Hi there,
I got a problem which I would like to share with you. When using skype with a GPRS conn, the program do not initiate a connection. If it is using WiFi, then it works with no problems. If I have initiated a GPRS conn with some other program, i.e. browsing with my opera browser, then skype connects with no problems to the allready initiated GPRS conn. What can cause this?
Thanks in advance.
skype over gprs?
would this even work, skype needs a broadband speed connection to work and skype do not support calls over gprs, maybe this is why
Skype will only work over wifi or 3G, it will not work over GPRS.
Radeon123 said:
Skype will only work over wifi or 3G, it will not work over GPRS.
Click to expand...
Click to collapse
3G or HSPDA - just the same. Skype do not initiate any conn. To be able to log in I must, at first, start a browser, open a page, keep the conn alive and then to log in with Skype
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Steve-C said:
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Click to expand...
Click to collapse
Yes, I have selected both WiFi and 3G and I see the screen warning me that Skype is going to use a 3G conn. The problem is that Skype do not initiate any conn, just use any if it is already initiated. WiFi conn is switched on manually by the user, not Skype. Same is with 3G - it must be initiated previously from some other program and Skype just uses it. Further more, if 3G conn is closed while using SKype, then Skype can not initiate it again. All this is too strange for me. I uninstalled Skype, deleted all files connected with it, checked registry for strings that might be in use from Skype, then installed it again and nothing changed. I have no other installed programs for handling internet connections, just those that come built in with my PPC.
I had this problem with another program that wouldn't initiate the connection. I checked my connection settings, and it was set to automatically dial MEdia Net (since i use AT&T) and I switched it to automatically dial My ISP GPRS and ever since, my programs have been dialing fine.
hey man i had the same issues i went in to conection settings and changed them to media net becouse thats what i use thats in conections then conections advanced select networks i also disabled my proxy in conections 2 and it worked for me dont know witch one of those did it for me but that should get you in the right direction
Yeah, you have to select media net as default, and disable the proxy.
The proxy is the one that's preventing you from connecting. Other programs figure it out but some don't bother and can't connect.
hey sorry if i'm hijacking ur thread but
I was curious if anyone knows about this. I'm not using a 3g connection as well. My skype gives me the option of using a "cellular" connection, but it doesn't show it connecting to my edge or gprs. I was curious as to whether anyone know if it's edge or gprs? (trying to find out if it's using minutes or whatever.. a connection besides edge n grps)
Thanks for your time
Related
Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F
Hi all,
Got a stange issue. I have the MDAcIV (basically a diamond) on the UK T-Mobile contract.
I've setup my Gmail account to send/retrieve and over wifi it works perfectly, however if I disable my wifi connection, I expect the email to sync over GPRS, but I keep getting a sync error saying check your connections etc.
Anyway checked all my connections and it works fine over GPRS in browser, weather, and any other app requiring internet connection, just not email.
Gone through the email settings and under advanced server settings, under Network Connection it's set to "The Internet".
If I change this to "T-Mobile Internet", and then try to sync with wifi OFF, the GPRS kicks in and starts syncing.
I then stopped the GPRS connection, switched on wifi, and tried to sync again, but instead of using the connected wifi, it starts a GPRS connection.
Strange!
So in summary:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Anyone else have similar experience?
Thanks
I got a similar one:
I'm using Active Sync via HSDPA/GPRS to get my mails pushed (Exchange 2007 Server). Works like a charm and never have problems with it; used it for years with other WiMo devices.
Now, since I have my diamond (MDAc4 also) I can finally use WiFi, too. What I now experience is:
When I turn on Wifi, my cellular connection (HSDPA) stays active and when I turn it off manually via the comm manager it also turns off "PushMail" in comm manager. That basically sets active sync to "manual" instead of "when items arrive".
Though I am able to turn on push mail in comm manager again, as soon as an email arrives it starts to connect HSDPA again.
So basically I can not use wifi to save some MB of my data plan when I want to continue to get my emails. And this really sucks...
Only thing I can set up in the advanced connections in Active Sync is "Connection" where my only option is "Internet" -.- Meaning I can not differ between cellular and wifi. It kinda has to use the cellular connection...
long story short, dunno if that helps you with your problem now, sorry; but if anyone understands what I am talking about right here, maybe send me a pm or something, if you know how to fix that.
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Click to expand...
Click to collapse
Definitely had this happen a fair few times, with the gprs failing to connect once or twice, and I've seen it on most of the roms.
I think WM doesn't set it's connection type correctly, so we don't get the seamless "use the best/cheapest/fastest connection available"
In fact, anyone know of any app that would just do that? As in try to connect to unsecured or secured wifi, followed by 3G/HSDPA, followed by GPRS?
patelr said:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Anyone else have similar experience?
Click to expand...
Click to collapse
I have exactly the same problem. If I want to get my e-mail the account setting has to be "T-Mobile Internet" unless I'm using wi-fi in which case I have to switch it to be "The Internet". Anyone know of a solution?
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
TJ72 said:
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
Click to expand...
Click to collapse
Thanks for the reply. It could be but the phone doesn't even attempt to connect to mobile data it just pops up an error to say it can't connect with the existing data settings. Its not a T-mobile supplied handset although it did configure itself to use T-Mobile when I first put the SIM in.
Solution
After research and research I´ve finally found a solution. I´ll post some pictures of my settings so you can see yourself what you have to do.
The clou is to have only 1 connection for Wifi and GPRS/3G. WM now firstly checks if there is a Wifi connection and if not, it will connect to GPRS.
Got It
Just untick the box that says "This network uses a proxy server to connect to the internet" in the manage t-mobile Internet connections app.
Now works over Wifi if available, if not uses GPRS/3G
I am trying to setup my Diamond so 3G only connects when I want it to. I've added the 3G button to the comm manager. Even with this set to off it reconnects when the web browser is opened.
I also have the advanced config manager installed with the Auto GRPS set to disabled but still the 3G connects automatically.
Does anyone have the same problem and/or know a fix?
It will connect whenever anything requests data, as far as I know, there's no way to stop this.
Thought there may be a hidden setting maybe in the registry that could stop this. It is annoying that the comm manager says 3G is off yet there is data connection after loading up the browser. And I'm sure it just connects even without actively requesting a data connection through the browser.
What happens when you set both options in Connections to use "My Work Network" and set your WLAN as your Work Network?
use no data
then this way you don't start it unless you want it to
hope this helps
liamhere said:
then this way you don't start it unless you want it to
hope this helps
Click to expand...
Click to collapse
Use no data? Am I missing something or is this as simple as it sounds!? Are you suggesting that by not using programs requiring data then I will not activate the 3G connection?
It certainly is a shame that upon activating a program requiring a data connection that you cannot select the source of this data ie. 3G, wifi etc or just cancel the request entirely.
if you want it to use wifi, simply connect to wifi before you launch the application. Windows Mobile is very different from Symbian in that way (Symbian will ask for each app).
Hi,
I have a problem with the GPRS and Wireless connection. I am using Windows Live mail and and set it up so it is manually synchronized! Same with other mail accounts.
But, every time I connect to the internet using wireless and then press Send/Recieve, it keeps opening GPRS and use it to retrieve new e-mails and ignores my wireless connection!!! Which is really annoying.
How do I fix that?
I have exactly the same... but then with internet sharing with my laptop... keeps using my gprs/3g instead off the wifi that is 100 times faster.
annoying
and it is really annoying as you said, it is much faster with wifi and for people like me where I do not have monthly GPRS data included, it's really annoying and costs a lot.
Earlier, I had my e-mail to automatically download new emails daily and suddenly, I got a huge phone bill because of that problem!! So, e-mails are downloaded manually now until I fix the problem!!
You can find the answer here:
http://forum.xda-developers.com/showpost.php?p=2615010&postcount=10
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
yes but
Yes but chaning preferences for my network would result in not having my mms working, or gprs when I need it?
However, I have to go back to settings and change everything again to get things to work!!!! I would rather have a solution than a workaround
not working
programatix said:
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
Click to expand...
Click to collapse
I tried your solution but the phone tries to connect using MMS connection and of course windows live mail fails to download emails even though my wifi is on and connected!! It just ignores the wifi??
nodata by Paul @ MoDaCo
nodata
iRiKi said:
nodata by Paul @ MoDaCo
Click to expand...
Click to collapse
Have you tried NoDATA with HTC Diamond with WM6.1?? NoData seems to be an old cab file for older versions of WM?
I am an amatuer with xda, as well as my pocket pc (I have the htc fuze{touch pro for att}), however I enjoy both and am learning more and more all the time about both. However I have not been able to find this, and was wondering if such a thing existed: a program to toggle between wi-fi and internet for other programs. You see, I don't have a data package, and don't like to pay for the internet. So I was just wondering if anyone knew of a toggle for something like that.
I'm in the same boat. I use this, and have it mapped to the PTT button. Works great.
I cliked the icon and it turned on my wifi. Is that all it does?
nbower said:
I cliked the icon and it turned on my wifi. Is that all it does?
Click to expand...
Click to collapse
Isn't that all you wanted?
DrzNight said:
Isn't that all you wanted?
Click to expand...
Click to collapse
Not really, don't get me wrong, I will use that app on my ptt button too because it is very useful, but I was looking for an app to change other programs kind of. It seems like other functions on the phone, such as downloading a MMS, or updating your email inbox require the internet. I didin't know if stuff like tat could be changed to wi-fi instead of the data connection
Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!
Eric03 said:
Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!
Click to expand...
Click to collapse
Yeah, that does, thanks a lot!
My experience with nodata have not been all that good. Since the wifi reciver is pretty weak I find that if I fall out of wifi cover the phone will connect with 3g even if I'm running nodata.
If anyone know about a program that both activates wifi AND deactivate all other means of internett connections that would be great. I'd rather surf for free on a wifi connection that have a low signal than to pay for surfing with 3g.
I'am also searching for such a solution. I use Exchange server sync for my contacts and appointments. This sync should not go over the Mobile Internet connection, i need it only in our intranet by using WLAN/WiFi
Regardless if WIfi is enabled or not: The Touch Pro tries to connect by Mobile Internet to the Intranet-Server(!), this fails, of course. When i disable the Mobile data connection on the connections settings tab, anything is fine.
In the advanced settings of the exchange server config, i found a drop down box for the connection. But all it shows is "Internet" meaning the mobile connection. The office/business connection (=intranet config) is not available there...