HTC suddenly plays no more MP3s - Tilt, TyTN II, MDA Vario III General

I did a soft reset today, and after that my Kaiser wont play MP3s as Ringtones or via File Explorer (selecting an MP3 as Ringtone has no effect, it plays the "Windows Mobile Ring" Midi File). When selecting an MP3 via File Explorer it says that there is no program associated to this file extension (the symbol in the file explorer for mp3s also looks like unknown file type (the white rectangle with the windows symbol in it). When starting any MP3 Player (GS Player, Mediaplayer, Audiomanager) it plays every MP3 on the Phone properly. But when selecting an file via Fileexplorer or as Ringtone it wont work (WMA or WAV are still working as Ring by the way).

Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David

winthropdc: Dude, you're awesome.
Long Story:
My phone never rang when my brother called me at lunch time. I assumed forever that it was bad signal in my office. Turns out he's the last holdout in my contacts that has a midi ringtone (never changed it because I was used to that being him). I tried checking it finally and low and behold, only the most polyphonic of my ringtones worked... but the musical key was way lower than it was supposed to be on the few instruments that were actually playing.
Short Story:
I found your fix and now my midi ringtones work again.
Here's what confuses me:
Where did these come from?
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandl ers\{DDDC2AE0-9CA8-4fbb-A7B0-088B6D202749}]
@="Ring Tone Plugin Player"
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandl ers\{FB6D5104-86AC-4f81-8382-237125FF82CE}]
@="RingTone-Plugin Player EX2"
I can only assume that something I installed hacked up that part of my registry, but any ideas what or why?

Related

No more mp3 as ringtone

I can't assign mp3's as ringtones anymore for some reason.
They used to work, but now Windows doesn't allow me to even select them from the list of all available ringtones (they are listed, but when selecting them and pressing "ok", Windows automatically selects the next song from the list, which is in mwa format)
When I convert my mp3's to mwa, they can be played.
No one having the same kind of problems?
I can't set mp3's as ringtones or sms-sound. But I can play those same mp3's with AudioManager, with Mediaplayer, TCPMP and with Gsplayer.
Wav and mwa files can still be used (lucky me)
Is there perhaps a default player or some setting in the register that points to a default player that needs adjustment?
Had same problem before
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
I have my mp3s associated with tcpmp and can assign them as a ringtone just fine. Not sure how you are assigning them, but this is how I do it.
Open file explorer, browse to mp3s, click-hold the mp3 I want as ringtone, choose "set as ringtone" from the context menu.
VidMan said:
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
Click to expand...
Click to collapse
Ahh, thanks a lot. That seems to be it!
At least I was thinking in the good direction with that default player
VidMan said:
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
Click to expand...
Click to collapse
This is exactly what I did when I had the same problem. Those file associations will cause you some problems.
meorah said:
I have my mp3s associated with tcpmp and can assign them as a ringtone just fine. Not sure how you are assigning them, but this is how I do it.
Open file explorer, browse to mp3s, click-hold the mp3 I want as ringtone, choose "set as ringtone" from the context menu.
Click to expand...
Click to collapse
If it works just fine with you with TCPMP, then the problem must lie with Gsplayer, since that was my default player for mp3's.
Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David

Problem changing Ringtone

This is driving me mad! For the life of me my Kaiser won't let me change the phone's ringtone from the standard. When I open an MP3 in audiomanager then choose set as ringtone, I get the error message "there was an error copying the ring tone to \my documents\ my ringtones. The ringtone could not be set. Please verify you have enough room on your device and try again", i've even tried manually copying mp3's to the \my ringtones directory, I can view them but they don't play in the ringtone selection screen (they play OK in audiomanager), even if I select a different mp3 in the sounds and notifications screen and select OK, my kaiser defaults automatically back to the standard ringtone. Oh, there's loads of space free as well - about 47mb.
Any ideas?
mp3 extension
Did you change the program for the .mp3 extension?
I noticed the same behaviour when I assigned the mp3 extensions to MortPlayer:
my ringtone would revert back to the default and choosing the mp3 ringtone wouldn't work.
After unchecking the mp3 extension within MortPlayer, I could choose a mp3 ringtone again.
Thanks a lot dude - will give this a go.

lost fileassociation for .mp3

Hi,
after try and fail of the Vibe player (or something similar), because i don't like the media player the fileassociation is lost.
How can i rearrange the files back to the MP?
And another question is there any player wich is similar to Winamp?
or any other good advice for playing mp3?
THANKS!!
OK... To find out how to change the File Assocs was easy. When i start investing some more time in it.
But(Why is there always a but?) when changing the File Assoc now mediaplayer starts, but with an error. It says that the Path is not correct.
In the properties of the playlist item i can see that "/Internal Storage/Music/ is missing so i entered these values manually in front of the %1 parameter.
But... that doesnt change anything. The Path will no be recognized.
How can i do that?
Thanks!
So... at least i found out myself...
Just set the %1 in parameters into doublequotes (").
That was all...
And for refreshing WMP library just close WMP.
Delete MSMETADATA and WMDRM directories from Internal Storage.
Start WMP again and refresh library.
mp3 file associations - RSS Hub and TF3D player
1st_Xypher,
I have a related issue with mp3 file assocations.
For me, I use RSS Hub to automatically download my mp3 podcasts, but the problem is, is when I click on the podcast in RSS Hub (after it is downloaded, WMP is launched to play it).
I don't want WMP to launch and play the podcast, I want TF3D player to play the podcast.
So, I think I have to:
1) change the mp3 file assocation in Windows mobile to TF3D - but I have no idea where to do this. I have looked in the registry but I am a bit of a lamen.
2) Mod the registry for RSS Hub, but again, I don't know how to do this.
Do you experience similiar issues with RSS Hub? and do you have any suggestions?
Thanks.
I have the same problem.
My file association for MP3 is gone. No idea how to get it back.
All my ringtones that ive used now dont work and the phone uses the default windows ringtone when i get a call.
sigh
The same thing happened to me when I installed a media player. I used total commander to fix the association, it worked.
However, media player can play .mp3 but I cannot use .mp3 as ringtones???I can select them, but they will not play. The default phone ringtones are .wma, how can I use .mp3 ones??
Bump...this is so important..!!
Garret said:
The same thing happened to me when I installed a media player. I used total commander to fix the association, it worked.
However, media player can play .mp3 but I cannot use .mp3 as ringtones???I can select them, but they will not play. The default phone ringtones are .wma, how can I use .mp3 ones??
Click to expand...
Click to collapse
Use the File Explorer(Not 3rd party File Explorere) from /Start/Programs, goto the Music folder where you place your .mp3 file. Click & Hold, a drop-panel appeal select "Set as ringtone"
Hmm...thanks man, but there is no such choice...
I only get:
"cut,copy, rename,delete,send, beam file" .....
any other ideas guys??
....bump...
Why don't you try Schaps Advanced Config?? on the right context menu there's an option File Associations??
That should do the trick....so start advanced config and tap on 'menu' and then File associations
Hope this will help you all..
Greetzz Jeroen
...the association is fixed, I can select and play .mp3 files now with media player BUT when I select them as contact ringtones (in the contacts information tab) they WON'T FUNCTION...no sound, NOTHING...while the default .wma ringtones work fine...
other ideas??
i got a similar problem but its with image files. I recently installed coreplayer and it took the file extentions jpg jpeg png etc over i removed them from coreplayer and now none work with i click on them. I will give this mentioned total commander a try and that other one. I hope one of them works!!!

HTC Audio Manager cannot play associated MP3

Hallo, I have problem with file association for HTC Audio Manager.
When I set .mp3 [audiomanager.exe "%1"] in Advanced Configuration Tool (File associations section ) and launch .mp3 file example from File Explorer, Audio manager run, but without playing. On screen is old mp3 file from previos playing...
When I set .mp3 back to [WMPlayer.exe "%1"] and launch some .mp3 file, Windows media player run and play .mp3 file which I select. It is correct.
I need to run .MP3 file and launch and play it with Audiomanager, not WMP.
Help me, please.
you don't need to associate mp3s unless you want to associate a certain program to play it while browsing in a file explorer.by default audiomanager will detect the mp3 in the library and should play it back with no issues
Thanks for replay. Unfortunately, I need to associate MP3 with Audio Manager.
I use pRSSread for downloading and managing podcasts. When I run podcast from this program (it is same like run from File Manager), only WinMedia play podcast correct. Audio Manager open itself, but do not play selected file, see my previous post. :-(
I want to play MP3 from pRSSread on Audio manager. This program is more comfortable, powerful volume, nice bar on HTC Home, display MP3 tags, ...
Is there anybody, who can run MP3 in file manager and Audio Manager open and play?
It is strange, that I am alone with wants of this function...
Thank you!
Nope you're not alone. I just stumbled upon this thread searching for the exact same answer for the exact same reason... this problem is so freaking annoying. I'd rather have it launch into HTC's Audio Manager because I love the UI compared to all others players I've used. Plus I can turn off the display, and it keeps playing, if I could figure out how to make Windows Media Player do this instead of stop playing the podcast than I might settle for that as a work around.
Another annoying thing you may have noticed is it doesn't support PLS files either.
Termiter said:
Is there anybody, who can run MP3 in file manager and Audio Manager open and play?
It is strange, that I am alone with wants of this function...
Thank you!
Click to expand...
Click to collapse
After trying to open an .mp3 file directly with audiomanager (using Resco Explorer) it stoped working.... Now it does open, but it skips all files in the library one by one, not playing even one of them.... whats happening??? any solution?
Termiter said:
Thanks for replay. Unfortunately, I need to associate MP3 with Audio Manager.
I use pRSSread for downloading and managing podcasts. When I run podcast from this program (it is same like run from File Manager), only WinMedia play podcast correct. Audio Manager open itself, but do not play selected file, see my previous post. :-(
I want to play MP3 from pRSSread on Audio manager. This program is more comfortable, powerful volume, nice bar on HTC Home, display MP3 tags, ...
Click to expand...
Click to collapse
I fully agree with you... after hard resetting my P3300 Audio Manager is not able to find any titles to play! I spent a long time playing with playlist editors and trying to copy music files to almost every location but it still does not seem to work. I read it does not play files which does not have id3 tags and also it plays files only from device - not the storage card. Further analysis could get me the real cause of the problem but I am already exhausted. Any help guys? Do drop me a note please

mp3d file problems

I downloaded some ringtones a while back. The majority of them were mp3d files. They worked for my phone ringtone, my new text notifications, or pretty much everything I needed them too and I could listen to them in the Windows Media Player on my Kaiser.
Just today, my phone crashed or something. Basically, it just stopped working. The screen went Red, Blue, Green, across the top half, and the bottom was white and sometimes it would say "Serial." I took it in and they gave me a new one because I was still under warrantee.
None of those ringtones work now. They won't work in Windows Media Player and when I put them in the "Ring" folder, they show up in the list, but don't play when selected in the "Sounds and Notifications" menu.
Does anyone know how I can fix this? I can't even open the ringtones up on the computer and try to convert and I can't find a mp3d converter anywhere.
Is there a codec I can download, or a converter, or anything?
Thanks ahead of time.
One solution maybe to download a program on your pc that can play mp3d files (maybe winamp can?) then restart your pc once you've found one that plays em. Once restarted the file type should be in your file types list. Then in Activesync navigate to Edit file conversion settings and select mp3d files to be converted to mp3 files when you sync them to your phone. Im not 100% sure if this would work as the activesync file converter is probably very basic, Good luck though!

Categories

Resources