When changing sound profile I have to go to Settings - Sound - and choose my profile. The "old" HTC Home had a profile tab. Isn't there an easier/faster way to change sound profile?
Do you mean like click the volume up\down button on the left of the phone and select silent, vibrate or change the volume?
Even easier
hallatore said:
Do you mean like click the volume up\down button on the left of the phone and select silent, vibrate or change the volume?
Click to expand...
Click to collapse
...
Go to Start->Settings->System->Long Press End Key->choose: Set Vibrate/Ringer
Nothing easier possible, but the "Shaking" method explained elsewhere here.
Enjoy,
====
Saar
Do a prolonged bottom right key press and a menu will come up with one of the options being vibrate mode or ringer mode (it is a toggle).
You can also set it such that the prolonged key press toggles the two modes, rather than bring up the menu.
I noticed that despite changing in call volume settings and system volume settings, the volumes are linked together.
Has this always been the way? I seem to recall my WM6 phone (Hermes) remembering in call volumes and keeping it seperate from the system volume -but I may be wrong.
I want to lower my in call volume, but the hardware volume buttons don't seem to make that much of a differnce - and not to mention they adjust the system volume as well.
I have read through all the other volume related threads I can find. I think this is the first time someone actually wants to lower the diamond's earpiece volume!
Effectively you have 3 volumes. Unless you are in a call then the volume buttons only give you access to the system and ring volumes. As far as I know you can only adjust the in call volume in call (there will be a registry option also but I don't know where sorry).
Anyway when you start your call before you put the phone to your ear (and the screen goes off) press volume up or down and it will change your call volume.
I figured out what it was... it was due to me disabling the diamond phone skin.
You lose volume functionality.
And if the settings is "silent", even the music player, via earphones, is silent?
RandomDude said:
I figured out what it was... it was due to me disabling the diamond phone skin.
You lose volume functionality.
Click to expand...
Click to collapse
Can you elaborate?
I've disabled the Diamond skin yet I am able to independently adjust the in-call volume... in-call. System/ringer volume is adjustable at all other times.
Mathew
MJNewton said:
Can you elaborate?
I've disabled the Diamond skin yet I am able to independently adjust the in-call volume... in-call. System/ringer volume is adjustable at all other times.
Mathew
Click to expand...
Click to collapse
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Ah, yes, I do seem to recall having disabled the HTC Volume too with DiamondTweak.
Mathew
dscannell said:
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Click to expand...
Click to collapse
Hi guys,
I do not want to use "Diamond dialer Skin" because of the S2U2, so I have disable it. However, there is no way to alter the in call volume (I have activate and deactivate HTC volume control with Diamond Tweaker, but no way).
Any help?
Thanks in advance
No one has solve this trouble? It is making me crazy!
Why does the dialler skin interefere with S2U2?
simcarloc said:
Why does the dialler skin interefere with S2U2?
Click to expand...
Click to collapse
Each time a call is incoming, in the first few seconds the dialler skin appears. After that, the normal S2U2 screen appears again (with "slide to answer"...). If you touch accidentally the option "Answer" of the dialler skin by accident in these few seconds, it will answer the call.
I have added something in the registry (to be honest, I can not remember right now) that it was supposed to fix this trouble, but no way...
dscannell said:
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Click to expand...
Click to collapse
Does that mean the volume buttons will no longer work during a call but you will get a volume adjuster on the screen...or will the volume buttons still change the in call volume. dont know about anyone else but I find the volume buttons a bit too fiddly and 'sunk' too far...probably nicer to look at though...
I mean that the volume buttons will not work any more. The only way they work in my Diamond is activating "Diamond Dialer Skin", but with this, I get the S2U2 problem...
RinCEWinG said:
I mean that the volume buttons will not work any more. The only way they work in my Diamond is activating "Diamond Dialer Skin", but with this, I get the S2U2 problem...
Click to expand...
Click to collapse
And a big memory comsumption!!!!
I've disabled phone skin too... and have the same problem. Hard to find the good key in the registry!
Some help are welcome!
THX!
No one has solved this problem?
It is not a big problem, but it is making me crazy...
try this regkey
I maxed up my in call volume, and found this DWORD regkey to be changing to FFFFFFFF (8 F's hex value).
Can you try?
HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides\SavedInCallVolume
pwhooftman said:
I maxed up my in call volume, and found this DWORD regkey to be changing to FFFFFFFF (8 F's hex value).
Can you try?
HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides\SavedInCallVolume
Click to expand...
Click to collapse
Thank you very much for the answer.
Anyway, I do know how to configure the volume (I use a "Profiles" software that can adjust the volume). The point is to be able to change the in call volume during the call.
To be honest, I can hardly believe that no one has deactivate "Diamond Skin Phone" and had no trouble with this
I'm using the dialer skin, but when i am talking with someone, adjusting the volume up/down, it always reset it to lowest. Any advice?
hi!
I have a small wish:
I would like to avoid that people in my office hear when I dial a number in the sound Normal profile.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
If I use the Vibrate profile, fine no problem there is no sound. But that is not what I would like..
Maybe you have an Idea
franculito said:
hi!
I have a small wish:
I would like to avoid that people in my office hear when I dial a number in the sound Normal profile.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
If I use the Vibrate profile, fine no problem there is no sound. But that is not what I would like..
Maybe you have an Idea
Click to expand...
Click to collapse
hi, if you go to phone/ menu / options "keypad" change "short tones" to off
hi!
I have a small wish:
I would like to avoid that people in my office hear when I dial a number in the sound Normal profile.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
If I use the Vibrate profile, fine no problem there is no sound. But that is not what I would like..
Maybe you have an Idea
Hey, if you use the volume rocker on the side you have the option to decrease the system volume and ring volume.
So decrease the volume on the rocker and then look at the top of the screen... click "System" and decrease the volume to zero.
Hope that helps
franculito said:
hi!
I have a small wish:
I would like to avoid that people in my office hear when I dial a number in the sound Normal profile.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
If I use the Vibrate profile, fine no problem there is no sound. But that is not what I would like..
Maybe you have an Idea
Click to expand...
Click to collapse
If you just wanna turn off the sound when dialing a number go to settings => personal => phone. There you you should find an option to change the behaviour when using th edial pad (nothing, vibrate, short sound etc)
May be this helps
in Homescreen - Phone / Options / Phone bookmark / Keypad: Off
Why are u starting the same threat 3 times ?!
hi!
I have a small wish:
I would like to avoid that people in my office hear when I dial a number in the sound Normal profile.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
If I use the Vibrate profile, fine no problem there is no sound. But that is not what I would like..
Maybe you have an Idea
Go to Settings>All settings>Personal>Phone and then change the value in the dropdown next to 'Keypad' to off.
If I go to Settings/sounds and try to diminuish the System Volume (on the bottom of the screen) also the Rings volume will change?
Click to expand...
Click to collapse
You can separate System and Ring volumes too, from the same page.