MS VoiceCommand over BT Headset - Tilt, TyTN II, MDA Vario III General

Alright, I'm probably going to get flamed to high-hell for this one, but I know someone must do this, and I did a search but it matched on a whole crapload of posts, and I didn't want to go through every single page, so sorry.
Anyway, I have a bluetooth headset and MS VoiceCommand 1.6. I'm trying to make it so that I can give voice commands (such as calling someone) over the headset, and possible hear the announcer over the headset as well. Can someone PLEASE steer me in the right direction.
TIA

Not sure what you need. Install it, make sure your headset is paired, either activate voice command on the phone itself and give instructions (I have mine mapped to "hold PTT - Button 6") OR when I push my multi function button (Blue Ant Z9), the voice command beeps...I then state "Call John Smith" - Voice command responds with either "Call John Smith?" (If I have only one number for Smith) or "Call John Smith Mobile or Business". Then answer the question either 1) yes or 2) mobile. Voice Command dials. You can find all the available instructions in your documentation or at the Voice Command site. Let me know if you have any other issues. I'm a total newbie and it was pretty easy to get used to it and I love the program now.

yeah you would think it would be that easy, but I just cannot get it to work. The BT works, and VoiceCommand works, but they don't work together....strange.

Yep, was 'automatic' for me too. as soon as i recorded voice tags for my contacts i just hit the command button on the headset, wait for the prompt and say the name. it is played back and then the number dialled.
sweeeeet.

quote from another post here:
"Here is what I did:
1. Open BT Voice Command Config from Programs. Uncheck XCSdm
2. I put in 2 strings under HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand
Default = "\Program Files\Voice Command\voicecmd.exe"
Path = "\Program Files\Voice Command\voicecmd.exe"
I put "" around the strings - and the voicecmd.exe is SMALL case voicecmd not VoiceCmd.exe
3. Deleted the other keys under VoiceCommand
4. deleted the BT headset pairing - the paired jawbone headset again... perfect.
;-)
Don't know if you need both reg entries... but it is 5 am here... i have been up all night trying to fix this... Happy now."
http://forum.xda-developers.com/showthread.php?t=333260&page=15

schwags said:
yeah you would think it would be that easy, but I just cannot get it to work. The BT works, and VoiceCommand works, but they don't work together....strange.
Click to expand...
Click to collapse
Sorry for the totally simplistic answer. Thought you just didn't get how to work it (been working with someone who is totally clueless on this locally). I think the above thread should provide the help for you. Also, try a reinstall. Mine wasn't automatic at first. When I reinstalled after I flashed my first ROM, worked fine.

I had some problems at first getting voice command to work with my bluetooth headset. If you paired your headset before installing voice command, unpair and re-pair the headset with the phone. Hopefully that will work. Also, make sure your phone isn't set to vibrate or mute. This may cause voice command to work, but you can't hear the voice prompts.

Try the Bluetooth extensions from JetWare. I have seen that take what I considered to be a useless headset into one that works quite well.
I have been thru MANY dozens of headsets and I have come to the conclusion that in this case more than most...you get when you pay for.
Hence, I have the Jawbone and the Sony Ericsson HBH DS980. Both work great.
Brad

Brad- I am also have a ds980. It works fine with voice command. However I have problems in that it often seems to drop the bluetooth connection after a call or as I am initiating a call. I can press the play button and it eventually reconnects. It works fine for listening to music and never just drops the connection. Have you had any issue with this? If so what did you do to resolve it?

Alright, just got it working guys! The post above from kaluzu doesn't fully work, however it contains the original post where I found the full fix. First I did what was in the kaluzu post.
And then I did this:
Originally Posted by Edvard_Greig
Hallelujah! I finally figured it out- so it did have to do with the XCSDM setting I believe... so here is what I did for anyone else that is wondering:
1. Installed MSVC 1.6 (from the link in the TNT ROM posted earlier)
2. Soft Reset
3a. Made registry change to set Path = \Program Files\Voice Command\voicecmd.exe (no quotes)
3b. Change button assignment (assigned to Button 6/PTT in my case)
4. Soft Reset
5. Enable XCSDM
6. Soft Reset
7. Disable XCSDM
8. Soft Reset
9. Pair Bluetooth Headset
It seems to be working...the best I can figure is that when it initially gets installed the XCSDM doesn't have any value at all, but by enabling it, and then disabling it, it actually turns it off as opposed to having a null value. Also note that since I am using Alex's 'UltraClean' ROM, there were never any Cyberon installation traces, and therefore I ignored those sections.
In any case it seems to be working great and I'm very happy.
Thank you everyone for all your help, and hopefully what I listed above will help someone else.

Related

No Voice Command audio after A2DP connects

This is one of several problems with my AT&T Tilt. My 30 day return policy ends November 8, so I'm trying to figure out which problems are specific to my phone and which are just Kaiser in general.
Voice Command on my Tilt works great via Bluetooth hands-free mode to my Parrot MK6000. I push the MK6000 Talk button, VC chimes over my car speakers, says the name I'm calling, and asks if I want home, mobile, etc.
The problem is that after I make the A2DP connection to the MK6000, the Voice Command audio prompts do not play if I use the MK6000 Talk button. Even so, the icon displays on the menubar and it accepts voice commands, but without the audio prompts, I don't know if it's dialing the right contact and/or if I need to say "Yes/No" or "Mobile/Work/etc." unless I pull out my phone and look at the screen, which is inconvenient and dangerous while driving down the highway and defeats the purpose of hands-free mode. Never had this problem with my 8125 and the same MK6000.
The prompts do play through the MK6000 after A2DP connects if I use my mapped Voice Command button on my phone itself, but again, that requires pulling out my phone.
This happens with both Voice Command v1.60.4622.0 (my original) and v1.6.17913 (announce patch) on Helmi Kaiser Dynamic Big Storage. Not sure if it happened on stock AT&T Tilt ROM.
Anyone's Voice Command audio prompts missing after A2DP connects?
BennTech said:
This is one of several problems with my AT&T Tilt. My 30 day return policy ends November 8, so I'm trying to figure out which problems are specific to my phone and which are just Kaiser in general.
Voice Command on my Tilt works great via Bluetooth hands-free mode to my Parrot MK6000. I push the MK6000 Talk button, VC chimes over my car speakers, says the name I'm calling, and asks if I want home, mobile, etc.
The problem is that after I make the A2DP connection to the MK6000, the Voice Command audio prompts do not play if I use the MK6000 Talk button. Even so, the icon displays on the menubar and it accepts voice commands, but without the audio prompts, I don't know if it's dialing the right contact and/or if I need to say "Yes/No" or "Mobile/Work/etc." unless I pull out my phone and look at the screen, which is inconvenient and dangerous while driving down the highway and defeats the purpose of hands-free mode. Never had this problem with my 8125 and the same MK6000.
The prompts do play through the MK6000 after A2DP connects if I use my mapped Voice Command button on my phone itself, but again, that requires pulling out my phone.
This happens with both Voice Command v1.60.4622.0 (my original) and v1.6.17913 (announce patch) on Helmi Kaiser Dynamic Big Storage. Not sure if it happened on stock AT&T Tilt ROM.
Anyone's Voice Command audio prompts missing after A2DP connects?
Click to expand...
Click to collapse
I have the same problem with the iTech headset.
Thx saint. So it's not just mine.
Maybe I'll have to dig around in the registry and see if I can find somewhere that my MK6000 and/or Voice Command is mapped for regular Bluetooth but not A2DP, but I suspect that will be a fruitless venture. And it would be a lot easier and more productive if I still had my 8125 to compare registries, but I washed my 8125 in a load of laundry a month ago (and hence the Tilt upgrade).

using the button on the (wired) hands-free

Been trying to solve this problem for a while, noone seems to have the answer.
i have recently installed MS voice commander (wonderfull software btw), but i find it useless since i cant use it when i most need it and that's when the phone is in the pocket and i have handsfree plugged in (the cable).
the button can do only 3 things by default. pick/hang up calls and redial last number.
is there any way to map a program to it? so when i either press and hold or better yet, press it once i get voice commander running?
I use Bluetooth and I hold the button down and MS command comes up.
What brand of headset are you using?
i use the standard hands-free that comes with the phone. I've tried a number of solutions for Bluetooth devices but none of them worked.
this headset connects through the usb port at the bottom of the device. cant find any way to even detect that button from inside the device.
what you have on your BT looks like exactly what i'm after. with voice commander it's possible to use most functions of the phone without touching it, but it's pointless if you need to get it out to start VC in the first place.
I may not be of any help here as I have not used Voice Commander but..
If you go to 'Settings' 'Voice Speed Dial' you will see a tab at the bottom for Application.
I just use this as it responds to a single press from any headset.
Soz if I'm intruding.
not quite what i need. i want to call voice commander directly with the button.
it would've been easier if i could already run voicedialer or any other program from the headset. but nothing works.

Lost Bluetooth Voicedial - MDA 3

Hi all,
Great forum, great phone. I've read through the various threads regarding not being able to initiate a voice dial using bluetooth, however, my phone worked fine out of the box. I could push the button on my bluetooth headset and call using voicedial.
BUT, that wasn't enough, I decided to install Microsoft Voice Commander (prior to reading these threads). The voice dial (via bluetooth died instantly).
I have since uninstalled MVC but still cannot use the voice dial without first pushing the button on the phone.
Anyone got any suggestions to remedy this problem.
Thank you all for you time
un-pair the bluetooth and then pair again, then soft reset, see if that works
thanks, good point, I haven't tried that...yet
I've had the same problem. I've tried re-pairing and soft resets but to no avail. Is there a registry setting affected? I can use the voice button on the phone to activate the built-in cyberon voice dialler but the bluetooth headset won't.
Found the solution
Need to edit registry: HKLM/Software/OEM/VoiceCommand
And if not present, add string value called "Path" = "\Windows\SDDialer.exe"
Works again now! Phew!

More BT + Voice Command issues

OK, I've read a bunch of these threads but I'd Like to get everyone who is knowlegeable about this together because I though I was doing everything right.
First off I am using Dutty's newest ROM that is supposed to have all the voice command mods "out of the box"
Second I have a sony ericsson HBH-DS980, shameless promo I know but, this is an awsome headset I love it and would recommend it to anyone (all I need is this problem fixed)
OK, for the most part everything was working fine at first. I paired everything and started using voice command with all my music, and random system info (battery level, date and time etc....) but then I wanted to start calling people from it and it seemed to work just fine. I'd say who I wanted to call it would ask for confermation then it would start to dial...then the wierd steps in. my headset then looses stereo connection (usually I would have it in stereo mode) so I'm looking at the handset (it takes a couple seconds to "catch up") and it says everything is fine untill the call gets picked up then it drops the ericsson completely it no longer has it as a stereo bt or even a hands-free mic. And to top things off the call just stops so I can't fix anything.
Another thing I've noticed is after something like this or even looking up a contact via voice for some reason wm and my bt don't like to "play nice" I constantly get disconnects and after a while Voice command stops hearing me through my mic (I know it's not the mic since if I reboot and repeat it works just fine) but it will work if I use it from the handset.
I don't reeally know what's going on but I do run S2U2 very often and I was just on another thread that was saying his problem was S2U2 and I want to know if anyone else has found that was the issue. Hell I'd just be happy to know I'm not alone. If anyone would like to offer help that would be great too.
OK, here is version 2 of the explination:
OK I paired my BT (I did this twice as a stereo bt and a regular handsfree) and made a call via voice command (it hears me fine and dials) after a couple seconds my BT gives the disconnect sound. After that the call ends. Not only that but my phone bars go to 0 for a split second and I get a message saying that my phone couldn't connect to my wireless internet. (most likely due to the "0 bar" issue)
After this whole thing I attempt to call (or do anything) via Voice command and it won't understand a word I say through the mic. Even rebooting doesn't solve this issue. I have to remove the bt from my list and re-pair it.
_________________________________________________________
it looks like when VC errors it takes my entire phone with it. Has anyone else had this issue. and BTW it doesn't seem to be related to S2U2 like I though in my last post since it was disabled
Are you talking about MS Voice Command or Cyberon Voice dialer??
Can you try with another BT? Just to verify that's not the bluetooth issue.
I have a similar issue with my Jawbone BT and the problem is with my BT . I have a logitech BT and it doesn't give me any problem.
Are u using s2u2 v0.99 or v1.0?
If you want (BT handfree + s2u2 + voice commander) all three together, you may need to give up the new version and install back the v0.98.
It works for me on my Elf powered by Cloudyfa's shadoW 2.1 TE
Hope it helps.
Cheers
xcom923 said:
OK, I've read a bunch of these threads but I'd Like to get everyone who is knowlegeable about this together because I though I was doing everything right.
First off I am using Dutty's newest ROM that is supposed to have all the voice command mods "out of the box"
Second I have a sony ericsson HBH-DS980, shameless promo I know but, this is an awsome headset I love it and would recommend it to anyone (all I need is this problem fixed)
OK, for the most part everything was working fine at first. I paired everything and started using voice command with all my music, and random system info (battery level, date and time etc....) but then I wanted to start calling people from it and it seemed to work just fine. I'd say who I wanted to call it would ask for confermation then it would start to dial...then the wierd steps in. my headset then looses stereo connection (usually I would have it in stereo mode) so I'm looking at the handset (it takes a couple seconds to "catch up") and it says everything is fine untill the call gets picked up then it drops the ericsson completely it no longer has it as a stereo bt or even a hands-free mic. And to top things off the call just stops so I can't fix anything.
Another thing I've noticed is after something like this or even looking up a contact via voice for some reason wm and my bt don't like to "play nice" I constantly get disconnects and after a while Voice command stops hearing me through my mic (I know it's not the mic since if I reboot and repeat it works just fine) but it will work if I use it from the handset.
I don't reeally know what's going on but I do run S2U2 very often and I was just on another thread that was saying his problem was S2U2 and I want to know if anyone else has found that was the issue. Hell I'd just be happy to know I'm not alone. If anyone would like to offer help that would be great too.
Click to expand...
Click to collapse

voice dial through bluetooth headset?

Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all

Categories

Resources