Opening new downloads - Tilt, TyTN II, MDA Vario III General

I just got a new htc tilt (kaiser), and I am trying to get used to the windows operating sys. I downloaded the htc home plug in successfully, but I can't download any of Schap's files on xda. I download the files and put them in a new folder and snyc my pc and phone. When i open the program in the phone i click the setup and it goes to internet explorer and downloads. When I try to open the other files is says i need to run the app first. Any suggestions, I know I am doing something stupid.

Related

Installing cab files

I once again will show my ignorance but what process do I use to install cab files onto my Sprint ppc 6600. I have them downloaded but I am clueless as to what I need to do next. This site has been AWESOME thanks!
Using Activesync, put your Pocket PC into the cradle, when it is done syncing, press the Explore button. Then go to a folder you want the cab to be put, and copy it from your desktop computer and paste it into the Explore window. Then, on your pocket pc, use File Explorer to locate the file, and then select it to have it install.
Can't install
After copying the cab file to Blue Angel and transfer the cab file, I tap on the file to install. All I get tis this message " The file "*.dll" is in use or is in Rom. No matter how I try or reset the device, still I can't get it installed.

N00B Question ... but not covered, even in the Tilt FAQ

Can someone please answer the most basic of N00B questions ...
1) How do I install .EXE files onto the Tilt
2) How do I install .CAB files onto the Tilt
Specifically, with # 1, I am trying to install KaiserTweak, but it does not run under Windows XP and there is no info on how to get it onto the phone and how to install it (it has an XML too).
Thanks!
copy them over to your kaiser. run them by clicking on them using file explorer
Ummm ... N00bier
Thanks, but HOW?
I have activesync running, and it is doing a bang up job. I cannot figure out how to get the EXE and XML over onto the phone.
Also, how would a CAB work, same way?
OMG!
cab - copy to phone and run through file explorer
exe - run through pc/ or run directly from the device
to copy files over to your PPC...
click the explore button on your activesync app running on your desktop from there you can drag and drop the files anywhere
I drag and drop .cabs to my storage card, I have a cab folder with two folders inside one is device and one is card. It is an easy backup and reminds me of where i installed that particular cab. Now, if you have an .exe or .msi you can run that from your desktop and as long as you are synced the install wizard will install the app to your phone giving you the option to install it on the device or the card.
Now, some applications are meant to be ran from your phone, such as mplayer or Kaiser Tweaks. You copy the file over to your device and click the .exe when you want to run the program.
Hope this helps!

Trying to put games on..

I downloaded a couple of games i want to put on my phone to test.
but im unsure how to put them on. can someone help me out..?
thanks.
and also if anyone knows any good sites i could download games aswell, that your sure that will work.
Connect your device to your PC via activesync.
If they're .exe files, run them on your PC and follow the process (i recommend installing them on your storage card)
IF they are .cab files or if Windows tells you they're not valid win32 apps then copy them over to your device. U can use activesync to this, right click the activesync icon in the taskbar and click on explore.
Once the files are on your device, browse to where you put them using file explorer and tap the files to install...
This is pretty basic stuff so keep it in mind when installing any other app/game.

how to install applications?

hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Marridi said:
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Click to expand...
Click to collapse
Or for a longer version of this:
StarMonkee said:
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Click to expand...
Click to collapse
Do the following, hehe
When you download most programs they will be in .CAB format. Now all this means is that they can be installed DIRECT from the phone.
What I do is create a folder on my Diamond in Internal Storage called APPS and make sure my Diamond is synced to my pc / laptop using Activesync on XP or Windows Mobile Device centre if on Vista and then copy all the .CABS that i have downloaded into the APPS folder on my phone.
Once im ready to install the applications its very simple.
On your Diamond click on START and then PROGRAMS and locate FILE EXPLORER.
When FILE EXPLORER has loaded up in the top left of the window you will notice a memory card icon with the current directory you mobile is pointing to, push this and you will then see MY DEVICE and the location you are currently at.
If you have used a pc before its very similar to how the pc windows explorer used to navigate, anyway, select MY DEVICE and then choose INTERNAL STORAGE and then APPS.
Then its just a matter of selecting which application you wish to install as all the .CABS will be displayed. Select the one you want to install and follow the installation process.
If there are any small programs 1mb or less then I tend to install these onto my phone storage memory and for games I install them onto INTERNAL STORAGE but its up to you. Some programs require a SOFT RESET to work.
The SOFT RESET button is located where the STYLUS is stored on the phone, pull the STYLUS out and then you will see a RED BUTTON inside.
Push this and your phone will restart.
There is more information here at good ol xda-developers.com and also http://modmydiamond.info
Hope this helps!
Tom
thnx guys, but i know this, i did install some applications that end with caB, but when i tried to install the gsen or the advanced config for example, they didnt come in .CAB form. they came as zip and when i opened the file, all there was files and the one names setup was as xml.
i dont know, maybe i downloading the wrong files!! plz help? where do i download those files in .CAB format?
it worked, thnx guys..
xda is the best forum all around..

CAB files opening with Opera

Hello,
I just bought the new HTC Touch Diamond today from Telus Mobility (My Provider) and when I put on a program to install and try to open the .cab file in the File Explorer, it tries to open it in Opera Mobile and I cannot install the program.
I am using ActiveSync to transfer the files from my computer to the Internal Storage area of my phone, then I find the files using the File Explorer on the phone, click the .cab file and it tries to open it in Opera Mobile.
Anyone have any ideas?
P.S. I just tried a Soft Reset, and that didn't help.
Thanks in advance!!
Try to manually rename the files to "whatever.CAB." Add .cab to it and see if that'll get it working.
Hmm..
Okay, I tried that and it didn't work.
I am trying to install a program and the files it has is:
_setup - XML Document (I click on that to activate install?)
ADVANC~1.000
ADVANC~1
ADVANC~1.003
ADVANC~1.004
ADVANC~2.002
Hope this helps..
(Yes, I realize it's not a cab file >.< )
After reviewing the situation over. You are NOT supposed to extract the files, then put them on your phone. Leave them in the archive (.cab file), upload to your phone and then execute it.
It should start installing right away.
Hope this helps for anyone else!!

Categories

Resources