Database Develop

Anyone out there?

Hey, does anyone else use this device? If so, have you tried using the cheap headset that comes with it, and does the button on the headset do anything for you?

It's about time!
Rock on!!! They finally made a section for this device!! Unfortunately, I cannot help you with your question... sorry about that.

I don't use the headset that came with the device. I hate wired headsets. I use a BT headset on all my devices.

I used the headset and it does work for Answering calls not sure about ending calls. Just hold it for few seconds and it should answer the incoming calls.

Using bluetooth headset to hear media

hi,
i dont know if this theme was already posted here, but here is my question:
can i use the bluetooth headset to hear media player and divx player?
thanks,

anyone??
yhanks

Listening to media files on BT headset
If you are using a simple mono BT set of the type attached to one ear, the answer is usually no, you can't. You need a stereo BT headset (Jabra BT620 or similiar from HP, Nokia etc.) supporting the Advanced Audio protocol A2DP. Then you can listen to music and when receiving incoming calls, the music will mute until the call is finished. Works perfectly on the Trinity.
Regards
Zigo

It can be done
See here
Gary

thank you. i will try and read this info.

Can someone please answer this
I have read everywhere and see people make apps for some weird things, but still do not see an answer on how to Get a MONO headset to work with WM6 on a trinity. Who has it working and which of the hundreds of bluetooth apps r u using? Video mostly and gps application for headset.

Bluetooth Headset & Audio

I just got myself a new bluetooth headset (Jabra 8040). This model allow stereo music streaming as well. The problem i face is that once i pair the bluetooth, the ring tone and sms tones goes direct to my headset and does not ring on the pda as it normally would.
My question....is there a software that allows me to decide if i want it for handfree or for listening to music. I know i can do this via the settings in bluetooth but that is just too many steps.
I'm not sure if what i ask above is understandable cos i honestly cannot figure out how else to ask this question. Any pointers would be great. Thanks

When you pair you should get the option for headset and audio streaming.
Just select audio stream and it shouldn't send the phone calls to the headset.
Cheers
adam

That's the thing....when i select audio streaming, both music and ringtone & sms tone goes to the headset. If i select handsfree, then it works like a normal bluetooth handsfree but i don't have the option to use it for audio anymore.
I'm hoping to have a program or something to select or enable audio when i want to listen to music & then disable it and use it for handsfree when i don't want music.

If you go to Settings > Connnections > Bluetooth you should see the profile for the device. Click on it to edit and you will see two options, One for "Wireless Stereo" and one for "Headset". Make sure only the "Wireless Stereo" is checked and then click Save. This should do what you want, but I have never actually tried it myself. If it does not work, it may be the device you are pairing (some seem to work better then others). May someone who has tried this with another model can confirm it works correctly.
The part I am not sure about is where the sounds will go. So in the mode, music should go to the headphones, but what about alarm reminders, or along the same lines, the ringtone. I am not sure. I think there will still be some sounds that go to the phone speaker and I think the BT Audio CAB in the Latest CABS sticky can be used to toggle this, but there is little info about it in the post. If you are interested in using it, you may want to search and see if you can find more info.

jgermuga said:
If you go to Settings > Connnections > Bluetooth you should see the profile for the device. Click on it to edit and you will see two options, One for "Wireless Stereo" and one for "Headset". Make sure only the "Wireless Stereo" is checked and then click Save. This should do what you want, but I have never actually tried it myself. If it does not work, it may be the device you are pairing (some seem to work better then others). May someone who has tried this with another model can confirm it works correctly.
The part I am not sure about is where the sounds will go. So in the mode, music should go to the headphones, but what about alarm reminders, or along the same lines, the ringtone. I am not sure. I think there will still be some sounds that go to the phone speaker and I think the BT Audio CAB in the Latest CABS sticky can be used to toggle this, but there is little info about it in the post. If you are interested in using it, you may want to search and see if you can find more info.
Click to expand...
Click to collapse
Totally correct, adding to this, when you select 'Wireless stereo' It routes all sounds that would normally come out of the main speaker to the headphones (rings and notifications) audio in a call is either internal or external earpiece under 'Hands Free'. It does this so that when just listening to music, you do not miss a call or message!
If you only want music, put the phone into flight mode (nothing at all) or go to sounds and notifications and have all your incoming (calls & messages) set to vibrate only.
Hope this helps also.

Scann69 said:
I just got myself a new bluetooth headset (Jabra 8040). This model allow stereo music streaming as well. The problem i face is that once i pair the bluetooth, the ring tone and sms tones goes direct to my headset and does not ring on the pda as it normally would.
My question....is there a software that allows me to decide if i want it for handfree or for listening to music. I know i can do this via the settings in bluetooth but that is just too many steps.
I'm not sure if what i ask above is understandable cos i honestly cannot figure out how else to ask this question. Any pointers would be great. Thanks
Click to expand...
Click to collapse
How above the performance of Jabra 8040? Any sound skipping?

Thanx for the reply guys. That is what i want. Currently YES i'm able to toggle between using the bluetooth as a handsfree or for music via the settings->edit. I'm just wondering if there is a simple way like via a software which i can just tick and untick to either enable handsfree or music?
The Jabra 8040 is good. I like it and no i don't get any sort of skipping while listening to music. I would recommend this unless of course u are a hardcore music person. I'm not....it's only for once in a while sort of thing.

Recording Phone calls

Is there a way to do this with the tilt? i have used google and found LivePVR but you need it to be in speaker phone mode.
was thinking about using my BT headset with a splitter, one to my pc and the other do the headset, i have the Plantronics Pulsar 260, but that would mean i have to be near my pc to record any phone call.
Im hoping there is somthing i missed and some1 knows of some software out there that can do this without having to put it in speaker phone mode.

No. You don't miss anything. None of them is available, yet.
Actually, you've just missed to list Resco Audio Recorder v4.x.x. as well. I was shocked that you've asked this question (due to your experience with PPC, from 8125 to 8925.)

Help using bluetooth headset with xperia x1

Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.

thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.

actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?

now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?

no one can help me with this? not any tip or a way to select a different output for audio or anything like that?

Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards

i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.