Data Connection in Conn Manager - Tilt, TyTN II, MDA Vario III General

Hi guys
I installed the Q-Mobile 1.1 ROM on my TYTN II and configured it. At one moment the Data Connection disappeared from the Comm Manager so I don't have the option to manually disconnect it any more. Can you tell me what setting I have to change to fix that?
Thanks.

look for Schaps Advanced Config 1.0.cab this tool is awesome you could change the icons on Comm Manager to suite your needs or use the HTC Endkey.cab it has the option to manually data disconnect.
Pic One Comm Manager Modified w/Schaps Pic Two Endkey
I'm sorry I don't have the direct links for these cabs....

Thanks, great!

Related

Wireless Modem->Internet Sharing switch for Tilt?

Does anyone know a cab or reg mod that will switch the Wireless Modem for the Internet Sharing program in the Comm Manager on the AT&T Tilt? When loading the Kaiser Comm Managers the Wireless Modem name and link still apply on the Tilt.
Thanks

underclock a kaiser?

Hello all,
My company just "upgraded mwy wizard for a kaiser (tilt) anyways i used to use battery status to underclock my phone when not in use to extend the battery time......
i know it's a different processor but is there a program to do this yet?
You don't need to do that, Kaiser underclocks itself automatically when idle.
Also switch to GSM mode from 3G mode, it saves A LOT.
And what way do you turn off the 3G then?
MM
MaxMotus said:
And what way do you turn off the 3G then?
MM
Click to expand...
Click to collapse
Start Menu -> Settings -> Personal -> Phone -> select Band TAB -> Select your network type from Auto to GSM
thanks I appreciate it
gabriel31337 said:
Start Menu -> Settings -> Personal -> Phone -> select Band TAB -> Select your network type from Auto to GSM
Click to expand...
Click to collapse
I don't see an Auto or GSM
gabriel31337 said:
Start Menu -> Settings -> Personal -> Phone -> select Band TAB -> Select your network type from Auto to GSM
Click to expand...
Click to collapse
Another way is to find Schap's comm manager, its allows you to quickly turn off 3G and on. I can't remember is Dutty's comm mananger had one, I believe so.
Turning off Beam, and Bluetooth OBEX (if you don't use it) saves battery life also.
Well since it's a company phone, get permission from your boss to see if you can change the rom. Cooked rom's battery life has a dramatic difference to a stock rom. Dutty's upcoming v4 rom is suppose to greatly improve battery life, and speed. I used Schap 4.31 the radio is my signature, battery last me pretty long. Introduce the rom flashing concept to your boss to see what he has to say.
we3zy said:
Another way is to find Schap's comm manager, its allows you to quickly turn off 3G and on. I can't remember is Dutty's comm mananger had one, I believe so.
Turning off Beam, and Bluetooth OBEX (if you don't use it) saves battery life also.
Well since it's a company phone, get permission from your boss to see if you can change the rom. Cooked rom's battery life has a dramatic difference to a stock rom. Dutty's upcoming v4 rom is suppose to greatly improve battery life, and speed. I used Schap 4.31 the radio is my signature, battery last me pretty long. Introduce the rom flashing concept to your boss to see what he has to say.
Click to expand...
Click to collapse
I have the TILT, and I don't see the option to switch from 3G to GSM. Is schap's comm manager the only way I can do this? Is there an option in KaiserTweaks?
SlimJ87D said:
I have the TILT, and I don't see the option to switch from 3G to GSM. Is schap's comm manager the only way I can do this? Is there an option in KaiserTweaks?
Click to expand...
Click to collapse
Yes, hey look into Schap's new Advance Config 2.0, it's has a Comm Manager tweak section, which allows you to add that option.
But you should really look into it, do a search, because I am not really sure if it works with your Comm Manager. And you should turn HSPDA off also, if you can't use it.
we3zy said:
Yes, hey look into Schap's new Advance Config 2.0, it's has a Comm Manager tweak section, which allows you to add that option.
But you should really look into it, do a search, because I am not really sure if it works with your Comm Manager. And you should turn HSPDA off also, if you can't use it.
Click to expand...
Click to collapse
I downloaded this one.
http://www.cinetsystems.com/xda/Kaiser Cab Collections/duttythroy 3g comm manager (working).cab
It's Dutty's. I installed it. Are there any other ones? This one works fine, but there are no pictures or anything, it's not very user friendly.
SlimJ87D said:
I downloaded this one.
http://www.cinetsystems.com/xda/Kaiser Cab Collections/duttythroy 3g comm manager (working).cab
It's Dutty's. I installed it. Are there any other ones? This one works fine, but there are no pictures or anything, it's not very user friendly.
Click to expand...
Click to collapse
Well first off which rom are you running?
Here's a link for Comm Manager 2.0.0.0 which Schap's used in his rom:
http://forum.xda-developers.com/showthread.php?t=360903&highlight=Comm+Manager+2.0.0.0
ok, now I don't have a comm manager and I have all these problems now...
I had to download Kaiser Comm manager to fix my problem...
now i'm scared, can someone walk me through on how to back up my phone and it's settings?
SlimJ87D said:
ok, now I don't have a comm manager and I have all these problems now...
I had to download Kaiser Comm manager to fix my problem...
now i'm scared, can someone walk me through on how to back up my phone and it's settings?
Click to expand...
Click to collapse
Well, earlier I suggested that you read through the post, and do searches. Your installing cabs, before understanding them. That's why I ask first of what's your rom.
i'm just running a stock ROM on my tilt.
How do I back up my phone so if something happens I can revert back.
Well you can't actually revert back unless in might be in your add/remove programs or you hard reset.
Now under your band tab, you don't see:
Select Your Network Type:
Auto
>GSM
WCDMA
...at all?
It's a stock ROM...Play with all the cabs you want! You'll probably have to hard reset, but then you just have to start over again from the stock ROM. The only thing that sometimes can't be undone revolves around flashing/unlocking.
& if you use sprite backup, which came on the device, you can indeed "revert" back to where you were before some cab f'd you up.
GSLEON3 said:
if you use sprite backup, which came on the device, you can indeed "revert" back to where you were before some cab f'd you up.
Click to expand...
Click to collapse
That too...i forgot

Who has Dutty Comm Manager 6Bott?

Hi folks!!!
I´ve installed the last ROM from Dutty (Dutty´s Hybrid V2) but i´d like that my comm manager could be in 6 Bottons:
Phone
Bluetooth
Internet Sharing
Wi-Fi
3G
Data (instead Microsoft direct push)
I need data bottom to turn off my connection
Does anyone has this cab or any solution?
Denis Costa
I have it
But if you search for it so can you
I´ve looking for a long time but i just found comm manager with 10bottons version
as standard on most of his ROMs it includes an app called advanced config run this and it has the option to change to 6 button if you select it. i believe its on the settings softkey under comm manger
hope this helps

Comm Manager Tab for Flow 3D ?

Hi,
I'm searching for a working Comm Manager Tab for Flow 3D. I found a few in the Diamond forum but non of them works on my Touch Pro.
Any ideas?
Thank you
here it is :
http://www.speedyshare.com/581204121.html
it's the Comm Manager + Call History and Calendar in one Cab File!! just that easy if you dont want the rest disable it with Diamond TF3D Config or something like that
rohithathie said:
here it is :
http://www.speedyshare.com/581204121.html
it's the Comm Manager + Call History and Calendar in one Cab File!! just that easy if you dont want the rest disable it with Diamond TF3D Config or something like that
Click to expand...
Click to collapse
thanks for the cab file
Comm Mgr Tab
Is there a .cab file with JUST the comm mgr? i don't really need all the xtra stuff...
Install Advance Config 3.3 by Schaps and remove what ever is not needed.
And Volia!
Hi,
the comm manager is working great. But the calendar is showing IDS_CALENDAR_... everywhere? How to fix this?
Thanks
serphinox said:
Install Advance Config 3.3 by Schaps and remove what ever is not needed.
And Volia!
Click to expand...
Click to collapse
Thanks a million!
Clock disappears
Hello. I installed this program, and after the reset the clock does not show. The additional tabs are there, but the flip clock disappears. Any sugestions woul be greatly appreciated. Thank you.
I have a strange problem installing this cab.
After installing I need to soft-reset, done that and after that te TF3D menu shows the extra tabs, exactly as it should be.
But after changing the tabs in advanced config (I only need home - messages - programs - weather - comm. manager), advanced config will be minimised and my changes are made, except for the extra icon for comm. manager.
When I enter advanced config again, the extra tabs (calendar, comm. manager, etc.) are gone.
Anyone with the same problem?
how well does this work with att tf3d? i have call history and it works really well but when i last tried to do calendar tab it was horrible. i really want a comm manager tab too more than anything else but i wont complain if the extras work too.
i installed it on my fuze and its not horrible. the text color is wrong though. how do i change it from white to black so i can see it on my snowy white background?
I install the .CAB, but have a problem - with my ROM have a Call tab who I disable by DTF3DConfig, but now with this .cab I get one more Call tab and can`t disable the 2nd. How to fix the problem with Advanced Config? Can anybody "cut" the .cab and make him to install only Comm Manager tab(this is the most importan for me)?
Cheers!
It is not the stock Comm Manager
My stock AT&T Fuze Comm Manager has a Data and 3G tab while this replacement one only has Microsoft Push whatever that is. I can still run the original CM in Connections and I can also select the tabs I want but the selection are ignored by the custom Comm Manager.
How does one edit what is run for each Tab? I would like to run the original Comm Manager and replace the Weather Tab with SPB Weather which looks great on an all black themed Fuze.
yeah i wanna change out the microsoft push to data connection too. i also want to change the text color too so i can see it on my phone. if anyone knows how. pweez?
Hello
Sombody have got write link to this cab?
Bad-i said:
Hello
Sombody have got write link to this cab?
Click to expand...
Click to collapse
here ya go..
http://forum.xda-developers.com/showpost.php?p=2943363&postcount=172

Tilt Comm Manager corrupted issue

Hi,
I tried to install HTC 10 button Comm Mgr listed in XDA and it said, it has successfully installed but after restart when I check my Comm Manager it got wiped out...It just shows up Blank (Black checked boxes) screen...
Then I have un-installed the installed COMM Mgr but I was not able to get back my old Comm Mgr (Still Blank page is visible)....
Please help.... Its very difficult for me work with Tilt without Comm Mgr...
Expecting a quicker reply, if possible email me at [email protected]om
Thanks,
Raaam
raaam123 said:
Hi,
I tried to install HTC 10 button Comm Mgr listed in XDA and it said, it has successfully installed but after restart when I check my Comm Manager it got wiped out...It just shows up Blank (Black checked boxes) screen...
Then I have un-installed the installed COMM Mgr but I was not able to get back my old Comm Mgr (Still Blank page is visible)....
Please help.... Its very difficult for me work with Tilt without Comm Mgr...
Expecting a quicker reply, if possible email me at [email protected]
Thanks,
Raaam
Click to expand...
Click to collapse
Try running this first, and then loading your new comm, mngr.
http://www.4shared.com/file/82200524/6bd84d92/Kill_CommMgr.html

Categories

Resources