Reading e-mail: starts in middle of message - Tilt, TyTN II, MDA Vario III General

When I read e-mail, the cursor automatically goes to the middle of the message instead of starting at the top. I can't find another comment on this.
I have the stock AT&T ROM (I know, lame), Kaiser Tweaks, and standard e-mail application.
Any ideas?

karch4 said:
When I read e-mail, the cursor automatically goes to the middle of the message instead of starting at the top. I can't find another comment on this.
I have the stock AT&T ROM (I know, lame), Kaiser Tweaks, and standard e-mail application.
Any ideas?
Click to expand...
Click to collapse
Had same problem myself.
Check out this thread, http://forum.xda-developers.com/showthread.php?t=351296
Maybe similar to your problem?
I am sure this never happened to mine before either.
EDIT: Just to test I backed up my phone and did a hard reset. Lo and behold it was fine without Kaiser Tweaks! Will let the guys know on their thread.

This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.

RemE said:
This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.
Click to expand...
Click to collapse
True True!

Many thanks
RemE said:
This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.
Click to expand...
Click to collapse
This is the solution! I disabled the nav pad scrolling in IE in the Kaiser Tweaks and soft reset. I use Opera Mini as my internet browser so I am not sure why I enabled it in the first place.
Thank you very much. I really appreciate it.

Related

Unresolved Tilt Issues (Please Contribute)

Ongoing issues that need to be resolved - If you respond to any of these before you write any response PLEASE put the issue number at the top of your post, because this thread is going to get very large fast and this will help keep it somewhat organized, thanks.
#1: I have tried everything but can dump the time & battery icon off the title bar without alignment problems. Anybody find a key yet? Are we stuck creating new icon templates in black to save us from the alignment issue? Or has someone found a key to compensate the alingment loss from removing both time & battery status icons?
#2:Does Video Share work on the Tilt if you have an HTC ROM on it and are connecting with a Video Share enabled phone? (obviously this will only be applicable for people who live in the selected 3G networks for which Video Share is supported)
#3:When I make/recieve a call, and I try to access the top bar (start button) the top bar locks up. if I try a shortcut button to IE for example, IE loads but just says connecting... if I hangup the call, it redoes the 3G connection (it was 3G before I was on the call) and the IE works.
BUT the top bar is locked up. Start/3G icon, etc doesn't click. Only the "X" will work until I do a reboot.
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
#5
Is there a way to choose radio frequency besides using Bandswitch? Meaning the setting would show up in the Phone Settings menu that allows Band Selection. Perhaps there are some registry edits out there?
Here is a cab file that replaces "PhoneSettings.Dll" with the one from the Rogers Canada Tilt Rom. and enables the Band Tab. You will be required to reset your phone after installation.
#6
There have been issues regarding connecting to WEP encrypted networks...if anyone else knows of these issues and a possible fix, please contribute...whitelisting the MAC address on the router has already been attempted (and failed).
This post has been moved and temporarily stickied.
Please be sure to visit the Wiki. Most of your questions can be answered there regarding the Tilt.
The previous thread, "The thread to address ALL TILT-specific questions" has been unstuck, but can still be used if required.
Have fun!
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
kireol said:
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
Click to expand...
Click to collapse
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
GSLEON3 said:
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
Click to expand...
Click to collapse
errrrrr. If you flash the identical ROM on a TyTN II and a Tilt, how are the files in the windows directory any different?
I think you misread what I typed.
OK, after serching in many forums, i found that the problem is:
"When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work."
So, acording to this, there are two solutions:
1º Sinple turn of pasword protection if you don't need it;
2º (found in modaco) Change a registry entry:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplay DuringCall
From "1" to "0" will stop it but be warned if you arent using a headset then the touch sensitive screen will be in operation throughout the call so you may end up with your ear triggering applications etc...
cheers
HTC Kaiser QuickGPS Fix (Error solution)
Just import this .reg file into your Kaiser registry:
http://myego.cz/img/htc-kaiser/quickgps.reg
Nasty Camera
My phone works ok I guess and I am pleased with it. But I miss not being able to take photos with it. I used my TYTN all the time primarily as a mobile video station and a camera. But this KAISER is a complete mess when it comes to taking photos.
My point is, can someone tell me how to turn off the auto focus is thats the problem or does anyone have any idea how to speed up the lens to capture time. It takes forever to set its focus. Oh, and don't start me on video capture as that IS the joke of the century.
I can't believe what a step back this KAISER is in comparison to its older brother the TYTN. I expected this phone to at least take a moderate picture. Why on earth is the 2nd camera better (VGA) than the 3MP main camera. It is completely crazy.
I digress and am off to cry now.
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
ConcaveLiNkiN said:
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
Click to expand...
Click to collapse
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Hey, actually I have a problem synchronizing. I have been told that if a Kaiser is connected to a PC through Activesync, then the Kaiser could use the PC's Internet connection. And I think that is great, except mine won't. Instead my PC will try to use my Kaiser as a modem, even though it is already connected.... What can I do?
caulirick said:
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Click to expand...
Click to collapse
Hi caulirick,
thank you so much. That explains why, sometimes I see "reply" and sometime I see "view".
Again, thank you so much
Cheers
eRic
Doug2873 said:
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
Click to expand...
Click to collapse
DoubleLauncher also includes similar functionality, but with even more options:
single tap, double tap, single hold, double hold, triple tap - 5 combinations per button - HTC may be right that it isn't possible with vanilla windows, but it is obviously possible to code something.
wifi vs AT&T
Sorry for asking a question that I am sure was already addressed (unfortunately I cannot find it).
How do I instruct my AT&T Tilt (Kaiser) to try to connect using WiFi when it is present rather then connect using AT&T GPRS, 3G whatever?
When I bought my phone in October, I got advice from Howard Forum to go to your site (http://forum.xda-developers.com/att...22&d=1191864241) to get a cab file. I did that, and it worked.
I had to replace my phone which was defective, and now I wanted to get the same cab file for the new phone but the link no longer works.
Your advice and help will be very much appreciated. If you prefer you can send me a private message to [email protected].
upgrade??
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Scrog said:
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Click to expand...
Click to collapse
Well, the Video Rendering sucks. All in all though, I have to say I really like the device. It's okay out of the box, but after tinkering & tweaking I have to say that I'm glad I moved to the Kaiser. The GPS is solid for me & after changing my DNS settings to OpenDNS the internet is fast. I tether a lot & get great speed on my laptop (when in HSPDA or 3G). Yess, there are some issues, but I think it's the best device around. I've had no problems with my Tilt or my TYTN II. It works really well with our Blackberry server & I get my emails fater on my device than on my pc.
The only issue for me again is the video. But it's mostly a work device for me, so vide isn't a big deal. Besides TCPMP playback is good enough for catching up on my missed episodes of House MD.
I'd say go for it.
Hi all,
I wonder if this is even consider a problem or bug. At the Today screen, there will be times when you are overflow with schedules. Then a scroll bar will appear at the right most of the screen(as shown below left). The scroll bar stretch all the way from the top of the screen to the bottom of the screen. Is it possible to change it to such a way that the scroll bar starts from the bottom of the Today plug-in to the bottom of the screen(as shown bottom right). Please kindly advice if this can be done.
Thanx
Cheers
eRic
You can use HHC (home plug-in config) to lock the home plug in. Then the scroll is just at the bottom. There is a registry setting to do the same thing, but I don't know what it is. The HHC is a great utility as you can back up the plug in and change the fonts and icons too.
OpenDNS
GSLEON, where does one change DNS settings to the OpenDNS settings? Thanks.
What can I do???
Hello all,
I am on my second Tilt now (on AT&T network) but I am still having voice clarity issues. Very choppy conversations at times, even when connected to a landline, but there are always at least 2 signal bars & 3G displayed. I have tried to disable the data before making calls, but so far I have seen no improvement. Could Active sync have something to do W/ my problem? It always seems to be running. Also, I am using the stock AT&T rom.
Any input provided pertaining to my issue is greatly appreciated.
Tobe

Function for Contacts is now video call after official rom upgrade ... HELP !!!

Hey Folks
I upgraded to the official Hong Kong ROM upgrade on my HTC Diamond & whilst impressed by the speed improvements I have a major bug that annoys the hell out of me & thus hope some genius reading this can help fix the problem
On the home tab using the "phone" icon it then shows recent calls. However the left hand button that used to show "contacts" now shows "video call". I never want to make a video call & contacts is far more useful .... but there is no obvious way to change the function
Hoping someone can help
Chill dude.
This ain't a bug, it's a feature.
Personally, I do find video-call usefull, but ill prefer "send SMS"
Do U really need contacts? You can use the keypad T9 to find the person U want to call easily...
Circle your finger around the middle button and it rips thru contacts!
kgb-agent said:
On the home tab using the "phone" icon it then shows recent calls. However the left hand button that used to show "contacts" now shows "video call". I never want to make a video call & contacts is far more useful .... but there is no obvious way to change the function
Click to expand...
Click to collapse
Use your favorite registry editor to navigate to [HKLM\Software\HTC\Manila] and change the following values:
"HomeLSKPath=addrbook.lnk" 'that's the application you want to use
"HomeLSKText=Contacts" 'that's the text that will be displayed on the left soft key on your Home screen
Do a soft reset.
Now your Left Soft Key will display Contacts, so when you press it, you shoul go directly to your contacts. Enjoy!
I've changed mine to Comm Manager.
heretic said:
Use your favorite registry editor to navigate to [HKLM\Software\HTC\Manila] and change the following values:
"HomeLSKPath=addrbook.lnk" that's the application you want to use
"HomeLSKText=Contacts"
Now your Left Soft Key will display Contacts, so when you press it, you shoul go directly to your contacts. Enjoy!
I've changed mine to Comm Manager.
Click to expand...
Click to collapse
Are those for the phone app or home sceen?
Blazeitup123 said:
Are those for the phone app or home sceen?
Click to expand...
Click to collapse
Those are for the home screen (Home tab of Manila TF3D).
heretic said:
Those are for the home screen (Home tab of Manila TF3D).
Click to expand...
Click to collapse
Do you know the keys for the phone app? I bet there are 100 people wanting those. I think that is what kgb-agent is looking for.
Blazeitup123 said:
Do you know the keys for the phone app? I bet there are 100 people wanting those. I think that is what kgb-agent is looking for.
Click to expand...
Click to collapse
I don't have a clue how to change softkeys within the phone app, sorry. Looks like I have misread the original post...
Thanks Heretic & others
Yep ... me & 1000 others want to change the key in the phone app
With CT's rom version 4 if I tap Phone soft key on Today screen then tap the little phone icon between the video call and menu softkeys it removes the keypad and leaves me with last call and contacts list...
No ideas anyone .... it is really bugging me
For me i just disabled the phone skin with the Advanced Config tool. It reverts back to the old WM6 design. I still prefer that. Do note that once u do this, the vibration when a call connects is disabled.
Hey KGB-Agent, I have exactly the same problem...and it is bugging me as well! I upgraded my dutch ROM yesterday :-( Another problem I have is that when I look at my contacts the SIM contacts are not displayed, even when I configure this in Advanced Config Tool...HELP! Anyone else an idea how to fix???
Your contacts are opened when your in the phone app, just scroll! why do you want it to open another contacts process when its already there?!? up and down or as i already said circle the middle button with your finger
Hi Blaze,
Circling with my finger in the middle button doesn't work for me. Furthermore, with "Contacts" I could quickly scroll down with the Alphabet on the right to f.e. the letter Z. The way you recommand it takes me ages to get to the "Z"!
I called the HTC helpdesk, they advised me to do a Hard Reset. Of course...that didn't work...:-(
Go to start and choose contacts its the same screen.
I agree the videocall is a bad choice from the makers of this rom.
Most people do not use this kind of calls.
Grtzzz
I have the same issues with the loss of functionality Ries
I cant believe there are not more complaints
I emailed HTC 4 days ago with no answer :<
@kgb-agent: I phoned the helpdesk. They said I had to do a hard-reset!?! I couldn't believe it, but okay, I tried it...and what do you think: I still have the problem! :-( I guess we have to live with it...bad choice from the developers...
same problem
up
Two things:
1) why don't people use the smart dialling feature? this is where when in the phone keypad, you just spell out your contact using the alphanumeric keypad (it uses T9 to search) and it displays your search results in real time at the top of the dial pad... MUCH easier than the contacts screen - try it.
2) circling the middle button with your finger does NOT work for me, i have no idea how that is working for you since the diamond is not meant to be able to scroll using that 'wheel' unless you have installed some 3rd party software for it, or its unique to your ROM/region.

HTC Touch Pro scroll wheel

Hi everyone. I have the HTC Touch Pro and I was wondering if there is a way to let the scroll wheel acts like the one on ipods in order to navigate through the songs instead of finger scrolling. It would be easier and quicker I think.
use the diamond tweak program it has the option to do that
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
Which program?
it is called diamond tweak
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
chemical349 said:
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
Click to expand...
Click to collapse
Now Now... we may aswell be nice on this forum... we have members of varying abilities... Remember everyone is special.
Just search for Diamond Tweak... copy the cab to your memory card. double click to install it your device - I suggest you install it on your memory card to save memory on the device itself...
Reset and open the new program (which should be found in your "programs page" near the end of the list you will find the option to set the wheel to scroll.
I hope this helps.
Rgs,
J
thanks man,
i think i was kind of mislead by the previous thread.
the subject was ask about how obtain more function for the scroll wheel and the answer follow seems to be suggesting the tweak.
infact the diamond tweak is much more powerful then just to enhance the scroll function. the other functions was quiet useful indeed.
wish everyone like it as i do.
V.
scroll wheel
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
I also have the touch pro, and have installed the tweek. all programs are enabled to scroll which they all do except file explorer?? any insight??
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
scroll wheel
civicvx94 said:
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
Click to expand...
Click to collapse
Im still a little grey I guess, on my advanced config there is no option for >more settings> smart touch. is there a newer version that im not using???
i seam to have the same problem everything enabled but no scroll wheel any ideas thanks
i use this for scrolling, mine only work on the windows menus but i didnt enable it with Diamond tweak
also you cant uninstall this unless you hard reset, i figured i would let you know before you install it
i did not create this i am simply reposting it credit goes where credit is due
I had the scroll wheel working with the diamond tweak, have since had to hard reset and now I can not get it to work for any programs. It's drivin me nuts. Please help me out guys.
Just had it working in diamond tweak, I exited and tried it in file explorer, no luck so I went back to diamond tweak and its not working for that no either. wtf

[Q] [Solved] WM6.5 Disable SmartTouch Zoom in SMS Messaging

Anybody know if there is a cab or reg tweak I can apply to disable zooming in messaging when I hit the scroll wheel? I keep doing it by accident and it's really getting on my nerves.
Thanks!
Edit: Solved, see post #12 http://forum.xda-developers.com/showpost.php?p=4594396&postcount=12
I have this problem as well...really sucks.
Someone help? lol
haha, yah same here.
it gets annoying after a while...
I too would like a cab for that.
yeah i'm game for a solution...
maybe a quick reg hack or something. sometimes it goes haywire and i can't fix it unless i soft-reset.
omg this is driving me crazy!
is there a known fix for this f** functionality??
in for 1 too
i honestly don't see how this hasn't been addressed before?
I'm not sure if there is a better solution yet, but for now I have simply disabled SmartTouch entirely.
Grab a copy of FdcSoft TaskMgr, go to the Services tab and find the SmartTouch(SMT0) entry. Tap and hold, select Stop, then Set Manual, then Disable.
I don't use the scroll or zoom functionality for anything at all so this works for me. I found this info here: http://forum.xda-developers.com/showthread.php?t=462662
i dont think you would want to kill smarttouch all together. maybe just find and delete the registry entry for text messages. i think it is hklm\sofware\htc\smarttouch\outlook email. i dunno if thats really it but who knows.
elypsar said:
I'm not sure if there is a better solution yet, but for now I have simply disabled SmartTouch entirely.
Grab a copy of FdcSoft TaskMgr, go to the Services tab and find the SmartTouch(SMT0) entry. Tap and hold, select Stop, then Set Manual, then Disable.
I don't use the scroll or zoom functionality for anything at all so this works for me. I found this info here: http://forum.xda-developers.com/showthread.php?t=462662
Click to expand...
Click to collapse
dude...i dont care what anyone says about you. you are about the coolest person i know right now. this actually still allows me to use my zoom function in opera?
sho0z said:
dude...i dont care what anyone says about you. you are about the coolest person i know right now. this actually still allows me to use my zoom function in opera?
Click to expand...
Click to collapse
No, from what I can tell, it doesn't. I'm not going to test though because I finally did find a good solution.
After digging around the registry for a couple hours to no avail, I decided to start playing with programs that use SmartTouch. Lucky me I found one that disables zooming in SMS, is customizable, and doesn't mess up any other zooming functionality (ie: Opera). Yay!
My thanks to demosten for creating SensorScroll which can be found here:
http://forum.xda-developers.com/showthread.php?t=466377
Just install and soft reset. I had to play around with turning the service on/off (can be done from the start menu shortcut) and testing the zoom in SMS until I had the right size and zoom was disabled.
Hope this works for you!

Feature Request : Light Keyboard on Textbox Select

Figured I'd throw this out here...
Problem: When I have my keyboard open and I select any text entry box, I then have to press a random key or spin the trackball to get the keyboard to light up. Since I often use the trackball to do this, I end up moving my cursor out of the textbox and have to reselect it
What I'd like to see: The phone seems like it is smart enough to know when a textbox entry is selected and then check to see if the keyboard is slid out. If these two conditions are met, light up the keyboard. Simple?
Can anyone here write a hack to do this?
I second this great idea!!!
thirded!
bump! 10ch
We need this I agree!
Yup exact same problem for me. Perhaps not a 'permanent' light up... Just increase the timeout to say.. 20 seconds
You should be able to choose that as a setting for timing, so you can have it on for as long as your keyboard is out or timed etc. would be very useful
slm3 said:
You should be able to choose that as a setting for timing, so you can have it on for as long as your keyboard is out or timed etc. would be very useful
Click to expand...
Click to collapse
umm personally i think it'd be better the way the other guy said it.the one where it it'll come back on when a textbox is selected. cause i tihnk if you just keep it lit up longer it'll waste more battery even though your not using the keyboard at the moment. (tho im not sure which wastes more battery, the setting for it to light up when it needed, or keeping it lit up longer)
either way, i'd love to see this feature too!
I've got the same problem myself, very good idea. I've just passed this onto cyanogen via twitter and his google code page.
NPerry said:
I've got the same problem myself, very good idea. I've just passed this onto cyanogen via twitter and his google code page.
Click to expand...
Click to collapse
did he reply?
I found this in case it helps anyone.
http://androidcommunity.com/forums/132643-post20.html
bomp bomp bomp

Categories

Resources