Replacement Digitizer/LCD - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hey guys, I really don't know what to do. I cleaned my screen with some water on a rag and it got inside my Angel, it won't recognize touching and even after drying it out won't respond to touch commands.
Any ideas, or if I have to buy a replacement, anyone got a place that won't charge me up the rear?
EDIT:
Also, there is a clear picture on the screen. It just isn't responding. I already have dismantled it and put it back together, with no result.
Thanks for the help.

maybe, the problem is the flex cable of your digitizer. check it for breaks and proper contacts with the PCB.
the water might have seeped inside the contacts and broke/shorted the connection from the PCB.
try using an air brush or a contact cleaner.

I actually ended up purchasing another BA off of eBay, and will proceed with the repair, will post pics and stuff once I take the old one apart.

ok... will wait for your post.
i am just curious with what happened, and what was broken.

Related

Advice from someone who has disassembled their Kaiser?

This question is directed to those who have taken apart their Kaiser, and specifically screen the screen assembly. I've got water issues and the screen is broke now. Here's the story. I might get some outrageous warranty charges.
I installed the InvisiShield (www.shieldzone.com) on my phone. Essentially it's a screen protector that is indestructible. It practically is, but unfortunately it destroyed my phone. To install it you have to spray this liquid on the back of the 'shield' and apply it to your phone, using a squeegee to get the bubbles out. It went pretty well, and I was happy with the results, but 3 days later my screen stopped working.
Everything is washed out, and it looks like water got inside the LCD somehow. For instance, colors streak across the LCD in fonts, etc.
I called ATT and they are mailing a replacement, and I'll be expected to send this phone back. They said if the return phone has damage that would void warranty (water damage, etc) I'll be prorated $400 on my next bill.
Over the phone the customer representative had me remove the battery and check one of the water damage pads to make sure it was white. It is.
For those who have seen internal phone assembly, is there any of these directly by the screen that will pick up moisture?
As far as ATT knows, the phone LCD suddenly stopped working. I'll get a replacement and /hopefully/ theres not a moisture pad right next to the LCD assembly. Anyone know?
Damn, hate those broken screen story's. Scars the **** out of me.
jon_k said:
This question is directed to those who have taken apart their Kaiser, and specifically screen the screen assembly. I've got water issues and the screen is broke now. Here's the story. I might get some outrageous warranty charges.
I installed the InvisiShield (www.shieldzone.com) on my phone. Essentially it's a screen protector that is indestructible. It practically is, but unfortunately it destroyed my phone. To install it you have to spray this liquid on the back of the 'shield' and apply it to your phone, using a squeegee to get the bubbles out. It went pretty well, and I was happy with the results, but 3 days later my screen stopped working.
Everything is washed out, and it looks like water got inside the LCD somehow. For instance, colors streak across the LCD in fonts, etc.
I called ATT and they are mailing a replacement, and I'll be expected to send this phone back. They said if the return phone has damage that would void warranty (water damage, etc) I'll be prorated $400 on my next bill.
Over the phone the customer representative had me remove the battery and check one of the water damage pads to make sure it was white. It is.
For those who have seen internal phone assembly, is there any of these directly by the screen that will pick up moisture?
As far as ATT knows, the phone LCD suddenly stopped working. I'll get a replacement and /hopefully/ theres not a moisture pad right next to the LCD assembly. Anyone know?
Click to expand...
Click to collapse
I dont know but man I hope that there isn't. Have you tried contacting invisishield? Never mind, b/c they'll blame you. Most applicators like that use alcohol to evaporate the remaining moisture that's left. My friend applied it to his, and he used very little liquid(scared), so GOOD LUCK!! I MEAN IT
Tough break, sounds dangerous to pour liquid on the screen though !
On a related matter has anyone seen pics of a Kaiser pulled apart ? Still wondering where the GPS antenna is located !
Yeah, I hope I don't get shafted.
I love the invisibleshield, and I put one on my $1,500 DSLR camera screen, but since the Kaiser screen is recessed a bit, when you squeegee the solution out from under the screen, it cannot be wiped away. It just gets pushed out between the phone's body bezel, and the screen glass -- right in to the phone. With my DSLR camera, the screen is flush with the body, so when squeegee'd I could quickly wipe the water/alcohol away.
Contacting Invisibleshield got me:
Our liability does not extend beyond our product. The lifetime warranty only covers the replacement of the invisibleSHIELD and NOT a warranty for the device the shield is protecting.
Click to expand...
Click to collapse
If ATT charges me the $400 if they find out, I guess I'll pay it. It's my fault, but by extension of invisibleshield. Guess I'll learn not to use that product on anything that has a recessed screen. I was thinking of buying an invisible shield for my laptop as well, but it's screen is slightly recessed like the kaiser, so you can forget me doing that!
xmoo said:
Damn, hate those broken screen story's. Scars the **** out of me.
Click to expand...
Click to collapse
That was why I bought the 'best screen shield on the market' for scratches (invisibleshield). Coincidentally that was the demise of my phone. I also purchased a steel case that basically would let me sit on my phone (uncomfortably) if i wanted. The desire to protect my phone, did the opposite in my case.
Wow what a horror story. Thanks for sharing with us - may prevent another phone from dying.
Wondering if you remove the battery and not using for a few days until the water dries out before turning it on?
zcink said:
Wow what a horror story. Thanks for sharing with us - may prevent another phone from dying.
Wondering if you remove the battery and not using for a few days until the water dries out before turning it on?
Click to expand...
Click to collapse
Could be, zcink. The replacement phone is on it's way. I can remove the battery during this time it takes for the replacement to come and see what happens. Unfortunately, I think one of the following has happened:
1) Water seeped between the LCD protetcive glass, and the LCD itself, and somehow soaked in to the LCD causing mini shorts -- thus resulting in kludged text.
2) Water seeped to the phone's connecting cable where the screen input is, dried on the wires, thus creating a short -- destroying the signal.
Either way, when the liquid dry's, the mineral deposits causing the short will still exist, still causing a short. For both, repair requires disassembly, voiding my warranty. I could buy a new replacement screen from the China place for about $100, but if ATT /might/ replace it without screwing me, I'll take the chance. Just wanted to know what my chances /were/ them finding out it's got water in it.
I guess the moral is.
Don't buy from InvisibleShield, unless you use a SPARING amount of spray they they include. They include a huge bottle, and I used 2 sprays worth applied to my shield. This created enough excess to be squeegeed right into my phones body. The phone worked great for a few days, until one day at work, while I was using it -- BAM -- the screen was dead.
There isn't the water dectector there, but I'm pretty sure the technicians would notice the damaged screen.
I know those screen protectors, used them for alot of things. Using one right now actully. Its the one you wash with soap and warm water, and just let it dry, it have a static adhesive to the the scree.
I see. yeah hopefully the ATT tech will be lazy and just grant you the warranty without investigating. just play dumb. If they charge you the $400 call them up and threaten to switch to T-Mobile.
My phone died and T-Mobile was going to do nothing until I threatened to switch to ATT, then they replaced it.
I seriously doubt that they will be able to tell unless you really soaked it, next time use a dry screen protector, they work just fine, no bubbles. The only moisture sensor is on the battery, and if it was a tiny amount of moisture, there's likely no signs in the screen assembly. AT&T isn't likely going to dissect the screen to check.
Kaiser disassembly howto
I have found this one somewhere here, can't remember where... Hope this helps.
http://www.mediafire.com/?0ly2msnybhb
Hadn't heard of that screen protector before, guess it would work well on an HTC Touch, not sure how the "full body" version works though!
gabriel31337 said:
I have found this one somewhere here, can't remember where... Hope this helps.
http://www.mediafire.com/?0ly2msnybhb
Click to expand...
Click to collapse
Amazing find. Thanks!
It appears to me that the screen itself is it's own modular unit. Meaning, after phone disassembly, you'd have to disassemble the actual screen itself. Further, there is no moisture indicators directly by the assembly it seems.
Knock on wood, but I'd hope a tech wouldn't go that far to determine the fault of the phone. I assume they would if theres telltale signs of water damage to the display (streaking might be a common sign.) But, maybe, just maybe, they won't.
http://www.gpspassion.com/download/HTC_Kaiser_disassembly.pdf
updating link
RemE said:
The only moisture sensor is on the battery
Click to expand...
Click to collapse
The service manual shows 4 of them, one under the battery that can be seen from the outside, one at the top and one at the bottom of the mainboard's other side, and.. one on the board that holds the bottom front panel switches, so very close to the LCD.
Personally I wouldn't have asked for a replacement phone, I'd have disassembled the phone and tried to clean it if made dirty by the liquid, bought a spare screen off ebay if it was definitely dead, and if ultimately it didn't work bought another phone off ebay for less than $400. But maybe I like risk
Here, Perfect for what you need, used it myself: http://www.mindsofwisemen.com/fileso/other/ReplacingTheLCDonaKaiser.pdf
Best wishes
Mod Edit:
Not sure if the above noted guide is officially and with permission uploaded to that site, but to give credit to members here it is (SKDVR’s Adaption of Tony Chen’s guide)
http://forum.xda-developers.com/showpost.php?p=2247685&postcount=19
i took mine apart to replace the screen; pics and info on what i did and where i got it. didn't see any water indicators near the screen when i did it, didn't think to look...
Keyboard membrane removal.
So, I've had trouble with my keyboard lately and wanted to just clean off the contacts on the membrane...but I can't seem to get the damned thing out of the plastic keyboard Middle Housing.
I have gotten everything apart so the housing is separated. Verified that I did it the way the service manual says...but i saw NOTHING about how to disassemble the keyboard from the housing.
PLZ! Pictures are good.
Try replacing digitizer screen
found that digitizer screen is above lcd and can be purcased for about $10 on ebay
hello guys,
my tytn II cant detect simcard saying the simcard is missing.
Any idea whats wrong???

How to replace the Digitizer/Touch Panel? any body?

I have looked everywhere but no luck! Can someone please give clear instruction how to replace the digitizer/touch panel?
I have only found instructions how to disassemble the diamond up to the LCD stage only! But after that it does not show how to take the LCD out of the housing to expose the Digitizer.
Hope someone knows how to do it.
Thanks.
The instructions you looked at, where they from the Service Manual or another source?
one from the service manual at XDA-WiKi page and other post from http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond
but both goes up to the same stage and stop.
Yeh I've got the same service manual and it doesn't really go into any detail about how to replace the digitizer. Maybe there's another 'level' of the Service Manual for that. Only question is, where does one obtain it? Good luck replacing it - how come you're replacing it btw? Your touch screen not responding?
Digitizers (touch screen) usually are not being replaced at all. The LCD screen (with digitizer) is the one block. And it is being changed completely in service centers.
But: If you can find just digitizer, then you may cut off with office knife the digitizer from the lcd-screen itself (on borders only, do not cut your screen) and then place the new digitizer on the screen firmly (it will stick to it on borders).
I've done it with my treo 750 yesterday.
kortez said:
Digitizers (touch screen) usually are not being replaced at all. The LCD screen (with digitizer) is the one block. And it is being changed completely in service centers.
But: If you can find just digitizer, then you may cut off with office knife the digitizer from the lcd-screen itself (on borders only, do not cut your screen) and then place the new digitizer on the screen firmly (it will stick to it on borders).
I've done it with my treo 750 yesterday.
Click to expand...
Click to collapse
Thanks for your input. Digitizers for Diamond are available for sale separately.
just to make sure i got this right, if it is only fixed on LCD by sticking to it without any screws can i pry it out from the front side without disassembling the diamond?
Scratched screen
Ok, So I finnaly scratched the screen. Quite badly, must add !!
I was wondering the costs to replace the screen. Do I need a whole case / digitizer or lcd ?
Also what would the costs be roughly, as I am unable to contact my local repair shop....
dalewinterstein said:
Ok, So I finnaly scratched the screen. Quite badly, must add !!
I was wondering the costs to replace the screen. Do I need a whole case / digitizer or lcd ?
Also what would the costs be roughly, as I am unable to contact my local repair shop....
Click to expand...
Click to collapse
digitizer arround 29 USD + shipping.
not sure if LCD is available yet.
if you scratched the screen you will only need to replace the digitizer which is the actual screen you press on.
the only thing is no clear instruction how to replace it!
ammar said:
Thanks for your input. Digitizers for Diamond are available for sale separately.
just to make sure i got this right, if it is only fixed on LCD by sticking to it without any screws can i pry it out from the front side without disassembling the diamond?
Click to expand...
Click to collapse
Without disassembling - no, for sure.
And seeing the video - I would not suggest you to, it's quite hard, cuz it's all packed very tight.
I heard that there's glass in front of screen on diamond that sends the pressures to the real touch screen. But that maybe not true. I guess you'll have to disassemble the diamond to see what the touchscreen is on it.
Or you shoudl find the video, where you can clearly see if the touch diamond' screen have any protective glass..
Kortez,
thanks for your help, do you have link to the said video?
thanks
can't remember where I've seen. But it exists.
http://www.youtube.com/watch?v=_jY46M_NGz0
Check ou this web site
http://www.dealextreme.com/
it has very replacement parts and with a very good price, and free shipping!!!
I've just recived my tytn II digitizer for only 4,99.
Hope it helps.
tape said:
Check ou this web site
http://www.dealextreme.com/
it has very replacement parts and with a very good price, and free shipping!!!
I've just recived my tytn II digitizer for only 4,99.
Hope it helps.
Click to expand...
Click to collapse
We need the instruction on the replacement step, not the part.
I've just replaced the digitizer now on my Diamond...having issues getting it back together though, will go into it in a minute.
Originally I ordered only a digitizer, then dismantled the phone and hit a brick wall when I tried getting the screen from the metal fascia, the adesive is really strong, I actually ended up cracking the screen under the digitizer and so ended up having to buy a screen with a digitizer for £10 more - to be honest I recommend this is what you do - if you order just a digitizer then you have to mess about soldering the cable onto the cable of the screen (as well as getting the broken digitizer off the screen and probably cracking it in the process)
Anyway, my new one came today, managed to put it onto the fascia fine and have started putting the thing back together, but I cant connect the 2 cables to the mainboard part! cos for a start theyre underneath and not long at all! anyone have any ideas?
Adam86 said:
I've just replaced the digitizer now on my Diamond...having issues getting it back together though, will go into it in a minute.
Originally I ordered only a digitizer, then dismantled the phone and hit a brick wall when I tried getting the screen from the metal fascia, the adesive is really strong, I actually ended up cracking the screen under the digitizer and so ended up having to buy a screen with a digitizer for £10 more - to be honest I recommend this is what you do - if you order just a digitizer then you have to mess about soldering the cable onto the cable of the screen (as well as getting the broken digitizer off the screen and probably cracking it in the process)
Anyway, my new one came today, managed to put it onto the fascia fine and have started putting the thing back together, but I cant connect the 2 cables to the mainboard part! cos for a start theyre underneath and not long at all! anyone have any ideas?
Click to expand...
Click to collapse
I thought the digitizer cable can be just slot into the connector type, no? Did your digitizer come with soft ply tools? which to help on plying out the screen and digitizer i heard. I'm gathering info before placing my purchase on the digitizer... Coz its badly scratches, felt and kicked!
No unfortunately not - you have to solder it on theres some contacts for it.
I managed to get all mine back together you just have to take your time and be really careful - it works perfectly now. I'm really chuffed as its a really good spare to have
If I was you i'd order a screan and a digiziser together cause then it will just be a case of pulling the screen off the adesive on the fascia (it's stuck really well you might even crack your broken one like I did) and then stick the replacement on and reassemble!
Hi, could anyone of you make some pictures or a small video about how to get the display out of the body, or where exactly i need to pull the display out.
i have already dismantled my diamond, but still didnt get the display and digitizer out. When i pulled the display i think i broke it somehow, because now my display shows me only stripes...
anyway, my ordered display still didnt arrive....
if you could make a vid or some pictures, it would be very helpful.
Adam86 said:
No unfortunately not - you have to solder it on theres some contacts for it.
I managed to get all mine back together you just have to take your time and be really careful - it works perfectly now. I'm really chuffed as its a really good spare to have
If I was you i'd order a screan and a digiziser together cause then it will just be a case of pulling the screen off the adesive on the fascia (it's stuck really well you might even crack your broken one like I did) and then stick the replacement on and reassemble!
Click to expand...
Click to collapse
how was the soldering part? difficult? as i heard it might melt the plastic cable, no?
If i do cracked the existing digitizer, no harm i see since its already borken though.
Well, i managed to get the lcd and tocuh sceen apart, and now am stuck with the soldering part either.
the sceen has to be pushed out from the inside....the glue they used is pretty strong. and the display breaks pretty fast....
isnt there a way to connect the lcd and ts without soldering?

Damaged Digitizer or LCD Screen? Help please :(

Hi,
Last night I knocked a small table and my girlfriends phone and a remote for the TV fell off.
We noticed that her phone now has a ring of black dots on the screen, mostly visible with a white background (E.G websites) but also from the home screen and the like.
We think she's cancelled her phone insurance, as she's never had a payment out to the company.
Can anyone tell me if its a Digitizer (What is one of these? Is it just the touch screen sensitive part of the phone?) Or the actual LCD Screen itself?
If you click on the photo it will load a larger image
Thanks for any assistance, kinda annoyed about this and wondering if I can repair myself with the parts on ebay. Or does anyone know how much HTC Charge to repair similar? Either in $USD, £GBP or €Eur, I can convert and get a ball park figure.
Hi
First of all is the phone still in warranty? If so take it back to an HTC dealer they should repair it for you for free. TD2 screens are not very good and it's a common fault. ( i had to have mine repaired after just only 3 weeks! )
The TD2 screen is made out of 2 parts, The touch screen or the 'digitizer' as you call it and a normal LCD screen underneath. You need to establish which has gone faulty.
If the touch screen still operates normally i.e the screen does not lock up or freeze and allows you to navigate normally then its the lcd screen below. If the touch screen is faulty one good way of checking is to put a piece of tape over the damaged area and try to lift it up a little to see if the marks / dots disappear and functionality can temporarily be restored.
Its hard to tell from your picture which it is..... sorry
I'm not sure how much a replacement by a dealer would cost, but i'm sure you can replace either yourself. ebay is a good place to look
Hope this helps.
I've had a reply from HTC UK who said the following:
That looks like there are a bunch of very small cracks in the screen. the black stuff is likely the Liquid Crystal from inside the display that has leaked out. If the dots get larger then it would definitely seem that the screen has got some cracks in it.
if this is the case, the standard charge for replacing the LCD is around £180 as sadly it is all one complete unit on the diamond 2, so it is not just the LCD underneath that needs to be replaced, but the whole screen assembly including the touchscreen layer and the actual LCD.
I hope this information helps you to make up your mind.
best regards,
Pete W
HTC
Click to expand...
Click to collapse
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Hi mate,
had the same problem...
the item you psetd from ebay is not the one you need to change.
you need a digitizer, not an lcd screen.
i got one from ebay (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItemVersion&item=290376721935&view=all&tid=393718237019), it includes both the lcd and the digitizer, you can check ebay to find other auctions offering the digitizer only.
you can change the digitizer on your own if you don't mind loosing the waranty of your phone.
cheers
Hi,
I had already found this: http://cgi.ebay.co.uk/Touch-Screen-...UK_Mobiles_Accessories_RL?hash=item5882e7ef74
Will buy in a bit, funds are a bit short today.
The Touch Screen's functionality hasn't changed at all though, no sticking buttons or anything. So I suspect that its the LCD Screen thats damaged but will follow you're advise as you're going to have more experiance than me (and its the cheaper part to begin with!)
Scrap the above post.. my g/f has just told me that the dots on her phone are bigger/worse. Looks like its the LCD Screen afterall
i still believe it is not the LCD.
the digitizer is actually sitted on a glass, and the LCD is below that. it is very difficult to harm the LCD. i also though it was the LCD (at least i wasn't sure which was broken) so i ordered both of them.
if you disasseble the phone you will be sure if it is the LCD or not.
i vote for the digitizer
good luck, if you need any help, i'll be pleased to help you..
Just to update, A few days after I posted and got helpful advice on here.. she called me up to say the dots have disappeared, and they have still gone now a few days after.
She said she put it in the office where she works, under a printer paper tray, and the office was warm. Something has (maybe only temporarily) fixed it.
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Well F**K me! just bought a second hand diamond 2 to replace my xperia...
...seemed to work great checking it out... went home with the phone in my pocket... and as soon as I turn it on the touch screen doesn't work
dissected the whole phone only to discover the digitizer is glued to the bezel!
I ordered this from Ebay, will update if I got it working with the brand new housing + digitizer: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=380166349182&ssPageName=STRK:MEWNX:IT
fingeres crossed
Please report back here on this thread if it works
fluke said:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Can any one help with this matter?
fluke said:
Can any one help with this matter?
Click to expand...
Click to collapse
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
jodeltje said:
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
Click to expand...
Click to collapse
Thanks for the reply as I said previously:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Also the LCD didn´t had any marks at all, but i´m going to buy the TS+LCD and replaced by parts first the lcd because it´s a lot easier to replace then if the problem persists the TS.
I will post the result later when i get the parts to replace.
Superman_1122 said:
I've had a reply from HTC UK who said the following:
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Click to expand...
Click to collapse
Can anyone confirm the above link as being both Lcd and Digitizer? I'm sure it doesn't mention it in the listing but the picture looks like it's showing both connectors.
Most likely only the LCD that's my conclusion if you look at the sellers store.
But to be sure e-mail the seller and ask.
http://stores.shop.ebay.co.uk/Elect...QQ_sidZ195653022?_nkw=diamond+2&submit=Search
Soooooo, as I've already posted here, My digitizer was busted on the phone I just bought... what I didn't tell was that I ordered a digitizer, then checked if I could remove it easily...came to the conclusion that I couldn't... and ordered a digitizer+housing so I could easily fit it on.
the mail brought me the digitizer today, and while knowing a better solution was on it's way I couldn't resist and try if I could make it work.
Turns out it super easy to seperate the digitizer from the bezel using a hairdryer (softening the glue) and a knife:
Take your phone apart, just the 4 screws, click the plastic center off it. Remove the digitizer cable, the touchscreen cable and the speaker cable.
now you are able to remove the green plate which holds all chips and stuff.
underneath that is the screen, lift it up gently going under it from the gap the removal of volume buttons leaves, put it away safely.
Now remove the speaker, the buttons under the zoom bar, and the power button(don't forget the the power button, and rubbery thingy that falls out of the bottom, the hole needs to be at the bottom when putting it back in).
your phone should be completely empty by now... just the front and the digitize glued together.
make the front of the phone reaaaaaaaaaallllly hot, put the knive between the metal and the digitizer (I started at the part where the zoombar is) and gently push it between the two parts... (from the inside of the phone to the oudside). Now just keep the whole thing above the dryer to keep it warm and slowly slice your way around the phone (no secret wires are there that you can cut through).
I used some random glue I had lying around to glue the front back to the new digitizer... perfect!
so the screen is like new now
ps bought this digitizer: http://cgi.ebay.nl/Touch-Screen-Dig...wItemQQptZPDA_Accessories?hash=item45eed6effc
Thanks for that jodeltje.
It sounds exactly the same as when i replaced the digitizer on an Omnia. Really not as hard as one might imagine. Taking your time and being careful are the most important things.
Hey guys,
I came into same boat last night.
Dropped my T-Mobile MDA Compact V from 2.5ft table, Backwards (Not towards LCD) and now it has black dots on screen. I guess the LCD has pressed backwards by chip sets.
Here is a screenshot.
I think its LCD damaged but I don't have cash to replace nor device warranty.
Do you think the problem solves eventually? Coz once I had dropped sony mobile and it too had same issue but solved after many days.
Hopefully it solves.
BTW; does LCD affixed to Digitizer? by seeing service manual, it doesn't look like it is. And I afraid to get cheap hongkong LCD screens for about 30$ since they won't be true quality display. i.e blueish.
Thanks...
Best Regards
hello CRACING,
sorry about what happened to you...
from the picture i can say that you have a problem with the digitizer...
your LCD is ok.
i tend to have this problem over and over again the last 1,5 years... i replace the digitizer (or the glass on which the digitizer is attached to) every 3-4 months..
yes the ones you get from ebay are not that good quiality, but well it keeps the phone working...
if you need assistance on replacing the digitizer, i can help you, by providing pictures and istructions...
cheers

[Q] broken sim/sd tray, speaker, and vibration. what can i do?

the other day my power button stopped working and, since it was past my warranty, i took the phone apart and sprayed some CRC QD electronics cleaner on it to fix the problem. in the process of taking it apart i forgot to take out my sim and sd card and the tray where they fit in came off with the back casing. i put the little ribbon thing on the bottom back in the hole it came out of but it must be messed up because now my phone doesnt recognize my sim or sd. i dont have much experience working with phones and i could find no help online for proper instalation of the sim tray. can someboy tell me how to fix this?
also the speaker and vibration stopped working after my lock button repair but i dont believe i touched any wires connected to that. is it just a coincidence? possible that the cleaner got in there? how can i fix it?
obviously the sim card is my priority right now but any help would be appreciated.
thanks!
I would suggest looking for either connexion2005 (aka mobiletechvideos) or AdamOutler. Both of them are very knowledgeable in the hardware of the Captivate, and I would guess that either of them could help you out with your situation.
I just so happen to have a couple of the SIM/SDCard circuit boards. I'll have to find them. I ordered a few of them while researching UnBrickable Mod. The circuit board is held on with double-sided tape on top of a metallic shield. It's very easy to replace. Anyway, PM sent.
AdamOutler said:
I just so happen to have a couple of the SIM/SDCard circuit boards. I'll have to find them. I ordered a few of them while researching UnBrickable Mod. The circuit board is held on with double-sided tape on top of a metallic shield. It's very easy to replace. Anyway, PM sent.
Click to expand...
Click to collapse
Do I really need a new part? I'm not certain but nothing seems to be broken and everything is intact. It feels more like something is just out of place and not making a connection. If it helps to understand what I'm trying to say I could post a pic for you to evaluate.
The part is cheap and easy to replace.
ok ill try get my paypal in order and get that to you as soon as i can. do you have an idea for why my speaker and vibration isnt working?
Actually I figured out the problem. I took everything out piece by piece and it was just a loose connector under the logic board. Sorry for bothering you with a stupid mistake but thanks for all your help and suggestions

[Q] LCD + SIM Flex Cable Connectors Broken - Suggestions?

First time poster here and wanted to start by saying thanks to the members on here who have spent countless hours teaching others how to root, unlock, flash custom ROMs, etc. Your guidance has provided lots of fun in the Android world.
Recently, the LCD glass screen had shattered on my HTC One, and I had purchased a replacement front and back. Upon transferring the motherboard + the secondary chip to the new housing, I accidentally broke off the flex cable connectors for the LCD screen and SIM card. Upon completion of reassembly, I crossed my fingers as I pressed the power button, only to be met with the initial power-on vibration and no image on the LCD. Unfortunately, I can't verify if the SIM slot is working without the LCD, but I'd assume it isn't.
Anyway, thanks for listening to my story. I've supplemented it with pictures indicating where I messed up. The first picture is the motherboard. Compare the two connectors contained in the red circle. The left one has the white tab, while the right is missing its white tab. The second picture is the SIM connector to the secondary board. As you may notice yet again, the white connector is missing. If anyone has legit/illegit solutions to this problem, I'd love to hear from you.
Thanks in advance!
yarrrrr said:
First time poster here and wanted to start by saying thanks to the members on here who have spent countless hours teaching others how to root, unlock, flash custom ROMs, etc. Your guidance has provided lots of fun in the Android world.
Recently, the LCD glass screen had shattered on my HTC One, and I had purchased a replacement front and back. Upon transferring the motherboard + the secondary chip to the new housing, I accidentally broke off the flex cable connectors for the LCD screen and SIM card. Upon completion of reassembly, I crossed my fingers as I pressed the power button, only to be met with the initial power-on vibration and no image on the LCD. Unfortunately, I can't verify if the SIM slot is working without the LCD, but I'd assume it isn't.
Anyway, thanks for listening to my story. I've supplemented it with pictures indicating where I messed up. The first picture is the motherboard. Compare the two connectors contained in the red circle. The left one has the white tab, while the right is missing its white tab. The second picture is the SIM connector to the secondary board. As you may notice yet again, the white connector is missing. If anyone has legit/illegit solutions to this problem, I'd love to hear from you.
Thanks in advance!
Click to expand...
Click to collapse
unless you have high soldering skills, you should go to a repair shop to get these pcb connectors replaced or even send it to htc. I highly doubt htc will replace the connectors but may replace the entire main board which probably won't be cheap at all.
or the other solution if its to expensive, buy a ''for parts or not working'' M7 from ebay and remove the motherboard to service your phone. (i.e a unit that have a cracked screen but still able to boot) Don't forget it must have a clean imei.
btw I don't understand how you managed to broke that connector tab, it should unlock easily with delicate force with a precision screwdriver..
alray said:
unless you have high soldering skills, you should go to a repair shop to get these pcb connectors replaced or even send it to htc. I highly doubt htc will replace the connectors but may replace the entire main board which probably won't be cheap at all.
or the other solution if its to expensive, buy a ''for parts or not working'' M7 from ebay and remove the motherboard to service your phone. (i.e a unit that have a cracked screen but still able to boot) Don't forget it must have a clean imei.
btw I don't understand how you managed to broke that connector tab, it should unlock easily with delicate force with a precision screwdriver..
Click to expand...
Click to collapse
Thanks for the help, appreciate the honesty.
I'll chalk it up to inexperience, with this being my first attempt at phone surgery. Hopefully the second attempt will go much, much smoother.
Will keep an eye out for HTC One's with a cracked screen!
yarrrrr said:
Thanks for the help, appreciate the honesty.
I'll chalk it up to inexperience, with this being my first attempt at phone surgery. Hopefully the second attempt will go much, much smoother.
Will keep an eye out for HTC One's with a cracked screen!
Click to expand...
Click to collapse
I know exactly how you broke it off. There's four of those connectors and two of them have a different type of flip. It's silly. I have the exact same problem too.
Did you end up getting yours fixed?

Categories

Resources