you. 6 posts, half dropping F bombs doesn't endear you to the community.
Temporary Fix
Well this is what I do to have palm threading and MMS working on my Tilt witch is something I have asked before but haven't gotten an answer but this is my crazy hack or whatever you want to call it.
My theory was well since the MMS portion for Palm threading is out of the question regarding a fix from what I have been reading about. I asked before If after you install palm threading is there away to enable again the default MMS application that came with the phone like that giving you the option to use palm threading for Txt's and sending MMS' to be sent by the default application witch i like better.
I have the files but I dont know where to upload them too but if someone can post them up I will send it to them.
Basically I managed to get me the cab installation of Arcsoft MMS composer ver 4.0.21.28 .. I noticed that tilt has a new version 4.0.3.?? anyways so basically this is what I did..
1) install Palm threading application - reboot device
2) Install Arcsoft MMS application - reboot Device
3) Install EnableMMS.cab - Reboot
4) Re-apply ATT MMS cab configuration so that MMS gets configured
Now when I press on the email key I get the option to compose a MMS and I can receive them fine..
Like i said this is something I just tried for the heck of it and it worked but I dont guaranteed it will work for everyone. I have tried this on the Tytn II and now I just received my Tilt and it works good.
If there was a way to just re-enable the MMS portion I think there wouldnt need to install the slightly older version of arcsoft composer viewer but I havent able to figure it out..
PS. I tried uploading the zip files but it keeps telling upload of file failed..
Can you e-mail me those files, please.
Hi, is someone able to upload these files somewhere?......thanks in advance
ok here they are.. Let me know if they work for you
http://rapidshare.com/files/61245824/MMSsetup.zip
Thanks doug0365, i will have to do a full backup first on my kaiser before i install the files......its missing the threadersms.cab though....but thats ok i found the file in the kaiser forum.......will report back later today of the outcome.....thanks again.

Skype Video

Hi,
I have just installed the latest skype on my kaiser and it is all working well, but can you not have video calls (through wifi) with the front camera i cant even see the other persons picture am i missing something or does it not support video?
Thanks
Jason
Correct, not supported.
Cheers
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
hi can you give me a skype download link?
www.skype.com ?
ye got 2 very old cabs here
SkypeForPocketPC.CAB
07/28/2008
and
SkypeForPocketPC_LowCPU.CAB
05/14/2006
I found a cab of the 2.2.0.18 version which works fine with my tytn. Thanks!
Inspector-Gadget said:
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
Click to expand...
Click to collapse
have you tried skype 3.0???? It works well with me without crashing, try it and maybe it would be better
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
gazzacbr said:
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
Click to expand...
Click to collapse
http://rapidshare.com/files/349576424/SkypeMobile.exe
But I'm not sure if it even works in UAE. Afaik they block the ports over there

Getting Name Display to Work

Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phone does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. Please see:
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me.
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian susbcribers like myself.
Thank you very much... Looking to get the name display working!!!!
Getting Name Display to Work [bounty available]
Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phones does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. (a detailed instructions for chefs to implement it is already available in the link below):
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me. However, he is welling to help any person...
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian subscribers like myself.
Thank you very much... Looking to get the name display working!!!!
I'll be more then happy to contribute 30 US dollars via paypal who ever gets a CAB working. other people are welcome to contribute money wise.
how can I get someone to help me with it? I'd really appreciate any help...
thanks
Check my profile , contact me with msn
I will try to help
Cheers..!
Try using this .CAB. It should be universal for most HTC-based WinMo 6 devices, as it works on my Xperia.
Hope that helps!
It did not work :'(
would anyone know why?
thanks
iamcanadian said:
It did not work :'(
would anyone know why?
thanks
Click to expand...
Click to collapse
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Rogers Name Display worked on Tilt2
efrant said:
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Click to expand...
Click to collapse
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
shinku said:
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
Click to expand...
Click to collapse
Well, I did the same thing you did, and I get the same results. Strange that the name is displayed in Sense only after you answer the call...
Hopefully someone will be able to figure it out.
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
mhtoto said:
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
Click to expand...
Click to collapse
So far no one has gotten it to work properly using an HTC dialer. If you don't mind using the WM dialer, then it works just fine.
Thanks, I did get it working with WM Dialer.
For other noobs, here is how to switch from HTC to WM dialer:
/forum.xda-developers.com/showthread.php?t=364297[/url]
And how to get to the registry:
/forum.xda-developers.com/showthread.php?t=475141[/url]
[just put the http:/ at the beginning of the links above, because I'm new I cannot post full links]
Then run the .cab file posted in this thread.
cheers.

EnergyROM can't add a MMS server?

hey everyone. I flash EnergyROM two days ago, and I'm facing a rather important bug that trouble me, I can't add a MMS server from Messages - All Messages - menu - Settings - Options - MMS server, when I click "new" to add a new MMS server, there is not any response, nothing happens. I wonder if some other guy who flash the same ROM is facing the same problem and how can I fix it? THX very very much!
Here is my machine's information, SE X1 with EnergyROM KOVSKY 20090914 StandardM2.5.
Shouldn't you ask this in the EnergyROM thread rather than start a new thread?
ipporek said:
Shouldn't you ask this in the EnergyROM thread rather than start a new thread?
Click to expand...
Click to collapse
I'm sorry but There are too many replies in EnergyROM thread..
i m having the same problem, but a little bit different, i can set up the mms server, but it does not work in any way, i was searching in registry and found many entries with HTCs servers, cingular servers, but i m brazil, and cant put the mms to work, even changing tre registry entries, but as i dont know very well how to manipulate the registry its still not working, both ways sending and receiving
MMS Issue with Energy ROM
Yeah.. I totally love this particular rom of all the ones out there and picture messaging hasn't worked for me either.. I'm U.S.-ATT
I've actually been sending via email as a work around because I like the rom that much.. Hope this does get resolved...
That problem is due to the leo message app? I have never really got mms working properly when using different roms with it cooked in. Try setting up the connection manually.
Well, i had already tested the jack4.x rom, MultimediaOS from KidDc(i think) and this perfect and bealtiful energy rom, and the only one that was able to send mms was the multimediaOS, but the ROM is ugly and still imature, no good for me...
Im using the operator TIM here in brazil...
if anyone has the solution...
I dont know too, if the energyROM already comes with arcsoft, or it attempts to send via other software(because in system/remove programs, it does not show nothing)
PS: in the multimediaOS the arcsoft version was 5.0.43.98, but neither google could find it...
here is the only solution :-
http://forum.xda-developers.com/showthread.php?t=556614
Regards
newstar said:
here is the only solution :-
http://forum.xda-developers.com/showthread.php?t=556614
Regards
Click to expand...
Click to collapse
THANKS. It really works. but with a pity that can't use HTC message, I love the beautiful looks.

Categories

Resources