Related
Ahoy mateys,
There's a new custom ROM up on the ftp. It is based on AKU 2.3, originating from a T-MO beta ROM. The core OS however is not beta and is the final AKU 2.3 release.
This ROM feels much better to me than 2.25 did. It will take a few days to really know if it's more stable, but after about 12 hours with it, it feels right. Please only install this ROM if you can deal with potential oddness.
A few interesting notes, and some stats:
-A2DP was already integrated into the OS (no more add-on needed), and works mighty nice with my HT820s, although it sucks CPU
-Auto timezone is active - disable it if your towers insist you're somewhere you aren't
-Boot time is pretty fast, about as fast as 2.25
****THIS NEXT STATEMENT SHOULD BE READ AND UNDERSTOOD****
-The reported ROM build is 2.24. However the core OS build is newer than that of the leaked Cingular ROM version 2.25. This is because the source carrier (T-MO) happens to be at a different place in their numbering. Again, the OS build is newer than the one in Cingular ROM 2.25.xx.
***********************************************************
-The radio ROM is 2.25.11, the same as was in Cingular's 2.25.
-Vibrate while sleeping still works
-Manual phone network selection is re-enabled
-The GPRS/EDGE indicator is now a little different: In the title bar, the usual "E" or "G" indicator will tell you which of the two is available. Added was a very small "E" or "G" over the signal strength bars to indicate an active data connection. This is either new, or my short attention span never noticed it.
-OS reports as: OS 5.1.195 (Build 14955.2.3.0)
-Contains Cingular customizations for accounts, etc
-Added: themes, ringers, OmapClock w/ shortcuts, improved Task Manager, contact multi-select, wireless today screen item
-Makes toast, but not waffles (yet)
Alrighty then, here you go:
ftp://xda:[email protected]/Up...U_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST2.exe
For the adventurous, let me know how it works for you, and whether the toast is any good. I don't run much in the way of third party apps, so can't comment on issues with them.
EDIT 06/06/06:
I replaced the T-MO sourced 2.25 radio with the Cingular sourced 2.25 radio since some folks say they get better performance. Link to renamed file udpated.
Also includes a softkey control panel app to change softkey mappings.
One more quick note - please don't PM me regarding this or other ROMs. Aks in the forums for the benefit of all. Questions that aren't answered elsewhere in the forum WILL be answered by any number of the great folks arouns here.
[email protected]!
Thanks a lot, i will try it this afternoon.
applying now .... thanks for the great work
can you make a rom with all your customization (themes, rings, etc) but WITHOUT any Cingular stuff? I'd like to use the ROM on a different network.
Thanks
PS: is it possible to find, somewhere on this or other forum, a complete guide on how to cook a wizard rom?
I've searched extensively this forum and now i think (or i hope) i have all the knowledge and the tools i need to start however i'm scared i can destroy my phone with a bad rom.
Thanks, bye
you rock !
installing now.... i use spb pocket plus i will give feed back on interaction with that ..
prior to update:
<ABOUT>
OS 5.1.195 (BUILD 14828.2.2.0)
<DEVICE INFO>
ROM:2.5.11.1
ROM DATE:5/11/06
RAIO:2.07.10
PROTOCOL:413.1.03
just installed rom and am a little confused..
it doesnt look like my "OS BUILD" Ver changed..
here are the numbers..
<ABOUT>
OS 5.1.195(BUILD 14928,2,2,0)
<DEVICE INFO>
2.25.11.1 WWE
5/11/06
RADIO 02.25.11
PROTOCOL 4.1.13.12
Ext ROM 2.25.11.102
device info is different but not os build.. i am a little confused..
DUlrich1227 said:
just installed rom and am a little confused..
it doesnt look like my "OS BUILD" Ver changed..
here are the numbers..
<ABOUT>
OS 5.1.195(BUILD 14928,2,2,0)
<DEVICE INFO>
2.25.11.1 WWE
5/11/06
RADIO 02.25.11
PROTOCOL 4.1.13.12
Ext ROM 2.25.11.102
device info is different but not os build.. i am a little confused..
Click to expand...
Click to collapse
Did you unlock your CID first? I'm pretty sure it's still a prerequisite. Follow fario and button for a little while bro, then come back...
http://forum.xda-developers.com/viewtopic.php?t=47848&sid=af7ca6d1ea263047d0c1f69177976a16
Steven
so now i have tested it, works very fine and stable on my T-Mobile Vario. Thanks for that.
So far sumitter this ROM seems to rock hard and fast! BT hasn't shut down and it does boot quicker. I'm gonna start playing with this newer Clearview and see if I can get by without that Adobe Reader... stratnge that they never updated it, huh??? ... kinda like MS Voice 1.5 ...WTF?
Thanks bro!!
Steven
chow
Greetings!
Just upgraded from your 2.17 ROM and this one seems to be a lot faster especially on bootup.
Thank you very much!
Nice work summiter Only been on the wizard scene for 2 weeks and Ive already noticed who the "daddy" is I do have one request though, could you maybe list what files are in the extended rom and there function so to avoid installing Cingular setting ect
Summiter, just noticed that inserting or removing the memory card will wake up the 8125. Nice!
Now, if only the keyboard backlight could be made to stay on for 30 seconds instead of 5...
Dr Puttingham said:
Did you unlock your CID first? I'm pretty sure it's still a prerequisite. Follow fario and button for a little while bro, then come back...
http://forum.xda-developers.com/viewtopic.php?t=47848&sid=af7ca6d1ea263047d0c1f69177976a16
Steven
Click to expand...
Click to collapse
i did run the unlock .b version at first when i went to original rom (not this one) but i will try all this again..
ok doc i just went backwards with the rom as per directions and will unlock..
new settings info:
<ABOUT>
OS 5.1.70 (BUILD 14410.1.1.3)
<DEVICE>
ROM Ver: 1.8.11.1 WWE
ROM Date: 11/24/05
RADIO Ver: 01.09.11
PROTOCOL Ver: 4.0.13.20
ExtROM Ver: 1.8.11.103
ok everything different running unlock now will be back to edit post if anything changes than will run new rom from the big S again
mmm toast....
thanks for the update, will install this later...
Great, I was just about to install the AKU 2.2 version, but I'll jump on this instead!
Just installed.
Hit a couple of oddities for the first time (previously installed 2.17 and 2.25 summiter roms) that I'd heard reported before: 1) one install (rhinostats) hung (clock just went round and round for several minutes after install) at the end requiring a soft reset. The install was successful though. 2) after successfully setting up our corportate pushmail, some time later when I checked back, the mail folder was missing in messaging. Attempting to deinstall/reinstall error'd with an account setup problem. I deinstalled, then soft reset, then re-installed and it was able to resetup the account.
The rom is a little different than past Cingular ones in that the cingular GPRS settings are under My ISP. I didn't see how to change proxy on My ISP; however, it seems proxy is not set which is what I want.
Also, the O2 today theme was missing. I actually was using that ;-)!
Thanks for putting this all together Summiter!!!
Finally took the leap and updated to this ROM from my Cingular stock ROM (OS 1.8.11.1).
A quick question for Summiter: what are the registry changes you made, if any?
Thanks for the ROM!
So far so good! Pocket Plus has been working great. I love it!
summiter said:
Ahoy mateys,
There's a new custom ROM up on the ftp. It is based on AKU 2.3, originating from a T-MO beta ROM. The core OS however is not beta and is the final AKU 2.3 release.
This ROM feels much better to me than 2.25 did. It will take a few days to really know if it's more stable, but after about 12 hours with it, it feels right. Please only install this ROM if you can deal with potential oddness.
A few interesting notes, and some stats:
-A2DP was already integrated into the OS (no more add-on needed), and works mighty nice with my HT820s, although it sucks CPU
-Auto timezone is active - disable it if your towers insist you're somewhere you aren't
-Boot time is pretty fast, about as fast as 2.25
****THIS NEXT STATEMENT SHOULD BE READ AND UNDERSTOOD****
-The reported ROM build is 2.24. However the core OS build is newer than that of the leaked Cingular ROM version 2.25. This is because the source carrier (T-MO) happens to be at a different place in their numbering. Again, the OS build is newer than the one in Cingular ROM 2.25.xx.
***********************************************************
-The radio ROM is 2.25.11, the same as was in Cingular's 2.25.
-Vibrate while sleeping still works
-Manual phone network selection is re-enabled
-The GPRS/EDGE indicator is now a little different: In the title bar, the usual "E" or "G" indicator will tell you which of the two is available. Added was a very small "E" or "G" over the signal strength bars to indicate an active data connection. This is either new, or may short attention span never noticed it.
-OS reports as: OS 5.1.195 (Build 14955.2.3.0)
-Contains Cingular customizations for accounts, etc
-Added: themes, ringers, OmapClock w/ shortcuts, improved Task Manager, contact multi-select, wireless today screen item
-Makes toast, but not waffles (yet)
Alrighty then, here you go:
ftp://xda:[email protected]/Up...UU_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST.exe
For the adventurous, let me know how it works for you, and whether the toast is any good. I don't run much in the way of third party apps, so can't comment on issues with them.
Click to expand...
Click to collapse
Thanks a lot! Installed it a few minutes ago, so I am not able to rate it's stability, but so far so good. One thing I noticed is that in the settings--> connections menu an option is added: USB to PC. It states " Changing the type of USB connection your device uses can help with problems connecting Activesync. "
Enable advanced network functionality (checkbox)
Might be usefull for those having troubles with USB connections.
Helmi BA WM2k5 AKU2.6 Beta (v.1.1.2 Beta)
As requested..
This release Included.
- Older OS Built but more compability (MS Voice Commander for example)
- Modem link (as BT DUN Modem Incoming port COM6)
- Mamaich Paging Pool 16mb
- Wifi & Bluetooth Coexistentcy.
- Ability to save everywhere with Pocket Excel
- Smart Dial v2.2 is added to ROM. (if u dont use it just disable it)
- Flight Mode, Task Manager, WM5 New Menu, WM5 Storage, & USB Mode Switch added to extras folder.
- StartUp Manager by Baniazek
- Use ace_ddi as video driver (Landscape & Portrait fully supported but gif file wont show in PIE, use D3D_Driver driver to support gif with PIE but Landscape mode will need to re-align after soft reset)
- .NET Fix included
- Transcriber included.
Limitation/Still Not fixed.
- CommManager Didn't fully Manage wifi still need to turn on wifi with Wlan manager (wifi tray icon) first.
- WModem Didnt work.
Most off the setting are still the same as my AKU3.2, including MMS/GPRS operator list.
this build is a complete new remake of AKU2.6 on BA, so maybe some problem may happens. as always...we test it together guys.
Download here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU2.6_32mb_v1.1.2.rar
http://micmeo.com/BlueAngel/AKU_2.6/Helmi_WM2k5_AKU2.6_32mb_v1.1.2.rar
thanks Micmeo for the space and the help... thanks man. :wink:
please remember this is an Older version of AKU, so PIM backup might not work, if u downgrade from AKU3.xx rom...
best regard
helmi
AKU26
Helmi very thanks for that release, iam going to flash imediatly. Sorry for the pm about the direct link, i was just to quick in answering. Posting my experience tomorrow.
MicMeo said:
I'm using SPB Backup as my default backup program. What's happen when I use a PIM backup of AKU 3.2 to restore in my downgraded AKU 2.6? Do I need to sync my PIM data with M$ Outlook b4 downgrade?
Click to expand...
Click to collapse
hmm... I can't be sure, but learn by old AKU2.3 experience, the pim data is modify in AKU3 so i think its better to sync first. then u can try if it work or not bro.
The AKU 3.2 has a 'Bluetooth hardware error' error, thus I'll propably downgrade to 2.6 :/
it's possible to flash this rom without hard reset?
I have Helmi Aku 1.3.2 beta but I have some problems with phone and WiFi.
Nope, its not possible :/
Man, I just upgraded 2 days ago from WM2003SE to AK3.2 v1.3.1.
Now, I see AK3.2 v1.3.2 & AK2.6
Wonder which one should I try. I do miss using Voice Command, but I know I have TT6 working on 1.3.1 nicely.
Hmm..... :roll:
2 question:
1) Anyone got a .cab for Canada Rogers&AT&T GPRS setting? Can this be included in the future for Operator list?
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?
mr_ding said:
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?
Click to expand...
Click to collapse
that would actually make it slower you'll be lowering the paging pool from 16MB to 8MB.
mr_ding said:
Man, I just upgraded 2 days ago from WM2003SE to AK3.2 v1.3.1.
Now, I see AK3.2 v1.3.2 & AK2.6
Wonder which one should I try. I do miss using Voice Command, but I know I have TT6 working on 1.3.1 nicely.
Hmm..... :roll:
2 question:
1) Anyone got a .cab for Canada Rogers&AT&T GPRS setting? Can this be included in the future for Operator list?
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?
Click to expand...
Click to collapse
there's no need to apply Paging Pool with both rom (1.3.2 & 1.1.2).
Wow, just upgraded to 1.32 AKU 3.2 with 16mb paging file size yesterday and now AKU 2.6 with 16mb paging file size is ready.
No time to try this out. Maybe next week.
Anyway, 1.32 AKU 3.2 is works very fast for me now, everything ok except for no M$ Voice Command.
Hope to hear from the rest of you on the results of this new upgraded rom.
Hi,
couldn't wait to test that release. My first try on WM5 was helmis AKU32 v13, which runned smoothly after applying the poolsize patch. But my most valuable thing, MS Voice Command, didnt run on that AKU since PIM Database format changed. Then tried AKU23 from Helmi wich worked acceptable with some problems and Voice Command worked well. As AKU26 with all fixes from AKU32 was here I gave it an instant try and yes that was it.
Haven't found any problems/bugs playing around yesterday night, that helmi dont know allready. Voice Command works fine, which is the most important thing for me. I have the feeling that ActiveSync is much more stable than in AKU23 or 32. Cradle in/out again and again and no errors on my desktop. I got the Microsoft GPS Multiplexer running, didnt work for me in AKU32 or AKU23 from helmi
Helmi I could kiss your ass for that release!
EDIT:
Minor Problems: Playing an MP3 from SD-Card and suspend/turn on again hangs the Shell, RNDIS doesnt detect when removed from cradle (IP Adress is still up), turn on and off resets that behaviour.
MCSchermer said:
Hi,
couldn't wait to test that release. My first try on WM5 was helmis AKU32 v13, which runned smoothly after applying the poolsize patch. But my most valuable thing, MS Voice Command, didnt run on that AKU since PIM Database format changed. Then tried AKU23 from Helmi wich worked acceptable with some problems and Voice Command worked well. As AKU26 with all fixes from AKU32 was here I gave it an instant try and yes that was it.
Haven't found any problems/bugs playing around yesterday night, that helmi dont know allready. Voice Command works fine, which is the most important thing for me. I have the feeling that ActiveSync is much more stable than in AKU23 or 32. Cradle in/out again and again and no errors on my desktop. I got the Microsoft GPS Multiplexer running, didnt work for me in AKU32 or AKU23 from helmi
Helmi I could kiss your ass for that release!
EDIT:
Minor Problems: Playing an MP3 from SD-Card and suspend/turn on again hangs the Shell, RNDIS doesnt detect when removed from cradle (IP Adress is still up), turn on and off resets that behaviour.
Click to expand...
Click to collapse
What about turning on bluetooth and wifi and flightmode? Does it work all the time?
ThExSenatoR said:
What about turning on bluetooth and wifi and flightmode? Does it work all the time?
Click to expand...
Click to collapse
Well, i tested it for you. Using the Systrayicons of Bluetooth and WLAN has worked turning booth on and off. Using Comm Manager it only works well if you turn BT and WLAN on and off via systray once after a soft reset. If you don't do that Comm Manager will make trouble. Flightmode works only to disable the phone, enableing it again didnt work for me (tested twice). But Flightmode.exe was able to turn on the phone again after some seconds.
Bluetooth does not disble when device suspends and WLAN disables when device suspends and reanables if you resume, that the normal behaviour of my last WM2003. Im going to check GPRS later the day.
TomTom5 boots up in around 8/9 seconds with "Deutschland-Map"
EDIT: GPRS short connect test works, no Connect link in the GPRS Ballontip, but when you open a URL it begins the connection. I had to change the Search GPRS an Connection to Search GPRS on Radiostartup to get it connect successful.
By that i realised that after i swaped my SIM Cards, the first Bootup show R: NONE G: NONE, and Radiomodul doesnt work. After one Softreset everythings fine again.
TomTom6 boots up in 10 sec (tested with North America maps)
But closing TT6 does not disable bluetooth connection (AK3.2 v1.3.1 does it)
What about sms backup from Helmi's 1.32 rom using Spb backup, can it be restored to this rom?
Have anyone of you tested it?
Thanks.
my system backup via spb backup yielded errors. i had to reinstall all my apps.
i opted to go back (or forward?) to 1.3.2. had problems with messaging, worldmate pro, hanging, speed (doesn't feel like it's with a 16mb paging pool).
Anyone have a solution or tip for that?
With Helmi AKU32 v13 installed my display did not turn on when I received a sms (device suspended), but played sound and showed notification (after manually turning on display)
This "feature" is missing in this AKU26 release, what have I to do to restore this behavior? I searched the forum but could't find answers to that. I guess it must be a notification option or something in power settings?
Thanks in advance.
With this greatest rom when I receive an sms my pda plays only the sound and the screen doesn't turn on.. until I press power button.
zard said:
What about sms backup from Helmi's 1.32 rom using Spb backup, can it be restored to this rom?
Have anyone of you tested it?
Thanks.
Click to expand...
Click to collapse
Just tested using spb backup 1.5 to backup my sms, emails and mms before putting in this rom and restoring them. Works without any error.
Cheers!
Closer said:
With this greatest rom when I receive an sms my pda plays only the sound and the screen doesn't turn on.. until I press power button.
Click to expand...
Click to collapse
I'm facing the same thing, i.e. with incoming sms, led flashes red, pda plays sound and screen doesn't turn on, until power button is pressed.
Maybe this behaviour is good because at times, I don't realise an sms had been received and the screen is turned on, and programs on the pda are started without me knowing.
Cheers!
I`m still a newbie at this so can someone show me how to input the registry keys?
Try to find PHM Registry Editor or Resco Explorer (which has registry edtior built-in)
A google search will lead you to either one of them
i found phm, but how to insert the info
please guide me step by step please
What register setting are you trying to modify?
{Hack for 802.11g is HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS: dot11SupportedRateMaskG=8}
I would like to add that.
this hack will not work on blueangel, because the hardware is not capable for g speeds, as far as i know it only works on wizard
I was looking for a hack for Helmi BA WM2k5 AKU 2.6 which would allow me to use the WIFI correctly on my PDA2k.
Since i have upgraded to WM5, i always had a problem with my WIFI, it was taking way too long to load a page.
Is there some hack for this problem that anyone would know of?
i'm newbie too. My BA come from Ebay. Truly, the wifi is working with 802.11g. Except Skype, after 1minute of voice chat, the connect is hang off. No problem with Internet.
The Rom version is : 1.42.01 GER
Date: 09/05/05
Radio version: 1.13.00
ExtRom: 1.42.116 GER
Anyone can explain it?
Sorry about my bad English.
This is a beta rom so it will contain a lots of bugs!
This is a clean rom and not contain any extra apps
What's in it ?
AKU 3.5 OS
32 MB RAM Disk
16 MB Page Pool
R4 Lazy Release Click here do download
I created this release for all the noobs who can not run setoperator.bat
Upgrade procedure:
1.Extract the rar somwhere in your computer
2.Open the folder in which the files were extracted
3.Copy EXTROM folder to your SD card (you may want to edit it but ... i wont include this into the instructions)
4.Put your device in Bootloader mode and place it to cradle
5.Start MAupgradeUT_NOID.exe and follow the onscreen procedure
6.Perform WM5 Hard Reset
If you have any questions please read wiki all the details are explained there (everyone should read before start *****ing here)
R4
Rom:
Fixed camera MP4 Recording bug (mp4reader.dll)
Fixed Notes Sync (file system error in my hard drive has damaged few files in my kitchen so it produced these faulty roms, i have replaced them and now everything is working just fine)
Fixed Screen Rotation (removed screen rotate service and now I use Himalaya WM2k5 Screen Rotate Fix 1.1 with GUI elements modified by me to fit the rom vision)
Added again Power Service (for better power management)
Power Icon is now in Tray
New Camera (Modified its resources also.The original looks like crap)
Changed a bit rom structure, which improved stability and speed
Imported a few more GUI enchasements from WM6
Extended Rom
Added MMS Templates
Added Camera Templates
Added Intent Midlet Manager 11.1.7.1023
Added .NET Compact Framework 2.0 SP2
Added HTC MIDI File Support
R4 Important Note:Set your operator before upgrading, if you do not do this it is possible that you will fail the upgrade procedure
R3
Rom:
SIM Manager v 5.30 (taken from HTC Trinity rom)
Internet Sharing App
VideoMMS (Taken from O2 rom)
HTC X-Button 1.0 Build 27666 (latest one)
BT Remote Sim Access
Windows Mobile DST07 Update
Categorizad Folders in Programs Folder of the Start Menu
Office Mobile Folder in Start Menu
Added More WM6 Resources
Changed Rom Version as follows:
WM Version.AKU Version.Release Number=5.35.03
Extended Rom
Adobe Reader LE
Device Lock (application which locks your device and turns off the screen perfect if you listen mp3's) - xplode WM6 Edition
Intent Midlet Manager
OneNote Mobile (edited to create shortcuts to a proper folder for this rom)
WMA Profiles For windows Mobile - xplode Wm6 edition
WM6 Addons (Original WM6 Themes, Module for changing appearance of cards in card games to WM6 ones, Module for changing appearance of the keyboard to WM6 one, WM6 Aditional ringtones)
R1
Applied some customizations from Hemi_c's rom as:Bootcsreen, dialer, few icons, some graphics (thanks helmi for those)
ARCSoft MMS Composer v 3.5.1.5
Windows Live
Fixed powerpoint bug
Removed PocketMSN
Known bugs:
A2DP does not work
GPS Applet does not work
Battery bug is still here
R0
Crossbow today theme
Crossbow dialer (created by me using screenshots of crossbow and the legendary program Microsoft Paint)
Crossbow sounds (extracted from www.mobile-review.com's crossbow video from the review)
Crossbow icons (most of them are created by indra9110, some of the icons are created by Helmi, some of the icons are taken from resorces of ActiveSync 4.5 beta 2, and some are taken from Windows Vista, Office icons are taken from Microsoft Office 2007)
IA Camera v 2.21 Build 20245
ARCSoft MMS Composer v 3.0.16.6
SIM Manager v 5.29 (taken from artemis rom)
I have not created EXTROM for this rom, i have uploaded various cab files here and needed files for the extrom to autorun here so everybody can create their custom extrom to fit theur needs
There are few files which i want to point
Vista.tsk - Windows Vista today theme created by me
wisbar.cab - Wisbar Advance 2.7 Crossbow Edition ( i have added crossbow theme into the default themes)
xplodeQVGALIve.cab - Windows Live Mobile QVGA Edition (i have removed unneeded resources to save space - squarescreen support and VGA support)
TreoW700WebSearchToday.cab - today search plugin which uses google for searching (extracted from treo w700 rom)
Intent_MIDlet_Manager_11.1.7.1023.cab - latest midlet manager i found (works perfect with google maps)
Screenshots:
---------------------------------
BA WM5 AKU3.5 R4 xplode |Download|Mirror|Mirror 2|
---------------------------------
BA WM5 AKU3.5 R3 xplode |Download|
---------------------------------
BA WM5 AKU3.5 R1 xplode |Download|
---------------------------------
BA WM5 AKU3.5 R0 xplode |Download| - no link for it
---------------------------------
Thanks part
First big thanks to mamaich for his excellent romediting tools, thanks to bepe for the original idea of cooking roms through romkitchen, thanks to itsme for hes brilliant perl scripts and the help he provided me, also bigger thanks to Helmi_c who helped me a lot and continiues to help me (thanks bro without your help I would never create such rom), thanks also to indra9110 for providing me these nice icons, and the last but not least thanks to www.xda-developers.com comunity, it helped me learn everything i know about PDA-Phone devices!
EDIT MDAIIIUser
I have moved the files to a safe place (and changed the links)
ftp://xda:[email protected]/BlueAngel/BA_WM5/Shipped_Extracted_Updates/xplode
I Will test now!
Installed and running without major problems, good for testing. I have not added any cabs as off yet. Great work xplode.
AKU 3.5
wow...
another new rom..
already have downloaded the files..
will try later..
great work xplode!!!! =)
Must we apply the cabs in the Fixes folder in the FTP?
Do you know how to make convertion from your rom to Himalaya?
I v flashed but stoped on 4 colors screen.
I tried again, it's ok now.
I've just updated to this ROM from Helmi AKU3.2 v1.3.2 and very impressive. I like the sounds.
Have tested the WLAN. I noticed that under "Wireless Lan", the signal strength bar isn't working. It is blank. The default taskbar signal strength works though.
Will be trying the Bluetooth with my Holux236 GPS after this.
*edit* - Now I can't seem to turn my WIFI on. Will investigate if it is caused by the cabs I installed from the Cabs folder on Ftp.
WLAN... solved.
Ok, on first time device on, to turn on WIFI, you need to go to Wireless LAN to turn on WIFI first. After that, you can start using CommManager to control WIFI on/off.
If you leave WIFI on during soft reset, your wifi will be on after soft reset and you can still use CommManager to control WIFI on/off.
But, if you leave WIFI off during soft reset, then you can't turn WIFI on anymore whether via Wireless LAN switch or CommManager switch regardless how many soft resets.
Anyone can confirm this? Or rather provide a solution? Did I miss out something?
*edit* - Nevermind.. haha. It is working now somehow but my device is on fresh hard reset.
I can't seem to get Wireless Stereo/A2DP to work. I've checked the obvious entries in the registry and the dll files, no joy.
cant wait to test
downloading....thank you very much.
Has anyone managed to make Smart Dial v2.2 work?
guys when i double click the file and after it flashes , do i need to press all three buttons like before and do the 3 options thingy?
or just flash and will reset automatically.
flashing from Helmi's 3.1 ROM
mambojambo said:
Has anyone managed to make Smart Dial v2.2 work?
Click to expand...
Click to collapse
Smartdialing is not compatible with AKU3.5...
helmi_c said:
Smartdialing is not compatible with AKU3.5...
Click to expand...
Click to collapse
Thanks Helmi for clarifying that.
ahassouna said:
guys when i double click the file and after it flashes , do i need to press all three buttons like before and do the 3 options thingy?
or just flash and will reset automatically.
flashing from Helmi's 3.1 ROM
Click to expand...
Click to collapse
Yes, you should do the three options thingy
Re: Wifi control
mambojambo said:
Ok, on first time device on, to turn on WIFI, you need to go to Wireless LAN to turn on WIFI first. After that, you can start using CommManager to control WIFI on/off.
If you leave WIFI on during soft reset, your wifi will be on after soft reset and you can still use CommManager to control WIFI on/off.
But, if you leave WIFI off during soft reset, then you can't turn WIFI on anymore whether via Wireless LAN switch or CommManager switch regardless how many soft resets.
Anyone can confirm this? Or rather provide a solution? Did I miss out something?
*edit* - Nevermind.. haha. It is working now somehow but my device is on fresh hard reset.
Click to expand...
Click to collapse
Yeah, thats right man. Its the right trick to get WIFI worked without having to SR the device. My experience told me that It would take 2 times turning on WIFI on the Wireless Lan settings, then go ahead to the CommManager. It will definitely work, at least in my situation.
I've noticed two thingys,
1. When connected to GPRS the little 'G' doesn't show up.
2. What happened to the newer version media player that was in AKU 3.3
There was no newer version of WM it was skin which have problems with video playback, the picture was shifted
WLAN - as you all know since we first seen Comm manager WLAN is turning on by Wireless Manager and then you can control it trough Comm Manager
About A2DP i have not compatible headset to test it i have mono one
There is no need to install fixes for this rom, you can try only those which removes comm manager icon and screen rotate icon from tray
I've installed quite anumber of basic apps:
SBSH Ilauncher
Pocket Informant
Pocket Music (Freeversion)
PhoneAlarm
Garmin Que
GPSGate
SPB Diary
Resco File Explorer
TCPMP
They all work fine up to now. The only thing that doesnt work is Smart Dialing which i miss so much. Out of curiousity, how do you guys usually do away without Smart Dial? I feel that opening the Contacts page is time consuming and inefficient. Not suitable for driving. Any easier way?
New version of WM 6.1 uploaded June 14 09
I havn't had any real internet connection for months so I couldn't get eny new build's for some time.
I also am without work so I can't aford getting an proper internet connection so my updates wan't be often as the only internet I have most of the time is GPRS.
anyway here you have a WM 6.1 and WM 6.5 rom with phone working thanks to Cmonex
the WM6.5 is mostly just a test and mighty not be good for day to day usage yet because of the memory usage of WM6.5 only around 10 mb free ram.
I do think I can make some changes to the better so the 6.5 rom can become more useable because wm 6.5 is running nice and fast on shift and it's also the rom I will like to continu working on for my personal use
in the next week or 2 I'll gather as much info from you so when I get back here (Parents hous only place I can have good internet) in 2 weeks I'll hopefully have a better rom for you and all bugs might be ironed out
WM 6.5 apps:
Connections folder:
ActiveSync (apeares to do not open)
GPS Router
HTC GPS Tools
Internet Sharing
Internet Explorer
Multimedia Folder:
Java
Pictures & Videos
RSS Hub
Windows Media
Tools Folder:
Advanced Task Manager
Favorite People (editor for titanium plugin)
Pocket RAR
Sim Manager
SoftReset
USB Tool
Office Mobile Folder:
HTC Calculator
Notes
Tasks
Excel Mobile
Word Mobile
PovwerPoint Mobile
Free ram (Osios Hibernate 1.4)
MS Task Manager
Titanium today:
Quick Launcher (made by me)
ATFavepeople (picture dialer contacts quick launcher)
Default titanium clock
All Mesages tabs in one
Calendar
_____________________________________________________________________________________________________________________
WM 6.1 apps:
Connections folder:
ActiveSync
GPS Router
HTC GPS Tools
Internet Sharing
Internet Explorer
Multimedia Folder:
Java
Pictures & Videos
Windows Media
Tools Folder:
Pocket RAR
Sim Manager
SoftReset
USB Tool
Office Mobile Folder:
HTC Calculator
Notes
Tasks
Excel Mobile
Word Mobile
PowerPoint Mobile
Free ram (Osios Hibernate 1.4)
MS Task Manager
Snapvue today Plugin
HTC topaz qwerty keyboard (Need to select touch input again once for it to aligne right and Xt9 is not working)
________________________________________________________________________________________________________________________________________
Downloads
Radio rom: 1.27.35.28 Download for making the phone function
(If you have used thaihugo or i00 roms you should already have the radio rom needed.)
gullum shift wn 6.1 Download CE OS 5.2.21046(build 21046.1.6.3)
gullum shift wn 6.5 Download CE OS 5.2.21234(build 21234.5.0.1)
Older versions
______________________________________________________________________________________________________________
gullum shift wn 6.1 Download CE OS 5.2.21042(build 21042.1.6.1)
Special thanks to
Cmonex for lots of stuff mainly phone functionalerty
pof for CustomRUU
thaihugo and i00 (I've some of the stuff from their roms)
bepe and ervius for the new visualkitchen
all other devs that have made the tools I use unfutrunaly I can't remember or know their names
well I might need this one
Bugs:
Bouth roms
no icon in taskbar for conection status eg. E or G
WM 6.1 only
WM 6.5 only
ActiveSync icon in Connection folder does nothing (Restarting you device should fix it reported by shaytaan)
Thanks a million.
Coiuld you tell us in your #1 posting if it's snapvue enabled, and which programs are installed on both versions ?
I'm going to install your WM6.5 first, and will send any bigs found in the 6.1 (as 6.5 is more or less just for play)
lucid said:
Thanks a million.
Coiuld you tell us in your #1 posting if it's snapvue enabled, and which programs are installed on both versions ?
I'm going to install your WM6.5 first, and will send any bigs found in the 6.1 (as 6.5 is more or less just for play)
Click to expand...
Click to collapse
I'll update post 1 later tonight when my son has falen asleep
snapvue today plug is in the wm 6.1 if thats what you meen
wm 6.5 has a customiced titanium
The 6.5 ROM has no ActiveSYnc possibility. The icon fails to launch.
"the file MSSYNCAPP" cannot be opened, not trusted, or components not found..."
Flashing 6,1 now
Tip : Forget the SIM autoconfigure, it will save some space.
CDMA ROM needed
Any chance of making this work on the CDMA Shift ??? I am not sure why, but I am stuck in the bootloader despite a hard reset. The only rom that installs properly is the one that left me in this fix. Any CDMA folks out there, or someone with a GSM rom that knows what is needed to switch it to a CDMA compatible version ?
Just installed v6.5, and IT IS FANTASTIC
I like it very much, thanks alot gullum
<lucid> ActiveSYnc works, you have to restart your device
In the 6.1 ROM, the TASKS icon fails to launch, even after a soft reset,
thanks for the update on activesync on 6.5 version.
As I need GPS to be duplexed to to Vista, I recommend putting GPS2Blue in, but you have to ask the authors of that program, like ThaiHugo did.
For the WM 6.5 rom, the home screen font's is a little big. I tried setting it smaller via screen, text size but won't work.
All in all good to see your ROM's. Let's hope one of these days the secret comes out on SD access.
Does the ROM work with headset and mic to talk into or is it still speakerphone only..
Thanks
how come i cant build os of your rom?you deleted the packges files?
i cant seem to connect to the internet using snapvue but the phone function works. am i missing something?
Can someone host these on rapidshare? If they're hosted once, I'll host them on my account as well to get more links for them up. I'm unable to open mediafire.com from China. All the help would be greatly appreciated. Thanks again.
Caid.
444
genesis said:
i cant seem to connect to the internet using snapvue but the phone function works. am i missing something?
Click to expand...
Click to collapse
It works fine.
I installed 6.5 last night. It works fine for me!
Looks EXCELLENT Gullum!
If you have any internet troubles, check your ISP/WAP settings
My ATT added 2 sets of settings, one incorrect, one half correct (so both wrong, but an easy fix by changing the Username)
Some questions:
Is there a way to add to the "Quick Links" to edit the program list?
Also, Is the Network Folder via Connections available in ROM or should we add it manually? (The one in Age of Reason is simple to use)
Also, as far as hosting, I have a server with unlimited bandwidth (just limited storage of 60 GB) that I can host some files as a straight download if that helps in anyway, jus PM me and I can give you access to upload to it.
shaytaan said:
It works fine.
Click to expand...
Click to collapse
you're right....tried connecting inside my room that's where I failed to connect. but brought my shift to the city where the signal is strong and it connected. the speed is excellent. thanks gullum. im using the 6.1 version.
Hey,
could anybody be kind enough to comment on this version of WM 6.5.
If I install it on my shift well it run ok how much memory do I have? and how much storage well they be available?
Can I install this rom with windows 7 or well it cause problems.
At the moment I'm running Windows 7 Build 7100 and it runs ok and I'm running WM 6.1 created by Thaihugo and thats running ok nas well but I would like to try WM 6.5.
Any comment and help would be appreciated.
Thanks
Gigino
gigino said:
Hey,
could anybody be kind enough to comment on this version of WM 6.5.
If I install it on my shift well it run ok how much memory do I have? and how much storage well they be available?
Can I install this rom with windows 7 or well it cause problems.
At the moment I'm running Windows 7 Build 7100 and it runs ok and I'm running WM 6.1 created by Thaihugo and thats running ok nas well but I would like to try WM 6.5.
Any comment and help would be appreciated.
Thanks
Gigino
Click to expand...
Click to collapse
Everything works great on wm 6.5 using window 7 rc
Can't make acivesync to work. Have tried restarting snapview several times but still get the "the file MSSYNCAPP" cannot be opened, not trusted, or components not found"
thank you very much