Database Develop

Can anyone comment on WM6 and voice command over bluetooth

Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks

mpovolo said:
Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks
Click to expand...
Click to collapse
not really working for me, once I push the BT button - it ask for the command but the the BT disconnects ...

Works fine for me on my JX-10.

My Jabra BT8010 works well so far with voice command.
FYI; The default mode on the BT8010 is "music mode" This means if you push the large center BT8010 button into your head, it is the pause/play button for Media Player. Here's what you do.......
You have to press the (mode) button at the tip of the BT8010 once to turn off music mode. *icon will change on LCD screen) Now when you press the large center BT8010 button into your head, you'll then hear the voice command boobeep and it works great!

Turn on BT durring a call?
BT question:
Are we supposed to be able to activate our bluetooth headset durring a phone call already in progress? (you want to switch your headset on, in the midde of phone call) I was able to do this just fine on my iPAQ 6900. I noticed that if I activate bluetooth durring a phone call, the system/phone audio will not transfer to the bt headset unless I hang up the current phone call first. The system icon will show it's connected though! I then have to hang upt and call them back and my headset works as it should. This also happened on my 750 via WM5, but I was hoping the new 750 WM6 would fix this. (just updated)
Is this the same behavior for everyone else or is it somethign to do with my BT8010?

I can transfer calls to my Motorola H700 just fine, but I heard the BT8010 dont work quite right with WM. I was actually interested in getting the BT8010's pretty soon - how well does it work? Is the call transfering during a call problem the only thing you've encountered? I've heard it takes away your ringtone(only rings in the headset - not from the phone) can you turn a2dp on/off with ease?

I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.

singhnx said:
I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.
Click to expand...
Click to collapse
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom

hiwayfuzz said:
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom
Click to expand...
Click to collapse
same for me with motorola BT (HS500).

Strange. Mine allows me to say the command ... just tried it and dialed out to my brother.

I figured it out, I need to hit the action button my jabra before the audio is transfered over to the headset. (durring an already active phone call with bt turned on later/in the middle of it) This makes sense, since it allows you to control when the audio switches over in case you're not ready. In the past it was automatic. I remember a few times not having my headset on so it's better this way anyway. Everything works great.

Well VC is halfway working for me so far with my MotoHS850... I can make calls by speaking the name and then it dials fine. But VC is not announcing the Caller via BT, although I have that selected under VC settings.
I am also getting this odd behavior I described in detail here: http://discussion.treocentral.com/showthread.php?t=149924

I cant even get it to work without a BT headset... think it is my accent though.

For me, everything works fine so far using a Jabra BT5020 except for one thing. When I activate VC via the headset I get the prompt over bluetooth but then silence. The prompt then repeats over the handset, and it is only then that I am able to initiate a voice command. If I try to do it at the first prompt over the headset, the command won't make it to the phone. The commands are also not repeating over the headset. Anyone else experiencing this?

Jawbone, HTC/Cingular Tilt Voice Commander not working for me...
I too am having difficulties to get the Jawbone to activate Voice Commander v1.60.4622.0. It will start to open the phone connection but then that's it.
Also MS Voice Command is suppose to do more like open apps.; calendar, contacts, etc... nothing happens.
I know MSVC works, when I hit the activation button I set (which happens to be the Windows Start menu) it then will do the typical VC beep and then allow me to speak my command.
I'm thinking it's more a Jawbone thing. I did have it working on my 8525 but I killed that thing.

BT and VC work fine for me using Jawbone. You need to look at the help file on the Palm relating to the VC proper usage as it did not really work for me until I did some reading. There are very specific words you must use to get it to work i.e. Open Contacts FAILS but Show Contacts succeeds. Then Show "conatct name" will show you the person you are looking for. As far as initiating a call via BT headset, I press the Jawbone side button this gives me a tone then a pause then another tone then you speak your instructions i.e. Call John Smith, there will be a pause while the app looks for John Smith, then it will repeat the name to you and ask if you want to call John Smith at Home, Work, or mobile depending on what you have saved for that particular contact. I have noticed it isn't perfect. If you have a contact with a phonetically difficult name it would be wise to change the contact name to Bob B instead of Bettencourt as at times the VC doesn't understand the name spoken. Overall it works pretty good, much better than my old Razr and there is no setup involved just say the name and go.

**HELP!** Problem with SE DS980 Music Streaming with TyTN II

Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.

http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread

caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.

Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....

How come answering with BT earpiece turns ringer to silent ?

My setup:
- NoThrills wm6.1 ROM.
- Sony HBH-DS980 BT earpiece.
- SPB mobile shell II
- Jetware Hands-free Bluetooth Extensions.
Everytime I answer a call with the bluetooth earpiece, at the end of the call the phone automatically changes the ringer profile to "silent mode". This doesn't happen if I answer not over BT...
Any help ?

Nevermind. Installing SPB Phone suite solved the problem.

MS Voice Command Help

For some reason today MS Voice Command stopped announcing things such as messages and incoming phone calls. It wrked fine before, announced everything, but now when i get a call or message (vmail, txt, email) my headset will beep as iff it were about to anounce like it did before but then is just silent (i can hear the speaker active though as iff the bluetooth is active). I have everything checked to announce in the options and nothing has been changed but i am just wondering if anyone can help me solve this prob;em...ive also tried unchecking all options, soft resetting and then rechecking them all to no avail...

sorry guys i ended up finding a solution...my own idiocy lol

just bought a new bluetooth headset (jabra bt530) and now voice command won't announce calls through the headset. the phone rings and the headset also makes a sound to notify of a call, but it won't announce the caller's name. i can perform all other voice command functions from the headset.
everything worked fine with my last headset. and calls are announced when the headset is off so the phone isn't the problem. if it means anything, this headset has the wireless stereo profile.

diar said:
just bought a new bluetooth headset (jabra bt530) and now voice command won't announce calls through the headset. the phone rings and the headset also makes a sound to notify of a call, but it won't announce the caller's name. i can perform all other voice command functions from the headset.
everything worked fine with my last headset. and calls are announced when the headset is off so the phone isn't the problem. if it means anything, this headset has the wireless stereo profile.
Click to expand...
Click to collapse
Did you go into Voice Command Setting and Click Notifications and set it to announce over bluetooth?
You may search for the MSVC Tutorial Thread in The Kaiser Software Section.

I have to be a real newb...what is voice command?Where is it?

Its a program that you have to install unless you have it in your rom already, it allows you to COMPLETELY use you phone with voice commands. It requires no voice training at all, it works with microsoft's dynamic voice recognition.

fixed one problem and got another. using start>connections>bluetooth, i turned off the wireless stereo option and the headset started announcing calls. however, now the headset won't announce text messages. they'll just go through the phone speaker. this is weird.
i guess i could just use bt toggle to direct all audio to the headset but if there is any other way to fix it let me know.

problem solved. deleted the partnership and then paired it agan. but this time i immediately turned off the wireless stereo function. voila. everything comes thru the headset.

diar said:
problem solved. deleted the partnership and then paired it agan. but this time i immediately turned off the wireless stereo function. voila. everything comes thru the headset.
Click to expand...
Click to collapse
diar, how do you initiate MVC from your Jabra bt530. I get all notifications, just can't use it from my bluetooth. I tried holding the button, pressing it twice; nothing.

Help Help A list of MSVC
Does anyone now where in the internet a compleate list of all the voice commands. I have had no luck finding them.

How can I pair a Bluetooth headset?

I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?

Refer to the headset menu to perform a hard reset on it (on a nokia headset this done by simultaneously pressing power and action buttons till it alternates its LED between red and green). Activate the bluetooth on the tab and make it discoverable. In bluetooth setting scan for devices till the headset appears.

Same Issue
slamorte said:
I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?
Click to expand...
Click to collapse
I have a TMobile tab with the same problem. It connects to my btooth antenna, but not my two btooth headsets.

My headset bluetooth also facing the same problem. I read the manual and it say i have to press the answer button for more than 8 second as a hard reset to the headset. Later my tab can detect the headset.
You should read the manual and try to do hard reset to your headset
Sent from my GT-P1000 using XDA App

Can't seem to find out how to reset the headset. Nothing in the manual or Google (it's a Samsung HM1100).
It's weird - the Astro Bluetooth network shows the headset in its Bluetooth explorer but the GT will not even see the device to pair to.

Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it

naimmkassim said:
Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it
Click to expand...
Click to collapse
Still No Luck.