Database Develop

Post Exteneded Rom Links Here.

We have lost the exteneded roms again.
This is the 2nd time that I know of.
I think this has to do with the fact that they were not linked to post thus unkonw files get killed. I read that some were when I first came here.
I have most of them and will start uploading them again, linking them to a post.
Anybody have a better idea or know why they have gone?

Not sure whether they've been deleted or not, unless you have been reposting. They are under BlueAngel_Roms instead of Extended_Roms. Things seem to keep getting moved.

And what are they doing there ?
Sure I have been uploading to ExtenedRoms for over an hour now.
I will move the buggers!
Rename The Folder Exteneded_Roms
Clean up the file names
Gee I love house work thought I was would be cooking in the Rom Kitchen, but no.
We are going to have to post the links as they got killed once before.
Thought you were out.

Can you belive this!
Got a folder name that says "Dont touch MDAIIIUser Uploading" and we have dowloades.
You around need so help.

ok done
cleaned up the Exteneded_Roms
Will post in the morning.
We need to take these apart and find what version they are then rename them.
ftp://xda:[email protected]/BlueAngel/Exteneded_Roms/IIs Asia WWE Ext ROM.zip
ftp://xda:[email protected]/BlueAngel/Exteneded_Roms/Seimens_SX66_Ext_ROM_ENG.zip
ftp://xda:[email protected]_MDAIII_Extended_Rom_Inc_DeviceInfo.zip

Do you need some assistance with the Excel sheet for ROM Versions and contained cab files?
Is there a neater way of structuring the ftp server directories? Is there any way of setting folder permissions on the server for read/write only and not alter/delete?

Bebbo
Do I need help in the Exteneded Rom Kitchen. Does the .... (ok no bad jokes)
Sure do BIG Time!!! Its not my kitchen, I just work there!
The Idea of the Kitchen is not realy to find out what version number Orange Rom A has for an application but to see if Orange's Rom A has application / Patches that are better than our base.
The Sheet just is a list of the files which go:
Base (I-mate) + Rom A + Rom B = Extended Rom Kitchen (ERK) Rom
My end goal is to generate a ERK Rom Version which is as upto date as possible.
And have this info on wiki so we dont need to hunt for it.
How far am I, Well The UK orange rom has been looked at but info not posted in the kitchen.
( I think RTP worked on that but I am not sure as I was haveing PMs with few people about that rom. )
We have the 3 roms above that need to be looked and info posted in the Kitchen and added to the Excel Sheet.
The Excel Sheet needs to be made to look nice so the rest of us can undersatand it.
We need to check against the "List of know Blue angels" to see what rom is missing and see if we can find it.
Oh yes and its friday, I get to pick my kids as its "The 3rd weekend of every month" and as my ex-wife has got a date, thus By 12:00.
Chances of me doing much till monday are ZERO.
So you want a job, pay is s**t, hours are bad, it can get hot in the kitchen when there is a fire and you lose all your stuff.
You need to understand Roms, read cab files, use your brain and most of all admit to the fact that you don't know everything and thus ask.
I am looking for Pastry Chef as well. One that can write applications.
Is there any way of setting folder permissions on the server for read/write only and not alter/delete?
Click to expand...
Click to collapse
Given that at the moment we are all the user XDA, I would say no.
What we need is a "BA_Admin" that revokes the rights of XDA to Read only, then we just get into the next problem, the person that posted (XDA) can't update it, so he needs to be BA_Admin...
The FTP site is a public place and like Toilets some people just can't pee in the Pot like the rest of us and sonebody has to clean up the mess.
Is there a neater way of structuring the ftp server directories?
Click to expand...
Click to collapse
Got some ideas, then share them with us.

Will have a look at dir structure but seems reasonable to me at the moment (Though Extended is the correct spelling ). Will use my WinCE CAB Manager to see what if anything is different on rom's you haven't had chance to view yet and generally assist where I can.
I will have a look at the orange rom as well, time permitting.
Would it be better to extract the .nbf files to sub dirs under the Extended_ROMS dir and have similar structure for radio and CE ROM?
ie ->
BlueAngel/Extended_Roms/Imate_PDA2k_WWE_12200_162_10600_SHIP/ms_.nbf
(With cabs extracted as well under a cabs sub dir?)
BlueAngel/CE_Roms/Imate_PDA2k_WWE_12200_162_10600_SHIP/nk.nbf
BlueAngel/Radio_Roms/Imate_PDA2k_WWE_12200_162_10600_SHIP/radio_.nbf
Or leave as is and use the kitchen with a CAB's dir under it with all known versions of cab files so we can select the most appropriate ones?

I've posted the document on the Orange 1.12.139 ROM into the Kitchen. It's fairly large since there is so much in the Orange ROM.
Here's a link:
ftp://xda:[email protected]_1_22/Docs/Orange_WWE_1.12.139_ExtROM.doc

Unfortunately nothing really new though (Wish I had known you were doing this rom - just wasted 2 hours!).
I haven't looked at the WModem.exe update yet - any ideas what this is for?
Who keeps moving files in the BlueAngel section of the FTP server? Makes life difficult having to keep searching each time. Please let us all know what you are trying to achieve as it keeps breaking links on other web pages!

Running it comes up with this text:
The utility will simulate this device as a wireless modem, and let your PC/Notebook be connected to network wirelessly.
Before you press the 'Start' button, please make sure you have connected the device to your PC/Notebook by serial or IrDA connection and disabled the Activesync.
When the wireless modem is activated you will not be able to receive any voice calls.
Click to expand...
Click to collapse
It then gives options for Serial, IrDA, USB and Bluetooth. Start, Stop and View Log buttons. Plus connection status LEDs - Connection, Send Data and Receive Data.
I've never tried it. I tend to use something more direct for dialup from my laptop.

OK guys!!!
I don't know what your naming system is but I've uploaded the O2 UK EXT ROM and I've called it "O2_UK_XDAIIs_Ext_ROM_112178_WWE.zip". This one is the original from my device.
Regards,
Dom

Ext_ROM password??
MDAIIIUser said:
ok done
cleaned up the Exteneded_Roms
Will post in the morning.
We need to take these apart and find what version they are then rename them.
ftp://xda:[email protected]/BlueAngel/Exteneded_Roms/IIs Asia WWE Ext ROM.zip
ftp://xda:[email protected]/BlueAngel/Exteneded_Roms/Seimens_SX66_Ext_ROM_ENG.zip
ftp://xda:[email protected]_MDAIII_Extended_Rom_Inc_DeviceInfo.zip
Click to expand...
Click to collapse
Any known pw's for those .nbf files? I tried Rom editor but couldn't recognize the pw's

Re: Ext_ROM password??
Cyber-mate said:
Any known pw's for those .nbf files? I tried Rom editor but couldn't recognize the pw's
Click to expand...
Click to collapse
They aren't .nbf files???????? They are zipped up (rar'd up) cab files extracted from the extended roms.
+*+*+*+ FOR INFO +*+*+*+
The xda3nbftool has an extra command line option of -t which attempts to discover the xor key used to encrypt the .nbf files. This seems to work well for all files except the radio_.nbf file which causes it problems. Try it on roms that you are having problems with to see if it is the correct key. You can check the resulting .nba file with a hex editor to ensure the PH20B and other data is shown at the beginning of the .nba file.
+*+*+*+*+*+*+*+*+*+*+*+
I have pulled the above ext roms apart and the version numbers are as follows:
IIs Asia WWE Ext ROM.zip = Version "1.12.925 WWE"
Seimens_SX66_Ext_ROM_ENG.zip = Version "1.20.115 WWE"
T-Mobile_MDAIII_Extended_Rom_Inc_DeviceInfo.zip = Version "1.06.117 WWE"
Files renamed appropriately so any links will now be broken (plus the fact that some kindly person has renamed the Extended ROM directory to its correct spelling!)

Gain extra space in ROM for cooking.....

Today I just tried this, I compressed my softwares which I have cooked in my ROM using UPX4PPC and cooked them in the ROM. As I have a small 32MB ROM, if this is possible to do with the default OS dll & exe files, it would be very useful. As I noticed, there is no big difference in the loading time of compressed files & the original. I searched the forum, but found nothing on compression of system OS files. Is there anyone who have done this before? Is this ok to do with .net CF dll & other large dll & exe files in ROM...?

making a smaller rom dont give more storage you know?
so compressing it will just give you more empty rom space nobody an use

Yeah..and most of the time the ROM won evenstart..blv me i tried to UPX the whole DUMP folder but the rom didnt even start

Rudegar said:
making a smaller rom dont give more storage you know?
so compressing it will just give you more empty rom space nobody an use
Click to expand...
Click to collapse
Actually I meant, If you can compress the originam OS files in ROM, there would be more free space in rom. We can use that free space to add more OEM packages.... Sorry if my english is not clear.

ather90 said:
Yeah..and most of the time the ROM won evenstart..blv me i tried to UPX the whole DUMP folder but the rom didnt even start
Click to expand...
Click to collapse
Try to use UPX only in exe files. More safe to be use in EXEs that are loaded after the booting & intended only in doing the settings (backlight.exe, MicAGC, Device info, CSD line type, CommManager, faxView.......) and on OEM exe files. Try not to use on dll files on first shot. But because already these files are very small, you will gain only a very small space. It works. If we can do the same on large dll files, it would be cool.....

shiranmotha said:
Actually I meant, If you can compress the originam OS files in ROM, there would be more free space in rom. We can use that free space to add more OEM packages.... Sorry if my english is not clear.
Click to expand...
Click to collapse
You are right. Thats how I had been able to pack so much extra stuff (many dont like that) in the ROM since a long time. But you have to be very carefully choosy about the files you have to UPX.
And, of course this method is for cooks only...

c_shekhar said:
But you have to be very carefully choosy about the files you have to UPX
Click to expand...
Click to collapse
What files can we compress. What I found ws, when I compress certain dll files, some items in menus related to them are blank. But when clicked they still work. Compressing Today dll files work, but if they have option configuration, they show some nunsence text. DLLs related to the .NET CF are the largest files i find in the ROM, can we compress them?

shiranmotha said:
What files can we compress. What I found ws, when I compress certain dll files, some items in menus related to them are blank. But when clicked they still work. Compressing Today dll files work, but if they have option configuration, they show some nunsence text. DLLs related to the .NET CF are the largest files i find in the ROM, can we compress them?
Click to expand...
Click to collapse
use the option for not compresing the resources

Shift rom kitchen + liberated rom

Hi,
let's keep the rom development topic in here. Here is my romkitchen, from kaiserkitchen 0.3. There is no flash utility, but you can use customruu for that.
The included rom is a base for localisation, or customisation. Click on first step (prepare), make your changes, then click on step 2 (cook). You have a Signed_RUU ready for flashing.
In my experience, it is best to delete the RUU_Signed before creating a new one
Also, the custom ruu will not flash the new rom if you do not change the folder between each flashing on vista. I use a name identation (folder1 then folder2, etc...)
Happy cooking. Please use this to help finding stuff about drivers
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html

thank you.
thaihugo said:
Hi,
let's keep the rom development topic in here. Here is my romkitchen, from kaiserkitchen 0.3. There is no flash utility, but you can use customruu for that.
The included rom is a base for localisation, or customisation. Click on first step (prepare), make your changes, then click on step 2 (cook). You have a Signed_RUU ready for flashing.
In my experience, it is best to delete the RUU_Signed before creating a new one
Also, the custom ruu will not flash the new rom if you do not change the folder between each flashing on vista. I use a name identation (folder1 then folder2, etc...)
Happy cooking. Please use this to help finding stuff about drivers
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
Hi
Thank you very much.
Ram

Thank you for your hard work and dedication we put it. Best regards

thaihugo said:
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
you mean that we have to extract sys folder from RUU_Signed.nbh file... then execute greloc and take note of the value... then copy files in the sys folder like OEMAPPS and OEMDrivers... and when we finish adding files in the sys folder... before we execute cook process and NBHutils we have to run the greloc again and reinsert the previous values... then click doit! in the greloc?

davidgreen said:
you mean that we have to extract sys folder from RUU_Signed.nbh file... then execute greloc and take note of the value... then copy files in the sys folder like OEMAPPS and OEMDrivers... and when we finish adding files in the sys folder... before we execute cook process and NBHutils we have to run the greloc again and reinsert the previous values... then click doit! in the greloc?
Click to expand...
Click to collapse
Make sure you keep your langugage specific folders intact.
Thanks
Ram

G'Reloc Situation
thaihugo said:
Hi,
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
Hi thaihugo
My G'Reloc posts the same numbers always before and after, and strangely they are same for kaiser and SnapVUE. Am I doing anything wrong there?
Slot 0: 01F90000
Slot 1: 03DD0000
Size of ROM: 83400000
Unknown: 00000000
These are the numbers I have seen in ImageInfo.txt under .VM folder in SYS
Thanks
Ram

Most of the time, greloc sees the same numbers, but is needed for the few DLL's you have added. So even if you (as me) get the same number everytime, just run it to make sure everything is in place.
If you put say a full sys from another device, you will get slightly different numbers. You will have to put back the value you posted here in that case.
Morality: If you add any dll folder or exe folder in the SYS folder (not a simple dll or exe), do a preventive g'reloc before cooking.

thaihugo said:
Most of the time, greloc sees the same numbers, but is needed for the few DLL's you have added. So even if you (as me) get the same number everytime, just run it to make sure everything is in place.
If you put say a full sys from another device, you will get slightly different numbers. You will have to put back the value you posted here in that case.
Morality: If you add any dll folder or exe folder in the SYS folder (not a simple dll or exe), do a preventive g'reloc before cooking.
Click to expand...
Click to collapse
oh. Thank you
Ram

Help needed...
After all...i decided to cook my own rom...
Read alot , did everything i have read...
"cab oem" ing
"initflashfiles.dat" modification
but when it came to the end , buildos gives an error such as
The target file "temp\dump\mstscax.dll is a directory not a file"
Mind do wake me up for what i am missing ?
Safak

Help #2 for the noob
I have found out the problem about the previous tab... It was about wrong configuration of Remote Desktop...
I have overcome it but came a new one which is
Buildos gives this error
"Error building default.hv and user.hv"
and now , what ?
Help this poor lamer :-(

eh...
I ignored the latest error and have my own rom...and i m now flashing it to my Shift...
Will let yo know whn done...to be honest i m a little nervous about the result...

Urgent Help
I m in deep trouble...
I messed everything and now i m dead...Winmo side does not even boot...tell me what to do...tell me if there is a way to go back ?!?

how about flashing working rom to it?

omg
Recovered....thanks alot for your patience...

Average Joe
Hi guys,
I recently bought a HTC shift which SnapVue came out to be in Chinese, i really need to change the language and liberate it ASAP. I 've read so many replies on many different threads that i'm just completely confused right now. I barely understand all the technical words used out here. I need help please. Thank you.

What is the max size the rom can be?
I'm getting my Shift this week and I'm prepering for it with a cooked rom
EDIT: I saw that UDK's rom was 64mb in size so I know I'm safe if I'm within that limit

gullum said:
What is the max size the rom can be?
I'm getting my Shift this week and I'm prepering for it with a cooked rom
EDIT: I saw that UDK's rom was 64mb in size so I know I'm safe if I'm within that limit
Click to expand...
Click to collapse
Welcome Gullum.
64mb is the limit IMHO. Some NBH files over 50 mb have problems, and I have to reduce them.

thaihugo said:
Welcome Gullum.
64mb is the limit IMHO. Some NBH files over 50 mb have problems, and I have to reduce them.
Click to expand...
Click to collapse
ok first problem now ... I made my first atempt to flash a rom and now snap vue only gives a black screen what to do now?
edit maybe it should be added to first post that to recover from bad cooked flash then just flast the included rom

I now have a working own cooked rom on my shift just need to do some finetuning and I'll upload a rom for everyone to try... next step is to port a newer build.
i'm typing this on my snapvue side of my **** with opera mini
I have added some apps from blakstone and opal
google maps, rsshub, streaming media, calculator skined, thumbcal and some more

gullum said:
I now have a working own cooked rom on my shift just need to do some finetuning and I'll upload a rom for everyone to try... next step is to port a newer build.
i'm typing this on my snapvue side of my **** with opera mini
I have added some apps from blakstone and opal
google maps, rsshub, streaming media, calculator skined, thumbcal and some more
Click to expand...
Click to collapse
Hi
Can't wait. Could you check whether you are able to attach to audio to notes etc.
Thanks
Ram

[REF][TUT] UPX Squeezer BATCH --> Improve program launch times

Going through some posts in the blackstone forum I discovered an interesting thread by Sir.B...
He talked about an old trick used for older devices to fit WM6 onto them with the side effect that load times of applications is much faster and tried this on his Blackstone.
I just gave it a try and it's impressive. So far I only tried it on HTC Album and Navigon Mobile Navigator 7:
HTC Album now loads in about 1 sec (previously about 4-5 sec)
Navigon MN 7 loads in about 2 sec (previously about 6-9 sec)
Seems to work flawless on any WM Device ;-)
I'm loving it!!!
Many thanks to Sir.B and everyone else at XDA-DEV!
I attached version 1.1 (which worked fine for me); 1.0 can be found on the original post.
Here's the quote and the link to the original post...
Sir.B said:
this is an old trick that was/is used for older devices to fit WinMo 6 on them
but a side effect is faster application load times
i figured i'd try it on the Blackstone and difference is noticeable
HTCAlbum loads in about 1 Second, before it took about 4
so i'm sharing this with anyone who is interested
The batch file is kept as simple as possible for everyone's ease of use
but this is pretty advanced tweaking, so all common warnings apply
and/or
if you are not comfortable with getting files from/to your PocketPC
and/or
can't figure out how to extract this zip and read the "read me.txt"
and/or
don't know what “any key” is DO NOT TRY THIS!
(read the forum and the wiki a bit more, and you'll gain the knowledge)
Version History:
v 1.0 - initial release
v 1.1 - no icon compression switch added to the batch, for more general compatability
to get you started
a short list of EXEs that i have UPXed and work well for me
AdobeReaderLE.exe
ASyncKiller.exe
BCR.exe
Camera.exe
FMRadio.exe
GoogleMaps.exe
HTCAlbum.exe
iContact.exe
KeePassPPC.exe
kinoma.exe
Labyrinth.exe
LongPressEndKeyApp.exe
MP3Trimmer.exe
MusicID.exe
Opera9.exe
OperaL.exe
QuickGPS.exe
RSSHub.exe
s2p.exe
s2u2 Settings.exe
s2v.exe
StreamingPlayer.exe
TomTom Navigator.exe
USBtoPC.exe
WMRegOptimizer.exe
YotaCenter.exe
YotaCenterUpdater.exe
YouTube.exe
and here is a list of things NOT to compress
manila.exe
cprog.exe
thumbCal.exe
calculator.exe
wt5jetpr.exe
any DLL
Please share your findings so that others can benefit from it
(SEARCH this thread for your application name or EXE filename)
note: you'll have to repeat this proses after upgrading your applications
thanks to;
edhaas - for the original simple to use batch file More info in this THREAD
UPX Team - a lot of technical info on the Website
kwbr - for a great ROM
and especially XDA-DEVELOPERS as a whole
Click to expand...
Click to collapse
LINK

amazing!! It works! Thanks very much.
I tryed successful SecondToday.exe , iDialer.exe , Destinator.exe

this looks quite interesting..will try it with all my programs after i backup the exe files

Giannis86 said:
this looks quite interesting..will try it with all my programs after i backup the exe files
Click to expand...
Click to collapse
It backs up the exes automatically. I did it on my device, Didn't notice any difference. Then again, it might be because my rom is already fast

List of EXEs that WORK / DON'T WORK
sosimple said:
amazing!! It works! Thanks very much.
I tryed successful SecondToday.exe , iDialer.exe , Destinator.exe
Click to expand...
Click to collapse
I guess we should start a list with Applications that work / don't work.
EXEs that WORK
AdobeReaderLE.exe
ASyncKiller.exe
BCR.exe
Camera.exe
Destinator.exe
FMRadio.exe
GoogleMaps.exe
HTCAlbum.exe
iContact.exe
iDialer.exe
KeePassPPC.exe
kinoma.exe
Labyrinth.exe
LongPressEndKeyApp.exe
MobileNavigator.exe (Navigon MN7)
MP3Trimmer.exe
MusicID.exe
Opera9.exe
OperaL.exe
QuickGPS.exe
RSSHub.exe
s2p.exe
s2u2 Settings.exe
s2v.exe
SecondToday.exe
StreamingPlayer.exe
TomTom Navigator.exe
USBtoPC.exe
WMRegOptimizer.exe
YotaCenter.exe
YotaCenterUpdater.exe
YouTube.exe
and here is a list of things NOT to compress
manila.exe
cprog.exe
thumbCal.exe
calculator.exe
wt5jetpr.exe
any DLL
...to be continued

I compressed with the above methode 105 .exe files of the windows folder (of a htc diamond). I compressed every exe file that i found in windows. I deleted all that had 0 kb file size as probably those files does not compressed corectly or something is wrong. So the exe files that left, was 105 exe files. I puted all those to windows folder ,overwriting the originals . I saved 15 Mb or more of space, the phone was extremely fast ,but cant run manila. I try to find which of the files must changed to the originals to run manila. I am sure it must be 2 or 3 files , but how can i find which 2-3 of the 105 files must be changed?
If i make it , i will give the full list of files that can be changed to earn max space and max speed

I compressed 104 files of windows folder without problem!
So i found the file that caused problem and manila didn't start. It was _mpman.exe By changing all the 104 others , no problem until now. I giving all the list with the 104 files of window folder of a diamond running manila 2.0.3 if anyone else want to try. Here is the list :
catalog.exe
CommManagerLink.exe
LaunchMSItem.exe
MobileCalculator.exe
tdsserver.exe
WelcomeCenter.exe
AdvancedConfig.exe
__cusTSKTEMP.exe
_mp07.exe
_mp08.exe
AdvancedNetwork.exe
AlbumSearcher.exe
ArcMC.exe
arinvalid.exe
AudioBooster.exe
AudioManager_Eng.exe
AutoAttribute.exe
AutoFormatMoviNAND.exe
AutoRun.exe
AutoShortcut.exe
Biotouch.exe
btdwake.exe
BTFtpClient.exe
btlauncher.exe
btrenamedir.exe
CheckAutoRun.exe
ClearStorage.exe
CommManager.exe
ConfigureDevice.exe
ConnectionSetup.exe
ConnectionSetupAuto.exe
DataDisconnect.exe
DeviceInfo.exe
EndKey.exe
EngInfo.exe
eT9MyWords.exe
FaxView.exe
felvop.exe
FieldTest.exe
FMRadio.exe
GAlarmWakeup.exe
HACSetting.exe
HTCMessage.exe
HTCStartUp.exe
HTCUSBToPCPopUp.exe
IA_Zip.exe
JBlend_AMS.exe
JBlend_VM.exe
KeyLock.exe
Labyrinth.exe
LongPressEndKeyApp.exe
ManilaActivateToday.exe
ManualFormatMoviNAND.exe
MicrophoneAGC.exe
MP3Trimmer.exe
NewMailAccount.exe
OneNoteMobile.exe
PhoneAgent.exe
PlayShow.exe
Powerexe.exe
PowerOffWarning.exe
ppt.exe
pword.exe
pxl.exe
QuickGPS.exe
Recorder.exe
Redial.exe
RegistryCSPTool.exe
remote.exe
RUpdate.exe
saplaywm.exe
SAPSettings.exe
sdpready.exe
SignatureReplace.exe
SIM_MGR.exe
SIMLock.exe
SIPGT_app.exe
startkey2.exe
StartUPBioTouch.exe
STK_UIPPC.exe
StopEvtSnd.exe
StorageLow.exe
StreamingPlayer.exe
TaskManagerApp.exe
TaskManagerLite.exe
TFSettings.exe
TmAppLauncher.exe
Transport.exe
USBtoPC.exe
VCDaemon.exe
VocabSetting.exe
VoiceCommander.exe
voicemail.exe
VTKey.exe
wcsan.exe
WLANSettings.exe
WLMImageUpdate.exe
WLMLauncher.exe
WLMMessenger.exe
WLMSetup.exe
WMADBG.exe
xT9Settings.exe
YouTube.exe
ZipView.exe

This works really well on my Verizon TP, but when I did it on all the .exe's in the Windows directory, it messed up the HTC volume control program. I'm not sure which .exe it was but afterwards, when I hit the volume up/down hard keys, only the Windows volume pop-up would come up. I've had to do a hard reset to get it back.
I agree that a list of .exe's that it works well on would be really helpful.
My 2 cents

Hi, I think it's a bit useless to do all exe files: If you compress a 16 Kb exe file to 12 Kb the loading time will not make a huge difference. Also, after two or three reads from the storage memory the program should actually be cached in memory assuming that you have made the cache performance tweaks. Furthermore this seems only sensible for exes that you use often; why would you want to do "ClearStorage.exe" which basically does the hard-reset from the control panel?
The big performance gain and space safe comes from large exe files that are cut to about 1/3 in size. Here it does make a huge difference. I am currently trying and running:
Opera9.exe and OperaL.exe << Edited after comments of PierreDiamond which is very right to leave the Pre alone.
Googlemaps.exe
HTCAlbum.exe
Camera.exe
HTC_GPStool.exe
TomTomNavigator.exe
ScummVM*.exe
The biggest effects were seen with Opera (6MB), Tomtom (7MB) and ScummVM (4.5 MB)(!!! : -) ). For Camera.exe and HTC_Album.exe I am not 100% confident that I am going to keep these. The speed gain is very little, and it does seem to affect the Manilla stability a little bit when more stuff is running. However I am not sure whether this is fully related to compressing the programs. So for now I am still trying.
Another thing I noticed is that it does not like exe programs which are still linking to outside files / sources such as 3.5 Net. An example of this is the Lightsaber program (Saber.exe).

I tried with some prog (MP3Trimmer, Powerpoint, Opera, Acrobat Reader)
Works great! But NOT for Opera! Because there's a OperaPre which launch Opera after SoftReset while Boot... and it seems to be, that the driver for decompress needs much time to load and needs additional RAM when its needed while boot. I had a CPU consumption around 6 % more.
Also - never pack something which is started automatically after soft reset. The other programms like Acrobat Reader or Powerpoint - everthing's fine and are really a little bit faster to start and less need in main storage.
Thanks for this Tweak
Pierre

dlee83 said:
This works really well on my Verizon TP, but when I did it on all the .exe's in the Windows directory, it messed up the HTC volume control program. I'm not sure which .exe it was but afterwards, when I hit the volume up/down hard keys, only the Windows volume pop-up would come up. I've had to do a hard reset to get it back.
Click to expand...
Click to collapse
Why did you do a hard reset? Squeezer makes a backup of the original file in the folder "2_Backup". Therefore you could just copy those back to the device.

maybe I better ask this question here:
i tried this method and copied the file in to the windows folter with total commander - over active-sync I could not overwrite the files. But now even less space is available..
aand.. when i copied all the files it asked me only about 5 times if i wanted to overwrite this file... so my explanation is that these are files which are stored in the rom.. so they got not overwritten but only doubled...
is this possible? and what can I do about it?
=> the problem is of course the data-memory and not the programm-memory
=> it really seems that the files are doubled...

the part of compressing exe at the PC gone well but i can't copy/paste the compressed exe back at touch pro , original files place is windows...i think this folder is a ROM folder...help.....please...

chaelli said:
maybe I better ask this question here:
i tried this method and copied the file in to the windows folter with total commander - over active-sync I could not overwrite the files. But now even less space is available..
aand.. when i copied all the files it asked me only about 5 times if i wanted to overwrite this file... so my explanation is that these are files which are stored in the rom.. so they got not overwritten but only doubled...
is this possible? and what can I do about it?
=> the problem is of course the data-memory and not the programm-memory
=> it really seems that the files are doubled...
Click to expand...
Click to collapse
massoh said:
the part of compressing exe at the PC gone well but i can't copy/paste the compressed exe back at touch pro , original files place is windows...i think this folder is a ROM folder...help.....please...
Click to expand...
Click to collapse
It should work with Total Commander. The files should not be doubled, but overwritten. Therefore overall storage (data memory) should decrease.
If I'm not mistaken (please correct me If I am) ROM storage for extended ROM etc. and data memory (flash chip) / programm memory (RAM) is separated. (?)

you can copy the apps with activesync but if you wanna put them back into the windows folder then your going to need totalcommander

I did copy it with total commander.. and it only overwrote about 5 exe files.. the others where doubled (I tested it - I deleted one of the exe files... and when the list reloaded the file was there again - but there was no error)..
do I have to use special settings in total commander?

Any chance to improve the tool so it has a list of known-NOT-to-work-after-compression EXEs?
It would be more foolproof as it would skip the problematic files automatically.
Edit: actually I might do it myself, I know how I can code this.

That would be a great addition!
snark_be said:
Any chance to improve the tool so it has a list of known-NOT-to-work-after-compression EXEs?
It would be more foolproof as it would skip the problematic files automatically.
Edit: actually I might do it myself, I know how I can code this.
Click to expand...
Click to collapse

snark_be said:
Any chance to improve the tool so it has a list of known-NOT-to-work-after-compression EXEs?
It would be more foolproof as it would skip the problematic files automatically.
Edit: actually I might do it myself, I know how I can code this.
Click to expand...
Click to collapse
yes please, when you are done
share with everyone this great addition
it would be a great help for many people
but who is going to maintain that list across so many ROMs and versions?

chaelli said:
I did copy it with total commander.. and it only overwrote about 5 exe files.. the others where doubled (I tested it - I deleted one of the exe files... and when the list reloaded the file was there again - but there was no error)..
do I have to use special settings in total commander?
Click to expand...
Click to collapse
Same here. I've actually lost some space, after copying the compressed .exe files to Windows dir using Total Commander. The file sizes of new files are correct and smaller than before...
It seems like it keeps backup copies of the replaced files somewhere?

A method for more speed , more free memory on the phone.

Here http://forum.xda-developers.com/showthread.php?t=493628 is a method for compressing the .exe files of the phone. I successfully have compressed 104 .exe files of windows folder . By doing this, every program run faster (smaller loading times) and you save space because every program is smaller . I earn about 12 mb. Untill now everything seems to work ok. This is the list of the 104 .exe files of windows that i successfully have compressed. The phone has been extremely fast. If you want to try it , do it on your own risk..
catalog.exe
CommManagerLink.exe
LaunchMSItem.exe
MobileCalculator.exe
tdsserver.exe
WelcomeCenter.exe
AdvancedConfig.exe
__cusTSKTEMP.exe
_mp07.exe
_mp08.exe
AdvancedNetwork.exe
AlbumSearcher.exe
ArcMC.exe
arinvalid.exe
AudioBooster.exe
AudioManager_Eng.exe
AutoAttribute.exe
AutoFormatMoviNAND.exe
AutoRun.exe
AutoShortcut.exe
Biotouch.exe
btdwake.exe
BTFtpClient.exe
btlauncher.exe
btrenamedir.exe
CheckAutoRun.exe
ClearStorage.exe
CommManager.exe
ConfigureDevice.exe
ConnectionSetup.exe
ConnectionSetupAuto.exe
DataDisconnect.exe
DeviceInfo.exe
EndKey.exe
EngInfo.exe
eT9MyWords.exe
FaxView.exe
felvop.exe
FieldTest.exe
FMRadio.exe
GAlarmWakeup.exe
HACSetting.exe
HTCMessage.exe
HTCStartUp.exe
HTCUSBToPCPopUp.exe
IA_Zip.exe
JBlend_AMS.exe
JBlend_VM.exe
KeyLock.exe
Labyrinth.exe
LongPressEndKeyApp.exe
ManilaActivateToday.exe
ManualFormatMoviNAND.exe
MicrophoneAGC.exe
MP3Trimmer.exe
NewMailAccount.exe
OneNoteMobile.exe
PhoneAgent.exe
PlayShow.exe
Powerexe.exe
PowerOffWarning.exe
ppt.exe
pword.exe
pxl.exe
QuickGPS.exe
Recorder.exe
Redial.exe
RegistryCSPTool.exe
remote.exe
RUpdate.exe
saplaywm.exe
SAPSettings.exe
sdpready.exe
SignatureReplace.exe
SIM_MGR.exe
SIMLock.exe
SIPGT_app.exe
startkey2.exe
StartUPBioTouch.exe
STK_UIPPC.exe
StopEvtSnd.exe
StorageLow.exe
StreamingPlayer.exe
TaskManagerApp.exe
TaskManagerLite.exe
TFSettings.exe
TmAppLauncher.exe
Transport.exe
USBtoPC.exe
VCDaemon.exe
VocabSetting.exe
VoiceCommander.exe
voicemail.exe
VTKey.exe
wcsan.exe
WLANSettings.exe
WLMImageUpdate.exe
WLMLauncher.exe
WLMMessenger.exe
WLMSetup.exe
WMADBG.exe
xT9Settings.exe
YouTube.exe
ZipView.exe

Intersting concept, i assume the speed gain is from the extra memory?
Is there a downside to this? Do the compressed applications take longer to load when you wish to use them as the device would have to decompress the file before using it?

And what method have you used for compressing?

Interesting
Yea this does seem interesting.
I'm gonna watch this one.
i can't see how compressing the files could make the device faster though, 12 of storage is nothing, you would need system memoryto make the device run faster???
if the files where to be compressed and still be able to execute with out a decompressing of the files then hay thats cool, but im not sure if thats possible.

The phone IS faster when you press some things. My english isn't good enough to describe it but , many things are faster. It is not my imagination . For example camera is loading faster i think, and when i press start-settings-system , it opens almost immediately. First it needed some seconds. I believe that the loading times are smaller because files are smaller , and the reading time is not the best by the storage memory used by the phone. By making files smaller , loading times are better even though the files are compressed . I am not sure for the theory but the phone works better. Look and at the link i gave. I only posted here so you know about the link. Also you earn storage space without loosing anything!

i did the same some time ago. i also compressed dll-files. now the diamond IS FASTER.
i used "upx mobile". try it yourself.

beginners question
i tried this method and copied the file in to the windows folter with total commander - over active-sync I could not overwrite the files. But now even less space is available..
aand.. when i copied all the files it asked me only about 5 times if i wanted to overwrite this file... so my explanation is that these are files which are stored in the rom.. so they got not overwritten but only doubled...
is this possible? and what can I do about it?
=> the problem is of course the data-memory and not the programm-memory => it really seems that the files are doubled...

i tried to move the packed files back to the diamond, but its nearly impossible....
the file listing is slow, i cant move them back because the diamond doubled the files, it doesnt ask to overwrite...
i tried it with total commander
so now i copied all files to \windows\
and now i have only 1mb of space free.....................
something must have gone wrong...
can someone please post a guide how to copy the packed files back to the diamond
€dit: so now ive rebooeted the diamond, and its very fast and i have 3mb of storage free now, but its not enough... something is wrong

hi
today i tried this method, too. packing was no brob, but copying back compressed files into windows folder failed with nearly every file of 105 because of displayed write protect error message. only 2 or 3 files worked in the end.
also i compressed tomtom.exe. but after that loading time did not increase. was more the other way arround!
in the end i replaced all compressed files by originals again...

sm4rty said:
i tried to move the packed files back to the diamond, but its nearly impossible....
the file listing is slow, i cant move them back because the diamond doubled the files, it doesnt ask to overwrite...
i tried it with total commander
so now i copied all files to \windows\
and now i have only 1mb of space free.....................
something must have gone wrong...
can someone please post a guide how to copy the packed files back to the diamond
€dit: so now ive rebooeted the diamond, and its very fast and i have 3mb of storage free now, but its not enough... something is wrong
Click to expand...
Click to collapse
I imagine you only had 3mb of storage left because the files you were trying to overwrite were stored in ROM...which you cann't overwrite. Instead Windows stores your new compressed version in storage. Effectively you have two copies of each of those files on your device; 1 copy in ROM and 1 copy in storage. This technique for compressing exe's is probably only useful for new applications installed on your device (like Opera & TomTom) or if you were to cook a new ROM with the compressed exes.

Error
This sounds great! But i get this, when trying to compress: upx: 3_Compressed\MobileCalculator.exe: CantPackException: .NET files (win32/net) are not yet supported.
Any idea?
Edit: hmm.. i only get the error with these files for now: MobileCalculator.exe, tdsserver.exe, WelcomeCenter.exe, AdvancedConfig.exe...
Other .exe's compress just fine..