There came a screen protector with my Touch Dual, which works very well, i do not see any difference in using the protector or using the device without it. So anybody out there, who knows, where to get this specific protector?
Thanks in advance.
we
PS It is adhesive, which i like more than sticking it to the screen and never being able to remove it again
the one that came with mine is ok but I messed up by having some dust underneath so I've ordered a new one from here: http://www.martinfields.co.uk/dis_product.asp?model=HTC_DualTouch&modeln=Touch Dual&prod_type=screen
I've always used Martin Fields screen protectors, IMHO they're the best! plus they're ultra clear once you put them properly you can't tell
gfreek said:
the one that came with mine is ok but I messed up by having some dust underneath so I've ordered a new one from here: http://www.martinfields.co.uk/dis_product.asp?model=HTC_DualTouch&modeln=Touch Dual&prod_type=screen
I've always used Martin Fields screen protectors, IMHO they're the best! plus they're ultra clear once you put them properly you can't tell
Click to expand...
Click to collapse
In all my excitement when I got the Touch Dual more than two weeks ago I completely overlooked the screen protector in the box Found it but still not applied it yet
Brando already delivers touch dual protectors too.
Screnn Protector Washable?
Hi..
Do you know if original screnn protector is Whashable?
Thanks
The orig. protector rocks.
I bought some from ebay and already dropped them into garbage.
Now i ordered one from martinfields and i hope this one works better for me ...
Any other experience?
i got 3 really cheap ones off ebay which are fantastic.
they're in 3 sections, you take one side off to reveal the sticky side then put it on the screen then pull the other side off to reveal the front face of the cover.
really good.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200185607339
I bought this as spare:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=180200707096&ssPageName=STRK:MEWN:IT&ih=008
so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector
Tothotspur said:
so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector
Click to expand...
Click to collapse
I don't know whether it's the best or not, but I had the same problem that you do.
I bought the protector from martinfields based on the recommendations in this thread, and must say that I like it better than the original one.
It is thinner, so it seems like you need less pressure to make the screen react when you press it.
I've only had it for a day, so I really can't say how durable it is...
Royan
Royan said:
I don't know whether it's the best or not, but I had the same problem that you do.
I bought the protector from martinfields based on the recommendations in this thread, and must say that I like it better than the original one.
It is thinner, so it seems like you need less pressure to make the screen react when you press it.
I've only had it for a day, so I really can't say how durable it is...
Royan
Click to expand...
Click to collapse
ok thanks, i will probably buy one as well
i bought a cheap one on ebay yesterday. as soon as it gets here I'll try it out.
had the same dust problem with the original. there should be at least 2 protectors
Tothotspur said:
so is the martin fields one the best? i applied the original one wrong and there is dust underneath it and need a new screen protector
Click to expand...
Click to collapse
i love the invisible shield. they have screen protectors and full body covers. customer service is fantastic, too.
http://www.shieldzone.com/item_description/HTCTOUDUAS.html
http://www.shieldzone.com/item_description/HTCTOUDUAFB.html
watch their demo videos. it's made from strong stuff!
Are the Martin Fields and Invisible Shields self adhesive?
I don't have to glue them on do I hehe
The one that came with mine I put it on properly but then I panicked slightly and thought "How do I get it back off!" so peeled one side up just to see if it would come off, then of course got all dust and crap under the edge so it looks skanky now thus want a new one.
I only managed to do that because it was slightly misaligned and a bit overlapped at the side of the screen though not enough to notice unless you looked very closely. So how do you get them off if they are put on perfectly? I know you could use a knife but you could scratch the screen and that defeats the purpose
HTCStuey said:
Are the Martin Fields and Invisible Shields self adhesive?
Click to expand...
Click to collapse
Don't know about Martin Fields.
Go to link in above post to see Invisible Shield. If I remember correctly, they tell you how to do things on their site. I don't have one for the niki so can't tell you for sure, but have one on my ipod and it took awhile to get on, but well worth it.
Also, their customer support is very very good.
HTCStuey said:
...So how do you get them off if they are put on perfectly? I know you could use a knife but you could scratch the screen and that defeats the purpose
Click to expand...
Click to collapse
Use scotch tape. Just stick it on the face of the screen protector and lift. Simple as that.
Btw, I've recently swapped out my screen protector because I somehow got a scratch on it. Anyway, the sales recommended one that was matte finished (as oppose to glossy like most screen protectors). I have to say, it is so much better than the traditional glossy ones. The great part is the texture. It is so much smoother than regular ones. Great for sliding your finger across using Touchflo.
However, it does diminish your off-axis visual quality. But i suppose that doesn't really matter since you don't look at your screen off-axis much anyway. It may even be a plus since you might not want the person next to you to see what you're looking at...
ohyeahar said:
Use scotch tape. Just stick it on the face of the screen protector and lift. Simple as that.
Btw, I've recently swapped out my screen protector because I somehow got a scratch on it. Anyway, the sales recommended one that was matte finished (as oppose to glossy like most screen protectors). I have to say, it is so much better than the traditional glossy ones. The great part is the texture. It is so much smoother than regular ones. Great for sliding your finger across using Touchflo.
However, it does diminish your off-axis visual quality. But i suppose that doesn't really matter since you don't look at your screen off-axis much anyway. It may even be a plus since you might not want the person next to you to see what you're looking at...
Click to expand...
Click to collapse
That's a good idea! I never thought of that, I did see something on a website about using something sticky to remove it but I was thinking of blutak or something like that and thinking that it wouldn't work very well!
A bit of grit got on my screen and I scratched the protector with my stylus the other day, another reason to get a new one, but also a good reason for leaving the current one on!
Where do you get the matte ones from?
HTCStuey said:
Where do you get the matte ones from?
Click to expand...
Click to collapse
I'm in Hong Kong so I just picked it up from one of many independently owned techy shops. I didn't pay attention to what brand it was (i basically just paid the guy and he opened it up and stuck it on for me). The next time i head back there, i'll take note of the brand.
Invisible Shield
Just installed the I.S. (bought on ebay) on my Niki...
It's been a pain in the neck to install...
It's really hard to prevent small bubbles on the surfaces...
Maybe on a white ipod has a better look but on the Niki black finish you'll see them..they're really really small but sometimes in a large number: the overall effect is as a dirty and scratched Niki...
Bigger ones could rise passing from the front/back to the lateral sides, in particular near the big 4 rounds.
The hole for the hands-free speaker was totally missing!
When in hand you can feel the sharp edges corresponding to its thickness ...
The original protector is a little bit "softer"
But...
I can have it in my pocket with no additional thickness...
Right now I was using the silicon case, but it seemed that I was calling with a tv remote control...
I was just gonna buy an Invisible Shield *Thinks*
Thanks for the info ohyeahar I was thinking of going for the Invisible Shield but now might just go for a screen protector and some sort of leather case-age. Dunno
Related
Has anyone found somewhere with screen protectors for the Ameo (that will have stock before 15th April)?
My Ameo is getting delivered tomorrow, and I'm thinking that if I wait till 15th April, my screen will be scratched to bits by then. All the screen protector will get to do will be to neatly seal and preserve the scratches! ;-)
HI,
My T-mobile Ameo(The Netherlands) was delivered with a screenprotector
But the quality isn't as good as the UltraClears from Brando. But it's something. I will replace it when Brando has them for the Ameo.
dpbakker said:
HI,
My T-mobile Ameo(The Netherlands) was delivered with a screenprotector
But the quality isn't as good as the UltraClears from Brando. But it's something. I will replace it when Brando has them for the Ameo.
Click to expand...
Click to collapse
be careful of the original screen protector, when you remove it, it might leaves a mask on the screen !! one of my friend used the original screen protector, and when he removed it, the screen surface got "lift up", so the surface is no longer flat!!! he has to send back and get a exchange at the end.
I am also looking for screen protector, i have contact Martin Field, and they say they will release one soon when they get the screen measurement.
there is a better choise i beleve, which is full body shield
http://www.mobile-gadgets.net/mgc/home.php?page=invisibleShield
or
http://www.shieldzone.com/item_description/HTCX7500.html
lawbet7eb said:
there is a better choise i beleve, which is full body shield
http://www.mobile-gadgets.net/mgc/home.php?page=invisibleShield
or
http://www.shieldzone.com/item_description/HTCX7500.html
Click to expand...
Click to collapse
Now this I like the look of. Durability! But how is the quality of the actual Screen protector? Is it like Boxwaves Clearview or 99% Anti-reflection...bla bla bla?
This is important as I don't want to loose the sharpness of the display or much of the touch sensitivity of the screen.
@wu5262:
Thanks for the warning(and all your other comments in the Athena section. I read them (almost) all).
I will be very carefull when peeling the screen protector off. And will order another one as soon as possible.
@lawbet7eb:
Thanks for the tip; Did you trey those yourself already? I Like to know how good they are on the screen. And if they give the same clearness as the Brando UltraClears or Boxwaves screen protectors.
I just oredered one, so I will test it and share the results with you guys!
@ dpbakker: Ik verwacht de protectie as vrijdag binnen te hebben!
Thanks/Dank je wel
I will wait with ordering then
Hi,
I couldn't wait and already got this screen/device protection and applied it.
It works verry wel and is, in my opinion, better/clearer than the original screen protector. It feels thicker dan the original one but the touch screen works as well as before. I also applied the protection on the rest of the device. That works OK as well. But the disadvantage of protection is that it is flexibel in the way that you can stretch the 'plastic'. So be very carefull when applying it. The protection for arround the screen was the only one not working for me. Mine wasn't cut out OK and I streched it to much. :-( So I threw it away.
dpbakker said:
Hi,
I couldn't wait and already got this screen/device protection and applied it.
It works verry wel and is, in my opinion, better/clearer than the original screen protector. It feels thicker dan the original one but the touch screen works as well as before. I also applied the protection on the rest of the device. That works OK as well. But the disadvantage of protection is that it is flexibel in the way that you can stretch the 'plastic'. So be very carefull when applying it. The protection for arround the screen was the only one not working for me. Mine wasn't cut out OK and I streched it to much. :-( So I threw it away.
Click to expand...
Click to collapse
is it possible for you to post some picture of it? how does it feel? does it make your device feel like a huge plastic?
I will make some pictures tonight( need a second camera for that).
It feels a bit plastic, but I don't mind. The Ameo is in it's case most of the time. If you touch the screen with your stylus then it feels a bit sticky, but you can drag arround the screen with your stylus with no problem. It is however difficult to apply the protection withou any bubble, but maybe I'm just a bit clumsy with that.
As promissed, the pictures.
I've got it also as of todayand I'm also positive avout this invisible shield protector. Indeed be carefull with getting of the plastic from the paper. Also use a lot of water (delivered with the package) because then you can position the shield the best. An other tip: use a tissue to get rid of the water between the shield and the screen.
Works perfect.
+ very easy to install
+ good protection for all sites of the device
+ very clear en bright
- easy to cut the thinner parts in 2
- he plasic is reel soft like a kind of thin rubber, so if you drag over the screen using your stylus feels like you stuck in the plasic a bit. Maybe this will get a bit better after a couple of day's.
Conclusion: 8+ (out of 10) so buy it!
Martin Field screen protecter available
Martin Field has just release the screen protector for Athena, i have already place my order on it.
Martin Field is one of the best screen protector out there
wu5262 said:
Martin Field has just release the screen protector for Athena, i have already place my order on it.
Martin Field is one of the best screen protector out there
Click to expand...
Click to collapse
Thanks for the heads-up - I've ordered mine now.
(And I can second the recommendation - I've tried a few different screen protectors before, and the Martin Fields one I used on my Universal was by far the best.)
Maybe Brando UltraClear would be the best solution???
dalelane said:
Thanks for the heads-up - I've ordered mine now.
(And I can second the recommendation - I've tried a few different screen protectors before, and the Martin Fields one I used on my Universal was by far the best.)
Click to expand...
Click to collapse
Sounds good to me - have just ordered some Martin Fields protectors! Just can't wait for my Ameo now!
I bought a pack of Writeright things YEARS ago, and have been using the same pack ever since. However due to the size of the Ameo screen they come nowhere near filling it.
A shame, they are amazing.
The stock one that came with it is a bit sticky for my liking, and a tiny bit too narrow. I have over a 1mm gap at the right because I lined up at the left edge exactly.
Im not so good at fitting them, so a couple of bubbles. Has anyone lifted and replaced the stock protector? recommended methods? The old fingernail under the corner always ruins them.
Some people suggest a bit of sticky tape to lift the corner.
wu5262 said:
Martin Field is one of the best screen protector out there
Click to expand...
Click to collapse
I disagree. I have just fitted the Martin Field screen protector to my Ameo abd it didn't work well. I have had to take it off and now I have no screen protector temporarily.
Hi I was just wondering how many people are using their diamond with out a screen protector. I have been using the invisi shield but it's starting to peel and look pretty messy. I don't really want to have to carry it round in the htc pouch they give you.
So how many folks just stick it in their pocket and have they found the screen scratches easily?
Cheers
I'm currently using a special TPU case from CAPDASE, unlike all the other silicone cases on the market, I'd say this has to be the best quality non-leather case out there. It comes in two colors, black or silver/white. In real life it looks a lot better than in pictures. I'm also using their mat finish screen protector.
The picture is from Google.
Me
No screen protector and no worries
my original screen protector wore off and i'm going to get a new set ASAP. it's not very wise to be using the phone without one IMHO
sorry, double post
I'm not using any screen protector either (have had it for 7 months now) and so far no problems. There are a few very little scratches here and there but they are not noticeable and it doesn't bother me.
edit: just cleaned well the screen to double check and there is only one small scratch near the camera on the top right corner, but it's only visible under a certain angle and with the light reflecting on the screen. So, the Diamond's screen is ****ing resistant!
I'm using one from MArtin Field. They are highly recommended as I have purchased many of their protectors and they are very very high quality
i dont use protector and my screen is full of hairline scratches and it also has 3 reallly deep scratches
i dont care
vale|46 said:
I'm currently using a special TPU case from CAPDASE, unlike all the other silicone cases on the market, I'd say this has to be the best quality non-leather case out there. It comes in two colors, black or silver/white. In real life it looks a lot better than in pictures. I'm also using their mat finish screen protector.
The picture is from Google.
Click to expand...
Click to collapse
I can't find it on their website, would you be able to provide the product number or a link to where I can buy one?
Thanks
--------------------EDIT-----------------------
Found it, for whose who are interested.
Click here
Edit #2 ------------------------
For some reason, when I copy the url, it goes back to that page. Should have checked before I copied the url. Fixed url.
Hagi37 said:
I can't find it on their website, would you be able to provide the product number or a link to where I can buy one?
Thanks
--------------------EDIT-----------------------
Found it, for whose who are interested.
Click here
Click to expand...
Click to collapse
That's not the one I got, I'm just using the regular mat one, it's not a privacy screen protector. I can't find the exact shopping link, but the package looks like this, except the one in the link isn't mat. This screen guard comes in two types, clear or mat finish.
http://www.yesasia.com/us/capdase-p...amond-pda-phone/1011133846-0-0-0-en/info.html
EDIT: The mat one has the word "Excellent" instead of "Crystal Clear" on the package, it comes with a tiny cloth too, see attachment pictures.
It's not just scratches to consider, I have had mine for a week and I just put a screen protector on when it arrived in the mail and it doesn't attract nearly as many fingerprints and smudges, I was wiping the screen constantly before I put it on but I just sent several messages with my fingers and there's hardly a print on the protector.
i used to have a screen protector on it (the one supplied) but the corner started peeling off then i got annoyed with it... so there is now no protector on it. its been like it for about 6 months. its been kept in my pocket (with nothing else) and has only collected a couple of small scratches, which would probably come out with acrylic polish.
I didn't use a screen protector and regretted it as I picked up a fine collection of scratches. This reduces the resale value of the phone and alos on a screen with such a high dpi scrthes make a big difference.
However The screen also cracked seperatley, so it's off for an insurance job, after which it will be behind a screen protector/slip case.
I used the origonal one for 6 months and it was ok till the end. Replaced it with a cheap one from Ebay and after a few weeks it has bad scratches on it.
Next time i am going to replace it with an expencive one.
At first when I bought my diamond I used the invisible shield. Took the screen part of the shield off immediately because it felt to rubbery. I have been with no screen protector since and I have some hairline scratches, but they really don't bother me. When the screen is turned on they are unnoticeable. The truth is by the time the scratches start bothering me it's a great excuse to buy a new phone anyways( even though I really love my Diamond).
Nice one cheers people. Think i'll probably replace my invisi shield it does work really well it's just a shame it's peeled at the edges. It just makes the phone look messy.
Shame they didn't make it with a really durable scratch proof screen.
Cheers
I can't do that to my phone , i have sweaty palms most of the time
Sorry, posted the wrong url.
http://www.xell.hk/e/product/product_detail.asp?sku=5747&mscssid=JBF6GWNMU8689PPNVPH1M8TC1VNK1LN5
Naw, I've been sporting the geek look and using the supplied holster, but since I work in an office, everyone has a holstered device of some kind.
No scratch!!!!
This is what i got..... 10 screen protectors for $10 from ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=140303615709
They work pretty well actually..... as good as the one that came with the phone~!
Last time i bought the HD2 silicon case with the two screen protector worthed about 5 dollars on eBay. Then soon i found the problem was that the bot screen protectors wont fully stick on the screen (bubbles everywhere) even though i spent lots time to get rid of the bubbles, but they are totally unqualified product..
And now i am looking for the better screen protectors, just searched on ebay and hundreds of the results coming out and i am wondering which one would fully stick on the screen without bubbles. Can anybody recommend some good screen protectors? Thanks
I highly recommend Realook from Amazon. They are dry install covers and if put on properly show almost no bubbles. The reason I like these the best is that they feel most like the actual glass of any that I tried. The rest are more rubbery and dont allow your finger to glide across the screen as well as these do. This particular one covers the bottom under the buttons so there is a slight bit of lifting on the lower corner. This is covered up by my case anyway so it's no bother.
2 pack $11
Lifetime Warranty
Link to Amazon
make sure you get the right one for EU or TMO version.
I don't use any screen protector. I have used one for 1 yr but it degenerates the quality of the screen. Besides, the screen itself is pretty good in preventing scratches.
techboydino said:
I highly recommend Realook from Amazon. They are dry install covers and if put on properly show almost no bubbles. The reason I like these the best is that they feel most like the actual glass of any that I tried. The rest are more rubbery and dont allow your finger to glide across the screen as well as these do. This particular one covers the bottom under the buttons so there is a slight bit of lifting on the lower corner. This is covered up by my case anyway so it's no bother.
2 pack $11
Lifetime Warranty
Link to Amazon
make sure you get the right one for EU or TMO version.
Click to expand...
Click to collapse
Why don't you go to Amazon and write a review? There are none on their page.
You can use brando. The screen protector are great,invisible,resistant and thin...great quality !
stevedebi said:
Why don't you go to Amazon and write a review? There are none on their page.
Click to expand...
Click to collapse
done. good idea.
I'm in the no Screen protector camp, owned the phone for 14 montys and not a scratch on the screen, a soft or hard case is fine if you are worried or careless
I Use Martin Sheilds screen protector. I have stuck to this because of durability and feel. Plus side is you cant even tell you have one on
i bought the stock T-mobile branded ones the day i bought my phone. there were 2 in the pack, and im on the last one. i really like the slightly hazy anti glare that it provides. i recommend those ones, but does anyone know of any that are just as good, but dont cost as much? i had the first one off after it wore out after 6 months, but IMHO, the bare glass is just too shiny and reflects everything outside in my experiance, so i put the second one on.
tednelson83 said:
i bought the stock T-mobile branded ones the day i bought my phone. there were 2 in the pack, and im on the last one. i really like the slightly hazy anti glare that it provides. i recommend those ones, but does anyone know of any that are just as good, but dont cost as much? i had the first one off after it wore out after 6 months, but IMHO, the bare glass is just too shiny and reflects everything outside in my experiance, so i put the second one on.
Click to expand...
Click to collapse
These are the best. I've had invisible shield, phantom skinz, body glove. They all suck compared to the tmobile one. They last forever. Had mine on for 8 months and its still looks new.
Has anyone tried the ishield? Its cool man. WHat can you say about it?
I ordered the best skins it is same quality and cheaper price but much more clearer than zag and of the same quality. Just fitting it now takes time if you want to do a proper job like me i will upload pics of it when i am done.
jutley said:
I ordered the best skins it is same quality and cheaper price but much more clearer than zag and of the same quality. Just fitting it now takes time if you want to do a proper job like me i will upload pics of it when i am done.
Click to expand...
Click to collapse
i did pretty much the same thing, its a pain trying to install the shield without getting dirt or dust underneath but when its finally done it looks great
i see i see. can you post a site about your best skin so i can look further. thanks
vdciii said:
i see i see. can you post a site about your best skin so i can look further. thanks
Click to expand...
Click to collapse
http://www.bestskinsever.com/sony-ericsson-xperia-skin
I went with bestskinsever too but not fitted it yet, will do today or the weekend, can post pics if need be....
Just bought the body one as the screen protector it comes with is great and a better job than me doing it.....
I have been fitting thease things for years and can do a very profesional job of it you cannot tell there is a skin on it when i finish with it i think mine will be finished today i hope but its looking good.
I strongly dislike the Zagg protective shields. The touch feel is horrible with them on. I rather get some scratches than use them. I had one a little while on another phone but ripped it of after a few hours.
Besides. There's already protection on it? I would like to get another one of those original ones instead. You can hardly see nor feel it.
Well i guess that's your opinion.
dannejanne said:
I strongly dislike the Zagg protective shields. The touch feel is horrible with them on. I rather get some scratches than use them. I had one a little while on another phone but ripped it of after a few hours.
Besides. There's already protection on it? I would like to get another one of those original ones instead. You can hardly see nor feel it.
Click to expand...
Click to collapse
i got mine for resale purposes, not that im planning on selling it any time soon, but a mint condition, sim free, white xperia play r800i should go for more then a scratched black one
Hi vdciii.
I've had the invisishield installed on my phone. Since you're also from the Philippines, there is an official store that installs them with lifetime warranty (if it gets torn or damaged, 400 for "shipping"). So if the protector gets loose, they can also fix it for free, just do this before dirt gets in. I got it for only P1500.
The only thing I dislike about it is that there's a certain friction with your finger sometimes that annoys me, but it works. It also gets a bit finger print dirty but nothing a good wipe can't fix.
fvig2001 said:
Hi vdciii.
I've had the invisishield installed on my phone. Since you're also from the Philippines, there is an official store that installs them with lifetime warranty (if it gets torn or damaged, 400 for "shipping"). So if the protector gets loose, they can also fix it for free, just do this before dirt gets in. I got it for only P1500.
The only thing I dislike about it is that there's a certain friction with your finger sometimes that annoys me, but it works. It also gets a bit finger print dirty but nothing a good wipe can't fix.
Click to expand...
Click to collapse
hello!
yeah, i find it a little bit annoying too. but for an exchange of full body protection, i think it's okay for me.
But what annoys me more is the thought that not all parts are protected. the white metal on the screen part is not protected which is different from what i have seen in the sites here. i thought of double checking the other ishield for xperia play when i have time.
How's your xplay now anyway? does it still have the ishield up to now?
vdciii said:
hello!
yeah, i find it a little bit annoying too. but for an exchange of full body protection, i think it's okay for me.
But what annoys me more is the thought that not all parts are protected. the white metal on the screen part is not protected which is different from what i have seen in the sites here. i thought of double checking the other ishield for xperia play when i have time.
How's your xplay now anyway? does it still have the ishield up to now?
Click to expand...
Click to collapse
My xp is still protected by invishield up to now. Other than the dirty screen, I think it's good enough naked. It's just hard to find silicone/crystal cases for this phone in this country.
I have used my Invisible Shield since i bought my Play in august. Still no scratches Just bought the Play Dock too
Sent from my R800i using xda premium
I'm very disappointed in Invisible Phone Guard. It appeared to include more coverage bits than any others on eBay and was described as being thinner than the others and compatible with "any" case. It seems as thick as any Zagg shield and includes NO corner protection/coverage. The right-side piece only surrounds the volume buttons and does not run the length on the side like that carbon fiber style one someone else has here. Though there are pieces to cover the trim above the screen and below the buttons, it has none to cover teh silver bits on the left and right of the screen. It also includes no protection for the L & R buttons. I think the Zagg Invisible Shield option with all the extra bits would have more coverage but they don't show it on the site.
Oh, did I mention that the microfiber cloth was full of lint? Also, even though I tried to align the screen protector with the top of the screen it is touching the bottom and seems to be causing my home button to stick down. It should have been a little shorter! Before reinstalling my Otterbox Commuter I noticed that the clips that go over the top and bottom were fractured and, sure enough, they cracked through and flaked off when probed with my fingers. When I snapped in on the phone, I saw new stress fractures appear.
I'm not happy with the Otterbox Commuter either, but that's for another thread.
I dont understadn, what's the difference between this and another normal screen protector?
Dany XP said:
I dont understadn, what's the difference between this and another normal screen protector?
Click to expand...
Click to collapse
First of all, what do you consider "normal?" Traditional Zagg Invisible Shield screen protectors have an adhesive and require wet application, while they now have a new line of "dry" protectors that are likely more like the alternative stiff film variety (dunno. haven't seen one). The original Invisible Shield is a very tough elastic designed for things like the edges of helicopter blades and it adds what has been described as an "rubbery orange peel" texture as opposed to the smooth texture of many others. It feels a bit sticky when perfectly clean. There are many others that use the exact same material, like the Invisible Phone Guard that I mentioned earlier. Zagg charges more than most alternatives and has different options, including screen, full-body, and another that has little bits to cover every part if you are dedicated enough to bother installing it.
Its great, I have had one on every smart phone that I have had, I have never gotten scratches on it either.
Sent from my R800a using XDA App
I have it on mine, I think it was a bit much i payed 38$ for mine just because i got the phone for free with upgread. Its the full shield and its not so bad. Makes ur phone super glossy. For the protection its worth it. And yrs the finger doesnot glide like it did but really not that bad this phone aint cheap rimember that. Zagg works
Sent from my R800x using Tapatalk
I have had the shield before and it covers well due to it being thicker then most covers, however the feel of it is very resistive. Which I do not like.
Also, I have had 2 friends who after many months of using the shield on their phones had issues with their touchscreens going out. If I recall over time the zaggshirld will damage your touchscreen digitzer. When I finally removed my zaggshield it was all yellow.
My opnion do not touch a zaggshield yeah they really protect your phone until the touchscreen takes a crap on you.
Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.
Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.
hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.
Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/
asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.
I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.
jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936