Related
Hello. I have been experiencing massive shortages of ram on my wizard. I started reading about all the different roms, and have friends that have tried the molski 30mb free rom. I also read about some others that pack much used stuff in the extended rom. My idea was to see if I would be able to make my own extended rom packed with some of my most used apps. To figure this out, I need to know a few things..... First, how large is the extended rom? Second, When you install programs from the extended rom, they install to the rom, right? (or extended rom? unsure here). If so, how much space is left in the rom for extended rom installs?
Is there an app that will load on my wizard and tell me rom info?
Basically I want to see if I can install stuff like wisbar, maybe even resco explorer into the extended rom to save on program space while saving ram using molski's 30mb free rom. This would give me more install space (very limited on that) and more ram (checking under couch cushions for any extra lately). Any usefull information would be greatly appreciated. TIA
*bump* Even help with search terms would help?! Ive tried just about anything I can think of and only find 100 page threads about cooked roms. Anything at all might help...
*bump* 87 ppl on this forum have read thism and someone must have seen something somewhere
I also have another question to add to the queue. How do you tell if your phone is CID unlocked? I know I sim unlocked it, but am not sure if the CID unlock worked or not. TIA for your help
Darkrift said:
Hello. I have been experiencing massive shortages of ram on my wizard. I started reading about all the different roms, and have friends that have tried the molski 30mb free rom. I also read about some others that pack much used stuff in the extended rom. My idea was to see if I would be able to make my own extended rom packed with some of my most used apps. To figure this out, I need to know a few things..... First, how large is the extended rom? Second, When you install programs from the extended rom, they install to the rom, right? (or extended rom? unsure here). If so, how much space is left in the rom for extended rom installs?
Is there an app that will load on my wizard and tell me rom info?
Basically I want to see if I can install stuff like wisbar, maybe even resco explorer into the extended rom to save on program space while saving ram using molski's 30mb free rom. This would give me more install space (very limited on that) and more ram (checking under couch cushions for any extra lately). Any usefull information would be greatly appreciated. TIA
Click to expand...
Click to collapse
check my signature ,you will most what you need .
http://forum.xda-developers.com/showthread.php?p=968417
Read farias info, but i give u an intro: extrom is 10mb, installing something from extrom dont install in rom but in the device storage...
In any case the os free memory when he really need it automatically so i ask u a q, why do u think that u have memory outage problems?
I am low on memory (ram) and program storage memory. I installed molski's rom last night, but I am still really low on both. I have 6mb free program storage, and even after installing molski's 30mbfree rom, i have 16-20mb free ram. I have tried closing almost all of my programs, but this does not go up. I figured that if I installed a few of my most used programs in the extended rom, and they were installed to the rom (wasnt sure about this) that I would have some extra program storage memory. I am going to see if removing my today plugins helps at all, but I only have 3. Resco, and phone alarm (dont really need it now) and one that allows meto turn on bt/wifi with a single tap.
mmm...yea, i also have around 18mb and im using farias 3.2 rom (falls to around 6mb during startup, this is normal)...its normal for this kind of device...thats why i ask u why u need more memory...in any case if u try to run something that asks for more memory the chances r that the 200mhz processor r going to be another limit...example: 32mb gba roms, some car game mentioned around, (pocketquake?), etc...
and i have about 30mb free storage, but this is because i store allmost everithing in a 1gb minisd...
btw, i use batterystatus, agile and ilancher plugins...and vbar also running in background...
Darkrift said:
I installed molski's rom last night, .
Click to expand...
Click to collapse
I tried also molski's ROM and after reboot tried get rid of extended ROM by pressing soft restart button after instalation completed(when it prompted that selfonciguration will take place after3 seconds).
After reboot I had abou 44 MB free memory in storage and about 30 MB in programs.
But this is ilusion after instalation few programs (2-3MB at all)checked memory again and it drops more then 13MB.
By reghacking registry it is possible to see extrom as "Extrom2" it is 10 MB with more than 9,8MB free space and it is not writable.
Unlocking extrom would be solution and I've tried several unlocking tools,but with zero succes so far
Thank you all for your replies. I guess I will just have to live with this as it is. I love this device and if it only had a faster cpu (like my axim x51) It would be perfect. I currently do not have many problems with it, but I would like to get it running the fastest that is possible.
Thx again.
did u tried omapclock?
Folks lets try to get a listing of software that you may belive that causes problems with Molski's Rom. I think this will be benifical for newer users to be able to go to one place and see all of the software that we have experienced problems with so they do not have to.
If at all possible for every program that we list as a problem I would like to have an alternative.
From my experience.....
O2 sms plus (for mass sms messages) causes a problem with the native SMS software. It has been known to prevent you from reciving or send sms messages. I am currently hunting for another program but I have not had any luck.
Thanks to all the Chefs that keep us in some great ROMs, keep em comming!
I think we all know SPB time does not work...and man if you install it just go ahead and do a hard reset.
SPB time is one of my FAVORITES but if you want to keep the rom do not install it.
After installing my 8125 got so hung up I couldn't even do a hard reset...I had to reflash from bootloader.
pocketbreeze does the same thing
Sun'n'moon
http://forum.xda-developers.com/showpost.php?p=1090597&postcount=266
This is very strange I have been using this rom since it came out with out the autofill or the calender giving me any type of problem. What other software are you running?
Click to expand...
Click to collapse
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
KFi said:
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
Click to expand...
Click to collapse
Try going through the whole cid unlocking again and use the tmobile 2.26 rom then install Molski's rom again. Let me know what happens.
shamus said:
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
Click to expand...
Click to collapse
I have had this happen with the time and date going back to June 7th once I took the battery. I don't take the battery normaly so I just reset the time. Why is this a problem?
The system lockup is most likely software related, but what other software are you running. If possible I would try to reflash the Rom and install spb backup and backup after you install all the software that comes with the Rom that you use. Then install each additional software and due what you would normaly due when it locks up. If it works then backup again and so on and so on till you narrow the problem down.
This is what I do and it works for me but if there is an easier way that someone knows of please let us know.
This is the whole reason that I started this thread so we can learn from each others problems.
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
great rom so far only one minor prob.
1) no pRssReader. the today plugin causes a reboot. no big deal. must be badly written sw.
newbie2369 said:
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
Click to expand...
Click to collapse
Gents 1st off lets stay on the topic.
Dude you must learn to use the search this issue has been addressed by others. Go the Main Molski 3.0.0.0 thread and look in there. If you still cant find it email me and I will help you the best I can.
ed_bracam said:
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
Click to expand...
Click to collapse
I haven't used the prssreader as of yet but this also came up with Jose's AKU3.2 rom. We have to see what the gods sugest on that one.
Can you take a screen shot so I can see what your talking about?
Its the weekend so I will be working in my nite life bussiness so give me a few days. to respond. Or see if someone else can help as well.
KFi said:
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
Click to expand...
Click to collapse
Try these cabs... Works fine for me (swedish)
ed_bracam said:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
Click to expand...
Click to collapse
I've attached a copy of Qmail. It handles RSS feeds nicely. It will also handle email. Basically, its a Japanese version of Outlook Express. Good thing is that the program is written in English. But, there is NO documentation in English. You'll have to figure out how to make it work on your own.
There is not setup. Just unzip it and copy it to your storage card. Then just run the "q3u.exe" program.
Can not use slide-out keyboard for cyrillic characters
Guys,
The rom is great! Molski, Faria - thank you very much.
The biggest problem for me is that I can not type Cyrillic characters using the slide-out keyboard. The standard way to set it up (by setting \\HKCU\ControlPanel\Keybd\Locale) - does not work with this ROM.
Any suggestions would be very appreciated.
Hey man, It will not so bad.
Do you get back you backup by SPB Backup? The backuping programs sometimes damage devices GSM. Tray Hard reset and than it will be IMHO OK
I dont belive, that that ROM is such unusefull like you write.
vippie said:
You point the wrong way, I think it's more a cingular issue. I'm very glad with Molski's roms until now. They work perfectly fine overhere.
Click to expand...
Click to collapse
Howdy. I just want to make sure I read this correctly. So, you have T-Mobile (from your profile) and Molski's ROM 3.0.0.0 and you have not lost -any- calls/VM Notifications at all? I mean, it took me a few days to realize I was missing calls (when people started complaining at me thinking I was screening).
I am in Cingular, and if you are not missing calls (please, try to make sure as accurately as you can...) do report back, as this would be a huge pointer and there are quite a few of us stuck with this awesome ROM.
[btw: I LOVE this ROM and have no plans to go back... we all just need to figure this one out]
RE: the topic of this thread, this ROM seems 100% stable for me, battery usage and all. The actual thread for the radio/missed calls is: http://forum.xda-developers.com/showthread.php?t=287087
Voice Command 1.5
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
tharryman said:
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
Click to expand...
Click to collapse
This is a compatability issue due to the fact that the Contacts Database was changed in AKU 3.x
Got the Tmobile wing, or HTC Herald. I'm trying to put preferably a 32bit EMU (e.g. PocketGBA) or at least a 16 bit EMU (Pocket SNES) on it. Used MemMaid to kill a bunch of programs but I'm still stuck without enough memory (RAM). Anyway anyone knows how to squeeze some more memory out of the Wing?
The best method IMHO is to allocate more to programs...since I have a 2GB Micro SD card I don't need storage, but can't seem to do it. And I don't know enough to find and change the memory allocation in the registry (if that's where it is)
Anyhelp?? I just want more memory, nothing fancy?? Suggestions? Looked through several forums and haven't found what I need.: p
Koijima said:
Got the Tmobile wing, or HTC Herald. I'm trying to put preferably a 32bit EMU (e.g. PocketGBA) or at least a 16 bit EMU (Pocket SNES) on it. Used MemMaid to kill a bunch of programs but I'm still stuck without enough memory (RAM). Anyway anyone knows how to squeeze some more memory out of the Wing?
The best method IMHO is to allocate more to programs...since I have a 2GB Micro SD card I don't need storage, but can't seem to do it. And I don't know enough to find and change the memory allocation in the registry (if that's where it is)
Anyhelp?? I just want more memory, nothing fancy?? Suggestions? Looked through several forums and haven't found what I need.: p
Click to expand...
Click to collapse
The problem is the pagepool.
All cooked rom for wizard have 4 or 8MB pagepool because that´s enough. I guess on wing it is the normal 12MB - too much.
We have to cook smaler ones and we will get back the big RAM like 30MB.
Let´s wait for official update and start cooking without the possibility of bricking.
lol
Dang-it
I was hoping I didn't have to cook the rom, I've bricked things before and once burned....
Oh well I just want it to play GBA, (wanted to wait for PSP2 to come out to decide on getting a portable) I'll hang back and wait for a popular Aserg cooked OS or something. Something using the original windows mobile WWE edition.
Oh damn I've deleted stuff from my extrom, crap should have backed it up... I think it was only the tzone thing, still just in case. well I'll get around to it whenever..
Now to look up how to make sure I use 802.11g and not 802.11b
Thanks man.
papamopps;1304169 said:
The problem is the pagepool.
All cooked rom for wizard have 4 or 8MB pagepool because that´s enough. I guess on wing it is the normal 12MB - too much.
Click to expand...
Click to collapse
I also have a wing and experiencing the same memory problems.. your saying that if i lower the "pagepool," a term I'm unfamiliar with, more program memory will be allocated after a soft reset; right now only 27% of the program memory is free after a soft reset. Is this pagepool thing a simple registry hack, or do u need to flash a custom rom to lower it? either way, can someone please explain to me how to lower the pagepool, or easier, a recommendation for a custom rom that allocates more program memory.. before I switched to the wing, my mda would always have atleast 50+% free program memory.. please help. thanks.
http://forum.xda-developers.com/showthread.php?t=313263
try your luck and post results in the thread pls
/edit: It worked for my device... 26.53 RAM Free now
Wing Memory Help?
I have a wing with 1.02 mb storage memory and 14.26 program memory with nothing running. I have installed all my cab.s on my 4 gig memory card. Am i doing something wrong? Why do I have so little memory? I have change the pagepoll to 4 mb's.
I have inastalled on my mem card:
sling player
audible logic and cardonware
ms live search
mud inc Kokonotsu
aserg policies
TCPMP the core pocket media player
Skunkworks Flashvideobundle
Spb weather
A_c Slide2unlock
Chi-Tai Dang BatteryStatus TD-plugin
I am sure I installed all the cab. files on my storage card.
Any insight or help woud be appreciated.
dstegner119 said:
I have a wing with 1.02 mb storage memory and 14.26 program memory with nothing running. I have installed all my cab.s on my 4 gig memory card. Am i doing something wrong? Why do I have so little memory? I have change the pagepoll to 4 mb's.
I have inastalled on my mem card:
sling player
audible logic and cardonware
ms live search
mud inc Kokonotsu
aserg policies
TCPMP the core pocket media player
Skunkworks Flashvideobundle
Spb weather
A_c Slide2unlock
Chi-Tai Dang BatteryStatus TD-plugin
I am sure I installed all the cab. files on my storage card.
Any insight or help woud be appreciated.
Click to expand...
Click to collapse
Just a thought. Have you deleted your emails and cleared the temp files in your Internet Explorer?
In any case you should set it up so that these get saved on the storage card.
yes.. doing that on a regular bases does help but pagepool makes a big difference
ChInEsE ChIcKeN said:
yes.. doing that on a regular bases does help but pagepool makes a big difference
Click to expand...
Click to collapse
Did you read that he already has pagepool set at 4mb?
patspdaphone said:
Did you read that he already has pagepool set at 4mb?
Click to expand...
Click to collapse
i thought it was a better idea to set it to 6mb instead of 4mb??
im not sure whats better but i have the 4mb and it works great plenty of memory on a fresh reboot...about 25-27mb
With all applications closed, using the 4mb pagepool setting, I get 21mb.
Apparently each device is slightly different? Wouldn't it be nice if HTC had supplied more memory in the first place...and if Windows wasn't always sucking mem. for no reason
adam79 said:
I also have a wing and experiencing the same memory problems.. your saying that if i lower the "pagepool," a term I'm unfamiliar with, more program memory will be allocated after a soft reset; right now only 27% of the program memory is free after a soft reset. Is this pagepool thing a simple registry hack, or do u need to flash a custom rom to lower it? either way, can someone please explain to me how to lower the pagepool, or easier, a recommendation for a custom rom that allocates more program memory.. before I switched to the wing, my mda would always have atleast 50+% free program memory.. please help. thanks.
Click to expand...
Click to collapse
I just got my Wing a couple of weeks ago, installed a new ROM and did the page pool and am very upset with the lack of storage memory. With my MDA I had both vanilla ROM's and full ROM's installed with lots of memory left any where from 24MB to 30MG free storage ram. With the Wing I had installed only a few programs like Intellisync for work, PocketCM all emails and IE cache are on the card, with this I have just 13 mg of storage space. I do not have the newest updated Office...when I tried to intstall it the old was not deleted but this just installed over it and took away precious memory.
I do miss the days of a full stocked cooked ROM with lots of storage memory. Am considering getting rid of this phone and getting something else.
I'm running about 20lb on average. I did have about 23mb before, but had to hard reset (for other reasons) and reconfigure everything. I think I need to see what else I can put on my storage card. Only using about 81mb right now, but was running about 250mb before. Going to reinstall a few programs onto the card today and see how much more I can free up.
Wow i am an idiot. I did figure this out. Thought I set it up to storage card but... anyway thanks,
try this:
http://forum.xda-developers.com/showthread.php?t=324594
much easier to do. I have 6mb pagepool set and when i boot up fresh i get just under 20mb of free ram with a total program memory of 49.89mb. I'd suggest the 6mb pagepool as many people have said the 4mb pagepool is too small and the device will suffer performance issues.
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?
Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job