Quake and Quake 2 running on my Kaiser. - Tilt, TyTN II, MDA Vario III General

http://www.youtube.com/watch?v=slOf9d5YHOM
the framerate for quake 1 i think is very good, for quake II it is acceptable, but im sure would be better if we had some 3D drivers.
i got quake 1 and 2 here:
http://www.herz-power.de/pq.php

mikeeey said:
http://www.youtube.com/watch?v=slOf9d5YHOM
the framerate for quake 1 i think is very good, for quake II it is acceptable, but im sure would be better if we had some 3D drivers.
i got quake 1 and 2 here:
http://www.herz-power.de/pq.php
Click to expand...
Click to collapse
Not bad - I will have to pull out my old quake games and grab the id files.

Bratag said:
Not bad - I will have to pull out my old quake games and grab the id files.
Click to expand...
Click to collapse
yea talk about climbing in the attic just for a game. remember though you can use the shareware files.

i love quake2

Aaaahh...
Impulse 9 gives me good memories

jym04 said:
Aaaahh...
Impulse 9 gives me good memories
Click to expand...
Click to collapse
yes hahahaha u got that right

Which version of the binary did you use, the Magician "AUX1" one, or the "AUX5" one? I'm having trouble trying to figure out which button is which, and how to back out of the video menu once I've selected landscape mode. (Probably half my problem is that I have conflicting bind commands in autoexec.cfg which override config.cfg. I'm still working on it.)
Can you please post the bind commands you use in your own config.cfg / autoexec.cfg? It looks from the video like you've got it set up pretty well.

tls said:
Which version of the binary did you use, the Magician "AUX1" one, or the "AUX5" one? I'm having trouble trying to figure out which button is which, and how to back out of the video menu once I've selected landscape mode. (Probably half my problem is that I have conflicting bind commands in autoexec.cfg which override config.cfg. I'm still working on it.)
Can you please post the bind commands you use in your own config.cfg / autoexec.cfg? It looks from the video like you've got it set up pretty well.
Click to expand...
Click to collapse
o yes i completely forgot about all that.
i used bind AUX 5. this makes it so the camera button is used as the esc menu. pressing the AF will bring up the menu and pressing the camera button fully goes back. here is my files for quake and quake 2. copy them to the ID folder.
. = fire
m = strafe right
n = strafe left
space = jump.
k = switch weapon (or press fn and then the number)
Start menu = console
Camera + AF = Menu and Menu back.
those are the main controls, you can figure out the rest from there.
hope it works.

Gotta get this in the next week. Too many good times with these 2 games. Very nice!

Hm.. i also installed these Quake Versions on my new TyTN II (i got it last friday )
But my framerate is lower than yours :-(
I didn´t installed much programs yet.. hm..
is there a code, to let me show the framerate during the gameplay?

nEuDy said:
Hm.. i also installed these Quake Versions on my new TyTN II (i got it last friday )
But my framerate is lower than yours :-(
I didn´t installed much programs yet.. hm..
is there a code, to let me show the framerate during the gameplay?
Click to expand...
Click to collapse
im not sure how to enable framerate. your framerate is slower for which one? quake or quake 2? if it's quake 2 then try these files.

nEuDy said:
Hm.. i also installed these Quake Versions on my new TyTN II (i got it last friday )
But my framerate is lower than yours :-(
I didn´t installed much programs yet.. hm..
is there a code, to let me show the framerate during the gameplay?
Click to expand...
Click to collapse
Open console and type "timedemo demo1". Wait for playing the demo to the end and then open the console again. Look at the last Line for your Frames Per Second.
btw. I have only 18 FPS at 240x180 on my Kaiser. My good old Himalaya is faster!

How do you get rid of the bottom bar and make it go into landscape mode?

Ok.. i got 19.0Fps ;-)
But i found out, why is was so slow at mine..
i used the touchscreen while playing..
it seems, that the TyTN II has a problem to draw things on screen, while pressing something on touchscreen..
I read some other posts, they also had this problem on other games (like emulators (snes i.e.))
I hope HTC will release a fix for this and the 3d / OpenGL Problem

drdingo21 said:
How do you get rid of the bottom bar and make it go into landscape mode?
Click to expand...
Click to collapse
i uploaded a cfg file after my first post, use that one, it automaticly starts in landscape mode. i gave a brief description of the main controls.

nEuDy said:
Ok.. i got 19.0Fps ;-)
But i found out, why is was so slow at mine..
i used the touchscreen while playing..
it seems, that the TyTN II has a problem to draw things on screen, while pressing something on touchscreen..
I read some other posts, they also had this problem on other games (like emulators (snes i.e.))
I hope HTC will release a fix for this and the 3d / OpenGL Problem
Click to expand...
Click to collapse
mine siad 14fps, but it seems faster than that...o well, numbers dont matter to me if it appears to be working fast.

Yeah, too bad touchscreen conflits with framerate.. even though it is nice to know now that I carry quake everywhere

quake
i cannot for the life of me seem to get this working can some one help me?
ive made a folderi n my documents called quake,
i copied the program file into it
then i copied PAK0.PAK into the same folder
and i get an error
W_Loadwadfile couldnt load GFX.wad
thought this might be inside the pak file
i all confused
help!! lol

fixed it !
doh helps to research i suppose
for any one else
u need to put the quake folder in ur main folder not my documents as i did
and u need to put a ID1 subfolder in there to

WHOA!!! ok, can somebody give me the begginers guide on how to get this on mine? i want quake 1 since the other is kinda slow. and can i run other pc games on this phone? i'm sure i can (duh) but which ones? i mean of the quake caliber... or better thanks in advance... ANY help is much appreciated.

Related

Doom on my kaiser!

and here it is!
http://www.youtube.com/watch?v=ig2NIxeMqRE
hope you recognize the music, It's the songs that were used in doom, which were made into midi versions in the game.
nice. the playback looks smooth. do you know what frame rate you are getting?
and, where can I get that!?
Excellent! Didn't know that existed, I've downloaded and been playing it myself for the last hour. Controls take a bit of getting used to, but otherwise its ace!
For those searching for this game, search for gfdoom to get the program then doom1.wad for the maps.
hey Mikey! would you like to release your configuration files or are you using the default ones?
this game is tha bomb. first game I played on my first PC. imho doom2 wad is the best. I just love double barrel shotgun.
thx again
bro
Download link???
Settings???
Any more info to help the rest of us re live this timeless classic???
Is there an option to make it into landscape mode?
GilesTheAlmighty said:
hey Mikey! would you like to release your configuration files or are you using the default ones?
Click to expand...
Click to collapse
Giles! its nice to see you on the forum!
First off, I'd like to thank danits for showing me how to configure doom with the keyboard.
ok so to make it landscape you must go into options and toggle the quality from low and high. this wont really change the quality, it rotates the screen.
as far as configuring keys, check out the other doom thread I made in the Development and Hacking section:
http://forum.xda-developers.com/showthread.php?t=369438&page=2
there is a program you can use, that when you press a key, it gives you a code. this code is required for assigning keys in doom. see my examples in the other thread.
and here's my skin file, with keyboard support.
the controls are the same as all my other config's if you've used them.
and keep in mine ive made the windows key the button to flip the screen.
That is soo cool... thanks for the video =)
mikeeey said:
Giles! its nice to see you on the forum!
Click to expand...
Click to collapse
nice to see you too!
i don't post much, searching is the answer to everything
anyway thanks for your config files! makes it a little easier to play! Used to have this on my old old nokia and now thanks to the Kaisers 9 way d-pad (so you can move diagonally eg forward AND turn) makes it so much playable
aweeeeesome
GilesTheAlmighty said:
nice to see you too!
i don't post much, searching is the answer to everything
anyway thanks for your config files! makes it a little easier to play! Used to have this on my old old nokia and now thanks to the Kaisers 9 way d-pad (so you can move diagonally eg forward AND turn) makes it so much playable
aweeeeesome
Click to expand...
Click to collapse
and not to mention use N and M to strafe makes it even easier.
well when i first joined i didnt plan on most much either...but...look at my post count now lol.
where did you get the game?
i am interested in adding this as well.
CLOCKWO12K said:
where did you get the game?
i am interested in adding this as well.
Click to expand...
Click to collapse
http://home.freeuk.com/gamefreaks/pql/gfDoom.htm
its really a shame the author never finished his last update. he came soo close, it was literally just a a couple days away, then he disappeared.
his updated WAS going to contain a much easier way to configure keys
proper keyboard support
MUSIC
improved peformance i think
he was also working on a zdoom port.
its too slow, but that would have been worked on too if he didnt disappear.
Where is the WAD
ANy one found where you can get a functional WAD file.
THe link to Jimmy software is either dead or just a front screen.
google.com
Ok after playing with it last night, it works, BUT
it does not work with gfDOOM Launcher.exe.
it gives me an "Doom Error"
You cannot -file with the shareware version.
register!
If I start from gfDOOM.exe it works but I can not get it to landscape mode
no matter what I do.
I dont know why is everyone makes this hard to get this game with all necessary files.
Careful. If you have posted a link to the full game its against the forum rules (it is warez).
I'd remove it if I were you.
alt236 said:
Careful. If you have posted a link to the full game its against the forum rules (it is warez).
I'd remove it if I were you.
Click to expand...
Click to collapse
-----------------------------------------------------------

Help with a Tilt and Java

Hello i am thinking about buying a tilt and I was wondering if somebody here can test something for me PLEASE..
if you would help me out got http://games.asobrain.com/ and register it is free . then goto play xplorers non ranking game and see if it will load the java window so you can play it on the phone it is a online game i would like to play
I know this sound weird but if somebody could check it out for me ..
Thanks AL
you gonna base your decision to buy a tilt on whether it plays that game?
The frame setup sucks in PIE (displays the borders). Seems to work fine in Netfront however. Got all the way to a game, but didn't attempt to play. However, a game is not why I'd buy or not buy a Tilt. FWIW.
Heheh No just would like it too work if somebody could check it out
AL
Guilf said:
The frame setup sucks in PIE (displays the borders). Seems to work fine in Netfront however. Got all the way to a game, but didn't attempt to play. However, a game is not why I'd buy or not buy a Tilt. FWIW.
Click to expand...
Click to collapse
so the game loaded and you seen the screen where it sets up the game ?
guys i am still going to buy it just wanted to know if it worked with that or not i have been here reading for long time just now reg
AL
Thanks
forgot to tell you thanks for trying it for me
where can i buy netfront ?
Al
I'm using the free latest beta version (3.5). Remember - tons of browser work going on right now. Even if you had issues, someone would probablyfix it pretty quickly with one of the new browsers coming out (Skyfire, Opera 9.5, etc.).
I think I got to the game screen. Registered and got all the way in and everything looked good. Just jumped in to one of the top games (where it looks like a forum) - didn't even look at the game's name.
ok just 1 more ? so you when you clicked on play and enterd you name and pass a new window open up and you can see the names of the games they offer like xplorers,toulouse and so on
on the xplorers ones did you click on non ranking 1 and if you did a new window will open up and say loading and checking game version and java and connecting to server if it works you will be taken to a lobby where there are a bunch of names of poeple on right and there are some buttons around the screen 1 says create new game click that too set up game with bots and start a game
I know this seems like a lot but it is real easy once you get there ...
the screen where it says applet starting is the importand 1 i think if you get too the lobby where the names are on the right it should work
let me know i can call you if you want to walk you through it
AL
hey guilf not to bother you did you see my last post ?
AL
lol......stop bothering guilf, wait till you get ur phone then u can test it out
XtreMe_G said:
lol......stop bothering guilf, wait till you get ur phone then u can test it out
Click to expand...
Click to collapse
hahhaha just orderd it tonight
AL
NinJak101 said:
forgot to tell you thanks for trying it for me
where can i buy netfront ?
Al
Click to expand...
Click to collapse
Nowhere, you can only have a pretty restricted Technical Preview.
Menneisyys said:
Nowhere, you can only have a pretty restricted Technical Preview.
Click to expand...
Click to collapse
where you been hiding. what you working on these days

FPSEce configuration/pocket iso

hopefully this tutorial will help fpsece be more fun/playable for everyone.
UPDATE: FPSEce configuration-imo this is one of the best set ups for the wing, but see what you come up with. a little tricky but here goes.
1ST to do this i utilize htc home and battery status plugins. i have been playing this emu overclocked to 299 mhz for periods of up to 2hrs. i do not condone this behavior! and don't even suggest it! but, you get the best gameplay out of the emu.
2ND, make sure all running apps are closed except fpsece,with your device in regular portrait mode with htc home on your today screen, open the keyboard on your wing, go to your programs tab on htc home and press the portrait to landscape flip button. if you you do not have that one activated take a sec and swap it out with one of the other buttons it should be worth it. after this your screen will look funny cause your keyboard is out and your screen has flipped back to portrait orientation.perfect!
3RD, navigate to fpsece and open. go to options/misc/display/landscape left.
4Th, go back into options and choose the joypad/assign buttons. now turn the device so you are looking at the keyboard normally. these are my keymaps but feel free to do your own! PAGE UP-TRIANGLE PAGE DOWN-X ARROW LEFT-SQUQRE ARROW RIGHT-CIRCLE A-LEFT S-UP D-RIGHT Z-DOWN Q-L1 W-L2 O-R1 P-R2 START-SPACEBAR SELECT-TAB MENU- CENTER OF DIRECTIONAL PAD on the screen portion of the wing. finally hit ok!
5TH hit the start tab, then iso and finally navigate to your game WHICH SHOULD BE IN ISOS FOLDER ON YOUR STORAGE CARD. this way you can keep many games on your storage card!
pocket iso guide- http://pdai.org/michu/fpsece/ldrguide.html
this will get your game file sizes way down and your memory card less cramped as well as more games will be compatible with fpsece.
Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?
GiZZy said:
Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?
Click to expand...
Click to collapse
my settings are on usa...recompiler...arm v5...GDI...fast boot...but these may or may not be the best. i am still learning the ideal options myself. i think vga is supposed to be the best/fastest but it depends on the type of device. also i know on some games, gran turismo for example,that adjusting the frame skip number does help speed the game. example: if you are getting5 fps set to 1 on options this will bump it up closer to ten. if you have 12 fps bump up to 2 this may get you closer to 20 fps and so on.
I am trying to install FPSEce on my Herald.
Put your Bios (i.e scph1001.bin) in your FpseCE\BIOS directory
Click to expand...
Click to collapse
What bois ?
Niwla said:
I am trying to install FPSEce on my Herald.
What bois ?
Click to expand...
Click to collapse
you will have to locate yours...maybe it will be on google....ps1 bios??
been waiting for this post for a while
what version are u guys messing with
Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you
JesusLoves said:
Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you
Click to expand...
Click to collapse
Setup your controller settings. Bind a key to "menu." Then press that key during gameplay, tap options, then adjust the frames from there.
Ok, i have a HTC Heremes, but i thought i'd just ask here, instead of opening a new thread in Hermes section. I get stuck at FPSece screen, no matter how i set up the options, nothing happens. I loaded ps1 bios. And i'm trying to find a tutorial or guide, but can't find any, all of them are mostly about ripping. Any ideas?
try reading this http://forum.xda-developers.com/showthread.php?t=369855&page=8 . also try the link in my sig!
Yea i got a question or 2.
All the ps1 ios' are like 25mb +
How am i susposed to put them on the phone since the phone dont have that much memory, and i cant reach my memorycard through activsync,
also i have dialup *errgg* and downloading iso' that big is a little impossible for my internet connection, is there a site to find iso's 25mb and smaller?
OK, I downloaded the software to play the games but I don't know where to get the games from. People have said they would be around 25mb, but I can only find ones for 350mb+. Please help. I have a Touch Pro 2
Wow, way to raise a thread from the bottom of the sea there...and about a completely different device too boot. Anyways, the games are not going to be 25MB, if they are then they are either demos or homebrew stuff. Most PSX ISOs are AT LEAST 350MB, but can go as large as a CD, IE 680MB or so. You can try to compress these down using that tool in the first post, albeit you will have to search around for it since the original creators website is not around anymore.
Ok, I've spent forever and a day looking this stuff up....so I have everything I need. Now if someone could walk we through getting my isos's to show up in the isos file that would be great! Does anyone know what I'm talking about?
Did you actually download the ISO's? And if you did, you make an ISO folder on your storage card and then transfer the ISO to it.
forgive me if this post is in the wrong section - i'm new to this forum
i've got a problem with my htc p4350 (herald) when using fpsece
i can start fpsece, but when i try to load a .iso file, the screen turns black for about 10 seconds, and after that it just returns to the home screen
i cannot reach any options screen or etc.
i got the right bios copied and trued 3 different files to load
maybe these are just the wrong files?
(in that case, which files should i try, and where can i get these?)
thanx in advance
bram

Fpsece

Hey i know people have gotten fpsece (wm playstation emulator if you didnt know) to work on the diamond and other wm.1 phones and i was wondering if anyones actually gotten it to run on the fuze ive been trying for like a week to get it to work and cant seem to find any help anywhere so if anyone could help me out or knows it wont work please tell me.
just copy your roms directly in the fpsece folder, not in the iso folder. where the exe is situated. worked for me but i say that the games are not that playable
ive tried that it still doesnt work
Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.
TGCLEAR said:
Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.
Click to expand...
Click to collapse
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.
JM33 said:
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.
Click to expand...
Click to collapse
same here. Anyone know why the site is down? I was hoping 1.0 would hit today since it will allow faster fps for games. Rumor is 1.0 is finally finished but there will be a pay to use version too..
its been down for 2 days now... i dont know how much longer i can keep hitting the refresh button
bios...
alot of people have problems with fpsce be cause they dont select a bios. if you go to ppcwarez.org-game releases- find fpsce 9.6-a couple of post down a guy posted a zip with like 8 different bios. just extract those into the bios folder. run the emulator goto choose bios. i always select the spch1001. it was recomended to work with almost any game. people haveing problems with fps need to mess with the settings. and frameskipi always set it on 2. hope this helps people. i gotta TP and i run it all off my sd card.
ya ive got it to run halfway decent if its really slow try at least throwing the emulator on your phones memory and theirs not much way getting around using the storage card for the games i got it to run on average around 30fps but im playing ff7 and when the battle starts and ends it drops to like 7 its not that bad when i set the frame skip to at least 3 but everytime i hit a wrong button it screw up so i started using the keyboard in landscape but i dont know how to turn the sound off or change the frame skip if anyone knows how please tell me.
oh and the sites back up
landscape
well you gotta map the buttons, and also i set the menue button to enter on the fuze keyboard. once you get into the menue it brings up the on screen keyboard that fills the screen. from there you can go into options to change frameskip and disable the audio, also exit the emulator or continue back to the game. 1.0 will be out soon and ill buy that ****! theres a bluetooth controller mgp 100or something like that just google bluetooth gamepad and you should find it. its cool cuz it cradles your phone and the buttons are laid out like playstation. all games on the 1.0 have a significant boost in fps. caint wait!!
thanks i figured it out after i posted that but when i open the menu sometimes it rotates the screen when im pressing another button and wont let me rotate it back and ya i wish 1.0 was out but i think theyve been saying it was coming out for a long time so i wouldnt get too excited about it.
You guys are getting 30 fps because of your cpu clock speeds wich is 528mhz default, if no2chem developes a overclocking utility wich i think hes about to do in the coming months, htc raphaels and other msm72xx cpu devices will gain huge fps increase, depending on what OC tables he can come up with, and also if a working gpu plugin that supports openGL ES is ever release that will give a even greater fps incrase overall , so if this two are release the msm7xxx devices will most likely be the best phones for fpsece.
And btw im going to buy a touch pro soon so il be join you guys pretty soon.
Regards
Rafyvitto
i just installed fpse 0.09.5 and when i try to load a rom the program close by itself and of course dont load the game any help?
who has had, the download ... further disassemble themselves
lo ini configured for MiTAC Mio A701 (as an example)
Code:
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=spusoft.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=2
UseOtherMDEC=on
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=100
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=off
EnableHLE=on
EmuConsole=on
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
MemCard1=card1.mcd
MemCard2=card2.mcd
ArmCoreV5=on
ArmCoreMMX=on
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
ShowFPS=on
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_DownRight=1
Onscreen_Down=0
Onscreen_DownLeft=0
Onscreen_UpRight=0
Onscreen_Up=0
Onscreen_UpLeft=0
ForceVGA=off
ForceGDI=off
EnableLFB=off
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=240
Stretch_y=180
Start_y=10
SoundVolume=10
Guncon=0
SPU_IRQ=0
Main_Volume=4
Da_Volume=0
Xa_Volume=0
Isos_PATH=\Storage Card\FpseCE\ISOS
[JOY0KEY]
Up=38
Down=40
Left=37
Right=39
Start=197
Select=198
Triangle=114
Quadrangle=196
Circle=195
Cross=13
L1=0
L2=115
R1=118
R2=117
GunA=193
GunB=196
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[GPUSOFT]
UseDD=0
Fullscreen=0
AlwaysCenter=1
Scanlines=0
hiddenlines=0
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1n1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUWAVE]
DeviceID=0
SampleRate=11025
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=1
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufI
holy sh*t, is this 1.0???
URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
any tips for gettin this to work on Touch Pro, when I open the app it goes right to the "select iso" window, and when I click on an iso it crashes.
URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.
Agent Blair said:
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.
Click to expand...
Click to collapse
this is not feke and stolen FPSECE ... from 13.1.2009
I got it to work, but how do you exit? I assigned a button to menu but I still can't get out of it without soft reseting

Tony Hawk Pro 2 Hardware rendering (NEW HD YouTube Video.Love your Touch Pro Again)!)

THPS2 in Hardware Mode. Touch pro users, Tweak Finalized.
This is my touch pro picture.
New HD YOUTUBE VIDEO NEW LINK ADDED
ok i have great news and bad news. Ill start with the bad news. you will need to download the hardware version. its the same as the soft version just with some tweaks for acceleration . now i must say i have tony hawk running on a touch pro with high graphics and hardware rendering on. no lag whats so ever. i cant beleive it.
If you have the Hardware Version then go ahead with the following.
Need the right version PM me. I do not have or give Warez. Just direct
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
Note 2. To see the 3rd DLL in the Dlls Folder Follow these directions on you windows PC. Enter the DLL'S folder. Press F10. a Menu bar will appear at the top of file explorer. Click Tools Then Foler option. then click view. under Hidden files and folders select Show hidden files and folders. Now you should see the 3rd hidden DLL.
Remember only this version and my tweaks will have this game Blazing i promise. Better than you ever played it on your phone.
Note: use file expoler and click Menu, then Check SHOW ALL FILES
1.Install to Storage card
2.Now you will have to move these 3 DLL's to your windows Directory and edit your registry as follows
3.HKLM/System/D3Dm/Drivers/Localhook Change to d3dm_ati.dll
4.Now in your THPS2 folder replace TH2_OPT with Mines
5.In Your THPS2 folder delete libgles_cm.dll
If you have libgles_cm.dll on your Storage card main directory delete it
Now open your keybroad and start Tony Hawk, Set you quilty setting to High EnJoy.
Mapping is a breeze. just go to options in THPS2 and set your values
Develpers who made this possible are : NuShrike, At0mAng, sakajati,iRiKi, and of course Me The Family. Cheers
Im upset there are people stealing my work on other sites and not giving credit where credit is due.
will it be playable with hw keyboard in landscape mode ? btw can´t wait :_)
Can't wait to test it.. really like the game.. I hope it is playable on a TP.. Keep up the good work..
Finally its a complished
ok i have great news and bad news. Ill start with the bad news. you will need to download the hardware version. its the same as the soft version just with some tweaks for acceleration . now i must say i have tony hawk running on a touch pro with high graphics and hardware rendering on. no lag whats so ever. i cant beleive it.
Since this site does not allow warez you have to email me a request for location of proper file to get this to work. remember i dont have any warezs i just no where to get it. so you better contact me quick before it dis appears.lol
If you have the Hardware Version then go ahead with the following.
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
PM me and i will give you my email. i will be on for 2 hours so act fast.
Remember only this version and my tweaks will have this game Blazing i promise. Better than you ever played it on your phone.
1.Install to Storage card
2.Now you will have to move these 3 DLL's to your windows Directory and edit your registry as follows
3.HKLM/System/D3Dm/Drivers/Localhook Change to d3dm_ati.dll
4.Now in your THPS2 folder replace TH2_OPT with Mines
5.In Your THPS2 folder delete libgles_cm.dll
If you have libgles_cm.dll on your Storage card main directory delete it
Now open your keybroad and start Tony Hawk, Set you quilty setting to High EnJoy.
Mapping is a breeze. just go to options in THPS2 and set your values
New video is now posted
New video Link
WIll it make you love your pro again. lol.
Works on my Touch Pro........Thanks
Landscape still upside down
Guys, any ideas on how to flip my landscape? I started the game with the keyboard out and it still flips the screen upside down? Any ideas?
You say that you must use the hardware version but where can I download it from?
Thanks in advance,
M_Taylor40
M_Taylor40 said:
You say that you must use the hardware version but where can I download it from?
Thanks in advance,
M_Taylor40
Click to expand...
Click to collapse
PM me No Warez Allowed
wazzubrad said:
Guys, any ideas on how to flip my landscape? I started the game with the keyboard out and it still flips the screen upside down? Any ideas?
Click to expand...
Click to collapse
DId you follow my steps to the tee? What rom you Have? Might be some tweaks or changes you already made thats not allowing it to work.
I did. And reviewed it three times to make sure.
dearmasfamily said:
If you have the Hardware Version then go ahead with the following.
Note: Remember Hardware and Soft version look exactly the same so theres really no way to tell the diffrence except in the size of the install. Hardware is Bigger.
Click to expand...
Click to collapse
OK nevermind i have the hardware version. i know this cause when i try to start the game it says that my device is not a 3D device install the software version. why would that be though?
dearmasfamily said:
DId you follow my steps to the tee? What rom you Have? Might be some tweaks or changes you already made thats not allowing it to work.
Click to expand...
Click to collapse
When you extracted the files did you make sure you unhide the 3rd DLL?
m1ke420 said:
When you extracted the files did you make sure you unhide the 3rd DLL?
Click to expand...
Click to collapse
Thanks for pointing that out. I've tryed. but nothing seems to work i even commad lined it.
So i added a work around to post one. as Note 2 thanks again.
Not working on my Fuze with RRE Series 6 WM 6.5 v8.6. I did everything but the registry hack since it was already there. Replaced all files blah,blah..
I get told that my device is not a 3D device install the software version. I know I have the hardware version.
Wil Badger said:
Not working on my Fuze with RRE Series 6 WM 6.5 v8.6. I did everything but the registry hack since it was already there. Replaced all files blah,blah..
I get told that my device is not a 3D device install the software version. I know I have the hardware version.
Click to expand...
Click to collapse
Like i said in my frist post theres a hardware version tweaked so ask me and i will lead the way. dont give up its a wounderful game when playable like mines
PM ME with your interest
Awesome stuff. I got it all up and running but the playing screen is like barely half of my screen when actually playing. The menus come up full screen but when actually playing it doesn't Any ideas?
Cheers
Oh bugger seems whatever I did, I stuffed up touch flo 3d eep.
Guess I have some work to do here haha.
Cheers
-wireless- said:
Awesome stuff. I got it all up and running but the playing screen is like barely half of my screen when actually playing. The menus come up full screen but when actually playing it doesn't Any ideas?
Cheers
Click to expand...
Click to collapse
Go to options and make sure the game is set to High Quility Not Low OR MED.

Categories

Resources