New SIP/On screen keyboard: ZoomBoard - Tilt, TyTN II, MDA Vario III General

http://www.4winmobile.com/forums/wi...13031-get-keys-keyboard-zoomed-zoomboard.html
From Vito Technology. Credit to 4WinMobile.com for the announcement.
Looks interesting. In the quest for the perfect SIP, this is another entry. I tried it. Its nice, but still the buttons are too small for finger use. Would be nice if it can be skinned. But don't think it can be...It comes with a 14-day free trial. Then its $10...

My views are very similar to those of Jomo25's. Tried it very briefly but was enough to conclude that it needs a larger button skin for accurate typing. The magnifier concept is though very good but can only benefiting if the buttons were larger.
So for the time being Cootek's TouchPal remains the SIP of choice as far as I am concerned

I installed it yesterday and already used it a couple of times. In terms of reliance, nothing beats the slide out keyboard. That said, I very much like the fact that the numbers are laid out at the top of the zoomboard, very much like the desktop keyboard. The set of symbols is more complete than the keyboatd that comes with WM6. Overall, preferrable to the native WM6 application.

A warning to other users:
Tried this keyboard on my HTC Touch for about 30 seconds, pressed the language button (en) and it froze my device, only way to reset it was to pull the battery.
My device was performing INCREDIBLY SLOW so I had to end up wiping the phone with 'Clear Storage' (took over a minute to respond to even using the start menu).
The program still has reminants left on the phone as it appears to install itself partially on the ROM of the device.

cbuttery said:
The program still has reminants left on the phone as it appears to install itself partially on the ROM of the device.
Click to expand...
Click to collapse
An app can't install itself in the "ROM", you have to flash to do that. What probably has happened is that the uninstall didn't clean out all the registry entries and there are bits of it left in there. You might try the demo of MemMaid and have it go through your registry. It may clean that part up.

vito tech is notorious for bad uninstalls. The image of the app was enough to get to me to click the link to see what it was, but as soon as I saw the Vito name, I quickly dismissed it. I haven't used vito stuff for a while so maybe the issues are not the same but after reading the above post about it leaving artifacts in the registry, well that sounds about on par with what I remember.

I installed it but couldn't get it to run on my Tilt. It simply refused to load up.

Related

Thumb-friendly keyboard (PocketCM alternative)?

PocketCM is good, but I'm looking for something better. Even though PocketCM doesn't require a stylus, I'm still having a horrible time typing with it.
What I'm looking for is a thumb-friendly, on-screen keyboard that'll take advantage of predictive text to allow larger buttons. Something like the Blackberry Pearl keyboard (1 or 2 letters per key), or even the traditional phone pad (with 3-4 letter per key) would be enough.
Anyone have a suggestion?
cootek touchpal is the best i've tried.
its all over these forums should be easy to find
Johnston411 said:
cootek touchpal is the best i've tried.
its all over these forums should be easy to find
Click to expand...
Click to collapse
Thanks! Searching now.
Here's the link to Cootek Touchpal, its the best http://forum.xda-developers.com/showthread.php?t=334437
Did you spell it right? A search revealed nothing...
**EDIT
Got link, thanks!
Thanks for the recommendation! It works great!
Three questions:
1) Is this free until December, when I'll have to register it?
2) Is there any way to move the space button to the center (and why is it on the left in the first place?)
3) What is "precise" mode supposed to do?
Flapjack said:
Thanks for the recommendation! It works great!
Three questions:
1) Is this free until December, when I'll have to register it?
2) Is there any way to move the space button to the center (and why is it on the left in the first place?)
3) What is "precise" mode supposed to do?
Click to expand...
Click to collapse
hold down the spacebar and drag to the middle and it'll move
precise mode appears to take away predictive text so you have to rely on finger slides to get the right characters.
gadgetluva said:
hold down the spacebar and drag to the middle and it'll move
precise mode appears to take away predictive text so you have to rely on finger slides to get the right characters.
Click to expand...
Click to collapse
Thanks for the tip. I tried precise mode after I posted an it was horrendous.
I'm still getting used to the program. There are a few things I don't like about it:
1) It takes up a lot of screen space. I would like to see a smaller key option
2) It doesn't always remove itself from the screen when you leave a text area
3) There is no way to spell words efficiently, for example:
I wanted to type "download". I enter "down", but as soon as I hit the "L" button, the letters "down" change to something else. You have to accept "down" as the word, backspace over the space that is automatically entered, then finish the word. PITA.
It's not for one thumb but Spb Full Screen keyboard is the best I've used. I actully don't use the Kaiser keyboard and type 3 times faster with Spb. Also try Tengo its a one thumb kb with big keys.
Touchpal is nice ive used it before.. Im still waiting for PocketCM to release a newer versions as i had some issues with the current version..
As for another one, I flashed my Tilt to the AKU cooked rom thats floating around the forums and there is actually a SIP that is a phone pad that supports T9 input and I find it very handy and works well for one handed operations!
Touchpal is the best in my opinion. Once you get the feel of it you can really type fast.
Yes a slight reduction in hight would be good. I suggest if they half the height of the top row which contains the various options we could benefit with some more screen real estate.
try to go to the htc asia website and download the official phone pad from HTC! I really find it useful!!
where can i get Spb Full Screen keyboard ?
gimini said:
where can i get Spb Full Screen keyboard ?
Click to expand...
Click to collapse
Here;
http://www.pocketgear.com/en_US/htm...Page=searchResults&id=prod5702026&sf=48190044
thank you. you guys are always so fast to help
If you buy the PRO version you can do that
This is the website:
http://www.cootek.com/index.html
srmz said:
Touchpal is the best in my opinion. Once you get the feel of it you can really type fast.
Yes a slight reduction in hight would be good. I suggest if they half the height of the top row which contains the various options we could benefit with some more screen real estate.
Click to expand...
Click to collapse
What about Resco Keyboard ?
Flapjack said:
Thanks for the tip. I tried precise mode after I posted an it was horrendous.
I'm still getting used to the program. There are a few things I don't like about
1) It takes up a lot of screen space. I would like to see a smaller key option
2) It doesn't always remove itself from the screen when you leave a text area
3) There is no way to spell words efficiently, for example:
I wanted to type "download". I enter "down", but as soon as I hit the "L" button, the letters "down" change to something else. You have to accept "down" as the word, backspace over the space that is automatically entered, then finish the word. PITA.
Click to expand...
Click to collapse
yeah it is a slight learning curve, but once you get used to it it'll be the best sip out the there! I got the same thing when trying to spell download, but after spelling out by using the sliding function, it showed up everytime when using the predictive mode! it just takes a little getting used to!
Well, now that I've been using it for a while, I have several big problems. I don't know who to blame (M$ or Cootek), but here they are:
1) The program will only work if I use it in conjunction with sipchange. Once I do that, I cannot select any other keyboard. They come up in the choice list, but if I select them, nothing happens. So I'm stuck with it. If I'm using the stylus, I prefer the standard windows keyboard, which is why this is an issue
2) The program does not go down and stay down. Unlike the standard windows keyboard, TouchPal is always popping up in your face. It drives me nuts, as I only seem to actually need it 1/4 of the time it decides to pop up. It seems to take 2-3 times minimizing it for it to finally stay down... and when it does, it can pop up again for absolutely no reason.
3) It may be the most the most intuitive keyboard, but it's still not very "finger-friendly". I don't consider myself to have unusually large hands, but I still cannot reliably hit the right key every time, even when I'm careful. Another thing it will do is detect a capital letter (diagonal motion) when I very clearly touched it without a swipe. Not sure why this is...
I'm still in search of something better....
princeasi said:
yeah it is a slight learning curve, but once you get used to it it'll be the best sip out the there! I got the same thing when trying to spell download, but after spelling out by using the sliding function, it showed up everytime when using the predictive mode! it just takes a little getting used to!
Click to expand...
Click to collapse
gabriel31337 said:
What about Resco Keyboard ?
Click to expand...
Click to collapse
I'm curious about the same thing. I love the Fx mode that the Resco keyboards offer.

Revolutionized Touchflo

Looks like the new and revolutionized touchflo is here and from the looks of it, it looks super nice but costs money. Here's the link: http://www.ftouchsl.com/Default.aspx
If you've tried it out, please give us feedback.
The homepage gif doesnt really hilight the power of this tool.
Looking at the videos/infos is way more complete...
I'll give a try ony my Kaiser (the easy scrolling a-la iPhone is interesting)
Forgive my cynicism, but.... I can get my Kaiser to do finger scroll in most applications with TouchFlo. It doesn't look as smooth, but I was under the impression that had something to do with the shoddy screen refresh rate due to poor driver support (see stickies) and I am not entirely convinced that program is being demonstrated on a similarly crippled device...
Furthermore, the flash file on their front page seems to imply that they have some form of gesture recognition software running. The videos, however, do not demonstrate this, only the scrolling....
Dammit I need to be more trusting....
can our handicapped device handle this?
Cavey.co.uk said:
Forgive my cynicism, but.... I can get my Kaiser to do finger scroll in most applications with TouchFlo. It doesn't look as smooth, but I was under the impression that had something to do with the shoddy screen refresh rate due to poor driver support (see stickies) and I am not entirely convinced that program is being demonstrated on a similarly crippled device...
Furthermore, the flash file on their front page seems to imply that they have some form of gesture recognition software running. The videos, however, do not demonstrate this, only the scrolling....
Dammit I need to be more trusting....
Click to expand...
Click to collapse
No you don't. Thank-you for raising these rather interesting points. I'd love to have this, but I wouldn't want it messing with my TouchFlo cube...I like the cube, its something cool to show people so they can "Ooooooo....AAaaaaaahhhhhhhhh...."
The device in the videos looks like an HTC P3600. It runs WinMo5 and uses a Samsung processor. I'd guess this doesn't run as nicely on the Kaiser.
joshuah82 said:
The device in the videos looks like an HTC P3600. It runs WinMo5 and uses a Samsung processor. I'd guess this doesn't run as nicely on the Kaiser.
Click to expand...
Click to collapse
Agreed, but you may find that the Qualcomm chipset (as used in the Kaiser) is undermined by the software support for DirectDraw thereby making the Kaiser appear slower despite superior hardware. If the software support was there, you may well find touchflo itself is as smooth as this program. Until I see vids of it on a Kaiser or confirmation that it is pukka, I wont be touching it.
I'm sure someone will try it and let us know if it is kosher soon enough.
Testing
I installed the demo.
Call me Placebo Pete, but I'll be damned if overall scrolling isn't smoother. PIE scrolls MUCH smoother, scrolling the file system is still a bit doggy, but smoother overall. I have Touch Commander as my "cube" launcher and its much quicker to draw.
Overall, there really may be somthing to look at here. YMMV. I'd be interested in what others think.
I also run PointUI, which also seems to have benefitted. PointUI has always been smooth because its still a bit bare bones, but now I'd say its downright spritely!
Does this product interfere at all the TouchFlow Cube? I have Slither's version. Should Cube be de-installed to run this program or are they fully compatible?
Cavey.co.uk said:
Agreed, but you may find that the Qualcomm chipset (as used in the Kaiser) is undermined by the software support for DirectDraw thereby making the Kaiser appear slower despite superior hardware. If the software support was there, you may well find touchflo itself is as smooth as this program. Until I see vids of it on a Kaiser or confirmation that it is pukka, I wont be touching it.
I'm sure someone will try it and let us know if it is kosher soon enough.
Click to expand...
Click to collapse
why wait for a video on a kaiser...isn't that what the demo is for...so you can try it for yourself rather than just speculate...not flaming, just saying...
If anyone tries the new FTouchSL app on your Kaiser/Tilt, please post your results here. I tried it (in demo mode) earlier today on my Tilt and experienced many a touch screen freeze. The settings area includes an option to disable TouchFlo, which I did...and when I'd test the new scrolling in PIE or Contacts, it would scroll (beautifully, I might add! Much smoother better than TouchFlo IMO) but would then freeze after just a few swipes. I'm curious if I'm in the Kaiser/Tilt minority when experiencing these bugs. Thanks!
I have not seen any freezes or lockups yet.
strikeIII said:
why wait for a video on a kaiser...isn't that what the demo is for...so you can try it for yourself rather than just speculate...not flaming, just saying...
Click to expand...
Click to collapse
Given I just broke my phone (cracked the screen) and had to re-install I don't want to mess with it quite yet.
My main point was that for some people, even if they use this software it wont improve matters because of the driver issues. This might lead them to blame the software (PocketCM worked well on my Hermes, not so well on my Kaiser) when in reality the software is fine, it's the drivers that have problems.
Some of the posts here are encouraging, but I can't quite understand how the software would improve Nick's touch commander and pointui exprience.
If I develop some courage and find time I will try and install it with some before and after shots. I can't be a Negetive Nancy forever....
Does this software interfere with the Cube? Can they co-exist?
So I finally managed to install it :
- First attempt, the Kaiser was unresponsible. Shutdown / restart.
Then didn't find where to restart the welcome wizard...
- Uninstalled, reinstalled : now I follow the wizard
- Scrolling to line 50 is ok...
- Selecting multiple lines won't work.
- Gestures "down-up" ... unable to do it neither (cannot press exit nor next)
Start Menu still works (from the hard button), but I can't select anything with the touchscreen...
I tried from the Program icon to disable the app, no way... Still won't give my touchscreen back.
I'll uninstall it.
sebbes said:
So I finally managed to install it :
- First attempt, the Kaiser was unresponsible. Shutdown / restart.
Then didn't find where to restart the welcome wizard...
- Uninstalled, reinstalled : now I follow the wizard
- Scrolling to line 50 is ok...
- Selecting multiple lines won't work.
- Gestures "down-up" ... unable to do it neither (cannot press exit nor next)
Start Menu still works (from the hard button), but I can't select anything with the touchscreen...
I tried from the Program icon to disable the app, no way... Still won't give my touchscreen back.
I'll uninstall it.
Click to expand...
Click to collapse
Is that the demo or bought version you tried?
Demo of course, I won't buy something that didnt convince me
Problems here too
Hi
It installed fine, but when I got to the "gesture" step in the config wizard it hung and I could no longer use the touch screen.
I restarted and all looked fine, it felt much more responsive but then the touchscreen stopped working again. I could still use the hardware buttons, so I uninstalled it and my touchscreen came back (after a further restart of course!).
I am using Dutty's V3 ROM, so perhaps there is some incompatability somewhere.
I have installed the demo, and I must say, there is a noticeable difference in the smoothness of the scrolling versus using the default HTC ftouchflo. Also I was able to complete the tutorial with no hitches. I had the cube installed at first, and I couldn't sense any conflicts between the two. This app will conflict with the scrolling feature of the HTC Ftouchflo (obviously), but after you do the tutorial and it brings you to the setup page it gives you the option to disable the default touchflo scrolling. I have yet to determine which gestures I would like to use, so I haven't configured those yet. Overall I'd say this program is a lot better than the one HTC supplies. I would gladly pay 10 or 12 bucks for it. I wonder how much it costs. hmm let's see.....
20 Duckets!!
I guess I'm gonna hafta play with it some more to see if i really want to lay down 20 bucks for it.
philteale said:
Hi
It installed fine, but when I got to the "gesture" step in the config wizard it hung and I could no longer use the touch screen.
I restarted and all looked fine, it felt much more responsive but then the touchscreen stopped working again. I could still use the hardware buttons, so I uninstalled it and my touchscreen came back (after a further restart of course!).
I am using Dutty's V3 ROM, so perhaps there is some incompatability somewhere.
Click to expand...
Click to collapse
Philteale and Sebbes, sounds like we're having identical screen freezing problems. I think the scrolling - when it works - is a lot smoother than TouchFlo...unfortunately, it keeps freezing.

SPB Mobile Shell 2.0 (What do people think?)

Just curious what people think about this app? Currently I am using Slueth v3.0 and love it but am looking for a little more customizability.
nothing exciting for me
I think it is great I have stopped using Pocketplus and InesoftAddressBook. I am very happy with it, took me a couple days to really get used to it.
-McMex
Me too
I think it's the best ready to use application. Install and enjoy
But on the now page, bluetooth and wifi state are missing
its ok not to wild about it
I tried it for 2 days and really like the fuctionality of it. BUT I had to remove it because it slows down the switch to phone enough that I have missed over half of my calls. It will ring only for about 5 seconds even though the caller can hear it ring for about 25 seconds. So even if I am fast in getting to phone it has already gone to voice mail. I removed it and now everything is back to normal.
JohnKHome said:
I tried it for 2 days and really like the fuctionality of it. BUT I had to remove it because it slows down the switch to phone enough that I have missed over half of my calls. It will ring only for about 5 seconds even though the caller can hear it ring for about 25 seconds. So even if I am fast in getting to phone it has already gone to voice mail. I removed it and now everything is back to normal.
Click to expand...
Click to collapse
I think u need to check your phone... I've had 2.0 since the beta leaked and no problems whatsoever! Runs smooth, doesn't slow down my device at all, everythings perfect.
To be honest the programs more for an "oooh" factor then functionality, it'll always be easer to pull out the stylus and do it the good old fashioned way. BUT it does help a BUNCH when driving...
To the original poster, theres a 14 day trial from SPB, why dont u try it, see what u think. U don't like it? then simply uninstall it.. no harm done.
i like the interface but one thing i feel that the smart gesture doesn't work on my tilt somtimes, i need to try very hard to call out the interface (something similar to alt-tab in pc)
overall, i am happy with the functions
The gesture works best if you start at the 'start' icon at the top and drag your finger to the middle of the screen.
I think it's a great program, I keep finding things I like. It works better than HTC's touchflo in my opinion.
Cheers
Its a bit of a step down in some cases, You cant have as many tabs as pocket plus, and you cant add more than one plugin. In fact I found that if you install SPB Mobile Shell and remove it from your home screen, that pocket plus allows you to add many of the unique Mobile Shell tabs but with more customisation such as adding additional content to the tab.
I quite like the quick screen you get while switching on from standby but it doesn't always work and seems to argue with the homescreen about who opens up, also it would have been great if you could literally have this screen as a homescreen. Rather than having a hybrid of the two.
Im dissapointed, I think there are much better innovations being made to homescreen customisation that this, and it looks very little different from SPB MS 1.0.
a bit bum then really.
See the long running thread in the general section.
Redundant thread, killed...

how can i see the uptime of WM?

is there a way that i can see the uptime of my Tytn2?
it looks like my tytn2 is (soft)resetting itself.
i had a few times now that i had to enter my PIN again. So when it happens again i want to look at the uptime.
Does anybody know if this is possible, ether by installing software or by default in Windows Mobile(6.1).
after some more searching i desided to look for a program to display uptime, pitty that windows mobile doesnt have it itself.
I tried 2 programms now, but they both are not giving the correct time after some time.
Till now i tried uptime meter and myuptime.
If anybody knows one that works correct with WM6.1!?
I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php
kilrah said:
I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
I'll check this out too, I'm always curious how long the phone has been up myself. No negative effects from this program I assume?
I wrote a MortScript to record bootup time at startup, but never got around to writing something to then compare current time to the last recorded time to get uptime.
khaytsus said:
No negative effects from this program I assume?
Click to expand...
Click to collapse
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...
kilrah said:
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...
Click to expand...
Click to collapse
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.
khaytsus said:
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.
Click to expand...
Click to collapse
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly
stylez said:
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly
Click to expand...
Click to collapse
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!
khaytsus said:
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!
Click to expand...
Click to collapse
Glad you like & got it tweaked, makes me wonder why M$ doesn't make things user friendly in the first place? "we all know the answer to that"
Know what you mean about forgetting, everything has become second nature to me now "mind u found it a test of mem writing it down"
Oh yeah in the install directory is a .cfg file back it up somewhere so if you ever flash again or have to hard-reset you don't have to set everything up again
Read first
little advice for those of you, like me, who like to download and install before reading. do not install the free version of aebplus on your kaiser, program won't work, and you will have to do hard reset to bring back some of your hardware buttons.
You need to use the current version (2.6.6), and simply leave it unregistered. I don't really know why he leaves that 4-year old 1.0.1 version available.
excellent, it works great, thanks.
AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
Sometimes buttons are being completely ignored, or very slow to respond.
StyleTap doesn't receive remapped button presses at all
Scrolling with the volume button seems to randomly lock up the PPC requiring me to pull the battery (soft reset won't do)
Soft resets in general are very finicky, having to do them multiple times for the phone to finish booting
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.
khaytsus said:
AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.
Click to expand...
Click to collapse
Strange i imagine it is something else that is affecting AEButton Plus, i'm running M2D the only issue did have was with regards to OK button, wanted to map long press to Wi-fi and double to BT for convienience, but found that Wi-Fi would be very much a pop shot on load but double press and all fine.
(nothing against aebuttonplus here.. but u do have to register it, and its meant to handle button assignments) lets bring this thread back on topic shall we. showing device uptime.
I wrote a mortscript that shows you the current uptime... it does exactly what your looking for without having to install a whole program to do it (assuming you have mortscript installed already)
the link is in my sig. -cope

Dialer Fix

I often describe my Fuze as a great PPC but lousy phone. My biggest complaint is the dialer. The biggest issues are the keys being too small and the keys blacking out during a call.
I have installed Nosleep and TouchInCallScreenTweak with mixed results.
I few months back I saw a post on Iconsoft Phone Extension and ignored it as it cost $. I saw a post again on it the other day about the release version and tried it. I may be hooked. It has Dialer, Contacts, Call History, and Favorites tabs and is pretty customizable. The best thing though is the dialer. You can actually dial a # key, credit card number, etc., while in a call. The keys are large enough so I don't mis-dial too.
It is worth the two week free trial. For me, I think I'm going to spend the $25 to keep it.
It's here:
http://iconsoft.com/?language=en&menu=ab6edc6b63d1a291
and NO, I don't work for them.
You sure you don't work for em?
Saw the exact same post on the at&t forums site.
Oh, now I see why LOL......I'd do it to, if it would save me 25 bucks
You can get an Iconsoft Phone Extension license in several ways:
* Post 5 new topics on the subject of Iconsoft PhonEx on Internet forums dedicated to the relevant subject, with a link to www.iconsoft.com
or
* Post 1 video on YouTube, telling of the advantages of the Iconsoft PhonEx + 2 new topics on forums dedicated to the relevant subject, with a link to www.iconsoft.com
or
* Publish positive article on a resource dedicated to the relevant subject, with a link to www.iconsoft.com
I paid my $25
and thought I would share. If you would like, I'll attach my PayPal receipt.
Iconsoft 1.4 is absolutely awesome I'm using it with energy ROM 6.5, because original HTC dialer conflicts with WM 6.5. That's the way, how should look contact's application And 25 usd isn't very expansive
I have to say, when I tried it out, I thought it looked quite nice, although I'm not sure it gave me much more than the standard dialer for my use. However, although I didn't seem to be able to uninstall it (so be careful of that, if you are just trying it out), it did work with my Touch Incall Screen Tweak as long as you got it to switch the screen off during a call in the first place. If you don't do that, it seemed to prevent the screen being switched off completely, and just allowed it to be dimmed.
Cheers,
Steve.
With version 1.4 and some alternative skins available, I am now very satisfied with its function. I especially like the the fact a Speakerphone button is available and you can get the Keyboard back in view easily if you have to enter a digit to do something.
It is a shame people get flamed for talking about it. Iconsoft's marketing ploy was a dumb move but the product is has made my Fuze finally usable as a phone.
For those that want to try it, search for it. I'd post the link but then I'll get flamed again. I've attached a screen capture of the Dialer. The new skins come in Red and Green too.
does iconsoft phonex 1.4 allow th call recording feature? (ICR) thx.
There is another alternative which in my view is better. I have tried both extensively.
Take a look here: www.inesoft.com and look at Phone 4.
I have been using Inesoft Phone 4 for quite some time. It works great with 6.0, 6.1 and 6.5. I would not run any phone without it. In fact, I bought 2 licenses for the same phone, but that is a different story.
Be advised however, that the great big buttons you see for dialing are only available when you start the call. Once the call is connected, the normal system dialer is what is available. So if you have to check your office voicemail for instance, you can start the call with the big buttons, but once connected, you will be back to the small standard system dialer buttons. Not a problem for me as almost everything is on speed dial.
Even with that flaw, this is a great app. I can honestly say that I think it is the most well though out application from a users perspective that I have ever seen on the WM platform. They have a generous trial. Give it a try and you will see what I mean. Be sure to fill the first page of Favorites and you will notice that it automatically creates another one. Also, look how easy they made it to rename your favorite buttons. Lots of little things that show how much attention they pay to details.
Oh, one other thing, it has never crashed or caused any problems on my phone in about 9-12 months of use. Now that I think about it, it is kind of embarrassing, but in this time period, I have used 3 different phones (eTen G500+, x500 & Fuze) all with the same great results from this app.
Happy trials.
Doug M.
Have you tried inesoft to compare the phone 4? I hear that's good as well. I can't seem to figure out how to add favorites. Does yours work in WM 6.5?
One question for the inesoft Phone 4.
Does it have a slider for answering calls or only press buttons?
1999TL said:
Have you tried inesoft to compare the phone 4? I hear that's good as well. I can't seem to figure out how to add favorites. Does yours work in WM 6.5?
Click to expand...
Click to collapse
I figured this out. When I went into contacts, I would press the favorite button. This just brought me back to the favorite menu. In the contacts, you have to select the contact, then press "edit", then add favorite.
Contacts Changer
I've had this program for a while. When you add contacts to WM there backwards unless you put them the other way.This app will swap them back.
Each time you add a new contact run contact changer and swaps them. Used it on my 8525 and now my fuze. I'm not for sure where i got it but theres a website at the bottom of the app of who ever made it to give credit.
Thought some body else might want it. Didn't want to start a new thread
An unstated feature of 1.4 is that it adds back the BT status icon to the Taskbar. The BT status indicators are called by the HTC Dialer. Took me along time to finally figure that out. Using the WM6 or other alternative dialers nukes them. PhonEx adds them back though BT Discoverable does not have a separate icon. I think the status icon is a must as my Fuze provides no other clues that BT is On. I don't want BT left On when on Battery.
PhonEx also plays nice with PocketShield although you must tweak their redundant features. PocketShield is a great app that disables unintended button presses while fumbling with your phone as it comes out of your pocket, case, purse, or wherever you carry it.
Adding NoSleepRaphael and TouchInCallScreenTweak has finally tamed my unruly Fuze.
My great PPC but lousy phone is now much better. Downside is having to pay bucks to get a workable phone that wasn't cheap in the first place.
I have been using iconsoft PhoneEx for a while and think it is handdown the best dialer I have ever seen.. The search function for contacts (I have 100's) work smooth and easy, the full screen cid and slide up to answer are all great.. The only 2 complaints I have are you can not reject a call with a text message, and i am seeing some conflicts with the standard MS dialer using NRG's ROM but all in all it makes using the phone much easier to use..
Has anyone else seen the conflicts with MS dialer (usually upon hanging up a call) or missing a call...
I'm using the stock AT&T Fuze ROM. PocketShield shows the MS Dialer enabled by PhonEx. I am not seeing conflicts but then the Fuze always seems finicky. I have learned to live, maybe tolerate is a better word, with it.
Phonex is very solid right now making me scared of a new version.
only press buttons. i have used both quite a bit and must say phonex is much better imo. i find inesoft to be visually ugly and not very responsive. scrolling is not nearly as smooth as phonex.
just my .02

Categories

Resources