Is there a way to listen to radio or anything audio threw my bluetooth headset? It's just mono. I was able to do so with my 8125 when I had it. Like have the set as wireless stero enabled with my bluetooth headset. I have the motorola HS850
thanks much
maybe -- try this
Remove the bluetooth headphones from the Tytn bluetooth partnerships, then re-pair it to the phone.
I know this is too simple a solution for this site, but I had a problem with my S9 headphones playing only in one ear, and I tried this and it works for stereo music. (I still haven't found a solution to mono-programs such as my audio-books, but I'm still looking...)
There's a BT audio CAB file here on the forum which enables basic sound through a mono headset. Keep searching, you'll find it.
Here is "BTaudio toggle", a simple program to send all audio out thru the BT earpiece.
Here's directions on how to stream radio stations on Kaiser;
http://forum.xda-developers.com/showthread.php?t=350675
Related
Hi folks!
Is there some kind of step by step manual how to get to a working solution for the well known BlueAngel Problem with it's headset connections?
I found a thread talking about some registry tweaks, but that only enables the menu option to send the sounds to the headset, but finally doesn't produce any sounds...
What I want to have is the instructions, given by the Navigon Mobile Navigator 5 beeing transferred to a bluetooth device (a parrot free speach device or a logitech headset).
I am already running ROM 1.4 and tried all various BT versions, but nothing worked..
Thanks for your help,
Balu
err.. I am looking for using bluetooth headset to listen mp3 as well, any help and suggestions? :wink:
im trying to figure out how to do that aswell, (listen to media player using bluetooth on my SVP m2000)
me too is there any idea pls
same
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
mamaich said:
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
Click to expand...
Click to collapse
Can you please provide the list of BT headsets (with make / model numbers) that supports this "advanced audio distribution profile"
ht820 does the job!
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
I upgraded the BT stack to 3900 and radio to 1.13 and added the extra profiles (instructions are in the Wiki), and it appears to work as both .
When the phone rings, WMP pauses and the left headset button answers the phone. Once you finish the call and hang up, WMP starts playback again.
The only problem that I still have is with intermittent dropout of the High Quality Audio. Anyone got any clues on curing this?
Got mine for around £60 UK sterling.
Is this an hardware limitation? Is this a ROM limitation? BT stack problem?
GSM phone preempting BT handfree?
If not HW, can we expect an upcoming solution to this?
Or, the only "hard" workaround is to plug a BT adapter (like Jabra A210) to redirect mike/spkr, and to desactivate BA BT.
Christmas tree, like.
Re: ht820 does the job!
woodrjh said:
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
Click to expand...
Click to collapse
Thanks for the Info.... does the HT850 also supports MP3 playback with BT???????????
have a look at these (even though cant solve the prob on BA)
http://www.itechdynamic.com/html/border22.htm
and this
http://answers.google.com/answers/threadview?id=496339
you might wanna have a look here
http://forum.xda-developers.com/viewtopic.php?p=144425#144425
Registry
Hi again.
So, we didn't really find a solution yet?
I once read something about a little change to the registry, so that a second profile for the normal BT Headset appears.
I searched but I can't find it again.
does anyone know which post I mean?
If so, can you give me a link to that, because I believe that is the right way to solve the problem...
the key is if your source (pda or notebook) is running BT audio gateway. centrino notebooks supports audio gateway. I have a Jabra BT800 and listens to MP3s played from an HP DV1000 notebook but cannot have it working through my XDA II mini (the latter does not support BT audio gateway)
you might find this helpful => http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
Does anybody know how to config my Blue Angel to play mp3's through my plantronics 510???
Mike Braeuer
Which ROM are you using? Some of them have the capability, some don't... some can have it added, and some can't...
If you provide a little more info then someone will be able to help
Not possible, as far as I know.
The BA can handle it, your headset can't. You can install the A2DP bluetooth profile (needed to stream music via Bluetooth) on your device, but you would still need a (stereo) headset that supports A2DP.
Other than that, I doubt you'd get much pleasure listening to mono music through one ear on a little speaker that's built for cell phone conversations...
If you'd like to listen to music wirelessly, there's a number of bluetooth headsets that support A2DP, all of them stereo and not too expensive.
Hey people. Having a bit of a problem here. I've got a single ear bluetooth headset that i'm trying to route audio to.
Telephone calls work fine but I need the ability to route notification / confirmation sounds and raw music streams (basically all audio) to the headset.
I've tried a few solutions (VJvolubilis, bluemusic-etc) but every time I enable the audio gateway, I just get a hissing sound that plays over the headset, while all other sound is routed thru my hima.
I was thinking about configging the headset in the registry to support wireless stereo but wouldn't have a clue what settings to enter.
Could someone provide some advice (or a regkey for wireless stereo) on how I could go about routing all standard audio?
Oh BTW, i've tried the broadcomm stack for hima. Apparently the wavedev.dll file included doesn't know how to either recognise the widcomm stack, or work with it to route audio.
Can someone with a wireless stereo headset post a reg backup of their HKLM/Software/Microsoft/Bluetooth directory?
Also anyone with working streaming standard audio to a single ear BT headset, please post both your audioGW.dll & wavedev.dll from \Windows.
I would think that your BT headset does not support the A2DP proflie and therefore cannot be used to stream BT audio.
My stereo BT headphone works just fine using the MS BT stack since WM 5.0 AKU 2.X
Sascha
SaBo, the headset is NOT a stereo BT headset. It's a single-ear handsfree headset (the apple bluetooth headset to be precise).
I know it WILL work with all routed audio because i've synced it with a friend's HP PDA that had a native BT stack and all audio (including mp3s and notifications) played thru the headset.
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Anyone else have any ideas?
As I know, it's impossible in himalaya because of technical reasons.
NxJay said:
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Click to expand...
Click to collapse
Afaik it's not possible on Himalaya.
You will need an A2DP Headset and it will work.
Sascha
I know for sure it can be done. I had other issue, but that was the point.
you have to change some registrity entry, a don't remeber which, as soon as i find it i'll post it for you.
Here is a hack: try it
http://forum.xda-developers.com/showthread.php?t=257415
http://foro.todopocketpc.com/showthread.php?t=128642
Andur, no luck on those 2 hacks.
Tried em both. Nothing happened.
The second hack, i enabled BTAudioOn.exe. All that happened was a hissing sound (kinda like background noise/static) started to play outta the headset, while all other sound kept playing outta my Hima.
Any other ideas? Or even better, any ways to fix the widcomm stack so i can use that to route audio? This MS stack is so useless.
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Patrick22 said:
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Click to expand...
Click to collapse
You cant as the wired headset is the antenna
Ludacris said:
You cant as the wired headset is the antenna
Click to expand...
Click to collapse
And do you know or it's possible to use the wired headset only for the radio signal, and use my Bluetooth headset for the sound?
Patrick22 said:
And do you know or it's possible to use the wired headset only for the radio signal, and use my Bluetooth headset for the sound?
Click to expand...
Click to collapse
I have been trying to find out how to do just this.
I ride a motorbike, and have a bluetooth crash helmet with buit in speakers / mike which works a treat for answering and making calls and indeed listening to TomTom navigation instructions from my HTC Topaz.
However, I have yet found a solution to allow me to listen to the radio via bluetooth. As you have also discovered, the headset acts as an antena but then diconects the sound from the bluetooth headset when connected. I figure that there must be a way to program the phone to use the blutooth headset as the default "speaker" and the plug in headset as only the antena.
I will repost this thread in the Topaz forum too to see if anyone has a solution.
One partial solution that I have discovered is streaming radio via an internet connection. This works, although the connection stream is not always the best and of course there is a data "overhead charge" involved.
T
no it's not possible to have both a wired headset connected an a bluetooth
even if the wires headset is only acting as antenna
Patrick22 said:
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Click to expand...
Click to collapse
I finally got it to work using the file posted at the end of this thread.
Lovin it!
http://forum.xda-developers.com/showthread.php?t=541238
Hello everyone,
I can pair my car's bluetooth and Diamond flawlessly... However I am also wondering if it is possible to use the car speakers as output in order to listen to mp3s in my phone... ofcourse via bluetooth...
I know that people can listen to music via their bluetooth dongles on the ear. From which menu or program should i also try for the car?
Thanks in adv.
if the bluetooth in your car support ad2p then it's just a question about bonding them and choosing stereo headset on the phone
but if your car don't there is no way
Thanks, unfortunetely there's not such a function (as far as I checked on the web)