Database Develop

[ROM-FIX] CM-6.1 Nightly - Signal Bar Policy Tweak [UPDATED: 10/03/10]

[highlight]THIS IS COSMETIC ONLY. IT HAS NO EFFECT ON ACTUAL DBM [/highlight]
Description: This tweak makes a cosmetic adjustment to the way the signal bars are displayed. The threshold limits have been modified to make the appearance of slightly better signal strength. Again this is cosmetic only and is subtle. See below.
It is based off the CDMA limits and affects signal only when EVDO is present. I believe that HTC used some similar discretion in their more recent updates to give the appearance of better signal strength but I can not confirm this.
I will update this when needed as changes to services.jar on CM6 builds is likely. I will not be modifying this to fit any users requests for different limit threshold values.
Requirements:[highlight]
Latest CM6 Nightly (un-themed) + ClockworkMod Recovery[/highlight]
Instructions:[highlight]
Flash .zip in recovery[/highlight]
Disclaimer:[highlight]
I am not responsible for any issues with your phones relating to this tweak. Applying the .zip should be done at your own risk. Please make a backup prior to flashing.[/highlight]
I have made the following tweak to the StatusBarPolica.java limits for CM6 Nightly builds (CM6.1)
Original:
Code:
private int getEvdoLevel() {
int evdoDbm = mSignalStrength.getEvdoDbm();
int evdoSnr = mSignalStrength.getEvdoSnr();
int levelEvdoDbm = 0;
int levelEvdoSnr = 0;
if (evdoDbm >= -65) levelEvdoDbm = 4;
else if (evdoDbm >= -75) levelEvdoDbm = 3;
else if (evdoDbm >= -90) levelEvdoDbm = 2;
else if (evdoDbm >= -105) levelEvdoDbm = 1;
else levelEvdoDbm = 0;
if (evdoSnr >= 7) levelEvdoSnr = 4;
else if (evdoSnr >= 5) levelEvdoSnr = 3;
else if (evdoSnr >= 3) levelEvdoSnr = 2;
else if (evdoSnr >= 1) levelEvdoSnr = 1;
else levelEvdoSnr = 0;
return (levelEvdoDbm < levelEvdoSnr) ? levelEvdoDbm : levelEvdoSnr;
}
New:
Code:
private int getEvdoLevel() {
int evdoDbm = mSignalStrength.getEvdoDbm();
int evdoSnr = mSignalStrength.getEvdoSnr();
int levelEvdoDbm = 0;
int levelEvdoSnr = 0;
if (evdoDbm >= [highlight]-75[/highlight]) levelEvdoDbm = 4;
else if (evdoDbm >= [highlight]-85[/highlight]) levelEvdoDbm = 3;
else if (evdoDbm >= [highlight]-95[/highlight]) levelEvdoDbm = 2;
else if (evdoDbm >= -105) levelEvdoDbm = 1;
else levelEvdoDbm = 0;
if (evdoSnr >= 7) levelEvdoSnr = 4;
else if (evdoSnr >= 5) levelEvdoSnr = 3;
else if (evdoSnr >= 3) levelEvdoSnr = 2;
else if (evdoSnr >= 1) levelEvdoSnr = 1;
else levelEvdoSnr = 0;
return (levelEvdoDbm < levelEvdoSnr) ? levelEvdoDbm : levelEvdoSnr;
}
If this isn't working for you please let me know. It appears to be working for me, but again it is subtle and takes some death grip holding to get fluctuations enough to see the thresholds in action.
ENJOY!!

I'm using the official froyo radio and I see no difference in my bars. I used your other fix when I was on 6.0.2 and I did see a difference. Not sure why this isn't working?
Edit: if I am looking at the change right, then at -84 dbm I should have 3 bars. I flashed the file and only have 2 bars. Another thing I noticed, -74 dbm and only one bar showing.
Sent from my INCREDIBLE using Tapatalk

Double post

interesting. i just checked i was at -94 dbm and showed 2 bars which would have normally shown 1 bar. it seems to be working for me. it is not an instant refresh however and never has been as far as i can tell so sometimes there will be a discrepancy. once it settles down it should be correct. i will adjust if this is not working for others.
thanks
edit. i guess the easiest way to tell if it works is if you are getting full bars in the low -70's dbm

I think if you added +5 to each of the values it would be on par with how other phones show reception.
Sent from my INCREDIBLE using Tapatalk

Does this work with all AOSP roms?
Sent from my personal space

ncwildcat said:
Does this work with all AOSP roms?
Sent from my personal space
Click to expand...
Click to collapse
Only on CM6.1.

Seems like this fix works off and on. Sometimes it's accurate and others it is not. Not sure what is causing this.

I'm on Build#100 of CM6 and its reporting -63 and I only see 3 bars. I watched the signal report for the last minute and it hasn't fluctuated at all, but never once did I see a full 4 bars. Strange

itch808 said:
I'm on Build#100 of CM6 and its reporting -63 and I only see 3 bars. I watched the signal report for the last minute and it hasn't fluctuated at all, but never once did I see a full 4 bars. Strange
Click to expand...
Click to collapse
Well -63 would have been 4 bars on the old services.jar anyway so not sure whats going on there.
Just to help me sleep better at night i am attaching a screenshot of my phone @ -74dbm showing 4 bars.

ghostrida said:
Well -63 would have been 4 bars on the old services.jar anyway so not sure whats going on there.
Just to help me sleep better at night i am attaching a screenshot of my phone @ -74dbm showing 4 bars.
Click to expand...
Click to collapse
The fix works..... when it wants to. Sometimes the bars are spot on and other times I have no clue what they are doing.
Sent from my INCREDIBLE using Tapatalk

Now my phone is just looping!
I just flashed it from the SD Card
G1 CM 6.1
and now my phone is just looping through the intro screen.

Calling an alarm after DispatcherTimer reaches 0

I'm developing an app with a count down time and I'm looking for a way to tie into the built in alarm sounds, or at least a way to set one programmatically,
Anyone ideas?
I'm using the DispatcherTimer for counting ticks.
Example code below:
Code:
if (remaining.TotalSeconds <= 0)
{
this._dispatcherTimer.Stop();
// Alarm callingmethod goes here
}

dispatcherTimer = new System.Windows.Threading.DispatcherTimer();
dispatcherTimer.Tick += new EventHandler(dispatcherTimer_Tick);
dispatcherTimer.Interval = new TimeSpan(0,0,1);
dispatcherTimer.Start();
// System.Windows.Threading.DispatcherTimer.Tick handler
//
// Updates the current seconds display and calls
// InvalidateRequerySuggested on the CommandManager to force
// the Command to raise the CanExecuteChanged event.
private void dispatcherTimer_Tick(object sender, EventArgs e)
{
dispatcherTimer.Stop();
// Call alarm here
}

No, I need to know how to call the alarm sound. The example I showed was how it was going to be called.
The app is completed, except for this little extra I would like to add.

Code:
var alarm = new Alarm(name);
alarm.Content = content;
alarm.Sound = new Uri("/Ringtones/Ring01.wma", UriKind.Relative);
alarm.BeginTime = beginTime;
alarm.ExpirationTime = expirationTime;
alarm.RecurrenceType = RecurrenceInterval.None;
ScheduledActionService.Add(alarm);

Useless guy said:
Code:
var alarm = new Alarm(name);
alarm.Content = content;
alarm.Sound = new Uri("/Ringtones/Ring01.wma", UriKind.Relative);
alarm.BeginTime = beginTime;
alarm.ExpirationTime = expirationTime;
alarm.RecurrenceType = RecurrenceInterval.None;
ScheduledActionService.Add(alarm);
Click to expand...
Click to collapse
I'll let you know how it works ... thanks.

Working with notifications

Hi, I have code below to create a notification, but after click on any button, NotificationActivity does not start, any ideas?
Java:
Context parent =AndroidAppHelper.currentApplication();
// Enable
Intent allow = new Intent(parent, NotificationActivity.class);
allow.putExtra("AppName", Appname);
allow.putExtra("Option", "ALLOW");
allow.addFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP | Intent.FLAG_ACTIVITY_CLEAR_TOP);
PendingIntent pendingAllow = PendingIntent.getBroadcast(parent, 0, allow, 0);
NotificationCompat.Action allowAct = new NotificationCompat.Action(0, "Allow", pendingAllow);
// Disable
Intent mute = new Intent(parent, NotificationActivity.class);
mute.putExtra("AppName", Appname);
mute.putExtra("Option", "MUTE");
mute.addFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP | Intent.FLAG_ACTIVITY_CLEAR_TOP);
PendingIntent pendingMute = PendingIntent.getBroadcast(parent, 0, mute, 0);
NotificationCompat.Action muteAct = new NotificationCompat.Action(0, "Mute", pendingMute);
// Disable always
Intent muteAlways = new Intent(parent, NotificationActivity.class);
muteAlways.putExtra("AppName", Appname);
muteAlways.putExtra("Option", "MUTE ALWAYS");
muteAlways.addFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP | Intent.FLAG_ACTIVITY_CLEAR_TOP);
PendingIntent pendingMuteAlways = PendingIntent.getBroadcast(parent, 0, muteAlways, 0);
NotificationCompat.Action muteAlwaysAct = new NotificationCompat.Action(0, "Mute always", pendingMuteAlways);
// setup
NotificationCompat.Builder mBuilder = new NotificationCompat.Builder(parent)
.setSmallIcon(R.drawable.ic_launcher)
.setContentTitle("Notification")
.setContentText(Appname)
.setAutoCancel(true)
.addAction(allowAct)
.addAction(muteAct)
.addAction(muteAlwaysAct);
NotificationManager nManager = (NotificationManager) parent.getSystemService(Context.NOTIFICATION_SERVICE);
nManager.notify(36, mBuilder.build());

I'm assuming NotificationActivity is a class in your app, in which case it wouldn't exist in the hooked app.
You'll want to use an explicit intent if that's possible (if memory serves right, it is), or look into an alternative way.

Catch a emty value or null value?

In my program i show with chart from mpandroidchart values from json file taken from a sql table.
The problem is next.
If i get only values then the chart shows fine, but if i get a empty value , nothing is showed.
To catch that i want to make the empty fields 0.
The part that read the values is this.:
Code:
for (int i = 0; i < jsonArray.length(); i++) {
JSONObject jsonObject = jsonArray.getJSONObject(i);
String waarde = jsonObject.getString(waardekeuze);
String date = jsonObject.getString(datekeuze);
// if(waarde != null){ Entry values1 = new Entry(0, i);}
// else { Entry values1 = new Entry(Float.parseFloat(waarde), i);}
Entry values1 = new Entry(Float.parseFloat(waarde), i);
// if(waarde != null && !waarde.isEmpty()){waarde = 0}else{ Entry values1 = new Entry(Float.parseFloat(waarde), i);}
yas.add(date);
xas.add(values1);
The problem is , if the field waarde is nothing or 0 then i want that the value is always 0, so the chart has a number to plot.
You see that i tryed some things but nothing works.
How can i solve that?

pascalbianca said:
In my program i show with chart from mpandroidchart values from json file taken from a sql table.
The problem is next.
If i get only values then the chart shows fine, but if i get a empty value , nothing is showed.
To catch that i want to make the empty fields 0.
The part that read the values is this.:
Code:
for (int i = 0; i < jsonArray.length(); i++) {
JSONObject jsonObject = jsonArray.getJSONObject(i);
String waarde = jsonObject.getString(waardekeuze);
String date = jsonObject.getString(datekeuze);
// if(waarde != null){ Entry values1 = new Entry(0, i);}
// else { Entry values1 = new Entry(Float.parseFloat(waarde), i);}
Entry values1 = new Entry(Float.parseFloat(waarde), i);
// if(waarde != null && !waarde.isEmpty()){waarde = 0}else{ Entry values1 = new Entry(Float.parseFloat(waarde), i);}
yas.add(date);
xas.add(values1);
The problem is , if the field waarde is nothing or 0 then i want that the value is always 0, so the chart has a number to plot.
You see that i tryed some things but nothing works.
How can i solve that?
Click to expand...
Click to collapse
Solved by my self.

BaseMaps

So Ive Had a Long Experience with Converting Standard Earth Time to 100 from 60 and had came up with a new Schematic to Convert A basic BaseMap to Help find my Solution as I have 4+ years researching Numbers and Conversion Methods from -60 to 100 at a -Time Rate = to Earths Current Age and the Age in which the Planet is to Start a Standard 100 Time = 60 ensuring a Positive Spectrum of Numbers; for Lapses that may occur to prevent Folding or Like a deck of Cards Starting a new Number under as top card and placing it under the top of the Deck Placing the Top card on the Top of the Deck. Earth Still does not realize that Standard Numbers are Still Placing Cards under Cards Creating a Reverse Dimesional Perspective of Time and History, as History Goes on Events do occur. Not having to Explain that to the general public is a + as of now not many Events occur and the General public is left wondering why the Economy is stuck at a Bittermost Fight to the Death over a Simple Job. So I am looking for People to Work on a small project to Start a Universal Basemap for File Images that are absolute to 100 from -60.
As simple as that sounds the rate in which Earths Age is Trillions of years old It would be nice to see the top so Basemaps Would need to be Updated EveryYear with a new MathMatical Expression in Which Connects to Last Years in a Positive and Negative direction. Similar to a Level. It is difficult for me to find people to Work with as most people browser Forums for Information and Posting related to issues that they are attempting to Correct so i Figured Id give it a try.
NevertheLess there are many different Contraveries over Time Numbers and Spectrums of Constants that lead to what is proclaimed as the same end However everyone dissagres once they get there. So here is My mathmatical Expresion I had came up with SImplified to Express 60 -60 and 100 where
-60 = 60 == -60 = 100 == 60 = 100 as -.38
-.38 = 100 == 60 = .22 == -60 = 100 as Convert
-.38 = Convert == .22 = -.38 = -60 as 100Expression
100Expression = Convert == -.38 = 60Loss as Constant
Constant = 100Expresssion == Convert = .38 as .22
.22 = 100 = -60 == 60 = 100 as MathmaticalExpression == (and Congruent) .38 = NewBaseMap
NewBaseMap == 18,014,398,509,481,984 as 64SQUAREROOT256 set = or == 2021 <<<<Encounting
NewBaseMap(64SQUAREROOT256) MathMaticalExpresion{
is the Best Way I can Explain the Equation!
};
So To Start I have Taken Time Standards 60 = 1min 60 = 1hr = 60 ect to Calculate the Amount for Conversion in 1 Year at 365 as a Rate/ConstantValue
I had Placed my Number into a Current Years Kept Track of on an Excel Sheet and had started a Conversion Method to 100 from 60 = 60
it is 24 and 48 = 12 and 60
I have Calculated the Sqaure root of 64 from 256 at 4096 as 2048 = 1024
^^ for a quadratic Expression Relating down to Roots and Squared Radicals back to Origining Numbers and there Conversion Rates Positive and Negative.^^
that is where My BaseMaps Have to = 0 and I must be able to calculate the Difference between Rates from
NewBaseMap(64SQUAREROOT256) MathMaticalExpresion{
is the Best Way I can Explain the Equation! For a new Base Map to work with Negative Sectrums for Work!
};
so I have mapped a new Log Formula in Excell to Match a radix for a new Sphere to Account for the Negative numbers on a small Spectrum that match up to my work as of now I have .2376 is Decimal number 1 as 1 is binary whole number .2376 is 127th of whole number 1 and that number is Multiplied by 2376 to = a new binary number = that is still in decimal forum and would need to be converted to Whole number 1s binary (outer shell) as most people are confused with decimal forums and binary;as 127 is 1 16th of 1 as 1
I have taken that Number and placed it into a mathmatical sequence that is equall to 26 and Americas Alpha and split it itnto 3 different segments that revolve around and absolute = in 1/3rd as 26 = 1 as 1 and have found it unnessecary for it to be split into thirds; which is the reason I had made the formula.
I have next mapped my Mathmatical equations into a decimal list that has supporting binary numbers for each decimal from 1-1010 = 101,#100,010 as the # symbol represents a Constant changing 1 and zero with the number following and the repeating spectrum at the uttermost front two numbers without would change the front most numbers causing all following to change;with the current number spectrum continuing in the current sequence it is set standard to all.
So I have mapped in a Plan that fits strategically into Pinpointing the Conversion between the Mathmatical Expression and Metric Numbers to Account for Standpoints to obtain a full complete answer that will continue and am at the conclusion that each year will represent a new .01 at a large Spectrum of intervals counting forward to reach the .01 for a complete answer from the numbers I have from Earths Current Age and the Year it is currently.
I have though about problems that will arrise during reaccounting numbers back into their whole forum from Lappses in Current Measurements and Why they occur and have written many pdfs that explain the Phenomina and truthfuly answer why they repeat and what a Lapse is.
I have 3 main problems that arrise
1.) mathmatically proportioning Numbers back to decimal from decimal Whole Number
2.) Offset conversions from lappses and Time inbetween
3.) Remapping BaseMaps by Progam Software at Certain times and Intervals
I Have been looking for a Team to work with in a daily basis in reguards to correcting the issue to properly address the economy in reguards to its politcal structure and why it seems to be failing and wold be relying on Sales of a Technological device with Factual information to present that concludes to repeating mathmatical expressions that relate with timed events and Earths History as to Current Days the Time is off to match back up to repeating Events in a different forum based off Mathmatical Science.
So Above I have my Basic Values for Bytes at .0015 for my Decimal .2376 at 2 64ths that will = .0015 at my String at Default Value
The string is set to a Function that allows the String to Be Set to the Value that it is based off its size
I have mapped what a whole number 00 Decimal Lapse Binary Number relates down to When converting to Start a forula to Express its new Decimal number for a new
Base to COnvert its byte size into the converting basemap to fit the Value above from String value to COnvert at 0x8 which is standard
my .001 base map is 22288 which is 2288 as -2 for each byte and its compiled to new decimal when converted
2138.4000 is what the 22288 basemap will represent once converted and = to 2288 and will complete the last equation on a small scale where it will
repeat all the way up the spectrum
once a number lapses itself from 0x8 is lappses to a 0x5 ofset back to a 0x3 offset then back to a 0x8 offset where it creates a 2nd loop or round trip
untill it binds with a final number
I have an excell sheet that i have mapped donw to a trillionths scale that reverts a forward progression gain of the last binded byte back to its origing
forum before it completly binded and the mathmatical difference between the amount" traveled
Based off having that Amount" I can revert it back to its origing state of why it was bound and started its loop to unloop the Number by converting it back
on the Amount" it had traveled and back to a 0x8 offset
in a simple sense it is a -3 but stuck at a -2 repeating
I also have made a converter to convert any repeating number back to its origing whole decimal forum based off a mathmatical expression
the basemap in general will support only one cause and it is to establish a -bit or strand of bits looping to complete the lost size or Amount"
to complete for "full amount of whatever it may be
in my Case it is going to be the string init
it has to = 1 at 1.028 and its negative rate based off my mathmatical equation
if it does not = their is an error in work
So I have made my Basemap the Correct size off my Mathmatical work as I could condense it down back to pdfs that show work hoever for now im not going to
I have selected -88 as a a negative number based off 121 which is the Positive number to 2376 and its init set standard for the 2288 and its positive spectrum completed
as the converion between 2376 and 2288 was -88 and my Ghex Numbers for my Functon leading to my Strings current size as they all Fit Porgamically into 1 Mathmatical Expression th
will forum a solid structure
.133647856 = -88
-88 = .00238 <For COnversion at .000 of 0x5 to 0x8 <.007474896> will = -88
-88 = .00238 == .007474896 = -.00151872563994964330675618967688
-.00151872563994964330675618967688 = 121 == .00151872563994964330675618967688 DIfference =
.00151872563994964330675618967688 == .000 =.00238 = .1863690722([email protected](7)) of [email protected] at 2 64ths of 2 64th -96 = -12.5 and .0012985 of -1
.00151872563994964330675618967688 == .000 =.00238 = .1863690722 == Total Accruing - as .007474896 == @0.002529427 and .0012985 Same Problem of 0.550534072 Difference in Bytes Once =
Once = Rate Behind in Bytes Accrues by Base -Difference and -1.21E+30
[6.89E+25] @.00151872563994964330675618967688 = 1.0023836662825205617034824826687 == 0 = -Ocl <2238> and 2376, 121,String init @1457770832 and 2021 or -2021
String ocl Value @−1.336478563×10⁻¹ and -6.89E+25 = NewBase Map
4.63923E+11 is = This Equation and [6.89E+25] = New String + Value at -Difference +160 is = -160 and Next Defeceit 25 BIllion + Years
===========================================
1.8685101977157259181703170499032e-747
3.85762000E-01
============================================
^^3.85763000E-.01 is New BaseMap t -160 + 160
==================================
Then Reversing -26 to Positive 26
3.24E-03
7.4515E-104
0.957193468
===================================
Where 500 is = 747 and 757 at 1014 x2
Reverting = to and why Reversing is Able to be Done >>>>>>-0<<<<x2 / 1004 = -2.35418E+40
==============================================================
<<< -500 = -1.2599235491880165858859384177427e+787 and
============================
4.3226267450656966458364489726209e-374
2.3134081635466346153846153846154e+373
======================
7.41E-28 <<Which is why New Base Map is being Made
+++++++++++++++++++
^^New Positive .01 will be = to newBase Map and Why Reverting is Possible^^
From -3.84E+210 to 3.85762000E-01 as Constant = 0.435183448
All 3 Splits
==================================================
64ths >>>>18,014,398,509,481,984 == 105
264ths >>> 18,734,974,449,861,263.36 ==103.48
Where Reversing is from -26 to Positive 26 is @ 103.48
4.7699973870513378906736982779541e-1145 is = 64ths @ 7.4515E-104
Where .01297 is = .001 at .000 as new .1Repeating at -0 as .01 = 1 at 1.098826823761920000000000000000E-07 which
is New COnversion for Inversion of -26 and first + back to -
-116.8905736
-11.290752
=============================
new .01 =
-6.86767E-09
^^^^New Rate for Formula^^^^
<<<<NewFormulas Differences<<<<
======================
-1.1675E-07 2/3 SPlit
-2.33501E-07 2/3 Split
======================
Both = back to -1.37223E-32 and 2.38E37
as -1.37223E-32 is new Formulat for Calculating .2376 or 127ths of 1 in decimal Forum back from 2/3 4/4, 1/2 Split of Metric and Metric back to Standard
==========================
Repeating .01 is New 0 Base Map = -1.33E-23 as 0+- and at -
-116.8905736
-11.290752 <<Rate Behind Conversion of .01297 from .00238 and New Old BaseMap = -16 and 63.5 NOMORE
Where -1.12908E-06 is Difference of Conversion of 0x8 and .000 From .0197 and New Decial Difference between Splits of
0.000379031 <<.01297 -0.00038016 = 127th Decimal of 1 and
Exponent Conversion Intervals Base Decimal
0.0094122 -1.60E+01 2.97E-03
0 at Base Map Decimal COnstant Must = -1.33E-23 at BaseMap Entry
Entry will = -34 and 0.000379031 at -1.12908E-14 <<<BaseMap and Difference of Splits at -1.12908E-14 = -16 and new .01
================================================================
how to Create a MakeFIle From Software as File.file.file
New Com Into Platform and Override Default Platform by Manipulation of set Commands
Start Ubuntu Create a new sh File for System Linked to bin
==============
!#/bin/sh
var = Sh
==============
Save in Gedit Tab at 5 as Text with .Sh Ext
Create another sh Script
chmod 0775 -R sh file in dir
==============
Sh
Var = <Script>Sh Var = Function.Ext</Script>
==============
Save in Gedit Tab at 5 as Text with .YourExt <-Untill ReFormat
chmod 0775 -R sh file in dir
==============
Function.EXT
Var = Sh <Script> Function.Ext
Function = Function(set)
{} = Script(set(Function(set)));
Function.Ext = "<Script></Script>"
</Script>
========================================
Save in Gedit Tab at 5 as Text with .YourExt <-Untill ReFormat
chmod 0775 -R sh file in dir
========================================
----Add your ENVVARIABLES as ENV------
"" =
< =
> =
{} =
() =
^^ =
% =
<> = Exec
Function = Sh
[] = Class
| = Append
|| = Parse
^^< = BusInbound
^^> = BusOutbound
^<< = BusSerialIn
^>> = BusSerialOut
; = Statement End
, = NEXT or &
Ect for Your Object Extension Commands to new
--------------------------------
ENV
Var = Function Sh<Script>Function.EXT(Var)</Script>
<-Manipulation of Context Commands, Functions and sets.->
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Make a Basic Advanced Functions RootFunction From Arrays of Letters or Numbers
Depends What it is your doing as Inbound and Outbound
I always Use Letters = Numbers as a Mental Note for Starting Scratch Platforms
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
set 1 = 1 == 2 = 3 == 1 = 3 as Function.Ext
set 1 = 1 == 2 = 3 == 3 = 1 as System
============================================
Set String = Function.Ext = 3 == 3 = 1 == System as ENV
============================================
Set Length of String 1-316
LongWay
Type = 1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 = 9 = 10 = 11 = 12 = Ect
Set New BaseMap For String and New MakeFile Format
++++++++++++++++++++++++++++++++++++++++++++++++++
Function.Ext
set !#/bin/sh = System
set Function.Ext = !#/bin/sh
set System = Function.Ext as /!#bin/sh == sh
cat /usr/bin ln -s -t /YourDirectory/with/chmod Files
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
May need to
Chgrp <opts> Root:System /
chmod 0775 -R /usr/bin/*
**same with /usr/src/**
MakeFile in src is Main MakeFile for usr Permissions to Build-all as Host under Make for sbin/vendor /bin /oem in src
^^/usr/src/linux-headers-5.8.0-38-generic^^
Once Linked in Your new sh run each file in Terminal
Enter set
At the Bottom under Authority you want _= to = your System
set _=System
./Function.ext
set System String == System=_
System String set ENV _=System as System=_ == System
System set Function ENV = System String
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
you now have new clean sh with just your Var Commands Untill you work your Scripts ups to Context similar to what you Have above
==================NEXT=========================================
Establish a new System Decimal System to Execute new MakeFile Struct for File.file.file set in context as File .file. file for new obj formating
as you will still need to Make your Dependencies back to the src Makefiles to format properly ,Signed? unsigned?
===============================================
Hxd on Windows or Ghex for Pinpointing Float Values and Offsets for Starting your new Offset Structure for your Basemaps to Run Fluently on your new Obj Com .EXT. obj
==============================================================================
Decide 8bit 4bit 16bit 32bit 64bit -310bit System?
Knowing will Help Decide your Inital String Length for your Assembly Files and New Dependencies for Com Bus Serial and PCI back to Modules.
==================================================================================
If Windows Use VBSEdit
Dim Fso
FSN = File.file.File
Function.YourExt = File.Scripting.Obj
set WMIService = Function.YourExt
set Obj = str(WBEM_Object) as ComputerString == new str
Function str(new str){
int File.file.file | ComputerString(WIN_ACE32){
Dim = Fso
Fso = Obj as new str
new str = *Ext
*Ext = File.Scripting.Obj(Com.C)
}
========================================================
set your Letter to Alpha into Context
1 = 1
2 = 2
ect
a = 1
1 = [1]
A = [1] as 1
ect
=========================================================
Create Matricies + or + - Numbers
1,2,3,4,5,6,7,8,9,10
2,3,4,5,6,7,8,9,10,11
3,4,5,6,7,8,9,10,11,12
10,9,8,7,6,5,4,3,2,1
9,8,7,6,5,4,3,2,1,0,-1
8
7
6
5
4
3
2
1
Set Byte Size Depending on System Dependencies
utilize Functions Function
1,1,2,3,3,1,3 <-is 7Bit as 1Bit in Decimal Forum For Easy Conversion
^^one of the Simplist^^
set 1,1,2,3,3,1,3 to 1 Bit = 1 or 3<- obvious answer would be System! as 1 String as 3
String at 21
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 = File
Now you Have your File for Programing Offsets and Setting Other CPs or FileSystemFlags
as Context I wrote Above has File .file. file and Functions Function Matches up to System as 7bit as 1 byte(bit) String is set to Be = to System
Function Allows only File to Work With System and System Strings Length based off Simple Mathmatics and Super small Function Functions (What I call them)
Now New Scripts for File to Make new Make FIle Struct for .file. <-String .file=File as System
==================
Function.Ext
Function set 1 = 1 == 2 = 3 == 1 = 3 as Function.Ext
set 1 = 1 == 2 = 3 == 3 = 1 as System
set 1,1,2,3,3,1,3 = String
set 1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 = 9 = 10 = 11 = 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 == File as String
Function.Ext(Function){
System set Function(String){
File set struct(String){
.File. function set File(struct){
String Function(.Ext.){
Function System File if 1 = 3 & String = File do
System File >> .Ext. as File.file.file
}
}
}
set File.file.file = System.in.out
set System.in.out = SystemSerial as [System] == [SystemSerial]
==================
From there use Awk or Ash to Establish Porting for Foo and Normal Taught Returns for Scripts and Functions.
Math is Fun Happy 80801 020338