Anyone know of a utility that will hang up kaiser phone calls at a pre-set call duration. I had a symbian app for my Nokia n73 that could be set to chop calls at 9min 55 sec. This was perfect for keeping my 3 "30cent for 10 minute calls" from turning into $10 for 10min 01 sec calls. I have a call plan where calls less than 10 minutes are really cheap, but if I go over by a second they suddenly get really very Exy
Related
Hi all,
Running my Orange UK (unlocked and on T-mobile) with Duttys 6.1 ROM and radio 1.64.08.21 and seem to have an issue when answering incoming calls.
I'm sure I've seen this reported elsewhere but can't find it for the life of me now!
When I recieve an incoming call and press the green answer button, there is about a 2 second delay before the call is connected. If you're not quick, TM voicemail takes the call. Seems to be a second of ringing on the calling handset before it starts ringing on the TYTN 2 as well.
Can someone confirm that I have seen this reported elsewhere and post a link or suggest if this is a ROM issue, radio issue or general Kaiser issue?
Only kept the orange rom for about 48 hours and went straight to Duttys so cant really recall if it happened on the orange rom.
Many thanks guys!
Not exactly the same problem, but I have a similar issue on my Tilt with my bluetooth headset. I press the headset button to answer and don't hear anything for about 1.5 seconds. Usually, the person calling is saying "hello? hello?" by the time I actually get connected.
The headset (Plantronics 510) works great for everything else.
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Same problem here as well! Same Rom (Dutty's), same network (Orange).
And I've only flashed last week and was on the standard Orange Rom before and there wasn't a delay. Any help is appreciated as this is a right pain.
I've changed to 30 seconds before diverting to the answerphone - so thanks for that response at least.
PsyOpWarlord said:
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Click to expand...
Click to collapse
Had no idea that screen was there... Thanks! I've changed my call forward to 25 seconds, 'cause I had always felt it was going to vms too quickly.
Gavin
I had this issue myself with Dutty's V4 RTM (WM 6.0) rom. Pressing the Green button would result in a 2 second delay in being able to answer the phone, but if I used the left soft key to answer, there was no delay.
Same problem here. T-Mobile vanilla ROM. Can take up to 5 seconds for the call to reach my earpiece.
Solved it!
I had seen elsewhere that turning off the kepad sounds and turning off smart dialing could help, but I can't find a smart dialing option in the phone options.
Just tried switching the the Windows dialler rather than HTC and turning off auto Audio record on the Resco recorder which I had forgotten about.
After bit of playing, it appears (quite obviously now) to be the Audio recorder!
Used to use this on my wizard without any notable problems, but seems to be an issue on the Kaiser. It answers and hangs up in an instant now
A bit specific, but if any of you guys have this kind of thing installled and configured, try turning it off?!
Thanks for the replies and suggestions and hope you get it sorted too!
I don't have Resco audio installed and it only happens occasionally but when it does it usually happens a few times in a row.
Sometimes I also get the ringtone coming through the BT headset while the kaiser sputters into life. Then a 2 second delay
before the BT headset beeps and the caller can hear me.
Occasionally, I can hear the caller at the same time as I can hear the ringtone. Just another 'feature' I guess.
"If you're not quick, TM voicemail takes the call"
There's usually a few seconds delay between 'hearing' the other phone ring and it actually ringing. Can be up to 5 seconds.
some default ring tones are timed 3+ seconds apart. Choose the wrong ring tone and ring tone type (increasing volume) and
it's possible to miss the first 2 rings which, if the answer after x seconds delay is set to 20 seconds gives someone about
5 seconds to answer the phone or miss the call. My GF suffered 'missed call syndrome' after fiddling with her Hermes.
You can adjust the voice mail answer after x seconds time in start/settings/phone/services/call forwarding/get settings
Forward calls only if [no answer should be ticked]
Drop down menu Forward after ..
Mine is set to 30 seconds.
Hey all...I probalby should know this as I have uses a PPC device for 2 years...but I don't remember having this issue on my last phone.
When I am on a call and get another coming in it consistently beeps/rings for the call waiting.
I have set my phone up to wait 30 seconds before going to voicemail (as I am not always around the phone). Because of this if I am in the middle of a conversation and get another call, I can't hear the other party (and am distracted myself) because my phone keeps ringing the other line for 30 seconds until the call is rejected.
When using MS Voice Command, I get the same thing with incoming announcements. If I am on the phone with Caller A and then Caller B calls, MSVC keeps saying "Incoming Call from Caller B."
I don't want to turn off Call Waiting, but I would like to change the notification so it is only a beep or something simple every 5-10 seconds and not a continuous ringing or talking.
Is the caller ID ring/tone able to be managed differently from the ring tone/announcement? What is the best way to manage this?
thanks
bumping to see if anyone has advice?
I have Same Problem With BlackStone and this annoying me so much
Any advice ?
PhoneAlarm has a setting to Vibrate for alerts while in a call.
It won't loop and will only play for 30 seconds and I miss all my calls.
T-Mobile was clueless talked to G1 support team.
need more info because it sounds like you made a ringtone that is more than 30 secs and you expect your phone to ring longer than 30 secs before going to voicemail.
Fingerlickin said:
need more info because it sounds like you made a ringtone that is more than 30 secs and you expect your phone to ring longer than 30 secs before going to voicemail.
Click to expand...
Click to collapse
Agree with fingerlickin.
goto your dialer and dial *#61# and press send.
This will tell you the voicemail number and delay before forwarding.
yeah most phones are set up to ring between 20-30 seconds before it gets forwarded to voicemail. it isnt because your ringtone doesnt repeat, it was your voicemail box that's programmed to send calls to voicemail after 30 seconds or so. 30 second should be the max, if it goes over it might be considered extra minutes and you will be charge or minutes will be deducted from ya plan. you can remove voicemail forwarding and just have the phone ring forever if you want.
but here is some directions to check and change length before it is forward.
1. On your phone, dial *#61# and click Send.
2. Some information should be displayed: number that the calls are being forwarded to and the delay before the forwarding engages.
3. Write down the number (including +1)
4. Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum
5. Dial *#61# to verify that the new settings are active.
My wife has a Touch Diamond 2 with original stock ROM from about a year ago. She has a recurring problem with incoming calls stopping ringing after 3 rings - meaning that she misses virtually all of her calls. A quick test reveals that the caller continues to hear the phone ringing after my wife's phone stops ringing.
She has Call Forwarding (in Network service settings) set to divert calls after 30 seconds, although this seems to reset itself to 15 seconds every time she reboots the phone (??).
She's in the Asda Mobile network in the UK (which I believe is based on Vodafone).
Has anyone else had this issue?
I think all of us(married males)face this problem i e ,our voice is gone when our wives appear.
The issue is your forward settings.
Bruce Inman said:
The issue is your forward settings.
Click to expand...
Click to collapse
The forward settings are to forward to voicemail after 30 seconds.
???
If you take those setting off, it will roll to Vmail in 4 rings or whatever your carrier sets it to.
The 30 secs is interferring and causing it to roll after 3.
Bruce Inman said:
If you take those setting off, it will roll to Vmail in 4 rings or whatever your carrier sets it to.
The 30 secs is interferring and causing it to roll after 3.
Click to expand...
Click to collapse
You are you saying that the 30 sec setting is effectively meaningless/useless, and that she only has the choice between 3 and 4 rings? (which is usually too short, as she never has the phone near enough to answer it that quickly!)
itm said:
You are you saying that the 30 sec setting is effectively meaningless/useless, and that she only has the choice between 3 and 4 rings? (which is usually too short, as she never has the phone near enough to answer it that quickly!)
Click to expand...
Click to collapse
Basically yes.
You can contact your provided and I think they can configure it from their end to set for more rings. There is no way to control this from the phone.
If you are in the US, you can use Google Voice. If she sets it up to forward to her cell, it will give more time to answer.
Hello,
My Nexus6 Rings and Vibrates when someone calls for the first time. But only vibrates when the same person calls for the second time. From the second time onwards it doesn't rings, but only Vibrates.. If I delete the history of that particular incoming call from the Recents, then it will start ringing. Please let me know how can make the phone ringing all the time.
Thanks.
An update to this issue is:
When a call arrives multiple times with in 2 minutes, the phone gives a ringing sound for all the attempts. After 2 minutes of last attempt, the phone goes to a muted mode (only vibrates). The muted mode continues for the next 10 minutes. After 10 minutes, if a call arrives from the same number, the phone rings.
Is this a standard behavior in Android phones ? Or is there a setting to make the phone ringing all the time ?