Does anybody has the original ROM that shipped with O2 XDA IIs from O2 Asia? I tried to search through this web site but I couldn't find the original one. I found only the upgraded one. I already contact O2asia but they refused to give it to me.
Depends what you mean by "Original" The following link will have the latest official ROM for the O2 XDA IIs, but if you are after an earlier version then you may have a problem.
http://www.seeo2.com/support/template/RomUpgrade.vm
Can I ask why do you need this?
you see this link
http://www.mwg.com/xda-iis_servicemenu.aspx
email: [email protected]
DT: 0988234169
xda iis ph20b
rom version: 5.60.00 wwe
rom date: 03/02/05
radio version: 1.06.00
protocol version: 1337.38
Something wrong after upgrade to the latest ROM
Yep, the one that I need is the original one that comes with the phone. So, it's the earlier version, not the latest upgrade.
The reason why I need the ROM is because after I upgrade to the latest one (posted on the MWG, SeeO2, or here), my phone stop working in my office which located in a basement. It used to work fine before upgraded. BTW, it works OK in most places.
So far, I have tried to upgrade/downgrade the radio ROM. I tried almost all of them, 1.02.00, 1.06.00, 1.08.00, 1.10.00, 1.12.00, 1.13.00, and 1.15.00. No luck, they gave me the same result, no signal in my office. Today, I compared my phone and the other phone under the same carrier (cingular/AT&T). My phone kept saying "No Signal", but the other have almost full signal strenght. I can use the other phone to call without any problem. I did try to soft reset but it still couldn't find the network (no signal).
That's why I would like to try the original ROM that I used to have before I upgraded. Just want to make sure that the latest updated ROM is not the cause of my problem. For the original ROM, I think it should be as follows:
CE Image Version: 1.31.00
Extended Image Version. 1.31.920
Radio Image Version 1.02.00
Or if you have any suggestions, please let me know. I willing to try everything just to make this phone work in the most important place for me...my office.
Related
Hi,
Little intro..New O2 convert here. Was a P910 user.
I was wondering whether I could get an upgrade as I have been getting these glitches:
1) Caller ID photos is unstable.. i.e. occasionally shows caller photos..
2) Hangs occasionally
My version:
ROM version: 1.12.62 WWE
ROM date: 10/04/04
Radio Version: 1.02.00
Protocol version: 1337.32
ExtROM Version: 1.12.925 WWE
Can anybody help me?????
Well, it seems that we're a little bit out of luck. The official upgrade from O2 is still for UK region only, Asian upgrade probably not that long on the road, just be patient for a while (although I'm starting to get annoyed myself with all this unstability :? )
Hangs occasionally? Mine restarts itself occasionally...
Upgrade of CAller ID software??
Is it possible to upgrade the Caller ID software I have now to a "stable" one? I am having the version 1.17..
Upgrade of CAller ID software??
Is it possible to upgrade the Caller ID software I have now to a "stable" one? I am having the version 1.17..
Midi_Amp said:
Well, it seems that we're a little bit out of luck. The official upgrade from O2 is still for UK region only, Asian upgrade probably not that long on the road, just be patient for a while (although I'm starting to get annoyed myself with all this unstability :? )
Hangs occasionally? Mine restarts itself occasionally...
Click to expand...
Click to collapse
I have a Asia IIs and just came back from service center. They upgrade the ROM for me (I didn't ask for it).
Here is what I got
ROM Version: 1.31.00 WWE
ROM Date: 12/13/04
Radio version: 1.02.00
Protocol version: 1337.32
ExtROM version: 1.31.920 WWE
Hangs occasionally? Restarts itself occasionally? Mine hard reset itself occasionally...
Same here
I'm also having the auto hard problem, after sending to O2 service centre the same problem happened again...
They claimed that is a 3rd party software problem.
Yatlee,
Is it possible for you to upload your latest ROM and extended ROM as I have an O2 Hongkong XDAIIs and can probable use yours since O2 UK ROM does not work.
"Is it possible for you to upload your latest ROM and extended ROM as I have an O2 Hongkong XDAIIs and can probable use yours since O2 UK ROM does not work."
How to do it?
Well, My story goes like this: I came to this website which is great resource. Like many others here, I tried using some of the upgrade posted here. I was very careful and just want to try out the radio upgrade, but not the other ROM, ext-ROM stuff. I upgraded to 1.06.02 from the FTP server. My unit was stable before the upgrade. After the upgrade, I got constant call (out or receive) without sound. I had to soft reset to have the unit go back to normal. Even after I went back to 1.02 (again download thru FTP server), I had the same problem.
I called O2 support. They said it's external software problem. Of course, I did tell them I flash the Radio ROM myself. I was about to give up my XDA all together. I sent it into the repair center. When I picked up the unit, they said everything is normal, but they upgrade the firmware. So far, after two days without soft reseting, my unit is still stable and no more call without sound. I swear I will not tinker any new firmware unless it is release for Asia O2 XDA IIs. It's too much pain.
Another thing, the FW I got does not have O2 active which has reported to be a piece of trash anyway.
Upgraded BT to 3900
I'm also wary of updating my unit with ROM that's designed for other countries. That's why I'm waiting patiently for the ROM update for my unit which I bought in Malaysia.
The only thing I've messed with is upgrade my BT from 3500 to 3900. I did that because I couldn't get my Sony HBH-660 headset to connect. Since I updated BT, my headset works properly now albeit with a few hiccups.
hi yatlee,
may i know what're the rom specs u have right now?
Excellent upgrade for me!
I'm from Malaysia and recently has bought an XDA IIs with the 1.31.00 WWE ROM (Rom Date: 13 Dis,2004), Radio Version 1.02.00, Protocol 1337.39, Bluetooth BT-PPC/PE Version 1.0.0 Build 3500, and extROM 1.31.920 WWE. My unit always hang from time to time aspecially when I put various kind of softwares on it. But 3 days ago I've upgraded it as below:
1. Radio ROM: 1.02.00 WWE to 1.08.00 WWE
2. Caller ID: 1.17 to 1.20
3. MMS Composer: 2.0.0.13 to 2.0.0.16
4. ClearVue: 2.4.381 to 2.4.386
Outcomes:
1. It doesn't hang anymore (3 days of uses).
2. Good network signal reception
3. Faster respond.
Now I'm waiting for better ones.
The Radio ROM is downloaded from xda-developers.com ftp with the name KPN_Rom QTEK 9090 Radio 1.0.8.
Sorry for bad English.
My specs...
I've also updated the RADIO with the KPN version. I found out later it's only an upgrade for the GSM module.
Can somebody post this asian xdaIIs ROM here????
Thanks very much in advance.
Cheers,
radio 1.08, really works. Better performance of my IIs now, especially when taking with others on phone.
yeap same here. b4 i upgraded to radio ver 1.06.02 but always get mute when answering calls. been good after upgrading to radio ver 1.08.00, but still waiting for a BT patch
Some people pls try the following method for uploading the ROM.
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
Thanks very much.
Cheers,
Re: Excellent upgrade for me!
cyphol said:
I'm from Malaysia and recently has bought an XDA IIs with the 1.31.00 WWE ROM (Rom Date: 13 Dis,2004), Radio Version 1.02.00, Protocol 1337.39, Bluetooth BT-PPC/PE Version 1.0.0 Build 3500, and extROM 1.31.920 WWE. My unit always hang from time to time aspecially when I put various kind of softwares on it. But 3 days ago I've upgraded it as below:
1. Radio ROM: 1.02.00 WWE to 1.08.00 WWE
2. Caller ID: 1.17 to 1.20
Click to expand...
Click to collapse
3. MMS Composer: 2.0.0.13 to 2.0.0.16
Click to expand...
Click to collapse
Hey cyphol... Could you please check your MMS composer version by going to MMS Settings>About tab to see what version is shown on yours? I ran the 2.0.0.16 update cab without any problem but the version on my about tab still shows as 2.0.0.13... was wondering if any body had the same problem
4. ClearVue: 2.4.381 to 2.4.386
Outcomes:
1. It doesn't hang anymore (3 days of uses).
2. Good network signal reception
3. Faster respond.
Now I'm waiting for better ones.
The Radio ROM is downloaded from xda-developers.com ftp with the name KPN_Rom QTEK 9090 Radio 1.0.8.
Sorry for bad English.
Click to expand...
Click to collapse
02inCN said:
My specs...
I've also updated the RADIO with the KPN version. I found out later it's only an upgrade for the GSM module.
Click to expand...
Click to collapse
Hi O2inCN, six, leochan2005, yatlee,
Have you backed up your ROMs by SD method? Can you load it into the ftp please?
Thanks very much.
Cheers,
Yeah i need it too! pls upload your latest Asian !!
To start with I have had my xda iis only a few days. The roms is:
ROM version: 1.12.62 WWE
ROM date: 10/04/04
Radio version: 1.02.00
Protocol version: 1337.32
ExtROM version: 1.12.178 WWE
There are numerous comments on here and the wiki about different rom and radio updates. Could anyone sum up the benefits and differences for me if i upgrade rom or radio please?
Can nobody advise a newcomer to xda iis and these forums? On other subjects I've had a really good response but nobody seems to want to advise me on this thread.
martlewis - you know there's a new ROM out, everyone's busy trying that out! Windows Mobile 2005. If you feel confident in doing a backup, try that one. It's got serious issues to be resolved, but you're lucky enough to own a device that can be upgraded.
I've got a magician, so can't help re your specific rom.
V
martlewis,
If you can wait for the new ROM WM5 to be developed it will be OK for you, but if you can't I would suggest that you should up-grade to the latest available ROM up-date which is as follows:
ROM version : 1.40.00 WWE
ROM date : 03/10/05
Radio version : 1.13.00
Protocol version: 1377.42
ExtRom version : 1.40.176
This is the best performing ROM version as at now.
Regards
sorry for my intrimission!
I have a pda2k with italian rom, but I would to like to have the system language in english.
To upgrade the rom: I must download the version 1.40.00 WWE from wiki and then run the update using: MaUpgradeUt_noID.exe.. right?!
Dear Mart...
I have tried the new ROM which I've been waiting for a long time. Once installed, I liked it. Howerver, I started to find out that there are many problems that I'm not used to with WM2003 SE, therfore, I downgraded to WM2003.....until these issues are resolved. SO.... if know how to upgrade, and if you know how to downgrade in case you didn't like the new ROM......Then give it a try......apart from the issues it has....still I like it. Finally it's another new Microsoft Windows that will take some time to get stable.
Cheers
I decided to wait for the official new ROM to be developed and published on the I-mate site to download and up-grade.
What's happening now is just trials for resolving the problems users are facing with the new WM5 ROM.
My device is working fine now with the 1.40 ROM version and 1.13 Radio version.
The only problem I'm facing is the statics in BT headset and I hope that we can find some solution for this problem in the near future, otherwise everything is going just fine.
Regards
Closer said:
sorry for my intrimission!
I have a pda2k with italian rom, but I would to like to have the system language in english.
To upgrade the rom: I must download the version 1.40.00 WWE from wiki and then run the update using: MaUpgradeUt_noID.exe.. right?!
Click to expand...
Click to collapse
Closer,
I think that you have to simply download the english version and install it to your PDA2K through the computer cable. After the installation is complete, you will be having the english version installed on your PDA2K.
Regards,
Anyone can extract out the .cab file for the BlackBerry connect 2.0 for the XDA IIs or IIi for the latest 1.40.xxx ROM
Want to try it locally in Singapore to see if it works
Thanks a lot....
Any can help to extract the cab file? Thanks....
It's on the ftp, just uploaded it to /Uploads/BlueAngel!
HTH
Fin
Thanks, you have been a great help. Appreciate it.
notepad said:
Thanks, you have been a great help. Appreciate it.
Click to expand...
Click to collapse
Hi notepad, I supposed the cab even installed on ROM other than the official ROM (radio and ms) will not work. This is because RIM checks on the use of right version before it allows the connection to go through. This is the case even for XDAII (which will only work for 1.72)
I have upgraded entirely to their O2 UK version and BB is working perfectly fine for my XDAIIi now in Singapore.
Yah, I am using the Offical 1.40 from 02 Asia version with radio ROM 1.12, the device is able to generate my PIN, so it is more that sufficient to subscribe the service right.
notepad said:
Yah, I am using the Offical 1.40 from 02 Asia version with radio ROM 1.12, the device is able to generate my PIN, so it is more that sufficient to subscribe the service right.
Click to expand...
Click to collapse
Perhaps I was not clear enough in my previous mail. Blackberry Connect should only work with the version it is released together with and no just any official O2 release. This was the case for XDAII.
In this case for XDAIIs, the version should be v1.40.237. Well, in any case, it's worth a try. No harm done right? Good luck!
actually the 1.40.xxx at the back is the extended ROM function, the core ROM is 1.40. I believe that as long as you use 1.12 ROM it should be ok.
My Device Info are
ROM: 1.40.00 WWE
ROM Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1.337.42
ExtROM Version: 1.40.923 WWE
What about yours?
notepad said:
actually the 1.40.xxx at the back is the extended ROM function, the core ROM is 1.40. I believe that as long as you use 1.12 ROM it should be ok.
My Device Info are
ROM: 1.40.00 WWE
ROM Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1.337.42
ExtROM Version: 1.40.923 WWE
What about yours?
Click to expand...
Click to collapse
I am using XDAIIi, not XDAIIs.
ROM: 1.11.00 WWE
Radio: 1.00.00
Protocol: 1337.39
ExtROM: 1.11.169 WWE
would someone be kind enough to post the link to the blackberry cab file. Either I'm being stupid or I'm experiencing problems with my XDA Exec.
Thanks
The cab i put on the ftp was for XDA IIs and XDA IIi, I would be very surprised if it would work on Exec.
Log into the ftp with xda as both username and password and go to uploads/blueangel and you will find it there.
HTH
Fin
Got it working with an XDA IIs, connecting to a BlackBerry Internet Service in Singapore ( StarHub ).
Works perfectly.
I have read this
having read this thread do I understand correctly that BB wil not work on wm5.....
Is it possible, plus will it work for uk phone .
I have xdaiis with wm5 on O2
Thanks
findus said:
The cab i put on the ftp was for XDA IIs and XDA IIi, I would be very surprised if it would work on Exec.
Log into the ftp with xda as both username and password and go to uploads/blueangel and you will find it there.
HTH
Fin
Click to expand...
Click to collapse
I'm no techie but I'm interested to upgrade my XDAiis with blackberry capabilities. Can you teach me please? I tried accessing the FTP site but no can do. Appreciate any assistance.
Thanks.
BB Clients for WM5 are currently being tested by various providers such as O2. Only a matter of time now before they will come out. My hunch is around the end of 2005, early 2006
Which is the right cab?
Hi,
I've browsed around /BlueAngel and found two BBConnect cabs. The English version is 1.2 and doesn't generate a PIN. The other version is German 2.0 which does generate PIN.
Is this the version that we uploaded? As I don't understand German, can you please upload the Cab again?
Thanks so much.
I had problems with the installing of the BB service file when I upgraded my Radio ROM from 1.12.00 to 1.13.00, so i down graded again,
I could be wrong but...
I don't think anybody ever got this to work on anything other than the standard T-Mobile or O2 phones.
It's a lost cause -- I wasted countless hours on it, and I hope I save you from doing the same...
Thanks for the tip... Not too surprised as not many people claim to have got it working. Wanted to "repeat" Notepad's "success" since I'm also in Singapore.
Actually, I tried the German version last night. But SingTel's BB registration page rejected the PIN and IMEI I gave it.
All I want to do is get my QTEK 9100 to work with my new Parrott MK6000 hands free kit so that I can stream music through my car speakers. Parrot have told me on their forum:
http://www.parrot.biz/forums/english/viewtopic.php?id=3759
to update to the latest ROM for my device. Is there an issue with audio streaming with the QTEK 9100? I think I read on one of these threads that there was, hence the reason I am trying so hard to update.
The device info for my QTEK is as follows:
ROM Version: 2.17.7.2
Rom date: 2/10/06
Radio Version: 02.07.10
Protocol Version: 413.1.03
ExtROM Version: 2.17.7.102
I have been reading this forum for ages now. I have unlocked my CID (even though the device is G4 and I now understand that that was not necessary) and I have tried to update to the ROM on this thread:
http://forum.xda-developers.com/showpost.php?p=1172977&postcount=361
but have recieved an error 300 message.
Is that because that ROM is not compatiable with my PDA?
If that is the case, is it only the ROM's on this page
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
that are compatiable with the respective phones and if that is the case then I must have the latest ROM and can not upgrade any further?
I would like to have the very latest ROM (just to be flash) and have therefore set my computer to retrieve the seed for Faria's latest ROM version on this thread
http://forum.xda-developers.com/showthread.php?t=291806&page=85
is that going to work or am i wasting my time?
Any help would be really appreciated and I am sorry if I have missed something whilst scanning this forum.
there are a bunch of roms out there , seems like everyone has there own cooked version.
It is possible that your pda/phone doesnt like that rom version.
Try finding another rom image?
jeff
Can anyone recommend one that might possibly work? Its just that its difficult to tell from all the different ones out there. Also does the Rom Image have to be specific for my phone or will any do?
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://www.htcwiki.com/
Hi All, I have had a search and can't find the answer to my question. I am about to flash my HTC Touch HD to Dutty's new 6.5 R8 ROM and I wanted to make sure I can go back to my default incase I either don't like it (which I doubt after reading everyones posts) or the phone has to go back for warrenty.
I have found some original ROM's on Dutty's site but the version numbers don't look like they match. mine are as follows
I am on Orange and in the UK
Operator Version: 34.119.1.611
ROM Version: 1.19.61.1 WWE
ROM Date: 11/25/08
Radio Version: 1.09.25.14
Protocol Version: 52.49a.25.26U
The closest one I found on Dutty's site is BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.25.26_1.09.25.14 or RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14
If I restored either of these would I still be ok on the warrenty front? or is there away that I can extract my currently installed ROM and then restore it if needed?
Any help would be greatly recieved.
Try http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Brilliant Thanks. There is a closer match there but still nothing with a complete match. If I send it back can they tell from the serial number what versions should be on there? or is there a particular version that is more important than the others? i.e. the ROM version?
there is a release of a newer rom than yours on the htc site
so i guess that if you had that rom installed and your hd needed to go back under warranty then you should be fine as it can be considered an official update by the manufacturer
http://www.htc.com/www/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
Thanks, I didn't realise that HTC released ROM's for download. Thanks for both of the replies. Much appreciated.
As long as you have an official HTC upgrade rom on your device you will be fine for warranty
Thread closed