Hello, I introduce you Hack for GPS to have better data, even quicker and finer!
To make this, it is necessary to have recovery mode (clockworkmod v3.x / v4.x / v5.x) and to have rights root!
* For lovers of fiddles with his Windows :
Let' s Go!!!! ¦
..................->
........................ Then they agree that GPS.CONF of base is this one:
Code:
NTP_SERVER=north-america.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com
SUPL_PORT=7276
........................ Then now, veiled modification brought in the file GPS.CONF:
Code:
NTP_SERVER=0.fr.pool.ntp.org
NTP_SERVER=1.fr.pool.ntp.org
NTP_SERVER=2.fr.pool.ntp.org
NTP_SERVER=3.fr.pool.ntp.org
XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
# Report supl ref location as position, 1=enable, 0=disable
REPORT_POSITION_USE_SUPL_REFLOC=1
# Wiper (wifi positioning), 1=enable, 0=disable
ENABLE_WIPER=1
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=7276
SUPL_SECURE_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
#################################
##### AGPS Carrier settings #####
#################################
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE
Here there is fr, it is for used servers! Now, you can choose them here: http://www.pool.ntp.org/en/
If you travel there europe a lot, has the place of "Fr" put "Europe"! He will be based on those of Europe.
Code:
NTP_SERVER=0.fr.pool.ntp.org
NTP_SERVER=1.fr.pool.ntp.org
NTP_SERVER=2.fr.pool.ntp.org
NTP_SERVER=3.fr.pool.ntp.org
* For slackers :
Let' s Go!!!! ¦
..................->
........................ Then there, it is the prerequisite in the recovery! Small flash, etc...
* Install the .zip with the recovery
* Reboot
* Install GPS status (or others apks), activate your GPS, you must do "delete gps data", but open the apk in order to force the download of lasted data gps.
Wait
Link : http://www.multiupload.com/31U9FDKODN
------------------------------------------------------------------------
Undo : http://www.multiupload.com/9DKR7JLQUG
------------------------------------------------------------------------
Here is my post on the forum Frandroid !
http://forum.frandroid.com/topic/52821-fix-gps-full-speed/
Reserved
Traduction the topic frandroid in english : http://tr.voila.fr/traduire-une-page-web-frame.php
Thx to Samdroid, & Sucka
Thanks for sharing
Sent from my Nexus S using Tapatalk
There is nothing to fix. I get a lockon everytime in under 5 seconds.
Vandam500 said:
There is nothing to fix. I get a lockon everytime in under 5 seconds.
Click to expand...
Click to collapse
dude just cause u get fix's quick dont take a dump on the guy....
mak213 said:
dude just cause u get fix's quick dont take a dump on the guy....
Click to expand...
Click to collapse
lol that's just graphic.
i tried this zip and now it's faster the fix! thanx a lot!!!!
the gps doesnt lock in as well as my N1.. as the N1 WOULD BE AS LOW AS 3 meters away... with the NS i'm usually aroun 10-15 meters away... and kinda sucks with directions... at times it looses signal, and jumps all over the place... gonna flassh will update on any improvmemnt
Vandam500 said:
There is nothing to fix. I get a lockon everytime in under 5 seconds.
Click to expand...
Click to collapse
I have some lockon problems, so I might try this fix.
now i lock in in 5 seconds....
before it took me 15-20 sec!
LBSTestMod.apk
What is this?
iamxeph said:
LBSTestMod.apk
What is this?
Click to expand...
Click to collapse
Why do you care?
Do you think it's a virus or something?
dario3040 said:
Why do you care?
Do you think it's a virus or something?
Click to expand...
Click to collapse
No. Just curiosity.
Cool !
Thx at Sucka on Samdroid !
I just changed a little the GPS and I do a .zip for the Nexus S !
Edit :
LbsTestMode is a application in order to fix the GPS with the GPS.conf !
Use this tutoriel :
After the installation of the .zip
04. Via Home, create un raccourci perso to Activities>LbsTestMode>.LbsTestMode (the first Lbs)
05. Launch LbsTestMode
06. Go to SUPL/CP : put the serveur : supl.google.com , put the port 7276, secure mode : off, gps mode : supl
08. Go to "application settings", mettre "MS Based" dans "operation mode".
10. You must do "delete gps data" (or via GPSstatus)
11. Reboot the phone.
12. Install GPS status , activate the gps, and download the updates .
IT4ALii3EN said:
Here is my post on the forum Frandroid !
http://forum.frandroid.com/topic/52821-fix-gps-full-speed/
This post (on frandroid) is in french !
In order to have a better GPS, flash this .zip via recovery :
http://www.multiupload.com/J4CLWIIZND
Undo : http://www.multiupload.com/VKF5ZKO3VZ
So as to know what do the fix gps, read the post on frandroid with a traduction !
Click to expand...
Click to collapse
i never use internet connection to lock gps and it takes like 10 second.So i don't need it right?
First post is update.
Sorry for my english
IT4ALii3EN said:
Use this tutoriel :
After the installation of the .zip
04. Via Home, create un raccourci perso to Activities>LbsTestMode>.LbsTestMode (the first Lbs)
05. Launch LbsTestMode
06. Go to SUPL/CP : put the serveur : supl.google.com , put the port 7276, secure mode : off, gps mode : supl
08. Go to "application settings", mettre "MS Based" dans "operation mode".
10. You must do "delete gps data" (or via GPSstatus)
11. Reboot the phone.
12. Install GPS status , activate the gps, and download the updates .
Click to expand...
Click to collapse
Can anyone who know French please translate according to original text?I don't really understand what it means.
IT4ALii3EN said:
Cool !
After the installation of the .zip
04. Via Home, create a personal shortcut to Activities>LbsTestMode>.LbsTestMode (the first Lbs)
05. Launch LbsTestMode
06. Go to SUPL/CP : put the server : supl.google.com , put the port 7276, secure mode : off, gps mode : supl
08. Go to "application settings", put "MS Based" in "operation mode".
10. You must do "delete gps data" (or via GPSstatus)
11. Reboot the phone.
12. Install GPS status , activate the gps, and download the updates .
Click to expand...
Click to collapse
well, I guess it's what it means (haven't tried personally)
Yes, exactelly !
When we don't have the time, we do speed !
kirby_blue said:
well, I guess it's what it means (haven't tried personally)
Click to expand...
Click to collapse
1. In my Nexus S home, when i press and hold, the " Shortcuts, Widgets, Folders and Wallpapers" come out. I select Shortcuts, then cannot find anything like Activities>LbsTestMode>.LbsTestMode (the first Lbs). First step already stuck.
For some reason i cant install a number of apps. One being Handcent SMS. I've read that it's currently blocked from Play store due to a false copyright claim (or something along those lines).
The other one is a game installer.
In both cases i open the file explorer > select APK > open with package manager > it shows the usual permissions sceen with Cancel and Next/Install buttons but the Next/Install button does not react. It's not greyed out either. Cancel button works so it's not a touch issue with the screen (also doesent work in landscape).
Also certain built in features are not working and im not sure why. For example:
Settings > Accesibility > Switch Access > Ok (again Ok is not greyed out but not responding either). Cancel works.
I did find a few lines in logs that could explain this problem but im having trouble understaning what i can do to fix the problem:
Code:
W/AppSecurityPermissions(18100): Couldn't retrieve shared user id for: com.handcent.nextsms
W/ResourceType(18100): No package identifier when getting value for resource number 0x00000000
W/ResourceType(18100): Found multiple library tables, ignoring...
W/PackageManager(18100): Failure retrieving resources for com.handcent.nextsms: Resource ID #0x0
Current Firmware: 23.1.A.1.28
Model: D5803
Root: Yes (SuperSU 2.46)
Recovery: Yes (NUT's triple recovery ft. PHILZ/TWRP/CWM)
http://forum.xda-developers.com/xperia-z/help/unable-to-install-apps-apk-t2361942/page2 look at #12
MCBuhl said:
http://forum.xda-developers.com/xperia-z/help/unable-to-install-apps-apk-t2361942/page2 look at #12
Click to expand...
Click to collapse
Yep i figured that out some time ago. Tho i dont have Lux installed so it's another app most likely. Thankfully xposed+xinstaller module helps me to workaround this issue without disabling any apps.
Hello there
I finally completed installing Lineage OS to my Mi5 today, following all the official instructions on the Lineage os page.
Everything installed without error - however I can't connect to wifi!
When choosing the wifi network it says "Connecting" quickly followed by "Saved". Occasionally it will say "Authentication failed" or "Disabled".
I can't get it to connect to either 2.4ghz or 5ghz, and both of these were working fine in Miui Global stable rom.
Any insight would be wonderful.
Cheers!
Edit: solution down the thread.
Hi!
Have you tried to reflash rom?
Are you using stock LOS kernel ou another kernel?
Yes I did reflash the ROM once. I assume I'm using the default kernel, I haven't gone to any efforts to use another (I'm a noob )
Solution
Follow up - after much pulling out of hair and freaking out, this solution finally did the job:
https://forum.xda-developers.com/mi-5/help/wifi-connectivity-problem-t3517777/post70408866
All hail Pekkuky!
"This is what I did to fix my WiFi:
First prepare an new MAC-address. I personally don't know when a MAC-address is considered valid, so I just took one from an other device. I used the mac address of my previous mobile phone, which could connect to my router.
1. Disable WiFi.
3. Enable debugger settings (Setting>about Phone>Press build number repeatedly).
2. Enable root (Develepor settings>root access set to "Apps and ADB").
3. Open the file manager app.
4. Give the file manager app root access (menu>Settings(cog in lower left corner)>General settings>Access mode set this on "Root Access mode").
5. Now find the file root/etc/firmware/wlan/qca_cld/ and open wlan_mac.bin.
You should see something similar to:
Code:
Intf0MacAddress=XXXXXXXXXXXX
Intf1MacAddress=XXXXXXXXXXXX
END
6. Change the first to your new MAC-address, but first write down the old one, so you can change it back if this method doesn't work for you.
The last X of the next line should be a digit higher than the previous line. E.g:
Code:
Intf0MacAddress=957FDC328BF4
Intf1MacAddress=957FDC328BF5
END
(This MAC-address most likely won't work).
7. Save the file. You might need to press the save button a few times.
8. Check if the file has changed.
9. Check if you MAC-address has changed (Settings>WiFI>Configure-WIFI(cog in right upper corner)).
10. Enable WiFi.
I hope this works for everyone that has the same problem. "
I did some research and found a way to make the quick settings tiles disappear on the lock screen. Note that your device needs to be rooted using either SuperSu or Magisk.
The first thing you have to do is download Tasker.
On the Tasker app, make a new profile
Event --> Display --> Display Off
Now make a task, we will name this task "Hide Tiles"
New Task --> Code --> Run Shell
Now important, if you're rooted with SuperSu then use the first code, if you're rooted with Magisk then use the second one.
First code is (without quotes): "settings put secure sysui_qs_tiles 0"
Second code is (WITH quotes): /sbin/su -c "settings put secure sysui_qs_tiles 0"
This is the profile that will hide the tiles when the phone is locked, now we need a profile where it shows them after the password/fingerprint is used on the phone.
Go ahead and create a new profile
Event --> Display --> Display Unlocked
Now make a task, we will name it "Show Tiles"
(SuperSu uses the first code, Magisk uses the second one)
New Task --> Code --> Run Shell
First code (without quotes): "settings put secure sysui_qs_tiles wifi,cell,location,dnd,rotation,bt,battery,flashlight,hotspot,airplane,inversion,saver,cast"
(From the screenshot you will learn which name refers to which tile, you can then add/remove/reorder them however you want)
Second code (WITH quotes): /sbin/su -c "settings put secure sysui_qs_tiles wifi,cell,location,dnd,rotation,bt,battery,flashlight,hotspot,airplane,inversion,saver,cast"
If these codes don't work with Tasker, you can use them in Secure Settings but instead of (New Task --> Code --> Run Shell) you have to do (New Task --> Plugin --> Secure Settings --> Configuration --> Action --> Run Command)
The code you'll have to use is the one we used for Supersu (it will work for both Magisk and SuperSu users) but make sure you check the USE ROOT box)
I have tried this on a Nexus 5X running Oreo 8.1 OPM3 and it works every single time.
Let me know if you have tried this on your phone so we'd know which devices it works on. Thank you!
nice, but too bad it crashes on miui based roms
Worked with Secure Settings an Oneplus 3t, Skydragon-Rom.
Thank you! :good:
There are some Quicksettings i don't know the name to let it show after unlock. Can anybody help me?
The tiles from the first picture would be great to know the correct name.
This is very interesting, thanks for the question.
[REQUEST] "Disable / Enable module for once only" feature in MagiskManager ?
Some times I may want disable specific module for next reboot and want it automatic re-enabled.
I guess I could make another 'watchdog' module to delete the 'disable' file in the folder of module to be re-enabled, if Magisk does load modules in some order ( like according to module id from a-z ?) , but it would only work for the module id declared.
Maybe there could be an official 'Disable / Enable once' function integrated to current 'Disable / Enable' radio button?
It will looks like cycled between following status:
( ✓ ) Enabled
( X ) Disabled
( x ) Disabled Once
( 1 ) Enabled Once