i searched and no luck, so here it goes,
After talking on the phone, when the screen shuts off, when i hit the red little phone icon to end the call, the screen goes bright again, but as soon as i hit the o.k. button the screen goes dim, i have to hit the stand-by button on the side and hit it again for the screen to go back to bright.. Anybody know how to fix this or is there a way so that the screen stays bright all the time?
Disable the screen shutdown during phone calls. I believe kaiser tweak has that option[its a sticky. Make sure u pay close attention to All tilt-specific questions too...]
Related
how do i hangup a call?
the screen is black and therefor inaccessible after a very short while so i cant use the
on-screen red end-call buttun, and also the button on the right-bottom (phone-icon down)
doesnt work!!! (or sporadically: cant put my fuinger on that yet....)
i tried the tweak where my screen will stay up while having a call, but that one doesnt seem
to work on my rom-version or so? (standard 1.35 dutch version).
is there another (or new) way to keep the screen up while on a call maybe?
please help: this is highly annoying as you probably understand.....
Thanks group!
The (hardware) button on the bottom right should work normally if you want to end a call. It could be that there is just a little leg between pressing it (once) and the phone actually responding to it.
If you want the screen to pop on during a call, just press the power button on top of the phone. Could have figured that out yourself... (even by searching the forum)
what a problem.... lol.. did you assign the hang up button to something else??
thx guys!
no, not assigned to something else.
the power-button is ok yes, thanks. still: the screens display should stay on, right?
thank you!
much appreciated
babedieboe said:
thx guys!
no, not assigned to something else.
the power-button is ok yes, thanks. still: the screens display should stay on, right?
thank you!
much appreciated
Click to expand...
Click to collapse
No the screen light will not stay on when your making a call. Simply put and its been repeated so many times on here now...that when you make a call the diamond light goes off as soon as the sensor senses that its near your ear...the sensor is next to the earpiece...clear little led light. What you can do to get around it...which is what i do is ring the number you want to ring and dont put it next to your ear until you get the vibrate ie when the call connects then put it next to your ear and the light should stay on...well it does on mine but if that dont work then when in a call just press the middle navigation button and that will turn the phone backlight on for you.
Spawn12 said:
No the screen light will not stay on when your making a call. Simply put and its been repeated so many times on here now...that when you make a call the diamond light goes off as soon as the sensor senses that its near your ear...the sensor is next to the earpiece...clear little led light. What you can do to get around it...which is what i do is ring the number you want to ring and dont put it next to your ear until you get the vibrate ie when the call connects then put it next to your ear and the light should stay on...well it does on mine but if that dont work then when in a call just press the middle navigation button and that will turn the phone backlight on for you.
Click to expand...
Click to collapse
Spawn, you're absolutely wrong about the sensor... the screen light goes off regardless of whether you hold the phone against your face or not.. it's a timer..
Older phones like the Touch Cruise didn't have the sensor but yet it turns the backlight off after a few secs...
It's a timer setting in the Registry.
It turns the backlight off to save battery.
happyguy82 said:
Spawn, you're absolutely wrong about the sensor... the screen light goes off regardless of whether you hold the phone against your face or not.. it's a timer..
Older phones like the Touch Cruise didn't have the sensor but yet it turns the backlight off after a few secs...
It's a timer setting in the Registry.
It turns the backlight off to save battery.
Click to expand...
Click to collapse
i thought spawn is right but i did a very simple experiment.
called my self from my fix phone and live the diamond on the table face up. i answered without picking the phone and after a few sec the light went off.
happyguy82-1, spawn and kukuriku-0
if there is a timer it has a registry and where there is a registry it has to be a "tweak".
btw, another way to have the light back and a safe background for yr ear is simply pull out the pen. you''ll get a note that will not bother anyone because it is not actionable by yr ear lol!
if you'll light on the screen with any other means you and your partner in the conversation will get for sure a few "beeps" when the phone pad is touched by yr ear.
happyguy82 said:
Spawn, you're absolutely wrong about the sensor... the screen light goes off regardless of whether you hold the phone against your face or not.. it's a timer..
Older phones like the Touch Cruise didn't have the sensor but yet it turns the backlight off after a few secs...
It's a timer setting in the Registry.
It turns the backlight off to save battery.
Click to expand...
Click to collapse
Ermm no it doesnt...i just made a call to test your theory....didnt put the phone to my ear and when i did the light still stayed on. Left the diamond still connected for about a min or so and still the light stayed on...
On my phone i have the TLR version 1 rom running and made a few adjustments in the power settings so dont know if thats made any difference to the light staying on etc.
Spawn12 said:
Ermm no it doesnt...i just made a call to test your theory....didnt put the phone to my ear and when i did the light still stayed on. Left the diamond still connected for about a min or so and still the light stayed on...
On my phone i have the TLR version 1 rom running and made a few adjustments in the power settings so dont know if thats made any difference to the light staying on etc.
Click to expand...
Click to collapse
you are right ...i think i didn't pickup the phone but i was too close, looking at the screen....and that was enough to start the sensor.
checked again keeping asafe distance from the phone and the screen doesn't turn off...
I know that many of you have disabled the "Fast Sleep" mode while making a phone call. Well what I'm wanting to do is just the opposite, disable (or lock) the touch screen entirely while making a call. The problem I'm having is that when talking on the phone I always end up touching the screen with my cheek and either accidentally end the call, call someone else, or whatever. I would like to have a utility which would lock the touchscreen maybe 5-10 seconds after a call is established. One of the hard keys or an i-pod type slider function would unlock the screen.
Does anyone know of a utility like this?
I do have the "fast sleep" mode enabled within Kaiser Tweeks. However, while the fast sleep mode turns off the screen to save battery power, it still wakes back up with just a touch.
I have an AT&T Tilt.
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
NZuercher said:
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
Click to expand...
Click to collapse
It is a lock not a today replacement. That is what I use.
Thanks parleyp, I guess I'll give s2u2 a try. The info that I've seen just seems rather complicated when all I need is a simple lock utility. Why is there discussions on s2u2 affecting the weather tab, clock display, background, etc?
Which version are you using on your tilt?
Would you be interested in something like that??
If so search for opal dialer in kaiser Rom development subforum.
I am fairly certain that you can just press the "power" button and shut the screen off. When you are ready to hang up, just hit the end button. This is not automatic, but it works for me.
yea, i was gonna say: what's wrong with just pressing the power button?
I have my screen timeout set to 15 sec. That's just fine if you're not using your phone but there are moments when this timeout is not needed.
e.g. When I'm reading something on a site - screen times out in those 15 sec
when I'm writing a message and I stop to read it and then want to delete last part of the text, I hold down backspace and screen times out in the middle of erasing text - so it means it only picks up touch when I lift my finger off the screen.
I guess a quick fix would be to change screen timeout to those 30min, but then I'd always have to turn off my screen manually if not needed.
So I'm looking for a "smart" screen timeout solution if anyone knows any.
Thank you
Why not turn it up to one minute? It's easy enough to turn the screen off manually when you put it away, so you don't really end up wasting battery power. And it's almost always enough to keep the screen on when you pause to read something.
Even if you do forget to turn it off, it's not long enough to waste much battery power and it should be pretty safe, the capacitive screen shouldn't react to anything when it's in your pocket.
Why do you set it so low? So you can avoid turning it off manually? For me it's a habit to hit the power button as soon as I'm not focused on my phone, but I can understand if some people don't like it that way.
That is weird that it times out while you're holding a button. I would have expected that to keep the screen awake.
I would expect that any app running in the foreground would disable screen timeouts, but.on the other side that would be killer if you forget to go to home screen - it would eat your battery.
I guess that 1min timeout is only solution for now.
TY for your reply.
Sent from my GT-I9000 using XDA App
It doesn't do this every time, but quite often and it seems to be random as I can't make it happen by doing one thing in particular. So, I used the phone for whatever, and then put it down, wait for the screen to go off and then in between the screen powering off and the always on display coming on, I get what you see in the photo below, and also in the bottom left corner in tiny writing, it says something about screen powering down and then something else that flashes on too quickly to read.
What do you reckon? Thanks.
Apologies for the screen protector, not got round to fitting the Whitestone dome yet.
I tend to get that whenever I open the keyboard for the first time after opening an app like WhatsApp or Snapchat. I don't get it when turning off.
I also get it when I press the middle button to go home from within an app.
But then again, I also have the taskbar to swipe up whenever I need it, so I'm not sure if this is relevant to me.
I.e I don't have the taskbar set to be static
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.