Guys,
I have tried to install PHM Registry Editor, i used the desktop installer and that did not work. Can someone please point me to the correct cab file i need to use for wm6.
Thank you.
http://www.techspot.com/downloads/301-total-commander.html
registry will be in //
(last i recalled)
I use this one. Just unzip to PC desktop and run it form there (with device synced):
Thanks guys
I tried commander it did not work.Is this for PC or pocket pc. Could not find the registry editor in there lots of other crap but no registry editior. It also says I can have lan access I can not find anywhere where I can access file sittin on LAN.
Can you throw a few pointers.
Mobile registry, I have to use a pc to edit. Not very convenient as I dont have my pc with me all the time.
Is there anything else outthere.
Here ya go...
This is cooked into several of the ROMs out there but I find it very handy.
copy the TaskMgr.exe to your /Windows folder on the Tilt/Kaiser
Copy the shortcuts to /Windows/Start Menu/Programs/* (somewhere in here)
Hope this helps.
jamunaji said:
Thanks guys
I tried commander it did not work.
Click to expand...
Click to collapse
Hi, TotalCommander is PPC software. By using it you will find a folder \\ in root. There are 3 folders in \\: ftp, LAN and registry.
Hans Olo
sirsycho said:
Here ya go...
This is cooked into several of the ROMs out there but I find it very handy.
copy the TaskMgr.exe to your /Windows folder on the Tilt/Kaiser
Copy the shortcuts to /Windows/Start Menu/Programs/* (somewhere in here)
Hope this helps.
Click to expand...
Click to collapse
Thanks. Just what I was after.
Third said:
I use this one. Just unzip to PC desktop and run it form there (with device synced):
Click to expand...
Click to collapse
this is cool and very easy to use.
Related
please help me
how i configure that the folder my documents will be store at my storage card.
thanks
Don't think there's a way to configure the location of the default "my documents" folder location. If you want to save files to card, you have to manually select the destination folder.
For those ancient apps that don't offer a folder dialogue for you to choose from, I vaguely remember that replacement DLL that you could use to replace the standard save dialog to include folder selection. But I don't recall it's name now.
shareyal said:
please help me
how i configure that the folder my documents will be store at my storage card.
thanks
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\System \Explorer\Shell Folders
"My Documents"="\Storage Card\My Documents"
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
"FileSyncPath"="\\Storage Card\\My Documents"
Ciao
claros said:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
"FileSyncPath"="\\Storage Card\\My Documents"
Ciao
Click to expand...
Click to collapse
can you be more specific
do i have to go to the registry and change it like you write to me?
in wich program i can connect to the registry
thanks
total commander can change registry
but i suspect he mean pc registry in which case
you click start and pick run
and type in regedit and click ok
shareyal said:
can you be more specific
do i have to go to the registry and change it like you write to me?
in wich program i can connect to the registry
thanks
Click to expand...
Click to collapse
Forget it, it was on old trick I wrote very fast... but it doesn't work on my trinity....
PS:
Ok. On my trinity WM6 the following trick works:
You need something like Total Commander CE, PHM Registry Editor or any other tool to modify registry. Be careful.
Change
HKCU\Software\Microsoft\File Explorer\LocalPath
in
\Storage Card\My Documents
This affect just any file explorer window
Ciao
claros said:
Forget it, it was on old trick I wrote very fast... but it doesn't work on my trinity....
PS:
Ok. On my trinity WM6 the following trick works:
You need something like Total Commander CE, PHM Registry Editor or any other tool to modify registry. Be careful.
Change
HKCU\Software\Microsoft\File Explorer\LocalPath
in
\Storage Card\My Documents
This affect just any file explorer window
Ciao
Click to expand...
Click to collapse
... and Active Sync will still Sync only the My Documents Folder on your device, which makes the whole registry editing useless...
saminegm said:
... and Active Sync will still Sync only the My Documents Folder on your device, which makes the whole registry editing useless...
Click to expand...
Click to collapse
I haven't tried (reflashed yesterday) but that setting (in HKCU) change only the initial directory of explorer, so it should have any effect on active sync.
The setting in HKLM seem to have no effect, so there is no need to change the active sync folder...
PS: I'm wrong, yesterday my active sync backup worked so I've tried...
Ciao
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
logger said:
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
Click to expand...
Click to collapse
Install FdcSoft's Taskmanager (it has a built in Regedit), by DotFred. In there you can associate .reg files with it. Then just run them to import.
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
logger said:
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
Click to expand...
Click to collapse
Dont worry. I spent 10 minutes trying to use PHM before I gave up.
Dot Fred's TaskManager is a kick ass task manager as well as a reg editor (amongst other stuff).
P.S. Easiest way to associate is: Open TaskMgr, tools, options, Create RegEit Shortcut. This will ask do you want to associate.
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
logger said:
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
Click to expand...
Click to collapse
Don't know. I just leave the exe in My Docs, and run it from the shortcuts.
Okay. Will do same. thanks..
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
this is the steps i usually take when entering in a reg file. I use resco explorer for all this. I double click. Then I make sure I close resco through the menu exit and not the X button. Then I continue to play around with my phone for a while opening up menus and stuff. Then I soft reset. Doing these steps, I for sure get my stuff to work. There might be some unnecessary steps I take, but I end up with what I want. Many people have trouble keeping their registry stuff to stick. The steps I take, I never worry about that.
GSLEON3 said:
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
Click to expand...
Click to collapse
Thanks for the tip. Was not aware you could make shortcuts this way. Running from the card appeals because the .exe will still be there after reflashing a new ROM and I will only need to move/copy the shortcut. Being a newb I have been somewhat reluctant to run apps from the card but I am gathering that is is a quite an acceptable thing to do.
Is there a way to place registry keys inside a CAB so that they will get imported when the CAB is launched? Whilst the above DotFred association method works a treat for me with ".reg" files I would like to find a standalone method to import registry info. So that I can pass a single file to someone else and without any extra config they can import the contents into their registy.
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
thomassster said:
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
Click to expand...
Click to collapse
Thanks for the link thomasster. Does the job well. Probaly an overkill (and therefore overpriced for what I need), but I got it to work OK. Also from using it, I learnt that the process simply converts the registry keys to provxml. So now I am looking to manaully create the "_setup.xml" and then use iexpress.exe in Vista to create the CABs.
Is there a way to undo changes made by import .reg file?
I imported a reg file using DotFredd's Taskmanager. Now I want to undo it? Is it possible? How?
Thanks
I have just purchased an HX4700 and downloaded a WM6 rom....there are some very talented people out there. I have searched the web for any other rom to get the 'transcriber' functionality back but am not having any luck. I apologise if there is already an entry about this however I have not found it.
I did down a CAB file and copied to my pda, clicked on the setup...got a screen like html text, did a soft reset but nothing changed. It was called MS_transcriber. Any help would be very much appreciated.
Read this and this.
Download.
Thankyou CWKJ for the help.....excuse my ignorance but I'm not sure where to go with the info in the other threads.
I am running wm6.1. I extracted the 'Input Method Fix' and copied the files to my PDA. I then double clicked on the '_setup.xml' file and a list of text like html ran. I then did a soft reset of the device but the transcriber functionality is not listed as a input option.
Do I need to physically alter the registry file and if so how? I have done it on a PC many times but not a PDA.
thankyou for your patience.
By installing the cab, the registry should be correct.
There are tools like TotalCommander (freeware, google and you will find) which I use can help read registry, but do not try to meddle registry for new comers.
For both Recognizers, check if msim.dll is in \windows\ directory.
For Transcriber, check if TranscriberSip.dll is in \windows\ directory.
Using file explorer to check the files may not work as the files may by hidden. If you cannot find them, use TotalCommander as file explorer to check.
If it is not there, I will send them to you, and you just need to copy them into \windows\ directory.
I downloaded total commander. Ran a search for the "TranscriberSip.dll" file however could not find it.
I would appreciate it if you could send it to me thanks.
Shane
.....I had changed the preferences to look for hidden files as I did find the "msim.dll".....still need the "TranscriberSip.dll" from you if you could assist.
Tks, Shane
27/5/08: Disregard my last as I have solved the Transcriber issue. Was a *.cab install issue.
Tks again for the help.
hey is it possible to create folder on the menu in a win 6.5???? i havea lot of programs and i want to put them in one folder...so can i do this???
astrit_arsllani said:
hey is it possible to create folder on the menu in a win 6.5???? i havea lot of programs and i want to put them in one folder...so can i do this???
Click to expand...
Click to collapse
create it/them
e.g. in tc go to \Windows\Start Menu\ and create the new folder/folders/sub-folders as you need them, then create *.lnk files of your progs in it/them
ok...thnx...it works.....thnx....
how can i create a .lnk file?
JoLLAJoLLA said:
how can i create a .lnk file?
Click to expand...
Click to collapse
use tc
highlight the e.g. *.exe (don't open it!)
navigate File (menu) - >>>>> Create Shortcut, with Tree navigate to target folder, confirm with OK, done
cheers
JoLLAJoLLA said:
how can i create a .lnk file?
Click to expand...
Click to collapse
What he means by that is that you need to create a shortcut. As simple as that.
is there any way i can do this on the computer? i did active sync but it doesn't show the windows folder.
wildseal2003 said:
is there any way i can do this on the computer? i did active sync but it doesn't show the windows folder.
Click to expand...
Click to collapse
it absolutely does
I have to translate to English, but in your Explorer it should be like:
Mobile Device - My windows mobile-based device - Windows ...
that doesnt show all the files though
wildseal2003 said:
that doesnt show all the files though
Click to expand...
Click to collapse
sure?
can you pls add an example? after a very quick see-through I'm inclined to disagree
maybe you should check the following setting in your windows explorer:
Tools - Folder Options... - View (tab) - Files and Folders - Display xxx... option settings, maybe something required is unchecked there
total commander the pc version
got a free plugin called [WinCE device]
it let you browse the pda enter all dirs
and see all files
im using total commander now like you said and it works fine i can see all the files. the only problem is i cant move any of them. it just gives me download error
Rudegar said:
total commander the pc version
got a free plugin called [WinCE device]
it let you browse the pda enter all dirs
and see all files
Click to expand...
Click to collapse
great hint, thx for that, working, though I couldn't create a new shortcut with it, added cmd to Button Bar but all it does is move the file
unintentionally, I uninstalled 'onenote' on my tytn II pro
how do I reinstall it?
thanks
_____________________________________
involontariamente, ho disinstallato 'onenote'
come faccio a reinstallarlo?
the cab is somewhere in the dirs of the normal onenote install on your pc
What is a Tytn II pro?
Rudegar said:
the cab is somewhere in the dirs of the normal onenote install on your pc
Click to expand...
Click to collapse
I searched and found many . cab
Perhaps this is "18290_1_MP_ttn_6_032_8351_HTCITA_Kaiser.cab" in the "C: \ Program Files \ Microsoft ActiveSync \ HTC Apps?"
What should I do?
thanks
ChumleyEX said:
What is a Tytn II pro?
Click to expand...
Click to collapse
I believe that both the operating system Win Mobile 6 Professional
hi,
can anyone tell me where to download the file. cab 'onenote'?
or send the file. cab 'onenote?
thank
How did you delete it ? If it was part of your original stock rom, just hard reset. Or , with file explorer, find it in your /windows file and re-install it.
I don't think that you are going to find it in a .cab file, since it was included as part of Office 2010.
denco7 said:
How did you delete it ? If it was part of your original stock rom, just hard reset. Or , with file explorer, find it in your /windows file and re-install it.
I don't think that you are going to find it in a .cab file, since it was included as part of Office 2010.
Click to expand...
Click to collapse
hi,
I'm not sure you uninstall the file, I think I uninstalled because I do not appear anymore in the start menu and can not find the file. exe
office? the version that I found on the TyTN is the 2007
I now look dim in the original installation disks
many thanks
From your desktop OneNote: Tools>Options, select "OneNote Mobile" from the list on the left. There will be a button to install on your mobile device.
hard reset and a backup
i had trouble also with backup
many thank anyway