Database Develop

MMS Configuration, or other MMS issues

Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.

anyone, help would be appreciated.

Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...

_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.

I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.

I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?

_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........

The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.

Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol

ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.

What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..

settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????

I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?

re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio

mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file

robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend

hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks

ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.

error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics

Thanks!!
More proof how valuable the information shared here can be.

Kaiser on Softbank in Japan?

Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,

Theoretically it is possible as the radios and sim cards should be compatible.
However, the Softbank AP for the flat rate data plan has not been cracked. Yet. There are a few people with Treo 750s that are also interested in seeing this password revealed - as well as me. I would like to try the Libra - or perhaps even the Omni or Wings (when and if they debut) if they have the right radios.
If you don't mind paying more for data, then the expensive/slow data connection to Softbank is possible.

RayB said:
Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Click to expand...
Click to collapse
Here's the interesting thing. Ordered a Kaiser from UK via DHL (delivered in 3 days!) and today when I stuck in my Softbank SIM, I found that the Kaiser (TytnII) software automatically detected that I was on Softbank and automatically installed the connection settings for Softbank. I am able to surf using that auto configured connection though I cannot confirm this is the connection that uses the flat rate 3G thing. More investigation needed.
There's been tonnes of posts on how people can setup a link using software/hacks/whatever to access the flat rate software package but haven't had enough time to check it out.
At the moment, except a direct HSDPA (as indicated by the icon) internet link, there's no MMS or SMS (!) so I need to figure out why; latter might be because MMS and SMS seems to share the same mailbox now so maybe because I've not setup mms as yet, even SMS won't come in
Boy, why has everything in Japan got to be so complicated...

Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.

Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich

ofiaich said:
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
Click to expand...
Click to collapse
Ofiaich - no, no, don't worry about the off-topic post.
And you don't ever need to be scared of modding your phone as long as you have a backup utility. I recommend SPB Backup, but some are fond of Sprite.
The Kaiser is a relatively new device so you are kind of flying blind. However, since both machines run WM6, many of the same packages should be viable. Let's start with the directions found in Make your X01HT a WM6 Device (for Gaijins)
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
I believe that these files are generic for WM5/6, and that they should work on any QVGA machine. The picture from Asukal's page shows them working on an Alpine, so they are not specific to Hermes.
The following directions however, might be specific to the Hermes, as they are registry settings for the keyboard. The above packages should actually automatically change the two HKCU registry entries below.
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
Click to expand...
Click to collapse
I am really interested in helping you (i.e. using you as a guinea pig) as I am also interested in importing different devices for use in Japan and need Japanese support.

thanks very much larsuck !
I sent you a PM !
I have found some of those pages before! I am an absolute beginner for Windows Mobile so some procedures are a bit daunting !
I hope to get a TyTn II very soon ! Saving up and trading old phones etc!
I will read your links again thoroughly and come back to you!
Ofiaich

I purchased Kaiser.
There was environment I displayed Japanese, and to be able to beat against Japanese with Atok.
I tested SB in Kaiser with usable ConnSBM_ORE2h.zip, but Password was not formed.
I think that Password is made if I do not understand that I make ORE2cert.cab for Kaiser, and it is possible for this.

Maro,
So, let me just make sure I understand: you have a Kaiser, and that the Kaiser can read Japanese, and that you can input Japanese using third-party software called ATOK.
That is good news for our friend ofiaich.
Now, I understand you tried to install Softbank's flat rate connection set up using ConnSBM.cab, ORE2cert.cab, Out.xml, and WIFIwake.exe, all four of these files being the ones used for the Hermes. (There is also a package for Universal called ConnSBM_ORE2u.zip.)
And you say that you can make a ORE2cert.cab for Kaiser and if you do that then the password will be made?
If that is so, then that is great! But I have a feeling that you don't need a new ORE2cert.cab. The ORE2cert.cab for the Hermes and the ORE2cert.cab for the Universal seem to be the exact same file.

larsuck said:
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Click to expand...
Click to collapse
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Installed MMSlite and ended up having constant irritating reports that storage memory is full! No way MMSlite can occupy so much memory! Anyway, ended up having to hard reset. Once reset, this time I installed CE Star to provide japanese font support and then installed MMSlite. Worked a treat. Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something. Next is to find how to get access to the flat rate connection so time to dig the archives...
Any other fellow Japanese Kaiser users who can share some experiences?
Thanks Larsuck for the comments and tips....

dajtw said:
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Click to expand...
Click to collapse
Well, that's a bummer, but as Softcrank keeps their flat-rate settings top top secret, it was also to be expected.
Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something.
Click to expand...
Click to collapse
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Next is to find how to get access to the flat rate connection so time to dig the archives...
Click to expand...
Click to collapse
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.

larsuck said:
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
Click to expand...
Click to collapse
Thanks for the info relating to MMSlite; think I have build 275 so could give it a shot I guess.
My Kaiser did indeed have the joined SMS/MMS box prior to installing MMSlite; post-installation they're still joined. What type of trouble did you have just out of curiosity? I've yet to have any issues.
Bummer, thought there existed some means of generating the password etc etc using some really convoluted means of installation in xda forums? So I take it there currently exists no means of accessing the Softbank flat rate connection outside of using the original Japanese mobile? I thought there was a post that would auto-populate the password field after the convoluted setup?

Yes, there is a convoluted process like that. Unfortunately, it depends on an .exe file called WIFIwake.exe that is device specific. There is an .exe for the Hermes and one for the Universal - none for the Kiaser yet. If you would like to try either of those links, they are
here
If you have the knowhow to delve into an .exe file and make the right changes (I have compared the files and there are only two changes to make it seems), I know you will make more than a few people happy. Needless to say, I don't have any idea how to even start editing programs.
I have been searching, trying to find a work around for a couple of months now. At first, I had been looking for the password itself, but I don't know that it is such a good idea for the password to get out. That's what happened before, and in response Softbank closed down that access point and switched to the current one.
So, now I'm looking for a solution in the form of a .cab or registry hack - one that can be used on a wider range of machines. If and when I succeed, I will post to this form and you can give it a shot.
I tried two ROMs with the SMS/MMS joined mailbox. The first one was Black Satin, and on that ROM the SMS wouldn't send or recieve. I didn't even keep that ROM long enough to check MMSlite. The second ROM was T-Lite by edhass. That ROM had no problems sending and recieving SMS, but when I installed MMSlite it created a separate mailbox called MMS1. So, everytime I would go to send a MMS, it would automatically try to send it using the joined SMS/MMS settings and it wouldn't go through. So, it wasn't that it didn't work, it was just kind of a pain in the ass.

Hi!
ordered the TyTn II and, with luck, it should be with me tomorrow!
At the latest Monday before 1.00pm!
I am an absolute beginner with Windows Mobile, and yes, I will RTFM thoroughly and also search and search.....
But if anyone can help with like an Idiots Guide to Installing Japanese, I would be grateful!
larsuck, I have downloaded the files that you told me about, from the post on the 19th!
Good weekend for all!
Ofiaich

Patched WIFIwake from Chaimd
Huzzah! Huzzah!
Chaimd has apparently patched WIFIwake to work for Kaiser!
With this, Kaiser users should now be able to get the flat-rate Softbank connection working.
First, here is the thread where Chaimd first posted this info and the patched WIFIwake: http://forum.xda-developers.com/showthread.php?t=298031&page=11
Read it first, because there is something about CID-unlocking the Kaiser and memorizing the Pre-unlocked CID. I will alert Chaimd to this thread and hopefully he can answer questions.

Thank you, larsuck. I'll try to explain the working WIFIwake.exe on Kaiser, in my terribly poor English.
Now, we can connect to the flat-rate Softbank access point, to patch and sign WIFIwake.exe.
That WIFIwake works copmpletely on my Kaiser. But that method depends on;
Pre-Unlock CID must be known!
CID unlocked, I used Pof's Hard-SPL.
Patching WIFIWake.exe;
01C760h "KAIS1300KAIS1300", 16 chars in UTF-16.
01C784h Pre-Unlock CID, 8 chars in UTF-16.
01C798h Pre-Unlock CID, 8 chars in UTF-16.
Self-Signing WIFIwake.exe
To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file.
If you understand Japanese, you can get some informations of Kaiser & WIFIwake in this blog;
http://d.hatena.ne.jp/chai99/20071008

Now if you don't mind me asking, how do you use a non-japanese sim based phone on softbank with a data contract (not technically) but actually like go about it? As i go back and forth between japan frequently and in ~6 months will be moving there again for a year or two. Last time i lived there, I never had a mobile. Times change and now i need one for sure while there. I'd love to use a Kaiser that I have on hold at AT&T (can get it completely unlocked...). I thought they don't give SIM cards on there pre-paid phones...

@Philz,
If you get a cheap phone from softbank with a voice plan, you can use the sim card from that in your Kaiser. If your Kaiser is unlocked, the sim card should allow text and voice without messing with any settings. There is also a .cab program called Carrier Settings Wizard (or some such) that is floating around in the Hermes threads. It might be able to set up the (non-flat-rate) data settings for Softbank.
If you are a heavy data user and want a flat-rate data plan then, after signing up for one, you would need to apply the treatment that we are discussing here. However, from what chaimd says it doesn't sound easy.
Unfortunately, contracts from Softbank are usually for two years - not ideal for someone who is always traveling back and forth. Depending on how long you are in Japan, it might be cheaper just to roam here until you make the move.

@chaimd,
You said you used Pof's tool. Is your Kaiser Super-CID? It seems strange that the CID must be known if the device is Super-CID.
Also, you said:
"5. To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file. "
What is this Self-Signing CAB file? Do you mean the patched WIFIwake?
Or perhaps ORE2Cert?
Will the ORE2Cert from the Hermes package work with the Kaiser?

Hi, larsuck! I'm writing on Kiser through the flat-rate Softbank connection, now.
First: Is my Kaiser Super-CID?
Yes, my Kaiser is Super-CID. First, I checked "info 2" command, after the installation of pof's Hard-SPL. As WIFIwake works on my unlocked Treo750, and I jumped and thought "Yes! Super-CID! WIFIwake will work without patches!", ..... but it does'nt generate the password in real. Indeed, it is strange. I was confused.
We tried many many patterns of patching WIFIwake, but WIFIwake did'nt generate the pass, and we spent a few days. Finally, one of us found the right way! and we've got to the flat-rate Softbank connection. We found pre-unlocked CID was known to work WIFIwake on Hard-SPL Kaiser. I don't know why?
2nd: What is self-siging cab file?
The itamae's WIFIwake has already been signed by him to work without a ROM cooking. ORE2Cert, ore-ore-certification means self-sign certification in Japanese, is his signature to allow execute a previllaged code for WindowsMobile devices. But, if you patch the WIFIwake, WindowsMobile rejects it as a illeagal modified code. Then, you must re-sign WIFIwake, and install yor own Self-Sign-Cert.cab with your WIFIwake. You need to make your own Self-Sign-Cert CAB file. ORE2Cert.cab from the Hermes package does'nt work on Kaiser.
I described how to make Self-Sign files without VisualStudio in my blog. It's almost the minimum procedure of self-siging, but it's in Japanese.

mms missing on black6.1....reward for finding it 1,000 us dollars lol...

can i get some insight regarding the missing mms from 6.1, its making me angry lol

............................................
we are working on it
............................................

cookzitall said:
can i get some insight regarding the missing mms from 6.1, its making me angry lol
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1890481&postcount=1

I would assume, that you could install a different version of arcsoft mms, in order to fix it... bc it should just override the missing arcsoft files or whatever.
I also use mms on a daily basis. I flashed last nite and didn't noticed the mms prob until this morning... so when I get home tonite, I'll see if I can come up with something. But you should be able to search and find an arcsoft cab somewhere... if you do, try installing it. Obviously, we'd all like to find the newest version..
I found a post over in the kaiser forum about trying to extract version 5.xx of the arcsoft mms.. so hopefully that will solve our problems if someone is able to make that available.

thanks kamal, for sharing that...ill try to keep my acronym usage down for your sake...didnt mean to offend you or anyone else with "lol" im truely sorry i hope me and you can be bff someday and we will rofl about this..lmao lolol )
ohh and duprade, i tryed downloading arcsoft...but i had no success. maybe u kno if you have to copy some of the arcsoft files to directory or something bc my attempt to download it didnt solve the problem...
thanx in advance

Arcsoft_MMS_5.0.31.7.cab

someone ows duprade 1000 bux

found more problems...seeing if neone can relate
thanx a lot for the arcsoft cab..im gonna try it right now..
i ran into a few other problems tho...
1. the calendar soft key gives me an error HTCcalendar cannot be opened..but oddly enough i can open it through programs..but through the softkey it gives me an error...i tryed to fix it with the softkey changer but still no luck....
sms typing area or whatever u call it gets cut off..its some sort of glitch..
ne ideas?

cookzitall said:
thanx a lot for the arcsoft cab..im gonna try it right now..
i ran into a few other problems tho...
1. the calendar soft key gives me an error HTCcalendar cannot be opened..but oddly enough i can open it through programs..but through the softkey it gives me an error...i tryed to fix it with the softkey changer but still no luck....
sms typing area or whatever u call it gets cut off..its some sort of glitch..
ne ideas?
Click to expand...
Click to collapse
sms typing area = threadded sms = chat window like
calendar is called calendar.exe not HTCcalendar.exe. you have to cahnge the reghack for using softkeychange.

ok i found the registry hack for the calendar , sry for wasting space...but has neone had the chat window get cutt off ???

no money for duprade yet..MMS still doesnt work...when i go to send a mms it just hangs there and doesnt send.....what can be done?

cookzitall said:
no money for duprade yet..MMS still doesnt work...when i go to send a mms it just hangs there and doesnt send.....what can be done?
Click to expand...
Click to collapse
I'm guessing a soft reset didn't help matters for you, because it didn't for me. Somewhere somehow someone with figure out something

cookzitall said:
ok i found the registry hack for the calendar , sry for wasting space...but has neone had the chat window get cutt off ???
Click to expand...
Click to collapse
If you click the keyboard icon on the screen, this makes the reply window the correct size so you can see what you are typing. You can think resume normal typing once the window has enlarged...I am also missing my mms!

well, here's a cab that will setup your settings correctly for MMS ... but its still not working on my end... and im too tired to keep messing with it... but Im working with some other people on this .. so hopefully we'll get it solved soon.

i appreciate all the help..but where's the cab.? haha

duprade said:
Arcsoft_MMS_5.0.31.7.cab
Click to expand...
Click to collapse
I like the Itje's most recent rom release (6.1 black version), but reverted bacl to his previous rom release (ItsBlack) due to the stability, particularily the MMS issue. Would you or anyone else know the advantages or differences from this MMS cab's version over the HTC ArcSoft MMS 4.2.8.1?

the biggest advantage would be that arcsoft doesnt work! atleast not on 6.1black...i been trying to find some sort of solution...its really frustrating...but 6.1 black seems very stable to besides the mms issue....
has ne1 came close to finding the answer to our mms problem?

I love Black 6.1, and im dealing with the missing MMS (tho the dirty pics from chicks is sorely missed). Im just gonna wait since David and his "team" are working on it. They came thru with the keyboard fix....i have faith.
Quick side question (sorry to thread hijack as im in need of the MMS fix), how do you change the colors of the home icons?

What exactly is the issue with the MMS? It works on my ROM, maybe someone can compare the two's files and find out what's missing...

ivanmmj said:
What exactly is the issue with the MMS? It works on my ROM, maybe someone can compare the two's files and find out what's missing...
Click to expand...
Click to collapse
I have no option for MMS. From what Ive read its just missing from Black 6.1.

Tilt Japanese MMS Decoding issue

Hello everyone. I've read the classic japanese threads by Ofiach, Larsuck, etc.
I've read multiple Japanese input threads for the last year or so and I cannot find a solution to my problem
Current issue is japanese text will not display on incoming mms/sms. My emails are fine, be it gmail, yahoo, etc.
Currently I'm using a Tilt Stock Rom, WM6, Arcsoft 5.0.17(I've tried different ones)
I've read the classic japanese threads by Ofiach, Larsuck, etc.
I've changed registry values...nothing. It once worked where my mms where coming in full blown japanese no problem...
If anyone can help me out, it would be a HUGE help
I don't mind attempting to reimburse anyone for their help

I have my region set to Japan
I have a picture of my email displaying things fine and
I'm displaying what I see when I attempt to open a Japanese mms. I attempt to open "Ms. Yoko" mms and I get gibberish. The improperly coded message.
I'm not sure if I'm leaving any necessary information out
If so, let me know please.

Two things I can think of:
First, get Schap's Advanced Config and make sure you have checked the option that says "Support Unicode Messages" or something like that. You want to allow unicode.
Second, are you in Japan, or abroad? If the latter, then you might be screwed. Your phone obviously understands and is able to decode Japanese, but the servers in between your phone and your email might not be set to decode it. If this is the case then there isn't much you can do I think.

Hey Larsuck, I really appreciate your response.
Schnaps Advance config is good tool...thanks but unfortunately no luck with it.
I am between ATT/Softbank but recently I've been in the US on ATT and having such problems.
I guess its the server. ATT's server doesn't seem to use unicode. I say this because I can sms/mms myself and 日本語 is clear. めっちゃさやく！
Does it have anything to do with the registry? Like the 'accept charset' ? I thought maybe that could play a part.

RaW__ said:
Does it have anything to do with the registry? Like the 'accept charset' ? I thought maybe that could play a part.
Click to expand...
Click to collapse
Sorry I couldn't help you out. If it is AT&T's servers then there is really nothing anyone can do I think. Though you might call them and ask.
As far as messing around in the registry... I wouldn't advise it. If you do go digging around, make sure you have a good backup program and use it frequently. I can't count how many times I have messed up a perfectly good setup by trying to tweak things I didn't fully understand.

Blank EMails/Headers only...

Hello everyone...I searched and searched for this issue, and it seems that other people are having somewhat different problems, or they're related to a specific service (GMail, etc). For background: it's an ATT Tilt, running the standard WM6.1 ROM.
I'm having a problem with my EMail...it's downloading headers only...the body of the message is blank. I've already gone in and specified "Download entire message" in the settings, I tried deleting the account and recreating it, I turned the phone off (and removed the battery)...the whole nine yards. Could someone please tell me what the frak is wrong with this thing and how I can correct it? I don't know if it's a registry setting, corrupt file, or what...the fact that the problem recurs even after deleting/recreating the EMail account is truly frustrating.
In doing the research for this issue, I came upon someone who wrote a "Goodbye Kaiser" thread...I'm telling you, if there was a viable alternative phone with all the features I wanted, I'd be an inch away from joining him.

Superion said:
Could someone please tell me what the frak is wrong with this thing
Click to expand...
Click to collapse
Sorry, I don't have an answer for you, but I must support someone who brings BSG lingo into everyday life.
Damn toasters.....