Had someone update a wing for someone here at work. He modded the phone with some rom, but I dont know which....
Afterwards the voice comand option has been removed. Is there anyway to get that back on the phone?
I saw this http://forum.xda-developers.com/showpost.php?p=1834188&postcount=154 thread, but it seems to be for the dash. I tried the installer but it failed.
Any ideas?
Related
When I first got my g1 I loved it. Then the cupcake update happened. Everyone was overjoyed - except me. My phone went much slower and juddery, and loads of little errors happened. Now these are the 2 problems i need help with:
Rotating. The phone stays in either portrait or landscape mode and won't rotate to the correct mode with the keyboard sliding in or out.
And
Messaging. Whenever I send an sms message i get a force error as soon as the text is sent through.
PLEASE HELP ME :'( :'( before i go to t-mobile and cancel my phone - it has got that bad ((((((((((((((((((((((
If you need anymore info just ask thanks,
Ross.
You might want to try re-flashing the cupcake update, if your phone is rooted then you can search around and find out how to do it easily. If not you need to find the official tmobile cupcake update, I dont have any link for it but I am sure if you search here or google you will find it. You then need to plug your g1 into the usb on your pc and mount the sd card, if it is a .nbh file name it DREAMIMG.nbh, if its a .zip name it update.zip and copy it over. Then reboot into spl by holding camera+power and follow onscreen instructions. Good luck.
Try doing a wipe and see if that fixes your problems.
If wiping doesnt fix your problem id hit t mobile up for a replacement
Hey guys. I tried asking these questions on the official thread of this Rom but somehow my post is getting lost in the tons of pages which are accumulating everyday So here are my questions :
y2jamit said:
Alright folks. I finally managed to move from CM6 stable to NXSense. Before moving from CM 6, I partitioned my SD card using Rom manager with a partition of 512 MB & a swap of 32 MB.I managed to install version eViL-NXSense-v.1.13.1. However after that eViL-Q&D-NXSense-v.1.14.1 was released. So I downloaded that first from the 4shared link. I tried to install the new ROM from Rom Manager using the wipe option. However when the phone goes into recovery it shows formatting blah blah blah and then phone doesn't install the 1.14.1 Rom and reboots and gets stuck on the Google cross logo.
I managed to restore back to 1.13.1 from the back up that I had made. Now instead of using the Rom Manager I booted into recovery and tried to use the install from SD card option. This time the phone started copying files and showed that twice. After this I get the following huge error:
E: Can't symlink /system /customize/resource/bootanimation.zip
E: Failure at line 27:
symlink/data/local/bootanimation.zip
SYSTEM : customize/resource/bootanimation.zip
Installation aborted.
I had to once again resort back to my backup. Can anyone help me out this issue?
After all this I even tried to install 1.13.1 from the recovery using the install from sd card option and apparently this also gave me the exact same bootanimation error. So I guess both the zips are ok. not sure what else could be going wrong.
Also even after flashing networkfix on 1.13.1, the market still struggles to work. It shows loading for some time and then gives an option to retry. However if I try to search for any application or go to downloads, the market starts working normally. Can anyone also provide a fix for this problem?
I really want to use this as my default rom because I am in love with it Excellent work Evil !!! Just want to sort out these issues.
Click to expand...
Click to collapse
In addition to the above mentioned post, I wanted to add that I now also have a2sd enabled after running the commands from terminal emulator. What is the simplest way to update from 1.13.1 to a higher version? Also when loading market for the first time, the GPRS connection disappears and comes back in like a minute. Why is this happening? When using Trackball Alert Pro the patch option says compatible rom not found but the alerts are working fine When using wi-fi hotspot and default options, it is not getting turned on although 3G shows in the top left corner. Do I have manually change any settings.
I would be highly grateful if anyone can resolve all or any of my queries. I am absolutely exhausted in asking these queries in the official thread and reading through tons of pages just to see my query being buried.
Thanks in advance guys.
Alright guys I managed to install 1.14.1 successfully by doing a full wipe first using instructions from this fabulous thread http://forum.xda-developers.com/showthread.php?t=747381 Although this thread is for myTouch 3G Slide, the basic instructions are the same for Nexus One. You just have to use the trackball to select an option. This is exactly what I was looking for I am sure many newbies like me who don't know what a full wipe is, will learn a lot from this magnificent thread. Thank you kingofyo1
Now I still don't understand why the patch option in Trackball Alert Pro shows the rom is not compatible even though basic version is officially provided with the rom. Anyway the alerts work, so I am not going to waste any more time on it.
Even in eViL-Q&D-NXSense-v.1.14.1, when I first open market, my GPRS connection disappears and comes back in like 20-30 seconds. After that market works really well. Anyone has a solution for this?
Also Wi-Fi hotspot still doesn't turn on using default settings. Do I have to manually choose any settings?
Can anyone shed some light on the above mentioned questions?
Hello,
I just got my new Optimus 2x in.
After 2 days using it and draining a lot of battery life installing apps and getting the phone the way I liked it.
The LG apps installed on it started to annoy me bigtime.
So i did the most respectfull thing every tweaker does, i rooted the phone.
Installed the Titanium Backup software and started deleting LG apps.
The deleting part went perfect, then my screen turned black and the only thing working was the kill andriod app software on top.
So i pulled the battery and rebooted, nothing.... the phone got stuck at the LG logo.
Did a Hard reset Volume down + the power button.
It started the installation --> google login --> setting up extra account --> and then got the error about a wizard having problems.
So i guess my rom is corrupt.
Tried updating trough the LG software - emergency and got the message "not possible anymore".
Tried updating trough KDZ firmware update tool but it can not find the phone*.
*Downloaded the original firmware from a thread located here.
Does anybody know how to get in emergency mode so i can try different things.
Or maybe other options i could consider?
If not i'd might considering sending it in for warranty.
But it boots so there must be a way to get things working again.
Thx i appreciate getting all the help and ideas.
Im sorry to hear about your problem
Hope u can fix it
But may i ask how do u root it? I try z4root but no use...
heroddaji said:
Im sorry to hear about your problem
Hope u can fix it
But may i ask how do u root it? I try z4root but no use...
Click to expand...
Click to collapse
I rooted it with superoneclick.
--small update--
If i skip the setup part after my google login, i can force stop the wizard error.
But it does not go into android itself, i get the top bar but thats it.
The LG software recocgnizes my phone but says it's OK and it does not need a update.
Wait for android 2.2.3?
That might do the trick, but then i might have to wait more than 2 weeks
1.Turn the power off. If your LG Optimus 2X is frozen, pull the battery out and reinsert it
2.Hold the Home and Volume Down button
3.Press and hold the Power button until the device turns on
4.Follow the on-screen instructions to reset your device
That's the only option, on this time.
Tried this.
It says S/W Upgrade
Please wait
while upgrading...
and then nothing.
Try boot your phone to android then connect it to pc and run adb shell if shell working put all apk,s from rom dump here.
You have to copy all files to /system/app.
I'll give it a try tomorrow, have to get to work in like 3 hours =)
Im done for today.
Actually, if you get the notification bar, Android is working.
Sounds like you just deleted the Launcher, did you replace it?
If not, adb install and new launcher and you'll be good to go. Although you'll want one on your system partition too!
Have a look in the "Safe to remove" apps thread.
That's it, that's the one i accidently removed.
Any idea how to put it back on the phone?
As described above your post, trough ADB shell?
Can someone post LGLauncher in this thread?
FEARME said:
That's it, that's the one i accidently removed.
Any idea how to put it back on the phone?
As described above your post, trough ADB shell?
Can someone post LGLauncher in this thread?
Click to expand...
Click to collapse
Download here LGHome
Thanks i downloaded it.
But the thing is i can't run adb it gives me the error: device not loaded.
Tried installing the google usb drivers, gives me a no can do.
Another thing i figured out is this: Installing LG PC Suite IV.
It does give me the device connected, but i can not update.
* Can sync contacts
* Can sync Favourites
* Can sync Memo's
But no update (because it's not out yet)
Isn't there a way to fool the suite there is an update but in fact it's just the old firmware and replacing it (making it a repair).
This Thread is discussing the same problem as i am, btw
Fixed!
Obtained the LGLauncher.apk and emailed it to my google account!
Got it out of the above link i posted.
FEARME said:
Fixed!
Obtained the LGLauncher.apk and emailed it to my google account!
Got it out of the above link i posted.
Click to expand...
Click to collapse
Great, but you going to want to fix this problem:
FEARME said:
But the thing is i can't run adb it gives me the error: device not loaded.
Click to expand...
Click to collapse
djmcnz said:
Great, but you going to want to fix this problem:
Click to expand...
Click to collapse
as i said in the other thread you should use root explorer to copu the launcher to /system/app
if you dont it will be gone again if you ever factory reset.
And next time dont delete stuff... just freez it from titanium... Frozen apps are gone (cant be started by the system or seen in launcher) but you get them all back if you factory reset (so no risk of bricking)
OK... we dont get the few megs of free space by freezing... but that is not really an issue on this phone.
I believe I have correctly rooted the phone - I have a Super User icon and when I abd shell I get #
When I run the adb shell /data/local/flash_image recovery /data/local/yourrecoveryimage.img command I get "[1] Illegal instruction /data/local/flash_image recovery"
In several threads here I saw people saying to just use ROM Manager. I downloaded the APK, but when I tap on it I get a Parse Error.
More research... and I think the issue may be that my system version is blocking things. I found a site that had a Windows program that was supposed to push an older version to the phone (can't find the link right now) but it failed too. It ran, accessed the phone, then said it couldn't update my phone.
I'm not sure where to turn next. If there is a post or FAQ somewhere that addresses this please point me to it. If you have something for me to try, I'm ready and willing.
--edit - found the program I mentioned above. ROM Update Utility 1.0.2.10, trying to change from image version 2.3.651.2 to 2.27.651.6. I found the program here:
forums.androidcentral.com/htc-hero-rooting-roms-hacks/56118-how-root-your-sprint-hero-one-click (html)
What hboot do you have ? What radio? What software ver? Also what carrier are you with?
#Root-Hack_Mod*Always=SG3
laie1472 said:
What hboot do you have ? What radio? What software ver? Also what carrier are you with?
#Root-Hack_Mod*Always=SG3
Click to expand...
Click to collapse
The phone is Sprint, but I am not connected to any carrier. I'm only using it on WiFi.
Not sure what hboot is or how to tell what my radio is.
Software Number is 2.3.651.2 as mentioned in my first post, though I guess it was buried a bit.
minidrag said:
The phone is Sprint, but I am not connected to any carrier. I'm only using it on WiFi.
Not sure what hboot is or how to tell what my radio is.
Software Number is 2.3.651.2 as mentioned in my first post, though I guess it was buried a bit.
Click to expand...
Click to collapse
You need to install rom manager 2.5 when first rooting sprint. search for it on the web or here at xda.
jamstewonline said:
You need to install rom manager 2.5 when first rooting sprint. search for it on the web or here at xda.
Click to expand...
Click to collapse
Thanks! That version installed. Now I just need to get to where I have WiFi to see if the rest works, but I'm very hopeful.
Thanks again.
ROM Manager 2.5 installed just fine. It grabbed a Recovery (clockwork-2.5.0.7 I believe) and installed it for me. I booted to that and installed the ROM I had on the SD card - Cyanogen 7.2.0 which seemed to go fine.
Then I had a bit of a scare. The phone rebooted and I got a Cyanogen animated logo and nothing else. No buttons did anything - I couldn't even power off. Had to pull the battery for that. Put it back in, powered on, same thing.
Booted to Recovery and it was the built in one, not Clockwork, but based on some reading I did a Wipe and after that the phone booted to Cyanogen.
Thanks for the help!
I unlocked/rooted/installed the stock Android ROM via the All-in-one tool yesterday. Everything went well, except I was getting some errors in Android with the stock ROM, specifically with the phone and media applications. They were both crashing. I read in the ROM thread that you have to flash the radio to get rid of the phone error. Well, I didn't read that before I loaded everything so that .zip wasn't on the phone itself.
Now the phone doesn't show up in Windows, or if it does, it shows up as a CD-ROM drive that I cannot access. I tried flashing it with ADB, but I'm having issues with that as well. When I plug in the phone, I can do "adb devices", and it shows up fine. Reboot into the bootloader/fastboot, everything is fine. Then as soon as I try to do anything, flash the radio, push the .zip to the phone, I get "error: device not found", and I can no longer run any commands on the phone until I reboot the phone and end adb.exe via task manager. Then the cycle continues.
I'm normally pretty good with these things, but I'm stumped here. I've used Android devices in the past, but was an iPhone user for a long time and now I'm coming back and it looks like a lot of this stuff has changed.
Any help is appreciated, at this point my phone is pretty much useless
Thanks!
EDIT: I should also note that I can sometimes get the radio flash to go through, but then I get a "FAILED (remote: signature verify fail).
smaug8821 said:
I unlocked/rooted/installed the stock Android ROM via the All-in-one tool yesterday. Everything went well, except I was getting some errors in Android with the stock ROM, specifically with the phone and media applications. They were both crashing. I read in the ROM thread that you have to flash the radio to get rid of the phone error. Well, I didn't read that before I loaded everything so that .zip wasn't on the phone itself.
Now the phone doesn't show up in Windows, or if it does, it shows up as a CD-ROM drive that I cannot access. I tried flashing it with ADB, but I'm having issues with that as well. When I plug in the phone, I can do "adb devices", and it shows up fine. Reboot into the bootloader/fastboot, everything is fine. Then as soon as I try to do anything, flash the radio, push the .zip to the phone, I get "error: device not found", and I can no longer run any commands on the phone until I reboot the phone and end adb.exe via task manager. Then the cycle continues.
I'm normally pretty good with these things, but I'm stumped here. I've used Android devices in the past, but was an iPhone user for a long time and now I'm coming back and it looks like a lot of this stuff has changed.
Any help is appreciated, at this point my phone is pretty much useless
Thanks!
EDIT: I should also note that I can sometimes get the radio flash to go through, but then I get a "FAILED (remote: signature verify fail).
Click to expand...
Click to collapse
Hey, want me to take a look on TeamViewer?
Matt said:
Hey, want me to take a look on TeamViewer?
Click to expand...
Click to collapse
Sure, let me set it up on that machine. I have it on a computer at work right now.
You use any IM programs? I basically use them all.
smaug8821 said:
Sure, let me set it up on that machine. I have it on a computer at work right now.
You use any IM programs? I basically use them all.
Click to expand...
Click to collapse
Hangouts really